/*=======================================================================*/
static void dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
{
iop310_dma_t *dma = (iop310_dma_t *) dev_id;
u32 irq_status = 0;
u32 status = 0;
u32 thresh;
irq_status = *(IOP310_FIQ1ISR);
if(!(irq_status & DMA_INT_MASK))
{
return;
}
DPRINTK("IRQ: irq=%d status=%#x\n", irq, irq_status);
status = *(dma->reg_addr.CSR);
thresh = atomic_read(&dma->irq_thresh);
DPRINTK("CSR: %#x\n", status);
DPRINTK("Thresh: %d\n", thresh);
/* while we continue to get DMA INTs */
while((irq_status & DMA_INT_MASK) && thresh--)
{
/* clear CSR */
*(dma->reg_addr.CSR) |= DMA_CSR_DONE_MASK;
dma_process(dma);
status = *(dma->reg_addr.CSR);
irq_status = *(IOP310_FIQ1ISR);
}
/* schedule bottom half */
dma->dma_task.data = (void *)dma;
/* task goes to the immediate task queue */
queue_task(&dma->dma_task, &tq_immediate);
/* mark IMMEDIATE BH for execute */
mark_bh(IMMEDIATE_BH);
}
static void dma_io_write(ioport_t port, Bit8u value)
{
switch (port) {
#define HANDLE_ADDR_WRITE(d_n, c_n) \
case DMA##d_n##_ADDR_##c_n: \
dma[d(d_n)].chans[d(c_n)].base_addr.byte[dma[d(d_n)].ff] = value; \
dma[d(d_n)].chans[d(c_n)].cur_addr.byte[dma[d(d_n)].ff] = value; \
q_printf("DMA%i: addr write: %#x to Channel %d byte %d\n", \
d_n, value, d(c_n), dma[d(d_n)].ff); \
dma[d(d_n)].ff ^= 1; \
break
HANDLE_X(ADDR_WRITE);
#define HANDLE_CNT_WRITE(d_n, c_n) \
case DMA##d_n##_CNT_##c_n: \
dma[d(d_n)].chans[d(c_n)].base_count.byte[dma[d(d_n)].ff] = value; \
dma[d(d_n)].chans[d(c_n)].cur_count.byte[dma[d(d_n)].ff] = value; \
q_printf("DMA%i: count write: %#x to Channel %d byte %d\n", \
d_n, value, d(c_n), dma[d(d_n)].ff); \
dma[d(d_n)].ff ^= 1; \
break
HANDLE_X(CNT_WRITE);
#define HANDLE_PAGE_WRITE(d_n, c_n) \
case DMA##d_n##_PAGE_##c_n: \
dma[d(d_n)].chans[d(c_n)].page = value; \
q_printf("DMA%i: page write: %#x to Channel %d\n", \
d_n, value, d(c_n)); \
break
HANDLE_X(PAGE_WRITE);
case DMA1_MASK_REG:
if (value & 4) {
q_printf("DMA1: mask channel %i\n", value & 3);
dma[DMA1].mask |= 1 << (value & 3);
} else {
q_printf("DMA1: unmask channel %i\n", value & 3);
dma[DMA1].mask &= ~(1 << (value & 3));
dma[DMA1].status &= ~(1 << (value & 3));
}
break;
case DMA2_MASK_REG:
if (value & 4) {
q_printf("DMA2: mask channel %i\n", value & 3);
dma[DMA2].mask |= 1 << (value & 3);
} else {
q_printf("DMA2: unmask channel %i\n", value & 3);
dma[DMA2].mask &= ~(1 << (value & 3));
dma[DMA2].status &= ~(1 << (value & 3));
}
break;
case DMA1_MODE_REG:
dma[DMA1].chans[value & 3].mode = value >> 2;
q_printf("DMA1: Write mode 0x%x to Channel %u\n", value >> 2,
value & 3);
break;
case DMA2_MODE_REG:
dma[DMA2].chans[value & 3].mode = value >> 2;
q_printf("DMA2: Write mode 0x%x to Channel %u\n", value >> 2,
value & 3);
break;
case DMA1_CMD_REG:
dma[DMA1].command = value;
q_printf("DMA1: Write 0x%x to Command reg\n", value);
break;
case DMA2_CMD_REG:
dma[DMA2].command = value;
q_printf("DMA2: Write 0x%x to Command reg\n", value);
break;
case DMA1_CLEAR_FF_REG:
q_printf("DMA1: Clearing Output Flip-Flop\n");
dma[DMA1].ff = 0;
break;
case DMA2_CLEAR_FF_REG:
q_printf("DMA2: Clearing Output Flip-Flop\n");
dma[DMA2].ff = 0;
break;
case DMA1_RESET_REG:
q_printf("DMA1: Reset\n");
dma_soft_reset(DMA1);
break;
case DMA2_RESET_REG:
q_printf("DMA2: Reset\n");
dma_soft_reset(DMA2);
break;
case DMA1_REQ_REG:
if (value & 4) {
q_printf("DMA1: Setting request state %#x\n", value);
dma[DMA1].request |= 1 << (value & 3);
} else {
q_printf("DMA1: Clearing request state %#x\n", value);
dma[DMA1].request &= ~(1 << (value & 3));
}
break;
case DMA2_REQ_REG:
if (value & 4) {
q_printf("DMA2: Setting request state %#x\n", value);
dma[DMA2].request |= 1 << (value & 3);
} else {
q_printf("DMA2: Clearing request state %#x\n", value);
dma[DMA2].request &= ~(1 << (value & 3));
}
break;
case DMA1_CLR_MASK_REG:
q_printf("DMA1: Clearing masks\n");
dma[DMA1].mask = 0;
dma[DMA1].status &= 0xf0;
break;
case DMA2_CLR_MASK_REG:
q_printf("DMA2: Clearing masks\n");
dma[DMA2].mask = 0;
dma[DMA2].status &= 0xf0;
break;
case DMA1_MASK_ALL_REG:
q_printf("DMA1: Setting masks %#x\n", value);
dma[DMA1].mask = value;
dma[DMA1].status &= 0xf0;
break;
case DMA2_MASK_ALL_REG:
q_printf("DMA2: Setting masks %#x\n", value);
dma[DMA2].mask = value;
dma[DMA2].status &= 0xf0;
break;
default:
q_printf("DMA: Unhandled Write on 0x%04x\n", (Bit16u) port);
}
dma_process(); // Not needed in fact
}
static Bit8u dma_io_read(ioport_t port)
{
Bit8u r = 0xff;
switch (port) {
#define HANDLE_CUR_ADDR_READ(d_n, c_n) \
case DMA##d_n##_ADDR_##c_n: \
r = dma[d(d_n)].chans[d(c_n)].cur_addr.byte[dma[d(d_n)].ff]; \
q_printf("DMA%i: cur_addr read: %#x from Channel %d byte %d\n", \
d_n, r, d(c_n), dma[d(d_n)].ff); \
dma[d(d_n)].ff ^= 1; \
break
HANDLE_X(CUR_ADDR_READ);
#define HANDLE_CUR_CNT_READ(d_n, c_n) \
case DMA##d_n##_CNT_##c_n: \
r = dma[d(d_n)].chans[d(c_n)].cur_count.byte[dma[d(d_n)].ff]; \
q_printf("DMA%i: cur_cnt read: %#x from Channel %d byte %d\n", \
d_n, r, d(c_n), dma[d(d_n)].ff); \
dma[d(d_n)].ff ^= 1; \
break
HANDLE_X(CUR_CNT_READ);
#define HANDLE_PAGE_READ(d_n, c_n) \
case DMA##d_n##_PAGE_##c_n: \
r = dma[d(d_n)].chans[d(c_n)].page; \
q_printf("DMA%i: page read: %#x from Channel %d\n", \
d_n, r, d(c_n)); \
break
HANDLE_X(PAGE_READ);
case DMA1_STAT_REG:
r = dma[DMA1].status;
q_printf("DMA1: Read %u from Status reg\n", r);
dma[DMA1].status &= 0xf0; /* clear status bits */
break;
case DMA2_STAT_REG:
r = dma[DMA2].status;
q_printf("DMA2: Read %u from Status reg\n", r);
dma[DMA2].status &= 0xf0; /* clear status bits */
break;
case DMA1_TEMP_REG:
r = dma[DMA1].tmp_reg;
q_printf("DMA1: Read %u from temporary register unimplemented\n",
r);
break;
case DMA2_TEMP_REG:
r = dma[DMA2].tmp_reg;
q_printf("DMA2: Read %u from temporary register unimplemented\n",
r);
break;
default:
q_printf("DMA: Unhandled Read on 0x%04x\n", (Bit16u) port);
}
dma_process(); // Not needed in fact
return r;
}
