/*
* Post-authentication step processes the response before it is
* sent to the NAS. It can receive both Access-Accept and Access-Reject
* replies.
*/
int rad_postauth(REQUEST *request)
{
int result;
int postauth_type = 0;
VALUE_PAIR *vp;
/*
* Do post-authentication calls. ignoring the return code.
*/
vp = pairfind(request->config, PW_POST_AUTH_TYPE, 0, TAG_ANY);
if (vp) {
postauth_type = vp->vp_integer;
RDEBUG2("Using Post-Auth-Type %s",
dict_valnamebyattr(PW_POST_AUTH_TYPE, 0, postauth_type));
}
result = process_post_auth(postauth_type, request);
switch (result) {
/*
* The module failed, or said to reject the user: Do so.
*/
case RLM_MODULE_FAIL:
case RLM_MODULE_INVALID:
case RLM_MODULE_REJECT:
case RLM_MODULE_USERLOCK:
default:
request->reply->code = PW_CODE_ACCESS_REJECT;
fr_state_discard(request, request->packet);
result = RLM_MODULE_REJECT;
break;
/*
* The module handled the request, cancel the reply.
*/
case RLM_MODULE_HANDLED:
/* FIXME */
break;
/*
* The module had a number of OK return codes.
*/
case RLM_MODULE_NOOP:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_OK:
case RLM_MODULE_UPDATED:
result = RLM_MODULE_OK;
if (request->reply->code == PW_CODE_ACCESS_CHALLENGE) {
fr_state_put_vps(request, request->packet, request->reply);
} else {
fr_state_discard(request, request->packet);
}
break;
}
return result;
}
/*
* Post-authentication step processes the response before it is
* sent to the NAS. It can receive both Access-Accept and Access-Reject
* replies.
*/
int rad_postauth(REQUEST *request)
{
int result;
int postauth_type = 0;
VALUE_PAIR *vp;
/*
* Do post-authentication calls. ignoring the return code.
*/
vp = pairfind(request->config_items, PW_POST_AUTH_TYPE);
if (vp) {
RDEBUG2("Using Post-Auth-Type %s",
dict_valnamebyattr(PW_POST_AUTH_TYPE, vp->vp_integer));
postauth_type = vp->vp_integer;
}
result = module_post_auth(postauth_type, request);
switch (result) {
/*
* The module failed, or said to reject the user: Do so.
*/
case RLM_MODULE_FAIL:
case RLM_MODULE_INVALID:
case RLM_MODULE_REJECT:
case RLM_MODULE_USERLOCK:
default:
request->reply->code = PW_AUTHENTICATION_REJECT;
result = RLM_MODULE_REJECT;
break;
/*
* The module handled the request, cancel the reply.
*/
case RLM_MODULE_HANDLED:
/* FIXME */
break;
/*
* The module had a number of OK return codes.
*/
case RLM_MODULE_NOOP:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_OK:
case RLM_MODULE_UPDATED:
result = RLM_MODULE_OK;
break;
}
return result;
}
/*
* rad_accounting: call modules.
*
* The return value of this function isn't actually used right now, so
* it's not entirely clear if it is returning the right things. --Pac.
*/
int rad_accounting(REQUEST *request)
{
int result = RLM_MODULE_OK;
#ifdef WITH_PROXY
#define WAS_PROXIED (request->proxy)
#else
#define WAS_PROXIED (0)
#endif
/*
* Run the modules only once, before proxying.
*/
if (!WAS_PROXIED) {
VALUE_PAIR *vp;
int acct_type = 0;
result = module_preacct(request);
switch (result) {
/*
* The module has a number of OK return codes.
*/
case RLM_MODULE_NOOP:
case RLM_MODULE_OK:
case RLM_MODULE_UPDATED:
break;
/*
* The module handled the request, stop here.
*/
case RLM_MODULE_HANDLED:
return result;
/*
* The module failed, or said the request is
* invalid, therefore we stop here.
*/
case RLM_MODULE_FAIL:
case RLM_MODULE_INVALID:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_REJECT:
case RLM_MODULE_USERLOCK:
default:
return result;
}
/*
* Do the data storage before proxying. This is to ensure
* that we log the packet, even if the proxy never does.
*/
vp = fr_pair_find_by_num(request->config, PW_ACCT_TYPE, 0, TAG_ANY);
if (vp) {
acct_type = vp->vp_integer;
DEBUG2(" Found Acct-Type %s",
dict_valnamebyattr(PW_ACCT_TYPE, 0, acct_type));
}
result = process_accounting(acct_type, request);
switch (result) {
/*
* In case the accounting module returns FAIL,
* it's still useful to send the data to the
* proxy.
*/
case RLM_MODULE_FAIL:
case RLM_MODULE_NOOP:
case RLM_MODULE_OK:
case RLM_MODULE_UPDATED:
break;
/*
* The module handled the request, don't reply.
*/
case RLM_MODULE_HANDLED:
return result;
/*
* Neither proxy, nor reply to invalid requests.
*/
case RLM_MODULE_INVALID:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_REJECT:
case RLM_MODULE_USERLOCK:
default:
return result;
}
/*
* Maybe one of the preacct modules has decided
* that a proxy should be used.
*/
if ((vp = fr_pair_find_by_num(request->config, PW_PROXY_TO_REALM, 0, TAG_ANY))) {
REALM *realm;
/*
* Check whether Proxy-To-Realm is
* a LOCAL realm.
*/
realm = realm_find2(vp->vp_strvalue);
if (realm && !realm->acct_pool) {
DEBUG("rad_accounting: Cancelling proxy to realm %s, as it is a LOCAL realm.", realm->name);
fr_pair_delete_by_num(&request->config, PW_PROXY_TO_REALM, 0, TAG_ANY);
} else {
/*
* Don't reply to the NAS now because
* we have to send the proxied packet
* before that.
*/
return result;
}
}
}
#ifdef WITH_PROXY
/*
* We didn't see a reply to the proxied request. Fail.
*/
if (request->proxy && !request->proxy_reply) return RLM_MODULE_FAIL;
#endif
/*
* We get here IF we're not proxying, OR if we've
* received the accounting reply from the end server,
* THEN we can reply to the NAS.
* If the accounting module returns NOOP, the data
* storage did not succeed, so radiusd should not send
* Accounting-Response.
*/
switch (result) {
/*
* Send back an ACK to the NAS.
*/
case RLM_MODULE_OK:
case RLM_MODULE_UPDATED:
request->reply->code = PW_CODE_ACCOUNTING_RESPONSE;
break;
/*
* Failed to log or to proxy the accounting data,
* therefore don't reply to the NAS.
*/
case RLM_MODULE_FAIL:
case RLM_MODULE_INVALID:
case RLM_MODULE_NOOP:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_REJECT:
case RLM_MODULE_USERLOCK:
default:
break;
}
return result;
}
/*
* Make sure user/pass are clean
* and then log them
*/
static int rad_authlog(const char *msg, REQUEST *request, int goodpass)
{
int logit;
const char *extra_msg = NULL;
char clean_password[1024];
char clean_username[1024];
char buf[1024];
char extra[1024];
VALUE_PAIR *username = NULL;
if (!request->root->log_auth) {
return 0;
}
/*
* Get the correct username based on the configured value
*/
if (log_stripped_names == 0) {
username = pairfind(request->packet->vps, PW_USER_NAME);
} else {
username = request->username;
}
/*
* Clean up the username
*/
if (username == NULL) {
strcpy(clean_username, "<no User-Name attribute>");
} else {
fr_print_string((char *)username->vp_strvalue,
username->length,
clean_username, sizeof(clean_username));
}
/*
* Clean up the password
*/
if (request->root->log_auth_badpass || request->root->log_auth_goodpass) {
if (!request->password) {
VALUE_PAIR *auth_type;
auth_type = pairfind(request->config_items,
PW_AUTH_TYPE);
if (auth_type) {
snprintf(clean_password, sizeof(clean_password),
"<via Auth-Type = %s>",
dict_valnamebyattr(PW_AUTH_TYPE,
auth_type->vp_integer));
} else {
strcpy(clean_password, "<no User-Password attribute>");
}
} else if (pairfind(request->packet->vps, PW_CHAP_PASSWORD)) {
strcpy(clean_password, "<CHAP-Password>");
} else {
fr_print_string((char *)request->password->vp_strvalue,
request->password->length,
clean_password, sizeof(clean_password));
}
}
if (goodpass) {
logit = request->root->log_auth_goodpass;
extra_msg = request->root->auth_goodpass_msg;
} else {
logit = request->root->log_auth_badpass;
extra_msg = request->root->auth_badpass_msg;
}
if (extra_msg) {
extra[0] = ' ';
radius_xlat(extra + 1, sizeof(extra) - 1, extra_msg, request,
NULL);
} else {
*extra = '\0';
}
radlog_request(L_AUTH, 0, request, "%s: [%s%s%s] (%s)%s",
msg,
clean_username,
logit ? "/" : "",
logit ? clean_password : "",
auth_name(buf, sizeof(buf), request, 1),
extra);
return 0;
}
/*
* Process and reply to an authentication request
*
* The return value of this function isn't actually used right now, so
* it's not entirely clear if it is returning the right things. --Pac.
*/
int rad_authenticate(REQUEST *request)
{
VALUE_PAIR *namepair;
#ifdef WITH_SESSION_MGMT
VALUE_PAIR *check_item;
#endif
VALUE_PAIR *auth_item = NULL;
VALUE_PAIR *module_msg;
VALUE_PAIR *tmp = NULL;
int result;
const char *password;
char autz_retry = 0;
int autz_type = 0;
password = "";
#ifdef WITH_PROXY
/*
* If this request got proxied to another server, we need
* to check whether it authenticated the request or not.
*/
if (request->proxy_reply) {
switch (request->proxy_reply->code) {
/*
* Reply of ACCEPT means accept, thus set Auth-Type
* accordingly.
*/
case PW_AUTHENTICATION_ACK:
tmp = radius_paircreate(request,
&request->config_items,
PW_AUTH_TYPE, PW_TYPE_INTEGER);
if (tmp) tmp->vp_integer = PW_AUTHTYPE_ACCEPT;
#ifdef WITH_POST_PROXY_AUTHORIZE
if (mainconfig.post_proxy_authorize) break;
#endif
goto authenticate;
/*
* Challenges are punted back to the NAS without any
* further processing.
*/
case PW_ACCESS_CHALLENGE:
request->reply->code = PW_ACCESS_CHALLENGE;
return RLM_MODULE_OK;
/*
* ALL other replies mean reject. (this is fail-safe)
*
* Do NOT do any authorization or authentication. They
* are being rejected, so we minimize the amount of work
* done by the server, by rejecting them here.
*/
case PW_AUTHENTICATION_REJECT:
rad_authlog("Login incorrect (Home Server says so)",
request, 0);
request->reply->code = PW_AUTHENTICATION_REJECT;
return RLM_MODULE_REJECT;
default:
rad_authlog("Login incorrect (Home Server failed to respond)",
request, 0);
return RLM_MODULE_REJECT;
}
}
#endif
/*
* Get the username from the request.
*
* Note that namepair MAY be NULL, in which case there
* is no User-Name attribute in the request.
*/
namepair = request->username;
/*
* Look for, and cache, passwords.
*/
if (!request->password) {
request->password = pairfind(request->packet->vps,
PW_USER_PASSWORD);
}
/*
* Discover which password we want to use.
*/
auth_item = request->password;
if (auth_item) {
password = (const char *)auth_item->vp_strvalue;
} else {
/*
* Maybe there's a CHAP-Password?
*/
if ((auth_item = pairfind(request->packet->vps,
PW_CHAP_PASSWORD)) != NULL) {
password = "******";
} else {
/*
* No password we recognize.
*/
password = "******";
}
}
request->password = auth_item;
/*
* Get the user's authorization information from the database
*/
autz_redo:
result = module_authorize(autz_type, request);
switch (result) {
case RLM_MODULE_NOOP:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_OK:
case RLM_MODULE_UPDATED:
break;
case RLM_MODULE_HANDLED:
return result;
case RLM_MODULE_FAIL:
case RLM_MODULE_INVALID:
case RLM_MODULE_REJECT:
case RLM_MODULE_USERLOCK:
default:
if ((module_msg = pairfind(request->packet->vps,
PW_MODULE_FAILURE_MESSAGE)) != NULL) {
char msg[MAX_STRING_LEN + 16];
snprintf(msg, sizeof(msg), "Invalid user (%s)",
module_msg->vp_strvalue);
rad_authlog(msg,request,0);
} else {
rad_authlog("Invalid user", request, 0);
}
request->reply->code = PW_AUTHENTICATION_REJECT;
return result;
}
if (!autz_retry) {
tmp = pairfind(request->config_items, PW_AUTZ_TYPE);
if (tmp) {
autz_type = tmp->vp_integer;
RDEBUG2("Using Autz-Type %s",
dict_valnamebyattr(PW_AUTZ_TYPE, autz_type));
autz_retry = 1;
goto autz_redo;
}
}
/*
* If we haven't already proxied the packet, then check
* to see if we should. Maybe one of the authorize
* modules has decided that a proxy should be used. If
* so, get out of here and send the packet.
*/
if (
#ifdef WITH_PROXY
(request->proxy == NULL) &&
#endif
((tmp = pairfind(request->config_items, PW_PROXY_TO_REALM)) != NULL)) {
REALM *realm;
realm = realm_find2(tmp->vp_strvalue);
/*
* Don't authenticate, as the request is going to
* be proxied.
*/
if (realm && realm->auth_pool) {
return RLM_MODULE_OK;
}
/*
* Catch users who set Proxy-To-Realm to a LOCAL
* realm (sigh). But don't complain if it is
* *the* LOCAL realm.
*/
if (realm &&(strcmp(realm->name, "LOCAL") != 0)) {
RDEBUG2("WARNING: You set Proxy-To-Realm = %s, but it is a LOCAL realm! Cancelling proxy request.", realm->name);
}
if (!realm) {
RDEBUG2("WARNING: You set Proxy-To-Realm = %s, but the realm does not exist! Cancelling invalid proxy request.", tmp->vp_strvalue);
}
}
#ifdef WITH_PROXY
authenticate:
#endif
/*
* Perhaps there is a Stripped-User-Name now.
*/
namepair = request->username;
/*
* Validate the user
*/
do {
result = rad_check_password(request);
if (result > 0) {
/* don't reply! */
return RLM_MODULE_HANDLED;
}
} while(0);
/*
* Failed to validate the user.
*
* We PRESUME that the code which failed will clean up
* request->reply->vps, to be ONLY the reply items it
* wants to send back.
*/
if (result < 0) {
RDEBUG2("Failed to authenticate the user.");
request->reply->code = PW_AUTHENTICATION_REJECT;
if ((module_msg = pairfind(request->packet->vps,PW_MODULE_FAILURE_MESSAGE)) != NULL){
char msg[MAX_STRING_LEN+19];
snprintf(msg, sizeof(msg), "Login incorrect (%s)",
module_msg->vp_strvalue);
rad_authlog(msg, request, 0);
} else {
rad_authlog("Login incorrect", request, 0);
}
/* double check: maybe the secret is wrong? */
if ((debug_flag > 1) && (auth_item != NULL) &&
(auth_item->attribute == PW_USER_PASSWORD)) {
uint8_t *p;
p = (uint8_t *) auth_item->vp_strvalue;
while (*p) {
int size;
size = fr_utf8_char(p);
if (!size) {
log_debug(" WARNING: Unprintable characters in the password. Double-check the shared secret on the server and the NAS!");
break;
}
p += size;
}
}
}
#ifdef WITH_SESSION_MGMT
if (result >= 0 &&
(check_item = pairfind(request->config_items, PW_SIMULTANEOUS_USE)) != NULL) {
int r, session_type = 0;
char logstr[1024];
char umsg[MAX_STRING_LEN + 1];
const char *user_msg = NULL;
tmp = pairfind(request->config_items, PW_SESSION_TYPE);
if (tmp) {
session_type = tmp->vp_integer;
RDEBUG2("Using Session-Type %s",
dict_valnamebyattr(PW_SESSION_TYPE, session_type));
}
/*
* User authenticated O.K. Now we have to check
* for the Simultaneous-Use parameter.
*/
if (namepair &&
(r = module_checksimul(session_type, request, check_item->vp_integer)) != 0) {
char mpp_ok = 0;
if (r == 2){
/* Multilink attempt. Check if port-limit > simultaneous-use */
VALUE_PAIR *port_limit;
if ((port_limit = pairfind(request->reply->vps, PW_PORT_LIMIT)) != NULL &&
port_limit->vp_integer > check_item->vp_integer){
RDEBUG2("MPP is OK");
mpp_ok = 1;
}
}
if (!mpp_ok){
if (check_item->vp_integer > 1) {
snprintf(umsg, sizeof(umsg),
"\r\nYou are already logged in %d times - access denied\r\n\n",
(int)check_item->vp_integer);
user_msg = umsg;
} else {
user_msg = "\r\nYou are already logged in - access denied\r\n\n";
}
request->reply->code = PW_AUTHENTICATION_REJECT;
/*
* They're trying to log in too many times.
* Remove ALL reply attributes.
*/
pairfree(&request->reply->vps);
radius_pairmake(request, &request->reply->vps,
"Reply-Message",
user_msg, T_OP_SET);
snprintf(logstr, sizeof(logstr), "Multiple logins (max %d) %s",
check_item->vp_integer,
r == 2 ? "[MPP attempt]" : "");
rad_authlog(logstr, request, 1);
result = -1;
}
}
}
#endif
/*
* Result should be >= 0 here - if not, it means the user
* is rejected, so we just process post-auth and return.
*/
if (result < 0) {
return RLM_MODULE_REJECT;
}
/*
* Add the port number to the Framed-IP-Address if
* vp->addport is set.
*/
if (((tmp = pairfind(request->reply->vps,
PW_FRAMED_IP_ADDRESS)) != NULL) &&
(tmp->flags.addport != 0)) {
VALUE_PAIR *vpPortId;
/*
* Find the NAS port ID.
*/
if ((vpPortId = pairfind(request->packet->vps,
PW_NAS_PORT)) != NULL) {
unsigned long tvalue = ntohl(tmp->vp_integer);
tmp->vp_integer = htonl(tvalue + vpPortId->vp_integer);
tmp->flags.addport = 0;
ip_ntoa(tmp->vp_strvalue, tmp->vp_integer);
} else {
RDEBUG2("WARNING: No NAS-Port attribute in request. CANNOT return a Framed-IP-Address + NAS-Port.\n");
pairdelete(&request->reply->vps, PW_FRAMED_IP_ADDRESS);
}
}
/*
* Set the reply to Access-Accept, if it hasn't already
* been set to something. (i.e. Access-Challenge)
*/
if (request->reply->code == 0)
request->reply->code = PW_AUTHENTICATION_ACK;
if ((module_msg = pairfind(request->packet->vps,PW_MODULE_SUCCESS_MESSAGE)) != NULL){
char msg[MAX_STRING_LEN+12];
snprintf(msg, sizeof(msg), "Login OK (%s)",
module_msg->vp_strvalue);
rad_authlog(msg, request, 1);
} else {
rad_authlog("Login OK", request, 1);
}
/*
* Run the modules in the 'post-auth' section.
*/
result = rad_postauth(request);
return result;
}
/*
* Check password.
*
* Returns: 0 OK
* -1 Password fail
* -2 Rejected (Auth-Type = Reject, send Port-Message back)
* 1 End check & return, don't reply
*
* NOTE: NOT the same as the RLM_ values !
*/
static int rad_check_password(REQUEST *request)
{
VALUE_PAIR *auth_type_pair;
VALUE_PAIR *cur_config_item;
VALUE_PAIR *password_pair;
VALUE_PAIR *auth_item;
uint8_t my_chap[MAX_STRING_LEN];
int auth_type = -1;
int result;
int auth_type_count = 0;
result = 0;
/*
* Look for matching check items. We skip the whole lot
* if the authentication type is PW_AUTHTYPE_ACCEPT or
* PW_AUTHTYPE_REJECT.
*/
cur_config_item = request->config_items;
while(((auth_type_pair = pairfind(cur_config_item, PW_AUTH_TYPE))) != NULL) {
auth_type = auth_type_pair->vp_integer;
auth_type_count++;
RDEBUG2("Found Auth-Type = %s",
dict_valnamebyattr(PW_AUTH_TYPE,
auth_type_pair->vp_integer));
cur_config_item = auth_type_pair->next;
if (auth_type == PW_AUTHTYPE_REJECT) {
RDEBUG2("Auth-Type = Reject, rejecting user");
return -2;
}
}
if (( auth_type_count > 1) && (debug_flag)) {
radlog_request(L_ERR, 0, request, "Warning: Found %d auth-types on request for user '%s'",
auth_type_count, request->username->vp_strvalue);
}
/*
* This means we have a proxy reply or an accept
* and it wasn't rejected in the above loop. So
* that means it is accepted and we do no further
* authentication
*/
if ((auth_type == PW_AUTHTYPE_ACCEPT)
#ifdef WITH_PROXY
|| (request->proxy)
#endif
) {
RDEBUG2("Auth-Type = Accept, accepting the user");
return 0;
}
password_pair = pairfind(request->config_items, PW_USER_PASSWORD);
if (password_pair &&
pairfind(request->config_items, PW_CLEARTEXT_PASSWORD)) {
pairdelete(&request->config_items, PW_USER_PASSWORD);
password_pair = NULL;
}
if (password_pair) {
DICT_ATTR *da;
RDEBUG("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
RDEBUG("!!! Replacing User-Password in config items with Cleartext-Password. !!!");
RDEBUG("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
RDEBUG("!!! Please update your configuration so that the \"known good\" !!!");
RDEBUG("!!! clear text password is in Cleartext-Password, and not in User-Password. !!!");
RDEBUG("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
password_pair->attribute = PW_CLEARTEXT_PASSWORD;
da = dict_attrbyvalue(PW_CLEARTEXT_PASSWORD);
if (!da) {
radlog_request(L_ERR, 0, request, "FATAL: You broke the dictionaries. Please use the default dictionaries!");
_exit(1);
}
password_pair->name = da->name;
}
/*
* Find the "known good" password.
*
* FIXME: We should get rid of these hacks, and replace
* them with a module.
*/
if ((password_pair = pairfind(request->config_items, PW_CRYPT_PASSWORD)) != NULL) {
/*
* Re-write Auth-Type, but ONLY if it isn't already
* set.
*/
if (auth_type == -1) auth_type = PW_AUTHTYPE_CRYPT;
} else {
password_pair = pairfind(request->config_items, PW_CLEARTEXT_PASSWORD);
}
if (auth_type < 0) {
if (password_pair) {
auth_type = PW_AUTHTYPE_LOCAL;
} else {
/*
* The admin hasn't told us how to
* authenticate the user, so we reject them!
*
* This is fail-safe.
*/
RDEBUG2("ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user");
return -2;
}
}
switch(auth_type) {
case PW_AUTHTYPE_CRYPT:
RDEBUG2("WARNING: Please update your configuration, and remove 'Auth-Type = Crypt'");
RDEBUG2("WARNING: Use the PAP module instead.");
/*
* Find the password sent by the user. It
* SHOULD be there, if it's not
* authentication fails.
*/
auth_item = request->password;
if (auth_item == NULL) {
RDEBUG2("No User-Password or CHAP-Password attribute in the request");
return -1;
}
if (password_pair == NULL) {
RDEBUG2("No Crypt-Password configured for the user");
rad_authlog("Login incorrect "
"(No Crypt-Password configured for the user)", request, 0);
return -1;
}
switch (fr_crypt_check((char *)auth_item->vp_strvalue,
(char *)password_pair->vp_strvalue)) {
case -1:
rad_authlog("Login incorrect "
"(system failed to supply an encrypted password for comparison)", request, 0);
/* FALL-THROUGH */
case 1:
return -1;
}
break;
case PW_AUTHTYPE_LOCAL:
RDEBUG2("WARNING: Please update your configuration, and remove 'Auth-Type = Local'");
RDEBUG2("WARNING: Use the PAP or CHAP modules instead.");
/*
* Find the password sent by the user. It
* SHOULD be there, if it's not
* authentication fails.
*/
auth_item = request->password;
if (!auth_item)
auth_item = pairfind(request->packet->vps,
PW_CHAP_PASSWORD);
if (!auth_item) {
RDEBUG2("No User-Password or CHAP-Password attribute in the request.");
RDEBUG2("Cannot perform authentication.");
return -1;
}
/*
* Plain text password.
*/
if (password_pair == NULL) {
RDEBUG2("No \"known good\" password was configured for the user.");
RDEBUG2("As a result, we cannot authenticate the user.");
rad_authlog("Login incorrect "
"(No password configured for the user)", request, 0);
return -1;
}
/*
* Local password is just plain text.
*/
if (auth_item->attribute == PW_USER_PASSWORD) {
if (strcmp((char *)password_pair->vp_strvalue,
(char *)auth_item->vp_strvalue) != 0) {
RDEBUG2("User-Password in the request does NOT match \"known good\" password.");
return -1;
}
RDEBUG2("User-Password in the request is correct.");
break;
} else if (auth_item->attribute != PW_CHAP_PASSWORD) {
RDEBUG2("The user did not supply a User-Password or a CHAP-Password attribute");
rad_authlog("Login incorrect "
"(no User-Password or CHAP-Password attribute)", request, 0);
return -1;
}
rad_chap_encode(request->packet, my_chap,
auth_item->vp_octets[0], password_pair);
/*
* Compare them
*/
if (memcmp(my_chap + 1, auth_item->vp_strvalue + 1,
CHAP_VALUE_LENGTH) != 0) {
RDEBUG2("CHAP-Password is incorrect.");
return -1;
}
RDEBUG2("CHAP-Password is correct.");
break;
default:
/*
* See if there is a module that handles
* this type, and turn the RLM_ return
* status into the values as defined at
* the top of this function.
*/
result = module_authenticate(auth_type, request);
switch (result) {
/*
* An authentication module FAIL
* return code, or any return code that
* is not expected from authentication,
* is the same as an explicit REJECT!
*/
case RLM_MODULE_FAIL:
case RLM_MODULE_INVALID:
case RLM_MODULE_NOOP:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_REJECT:
case RLM_MODULE_UPDATED:
case RLM_MODULE_USERLOCK:
default:
result = -1;
break;
case RLM_MODULE_OK:
result = 0;
break;
case RLM_MODULE_HANDLED:
result = 1;
break;
}
break;
}
return result;
}
/*
* Check password.
*
* Returns: 0 OK
* -1 Password fail
* -2 Rejected (Auth-Type = Reject, send Port-Message back)
* 1 End check & return, don't reply
*
* NOTE: NOT the same as the RLM_ values !
*/
static int rad_check_password(REQUEST *request)
{
VALUE_PAIR *auth_type_pair;
VALUE_PAIR *cur_config_item;
int auth_type = -1;
int result;
int auth_type_count = 0;
result = 0;
/*
* Look for matching check items. We skip the whole lot
* if the authentication type is PW_AUTHTYPE_ACCEPT or
* PW_AUTHTYPE_REJECT.
*/
cur_config_item = request->config_items;
while(((auth_type_pair = pairfind(cur_config_item, PW_AUTH_TYPE, 0, TAG_ANY))) != NULL) {
auth_type = auth_type_pair->vp_integer;
auth_type_count++;
RDEBUG2("Found Auth-Type = %s",
dict_valnamebyattr(PW_AUTH_TYPE, 0, auth_type));
cur_config_item = auth_type_pair->next;
if (auth_type == PW_AUTHTYPE_REJECT) {
RDEBUG2("Auth-Type = Reject, rejecting user");
return -2;
}
}
/*
* Warn if more than one Auth-Type was found, because only the last
* one found will actually be used.
*/
if (( auth_type_count > 1) && (debug_flag)) {
radlog_request(L_ERR, 0, request, "Warning: Found %d auth-types on request for user '%s'",
auth_type_count, request->username->vp_strvalue);
}
/*
* This means we have a proxy reply or an accept and it wasn't
* rejected in the above loop. So that means it is accepted and we
* do no further authentication.
*/
if ((auth_type == PW_AUTHTYPE_ACCEPT)
#ifdef WITH_PROXY
|| (request->proxy)
#endif
) {
RDEBUG2("Auth-Type = Accept, accepting the user");
return 0;
}
/*
* Check that Auth-Type has been set, and reject if not.
*
* Do quick checks to see if Cleartext-Password or Crypt-Password have
* been set, and complain if so.
*/
if (auth_type < 0) {
if (pairfind(request->config_items, PW_CRYPT_PASSWORD, 0, TAG_ANY) != NULL) {
RDEBUG2W("Please update your configuration, and remove 'Auth-Type = Crypt'");
RDEBUG2W("Use the PAP module instead.");
}
else if (pairfind(request->config_items, PW_CLEARTEXT_PASSWORD, 0, TAG_ANY) != NULL) {
RDEBUG2W("Please update your configuration, and remove 'Auth-Type = Local'");
RDEBUG2W("Use the PAP or CHAP modules instead.");
}
/*
* The admin hasn't told us how to
* authenticate the user, so we reject them!
*
* This is fail-safe.
*/
RDEBUG2E("No Auth-Type found: rejecting the user via Post-Auth-Type = Reject");
return -2;
}
/*
* See if there is a module that handles
* this Auth-Type, and turn the RLM_ return
* status into the values as defined at
* the top of this function.
*/
result = module_authenticate(auth_type, request);
switch (result) {
/*
* An authentication module FAIL
* return code, or any return code that
* is not expected from authentication,
* is the same as an explicit REJECT!
*/
case RLM_MODULE_FAIL:
case RLM_MODULE_INVALID:
case RLM_MODULE_NOOP:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_REJECT:
case RLM_MODULE_UPDATED:
case RLM_MODULE_USERLOCK:
default:
result = -1;
break;
case RLM_MODULE_OK:
result = 0;
break;
case RLM_MODULE_HANDLED:
result = 1;
break;
}
return result;
}
/*
* Process and reply to an authentication request
*
* The return value of this function isn't actually used right now, so
* it's not entirely clear if it is returning the right things. --Pac.
*/
int rad_authenticate(REQUEST *request)
{
#ifdef WITH_SESSION_MGMT
VALUE_PAIR *check_item;
#endif
VALUE_PAIR *module_msg;
VALUE_PAIR *tmp = NULL;
int result;
char autz_retry = 0;
int autz_type = 0;
#ifdef WITH_PROXY
/*
* If this request got proxied to another server, we need
* to check whether it authenticated the request or not.
*
* request->proxy gets set only AFTER authorization, so
* it's safe to check it here. If it exists, it means
* we're doing a second pass through rad_authenticate().
*/
if (request->proxy) {
int code = 0;
if (request->proxy_reply) code = request->proxy_reply->code;
switch (code) {
/*
* Reply of ACCEPT means accept, thus set Auth-Type
* accordingly.
*/
case PW_CODE_ACCESS_ACCEPT:
tmp = radius_paircreate(request,
&request->config,
PW_AUTH_TYPE, 0);
if (tmp) tmp->vp_integer = PW_AUTHTYPE_ACCEPT;
goto authenticate;
/*
* Challenges are punted back to the NAS without any
* further processing.
*/
case PW_CODE_ACCESS_CHALLENGE:
request->reply->code = PW_CODE_ACCESS_CHALLENGE;
fr_state_put_vps(request, request->packet, request->reply);
return RLM_MODULE_OK;
/*
* ALL other replies mean reject. (this is fail-safe)
*
* Do NOT do any authorization or authentication. They
* are being rejected, so we minimize the amount of work
* done by the server, by rejecting them here.
*/
case PW_CODE_ACCESS_REJECT:
rad_authlog("Login incorrect (Home Server says so)",
request, 0);
request->reply->code = PW_CODE_ACCESS_REJECT;
fr_state_discard(request, request->packet);
return RLM_MODULE_REJECT;
default:
rad_authlog("Login incorrect (Home Server failed to respond)",
request, 0);
fr_state_discard(request, request->packet);
return RLM_MODULE_REJECT;
}
}
#endif
/*
* Look for, and cache, passwords.
*/
if (!request->password) {
request->password = pairfind(request->packet->vps, PW_USER_PASSWORD, 0, TAG_ANY);
}
if (!request->password) {
request->password = pairfind(request->packet->vps, PW_CHAP_PASSWORD, 0, TAG_ANY);
}
/*
* Grab the VPS associated with the State attribute.
*/
fr_state_get_vps(request, request->packet);
/*
* Get the user's authorization information from the database
*/
autz_redo:
result = process_authorize(autz_type, request);
switch (result) {
case RLM_MODULE_NOOP:
case RLM_MODULE_NOTFOUND:
case RLM_MODULE_OK:
case RLM_MODULE_UPDATED:
break;
case RLM_MODULE_HANDLED:
return result;
case RLM_MODULE_FAIL:
case RLM_MODULE_INVALID:
case RLM_MODULE_REJECT:
case RLM_MODULE_USERLOCK:
default:
if ((module_msg = pairfind(request->packet->vps, PW_MODULE_FAILURE_MESSAGE, 0, TAG_ANY)) != NULL) {
char msg[MAX_STRING_LEN + 16];
snprintf(msg, sizeof(msg), "Invalid user (%s)",
module_msg->vp_strvalue);
rad_authlog(msg,request,0);
} else {
rad_authlog("Invalid user", request, 0);
}
request->reply->code = PW_CODE_ACCESS_REJECT;
return result;
}
if (!autz_retry) {
tmp = pairfind(request->config, PW_AUTZ_TYPE, 0, TAG_ANY);
if (tmp) {
autz_type = tmp->vp_integer;
RDEBUG2("Using Autz-Type %s",
dict_valnamebyattr(PW_AUTZ_TYPE, 0, autz_type));
autz_retry = 1;
goto autz_redo;
}
}
/*
* If we haven't already proxied the packet, then check
* to see if we should. Maybe one of the authorize
* modules has decided that a proxy should be used. If
* so, get out of here and send the packet.
*/
if (
#ifdef WITH_PROXY
(request->proxy == NULL) &&
#endif
((tmp = pairfind(request->config, PW_PROXY_TO_REALM, 0, TAG_ANY)) != NULL)) {
REALM *realm;
realm = realm_find2(tmp->vp_strvalue);
/*
* Don't authenticate, as the request is going to
* be proxied.
*/
if (realm && realm->auth_pool) {
return RLM_MODULE_OK;
}
/*
* Catch users who set Proxy-To-Realm to a LOCAL
* realm (sigh). But don't complain if it is
* *the* LOCAL realm.
*/
if (realm &&(strcmp(realm->name, "LOCAL") != 0)) {
RWDEBUG2("You set Proxy-To-Realm = %s, but it is a LOCAL realm! Cancelling proxy request.", realm->name);
}
if (!realm) {
RWDEBUG2("You set Proxy-To-Realm = %s, but the realm does not exist! Cancelling invalid proxy request.", tmp->vp_strvalue);
}
}
#ifdef WITH_PROXY
authenticate:
#endif
/*
* Validate the user
*/
do {
result = rad_check_password(request);
if (result > 0) {
return RLM_MODULE_HANDLED;
}
} while(0);
/*
* Failed to validate the user.
*
* We PRESUME that the code which failed will clean up
* request->reply->vps, to be ONLY the reply items it
* wants to send back.
*/
if (result < 0) {
RDEBUG2("Failed to authenticate the user");
request->reply->code = PW_CODE_ACCESS_REJECT;
if ((module_msg = pairfind(request->packet->vps, PW_MODULE_FAILURE_MESSAGE, 0, TAG_ANY)) != NULL){
char msg[MAX_STRING_LEN+19];
snprintf(msg, sizeof(msg), "Login incorrect (%s)",
module_msg->vp_strvalue);
rad_authlog(msg, request, 0);
} else {
rad_authlog("Login incorrect", request, 0);
}
if (request->password) {
VERIFY_VP(request->password);
/* double check: maybe the secret is wrong? */
if ((debug_flag > 1) && (request->password->da->attr == PW_USER_PASSWORD)) {
uint8_t const *p;
p = (uint8_t const *) request->password->vp_strvalue;
while (*p) {
int size;
size = fr_utf8_char(p);
if (!size) {
RWDEBUG("Unprintable characters in the password. Double-check the "
"shared secret on the server and the NAS!");
break;
}
p += size;
}
}
}
}
#ifdef WITH_SESSION_MGMT
if (result >= 0 &&
(check_item = pairfind(request->config, PW_SIMULTANEOUS_USE, 0, TAG_ANY)) != NULL) {
int r, session_type = 0;
char logstr[1024];
char umsg[MAX_STRING_LEN + 1];
tmp = pairfind(request->config, PW_SESSION_TYPE, 0, TAG_ANY);
if (tmp) {
session_type = tmp->vp_integer;
RDEBUG2("Using Session-Type %s",
dict_valnamebyattr(PW_SESSION_TYPE, 0, session_type));
}
/*
* User authenticated O.K. Now we have to check
* for the Simultaneous-Use parameter.
*/
if (request->username &&
(r = process_checksimul(session_type, request, check_item->vp_integer)) != 0) {
char mpp_ok = 0;
if (r == 2){
/* Multilink attempt. Check if port-limit > simultaneous-use */
VALUE_PAIR *port_limit;
if ((port_limit = pairfind(request->reply->vps, PW_PORT_LIMIT, 0, TAG_ANY)) != NULL &&
port_limit->vp_integer > check_item->vp_integer){
RDEBUG2("MPP is OK");
mpp_ok = 1;
}
}
if (!mpp_ok){
if (check_item->vp_integer > 1) {
snprintf(umsg, sizeof(umsg), "%s (%u)", main_config.denied_msg,
check_item->vp_integer);
} else {
strlcpy(umsg, main_config.denied_msg, sizeof(umsg));
}
request->reply->code = PW_CODE_ACCESS_REJECT;
/*
* They're trying to log in too many times.
* Remove ALL reply attributes.
*/
pairfree(&request->reply->vps);
pairmake_reply("Reply-Message", umsg, T_OP_SET);
snprintf(logstr, sizeof(logstr), "Multiple logins (max %d) %s",
check_item->vp_integer,
r == 2 ? "[MPP attempt]" : "");
rad_authlog(logstr, request, 1);
result = -1;
}
}
}
#endif
/*
* Result should be >= 0 here - if not, it means the user
* is rejected, so we just process post-auth and return.
*/
if (result < 0) {
return RLM_MODULE_REJECT;
}
/*
* Set the reply to Access-Accept, if it hasn't already
* been set to something. (i.e. Access-Challenge)
*/
if (request->reply->code == 0)
request->reply->code = PW_CODE_ACCESS_ACCEPT;
if ((module_msg = pairfind(request->packet->vps, PW_MODULE_SUCCESS_MESSAGE, 0, TAG_ANY)) != NULL){
char msg[MAX_STRING_LEN+12];
snprintf(msg, sizeof(msg), "Login OK (%s)",
module_msg->vp_strvalue);
rad_authlog(msg, request, 1);
} else {
rad_authlog("Login OK", request, 1);
}
return result;
}
/*
* Make sure user/pass are clean
* and then log them
*/
static int rad_authlog(char const *msg, REQUEST *request, int goodpass)
{
int logit;
char const *extra_msg = NULL;
char clean_password[1024];
char clean_username[1024];
char buf[1024];
char extra[1024];
char *p;
VALUE_PAIR *username = NULL;
if (!request->root->log_auth) {
return 0;
}
/*
* Get the correct username based on the configured value
*/
if (!log_stripped_names) {
username = fr_pair_find_by_num(request->packet->vps, PW_USER_NAME, 0, TAG_ANY);
} else {
username = request->username;
}
/*
* Clean up the username
*/
if (username == NULL) {
strcpy(clean_username, "<no User-Name attribute>");
} else {
fr_prints(clean_username, sizeof(clean_username), username->vp_strvalue, username->vp_length, '\0');
}
/*
* Clean up the password
*/
if (request->root->log_auth_badpass || request->root->log_auth_goodpass) {
if (!request->password) {
VALUE_PAIR *auth_type;
auth_type = fr_pair_find_by_num(request->config, PW_AUTH_TYPE, 0, TAG_ANY);
if (auth_type) {
snprintf(clean_password, sizeof(clean_password),
"<via Auth-Type = %s>",
dict_valnamebyattr(PW_AUTH_TYPE, 0,
auth_type->vp_integer));
} else {
strcpy(clean_password, "<no User-Password attribute>");
}
} else if (fr_pair_find_by_num(request->packet->vps, PW_CHAP_PASSWORD, 0, TAG_ANY)) {
strcpy(clean_password, "<CHAP-Password>");
} else {
fr_prints(clean_password, sizeof(clean_password),
request->password->vp_strvalue, request->password->vp_length, '\0');
}
}
if (goodpass) {
logit = request->root->log_auth_goodpass;
extra_msg = request->root->auth_goodpass_msg;
} else {
logit = request->root->log_auth_badpass;
extra_msg = request->root->auth_badpass_msg;
}
if (extra_msg) {
extra[0] = ' ';
p = extra + 1;
if (radius_xlat(p, sizeof(extra) - 1, request, extra_msg, NULL, NULL) < 0) {
return -1;
}
} else {
*extra = '\0';
}
RAUTH("%s: [%s%s%s] (%s)%s",
msg,
clean_username,
logit ? "/" : "",
logit ? clean_password : "",
auth_name(buf, sizeof(buf), request, 1),
extra);
return 0;
}