void setup_arch(char **cmdline_p)
{
int bootmap_size;
extern int _stext, _etext;
extern int _edata, _end;
#ifdef DEBUG
extern int _sdata, _sbss, _ebss;
#ifdef CONFIG_BLK_DEV_BLKMEM
extern int *romarray;
#endif
#endif
unsigned char *psrc=(unsigned char *)((NIOS_FLASH_START + NIOS_FLASH_END)>>1);
int i=0;
memory_start = (unsigned long)&_end;
memory_end = (int) nasys_program_mem_end;
/* copy the command line from booting paramter region */
flash_command((int)psrc, 0x555, 0x88);
while ((*psrc!=0xFF) && (i<sizeof(command_line))) {
command_line[i++]=*psrc++;
}
command_line[i]=0;
exit_se_flash(((NIOS_FLASH_START + NIOS_FLASH_END)>>1) );
if (command_line[0]==0)
memcpy(command_line, default_command_line, sizeof(default_command_line));
printk("\x0F\r\n\nuClinux/NIOS\n");
printk("Altera NIOS Excalibur support (C) 2001 Microtronix Datacom Ltd.\n");
#ifdef DEBUG
printk("KERNEL -> TEXT=0x%08x-0x%08x DATA=0x%08x-0x%08x "
"BSS=0x%08x-0x%08x\n", (int) &_stext, (int) &_etext,
(int) &_sdata, (int) &_edata,
(int) &_sbss, (int) &_ebss);
printk("KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
"STACK=0x%06x-0x%06x\n",
#ifdef CONFIG_BLK_DEV_BLKMEM
(int) romarray, ((int) romarray) + ntohl(romarray[2]),
#else
(int) &_ebss, (int) memory_start,
#endif
(int) memory_start, (int) memory_end,
(int) memory_end, (int) nasys_program_mem_end);
#endif
init_mm.start_code = (unsigned long) &_stext;
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) 0;
//vic FIXME - this necessary ?
init_task.thread.kregs = &fake_regs;
#if 0
ROOT_DEV = MKDEV(BLKMEM_MAJOR,0);
#endif
/* Keep a copy of command line */
*cmdline_p = &command_line[0];
memcpy(saved_command_line, command_line, sizeof(saved_command_line));
saved_command_line[sizeof(saved_command_line)-1] = 0;
#ifdef DEBUG
if (strlen(*cmdline_p))
printk("Command line: '%s'\n", *cmdline_p);
else
printk("No Command line passed\n");
#endif
#if defined (CONFIG_CS89x0) || (CONFIG_SMC91111)
/* now read the hwaddr of the ethernet --wentao*/
flash_command(NIOS_FLASH_START, 0x555, 0x88);
memcpy(cs8900a_hwaddr_array,(void*)NIOS_FLASH_START,6);
exit_se_flash(NIOS_FLASH_START);
/* now do the checking, make sure we got a valid addr */
if (cs8900a_hwaddr_array[0] & (unsigned char)1)
{
printk("Invalid ethernet hardware addr, fixed\n");
cs8900a_hwaddr_array[0] ^= (unsigned char)1;
}
cs8900a_hwaddr=cs8900a_hwaddr_array;
#ifdef DEBUG
printk("Setup the hardware addr for ethernet\n\t %02x %02x %02x %02x %02x %02x\n",
cs8900a_hwaddr[0],cs8900a_hwaddr[1],
cs8900a_hwaddr[2],cs8900a_hwaddr[3],
cs8900a_hwaddr[4],cs8900a_hwaddr[5]);
#endif
#endif
/*
* give all the memory to the bootmap allocator, tell it to put the
* boot mem_map at the start of memory
*/
bootmap_size = init_bootmem_node(
NODE_DATA(0),
memory_start >> PAGE_SHIFT, /* map goes here */
PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
memory_end >> PAGE_SHIFT);
/*
* free the usable memory, we have to make sure we do not free
* the bootmem bitmap so we then reserve it after freeing it :-)
*/
free_bootmem(memory_start, memory_end - memory_start);
reserve_bootmem(memory_start, bootmap_size);
/*
* get kmalloc into gear
*/
paging_init();
#ifdef CONFIG_VT
#if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
#endif
#ifdef DEBUG
printk("Done setup_arch\n");
#endif
}
void __init setup_arch(char **cmdline_p)
{
int bootmap_size;
extern int _stext, _etext;
extern int _edata, _end;
#ifdef DEBUG
extern int _sdata, _sbss, _ebss;
#ifdef CONFIG_BLK_DEV_BLKMEM
extern int *romarray;
#endif
#endif
#if 0 // krh
unsigned char *psrc=(unsigned char *)((NIOS_FLASH_START + NIOS_FLASH_END)>>1);
int i=0;
#endif // krh
memory_start = PAGE_ALIGN((unsigned long)&_end);
memory_end = (unsigned long) nasys_program_mem_end;
#if 0 //;kenw;
/* copy the command line from booting paramter region */
#if defined (nasys_am29lv065d_flash_0) //;dgt;
{ //;dgt;
// ...TBA... //;dgt;
} //;dgt;
#else //;dgt;
flash_command((int)psrc, 0x555, 0x88);
while ((*psrc!=0xFF) && (i<sizeof(command_line))) {
command_line[i++]=*psrc++;
}
command_line[i]=0;
exit_se_flash(((NIOS_FLASH_START + NIOS_FLASH_END)>>1) );
if (command_line[0]==0)
#endif //;dgt;
#endif //;kenw;
#ifndef CONFIG_PASS_CMDLINE
memcpy(command_line, default_command_line, sizeof(default_command_line));
#endif
printk("\x0F\r\n\nuClinux/Nios II\n");
printk("Altera Nios II support (C) 2004 Microtronix Datacom Ltd.\n");
#ifdef DEBUG
printk("KERNEL -> TEXT=0x%08x-0x%08x DATA=0x%08x-0x%08x "
"BSS=0x%08x-0x%08x\n", (int) &_stext, (int) &_etext,
(int) &_sdata, (int) &_edata,
(int) &_sbss, (int) &_ebss);
printk("KERNEL -> MEM=0x%06x-0x%06x STACK=0x%06x-0x%06x\n",
(int) memory_start, (int) memory_end,
(int) memory_end, (int) nasys_program_mem_end);
#endif
init_mm.start_code = (unsigned long) &_stext;
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) 0;
init_task.thread.kregs = &fake_regs;
#if 0
ROOT_DEV = MKDEV(BLKMEM_MAJOR,0);
#endif
/* Keep a copy of command line */
*cmdline_p = &command_line[0];
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE-1] = 0;
#ifdef DEBUG
if (strlen(*cmdline_p))
printk("Command line: '%s'\n", *cmdline_p);
else
printk("No Command line passed\n");
#endif
#if defined (CONFIG_CS89x0) || defined (CONFIG_SMC91111) || defined (CONFIG_OPEN_ETH) || defined (CONFIG_MTIP1000_ETH) || defined (CONFIG_DM9000_ETH) || defined (CONFIG_SMC91X) || defined (CONFIG_DM9000) || defined (CONFIG_DM9KS)
#if defined (CONFIG_MTIP1000_ETH) //;dgt3;
(*((np_mtip_mac *) //;dgt3;
(na_mtip_mac_control_port))). //;dgt3;
COMMAND_CONFIG = 0; //;dgt3;
#endif //;dgt3;
/* now read the hwaddr of the ethernet --wentao*/
#if defined (na_flash_kernel)
#if 1 //;dgt2;
// #if defined (nasys_am29lv065d_flash_0) //;dgt;
{ //;dgt;
unsigned char *flashptr = //;dgt;
((unsigned char *) //;dgt;
(( //;dgt;
#if defined (na_flash_kernel_end) //;dgt2;
na_flash_kernel_end //;dgt2;
#else //;dgt2;
#if defined (na_flash_kernel_base) //;dgt2;
na_flash_kernel_base + //;dgt;
#else //;dgt2;
na_flash_kernel + //;dgt2;
#endif //;dgt2;
na_flash_kernel_size //;dgt2;
#endif //;dgt2;
- 0x00010000))); //;dgt;
// last 64K of Altera stratix/cyclone flash //;dgt;
//;dgt;
if((*((unsigned long *) flashptr)) == 0x00005AFE) //;dgt;
{ //;dgt;
memcpy(excalibur_enet_hwaddr_array, //;dgt;
((void*) (flashptr+4)),6); //;dgt;
} //;dgt;
else //;dgt;
{ //;dgt;
printk("\nsetup_arch: No persistant network" //;dgt;
" settings signature at %08lX\n", //;dgt;
((unsigned long) flashptr)); //;dgt;
*((unsigned long *) //;dgt;
(&(excalibur_enet_hwaddr_array[0]))) = //;dgt;
0x00ED0700; //;dgt2;
/* 0x00-07-ED: Altera Corporation. //;dgt; */
*((unsigned short *) //;dgt;
(&(excalibur_enet_hwaddr_array[4]))) = //;dgt;
0x0000; //;dgt;
/* Should be: 0x-00-07-ED-0A-03-(Random# 0-256) //;dgt2; */
/* 0x-00-07-ED-0A-xx-yy Vermont boards //;dgt2; */
/* 0x-00-07-ED-0B-xx-yy Rhode Island boards //;dgt2; */
/* 0x-00-07-ED-0C-xx-yy Delaware boards //;dgt2; */
/* 00 Internal Altera //;dgt2; */
/* 01 Beta, pre-production//;dgt2; */
/* 02 Beta, pre-production//;dgt2; */
/* 03 Customer use //;dgt2; */
} //;dgt;
} //;dgt;
#else //;dgt;
flash_command(NIOS_FLASH_START, 0x555, 0x88);
memcpy(excalibur_enet_hwaddr_array,(void*)NIOS_FLASH_START,6);
exit_se_flash(NIOS_FLASH_START);;
#endif //;dgt;
/* now do the checking, make sure we got a valid addr */
if (excalibur_enet_hwaddr_array[0] & (unsigned char)1)
{
printk("Ethernet hardware address:Clearing invalid bit #0\n");
excalibur_enet_hwaddr_array[0] ^= (unsigned char)1;
}
#else
excalibur_enet_hwaddr[0] = 0x00;
excalibur_enet_hwaddr[1] = 0x07;
excalibur_enet_hwaddr[2] = 0xed;
excalibur_enet_hwaddr[3] = 0x0a;
excalibur_enet_hwaddr[4] = 0x03;
excalibur_enet_hwaddr[5] = 0x00;
#endif /* defined na_flash_kernel */
excalibur_enet_hwaddr=excalibur_enet_hwaddr_array;
#ifdef DEBUG
printk("Setup the hardware addr for ethernet\n\t %02x %02x %02x %02x %02x %02x\n",
excalibur_enet_hwaddr[0],excalibur_enet_hwaddr[1],
excalibur_enet_hwaddr[2],excalibur_enet_hwaddr[3],
excalibur_enet_hwaddr[4],excalibur_enet_hwaddr[5]);
#endif
#endif
/*
* give all the memory to the bootmap allocator, tell it to put the
* boot mem_map at the start of memory
*/
bootmap_size = init_bootmem_node(
NODE_DATA(0),
memory_start >> PAGE_SHIFT, /* map goes here */
PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
memory_end >> PAGE_SHIFT);
/*
* free the usable memory, we have to make sure we do not free
* the bootmem bitmap so we then reserve it after freeing it :-)
*/
free_bootmem(memory_start, memory_end - memory_start);
reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
reserve_bootmem(virt_to_phys((void *)initrd_start),
initrd_end - initrd_start, BOOTMEM_DEFAULT);
#endif /* CONFIG_BLK_DEV_INITRD */
/*
* get kmalloc into gear
*/
paging_init();
#ifdef CONFIG_VT
#if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
#endif
#ifdef DEBUG
printk("Done setup_arch\n");
#endif
}