static int
ed_pci_attach(device_t dev)
{
struct ed_softc *sc = device_get_softc(dev);
int error = ENXIO;
/*
* Probe RTL8029 cards, but allow failure and try as a generic
* ne-2000. QEMU 0.9 and earlier use the RTL8029 PCI ID, but
* are areally just generic ne-2000 cards.
*/
if (pci_get_devid(dev) == ED_RTL8029_PCI_ID)
error = ed_probe_RTL80x9(dev, PCIR_BAR(0), 0);
if (error)
error = ed_probe_Novell(dev, PCIR_BAR(0),
ED_FLAGS_FORCE_16BIT_MODE);
if (error) {
ed_release_resources(dev);
return (error);
}
ed_Novell_read_mac(sc);
error = ed_alloc_irq(dev, 0, RF_SHAREABLE);
if (error) {
ed_release_resources(dev);
return (error);
}
if (sc->sc_media_ioctl == NULL)
ed_gen_ifmedia_init(sc);
error = ed_attach(dev);
if (error) {
ed_release_resources(dev);
return (error);
}
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE,
NULL, edintr, sc, &sc->irq_handle);
if (error)
ed_release_resources(dev);
return (error);
}
static int
ed_isa_probe_Novell(device_t dev)
{
struct ed_softc *sc = device_get_softc(dev);
int flags = device_get_flags(dev);
int err;
err = ed_probe_Novell(dev, 0, flags);
if (err)
return err;
ed_Novell_read_mac(sc);
/*
* Final sanity check for Gateway Ethernet cards before
* believing that they really are Gateway AT.
* XXX I think this is stale.
*/
if ((ED_FLAGS_GETTYPE(flags) == ED_FLAGS_GWETHER) &&
(sc->enaddr[2] == 0x86)) {
sc->type_str = "Gateway AT";
}
return (0);
}
static int
ed_isa_probe(device_t dev)
{
struct ed_softc *sc = device_get_softc(dev);
int flags = device_get_flags(dev);
int error = 0;
/* Check isapnp ids */
error = ISA_PNP_PROBE(device_get_parent(dev), dev, ed_ids);
/* If the card had a PnP ID that didn't match any we know about */
if (error == ENXIO)
goto end;
/* If we had some other problem. */
if (!(error == 0 || error == ENOENT))
goto end;
/* Heuristic probes */
error = ed_probe_WD80x3(dev, 0, flags);
if (error == 0)
goto end;
ed_release_resources(dev);
error = ed_probe_RTL80x9(dev, 0, flags);
if (error == 0) {
ed_Novell_read_mac(sc);
goto end;
}
ed_release_resources(dev);
#ifdef ED_3C503
error = ed_probe_3Com(dev, 0, flags);
if (error == 0)
goto end;
ed_release_resources(dev);
#endif
#ifdef ED_SIC
error = ed_probe_SIC(dev, 0, flags);
if (error == 0)
goto end;
ed_release_resources(dev);
#endif
error = ed_isa_probe_Novell(dev);
if (error == 0)
goto end;
ed_release_resources(dev);
#ifdef ED_HPP
error = ed_probe_HP_pclanp(dev, 0, flags);
if (error == 0)
goto end;
ed_release_resources(dev);
#endif
end:
if (error == 0)
error = ed_alloc_irq(dev, 0, 0);
ed_release_resources(dev);
return (error);
}
static int
ed_cbus_probe(device_t dev)
{
struct ed_softc *sc = device_get_softc(dev);
int flags = device_get_flags(dev);
int error = 0;
sc->type = ED_TYPE98(flags);
#ifdef ED_DEBUG
device_printf(dev, "ed_cbus_probe: sc->type=%x\n", sc->type);
#endif
/* Check isapnp ids */
error = ISA_PNP_PROBE(device_get_parent(dev), dev, ed_ids);
#ifdef ED_DEBUG
device_printf(dev, "ed_cbus_probe: ISA_PNP_PROBE returns %d\n", error);
#endif
/* If the card had a PnP ID that didn't match any we know about */
if (error == ENXIO)
goto end;
/* If we had some other problem. */
if (!(error == 0 || error == ENOENT))
goto end;
/* Heuristic probes */
#ifdef ED_DEBUG
device_printf(dev, "ed_cbus_probe: Heuristic probes start\n");
#endif
switch (sc->type) {
case ED_TYPE98_GENERIC:
/*
* CAUTION!
* sc->type of these boards are overwritten by PC/AT's value.
*/
/*
* SMC EtherEZ98
*/
error = ed_probe_EZ98(dev, 0, flags);
if (error == 0)
goto end;
ed_release_resources(dev);
/*
* Allied Telesis CenterCom LA-98-T
*/
error = ed_probe_Novell(dev, 0, flags);
if (error == 0) {
ed_Novell_read_mac(sc);
goto end;
}
break;
/*
* NE2000-like boards probe routine
*/
case ED_TYPE98_BDN:
/*
* ELECOM LANEED LD-BDN
* PLANET SMART COM 98 EN-2298
*/
case ED_TYPE98_LGY:
/*
* MELCO LGY-98, IND-SP, IND-SS
* MACNICA NE2098
*/
case ED_TYPE98_ICM:
/*
* ICM DT-ET-25, DT-ET-T5, IF-2766ET, IF-2771ET
* D-Link DE-298P, DE-298
*/
case ED_TYPE98_EGY:
/*
* MELCO EGY-98
* Contec C-NET(98)E-A, C-NET(98)L-A
*/
case ED_TYPE98_108:
/*
* NEC PC-9801-107,108
*/
case ED_TYPE98_NC5098:
/*
* NextCom NC5098
*/
error = ed98_probe_Novell(dev, 0, flags);
break;
/*
* other boards with special probe routine
*/
case ED_TYPE98_SIC:
/*
* Allied Telesis SIC-98
*/
error = ed_probe_SIC98(dev, 0, flags);
break;
case ED_TYPE98_CNET98EL:
/*
* Contec C-NET(98)E/L
*/
error = ed_probe_CNET98EL(dev, 0, flags);
break;
case ED_TYPE98_CNET98:
/*
* Contec C-NET(98)
*/
error = ed_probe_CNET98(dev, 0, flags);
break;
case ED_TYPE98_LA98:
/*
* IO-DATA LA/T-98
* NEC PC-9801-77,78
*/
error = ed_probe_NEC77(dev, 0, flags);
break;
case ED_TYPE98_NW98X:
/*
* Networld EC/EP-98X
*/
error = ed_probe_NW98X(dev, 0, flags);
break;
case ED_TYPE98_SB98:
/*
* Soliton SB-9801
* Fujikura FN-9801
*/
error = ed_probe_SB98(dev, 0, flags);
break;
}
end:
#ifdef ED_DEBUG
device_printf(dev, "ed_cbus_probe: end, error=%d\n", error);
#endif
if (error == 0)
error = ed_alloc_irq(dev, 0, 0);
ed_release_resources(dev);
return (error);
}