예제 #1
0
static int suspend(bool do_deepsleep)
{
	bool pins_force = pins_suspend_force_mux && pins_suspend_force;
	int ret = 0;
	u32 pending_irq;

	if (suspend_sleep_is_blocked()) {
		pr_info("suspend/resume: interrupted by modem.\n");
		return -EBUSY;
	}

	if (has_wake_lock(WAKE_LOCK_SUSPEND)) {
		pr_info("suspend/resume: aborted. wakelock has been taken.\n");
		return -EBUSY;
	}

	nmk_gpio_clocks_enable();

	ux500_suspend_dbg_add_wake_on_uart();

	nmk_gpio_wakeups_suspend();

	/* configure the prcm for a sleep wakeup */
	prcmu_enable_wakeups(suspend_wakeups);

	ux500_suspend_dbg_test_set_wakeup();

	context_vape_save();

	if (pins_force) {
		/*
		 * Save GPIO settings before applying power save
		 * settings
		 */
		context_gpio_save();

		/* Apply GPIO power save mux settings */
		context_gpio_mux_safe_switch(true);
		pins_suspend_force_mux();
		context_gpio_mux_safe_switch(false);

		/* Apply GPIO power save settings */
		pins_suspend_force();
	}

	ux500_pm_gic_decouple();

	/* Copy GIC interrupt settings to PRCMU interrupt settings */
	ux500_pm_prcmu_copy_gic_settings();

	if (ux500_pm_gic_pending_interrupt()) {
		pr_info("suspend/resume: pending interrupt gic\n");

		/* Recouple GIC with the interrupt bus */
		ux500_pm_gic_recouple();
		ret = -EBUSY;

		goto exit;
	}

	if (ux500_pm_prcmu_pending_interrupt(&pending_irq)) {
		pr_info("suspend/resume: pending interrupt prcmu: %u\n",
				pending_irq);

		/* Recouple GIC with the interrupt bus */
		ux500_pm_gic_recouple();
		ret = -EBUSY;

		goto exit;
	}
	ux500_pm_prcmu_set_ioforce(true);

	if (do_deepsleep) {
		context_varm_save_common();
		context_varm_save_core();
		context_gic_dist_disable_unneeded_irqs();
		context_save_cpu_registers();

		/*
		 * Due to we have only 100us between requesting a powerstate
		 * and wfi, we clean the cache before as well to assure the
		 * final cache clean before wfi has as little as possible to
		 * do.
		 */
		context_clean_l1_cache_all();

		(void) prcmu_set_power_state(PRCMU_AP_DEEP_SLEEP,
					     false, false);
		context_save_to_sram_and_wfi(true);

		context_restore_cpu_registers();
		context_varm_restore_core();
		context_varm_restore_common();

	} else {

		context_clean_l1_cache_all();
		(void) prcmu_set_power_state(PRCMU_AP_SLEEP,
					     false, false);
		dsb();
		__asm__ __volatile__("wfi\n\t" : : : "memory");
	}

	context_vape_restore();

	/* If GPIO woke us up then save the pins that caused the wake up */
	ux500_pm_gpio_save_wake_up_status();

	ux500_suspend_dbg_sleep_status(do_deepsleep);

	/* APE was turned off, restore IO ring */
	ux500_pm_prcmu_set_ioforce(false);

exit:
	if (pins_force) {
		/* Restore gpio settings */
		context_gpio_mux_safe_switch(true);
		context_gpio_restore_mux();
		context_gpio_mux_safe_switch(false);
		context_gpio_restore();
	}

	/* Configure the prcmu with the wake-ups that cpuidle needs */
	prcmu_enable_wakeups(running_wakeups);

	nmk_gpio_wakeups_resume();

	ux500_suspend_dbg_remove_wake_on_uart();

	nmk_gpio_clocks_disable();

	return ret;
}
예제 #2
0
static int suspend(bool do_deepsleep)
{
	bool pins_force = pins_suspend_force_mux && pins_suspend_force;
	int ret = 0;

	if (sleep_is_blocked()) {
		pr_info("suspend/resume: interrupted by modem(%d) or event(%d)\n",
			atomic_read(&block_sleep_modem),
			atomic_read(&block_sleep_event));
		return -EBUSY;
	}

	if (has_wake_lock(WAKE_LOCK_SUSPEND)) {
		pr_info("suspend/resume: wakelock has been locked!\n");
		return -EBUSY;
	}

	nmk_gpio_clocks_enable();

	ux500_suspend_dbg_add_wake_on_uart();
	nmk_gpio_wakeups_suspend();

	/* configure the prcm for a sleep wakeup */
	prcmu_enable_wakeups(PRCMU_WAKEUP(ABB) | PRCMU_WAKEUP(RTC));

	ux500_rtcrtt_next_seconds(alarm_sec);

	context_vape_save();

	if (pins_force) {
		/*
		 * Save GPIO settings before applying power save
		 * settings
		 */
		context_gpio_save();

		/* Apply GPIO power save mux settings */
		context_gpio_mux_safe_switch(true);
		pins_suspend_force_mux();
		context_gpio_mux_safe_switch(false);

		/* Apply GPIO power save settings */
		pins_suspend_force();
	}

	ux500_pm_gic_decouple();

	if (ux500_pm_gic_pending_interrupt()) {
		pr_info("suspend/resume: pending interrupt\n");

		/* Recouple GIC with the interrupt bus */
		ux500_pm_gic_recouple();
		ret = -EBUSY;

		goto exit;
	}
	ux500_pm_prcmu_set_ioforce(true);

	if (do_deepsleep) {
		context_varm_save_common();
		context_varm_save_core();
		context_gic_dist_disable_unneeded_irqs();
		context_save_cpu_registers();

		/*
		 * Due to we have only 100us between requesting a powerstate
		 * and wfi, we clean the cache before as well to assure the
		 * final cache clean before wfi has as little as possible to
		 * do.
		 */
		context_clean_l1_cache_all();

		(void) prcmu_set_power_state(PRCMU_AP_DEEP_SLEEP,
					     false, false);
		context_save_to_sram_and_wfi(true);

		context_restore_cpu_registers();
		context_varm_restore_core();
		context_varm_restore_common();

	} else {

		context_clean_l1_cache_all();
		(void) prcmu_set_power_state(APEXECUTE_TO_APSLEEP,
					     false, false);
		dsb();
		__asm__ __volatile__("wfi\n\t" : : : "memory");
	}

	context_vape_restore();

	/* If GPIO woke us up then save the pins that caused the wake up */
	ux500_pm_gpio_save_wake_up_status();

	ux500_suspend_dbg_sleep_status(do_deepsleep);

	/* APE was turned off, restore IO ring */
	ux500_pm_prcmu_set_ioforce(false);

exit:
	if (pins_force) {
		/* Restore gpio settings */
		context_gpio_mux_safe_switch(true);
		context_gpio_restore_mux();
		context_gpio_mux_safe_switch(false);
		context_gpio_restore();
	}

	ux500_rtcrtt_off();

	/* This is what cpuidle wants */
	prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
			     PRCMU_WAKEUP(ABB));

	nmk_gpio_wakeups_resume();
	ux500_suspend_dbg_remove_wake_on_uart();

	nmk_gpio_clocks_disable();

	return ret;
}