void JsonReader::feed(std::string const & str) {
for (std::string::const_iterator i(str.begin()); i != str.end(); ++i) {
feed(* i);
}
}
void Neuron::feed_forward(const values_t& input)
{
feed(input);
activate();
}
void JsonReader::feed(char const * const buffer, std::size_t const length) {
for (std::size_t i(static_cast <std::size_t>(0u)); i < length; ++i) {
char const ch(buffer[i]);
feed(ch);
}
}
void Initialize(void)
{
// Setting the Phased Lock Loop (PLL)
// ----------------------------------
//
// Olimex LPC-P2148 has a 12.0000 mhz crystal
//
// We'd like the LPC2148 to run at 60 mhz (has to be an even multiple of crystal)
//
// According to the Philips LPC2148 manual: M = cclk / Fosc where: M = PLL multiplier (bits 0-4 of PLLCFG)
// cclk = 60000000 hz
// Fosc = 12000000 hz
//
// Solving: M = 60000000 / 12000000 = 5
//
// Note: M - 1 must be entered into bits 0-4 of PLLCFG (assign 4 to these bits)
//
//
// The Current Controlled Oscilator (CCO) must operate in the range 156 mhz to 320 mhz
//
// According to the Philips LPC2148 manual: Fcco = cclk * 2 * P where: Fcco = CCO frequency
// cclk = 60000000 hz
// P = PLL divisor (bits 5-6 of PLLCFG)
//
// Solving: Fcco = 60000000 * 2 * P
// P = 2 (trial value)
// Fcco = 60000000 * 2 * 2
// Fcc0 = 240000000 hz (good choice for P since it's within the 156 mhz to 320 mhz range)
//
// From Table 22 (page 34) of Philips LPC2148 manual P = 2, PLLCFG bits 5-6 = 1 (assign 1 to these bits)
//
// Finally: PLLCFG = 0 01 00100 = 0x24
//
// Final note: to load PLLCFG register, we must use the 0xAA followed 0x55 write sequence to the PLLFEED register
// this is done in the short function feed() below
//
// Setting Multiplier and Divider values
PLLCFG = 0x24;
feed();
// Enabling the PLL */
PLLCON = 0x1;
feed();
// Wait for the PLL to lock to set frequency
while(!(PLLSTAT & PLOCK)) ;
// Connect the PLL as the clock source
PLLCON = 0x3;
feed();
// Enabling MAM and setting number of clocks used for Flash memory fetch (4 cclks in this case)
MAMTIM = 0x3;
MAMCR = 0x2;
// Setting peripheral Clock (pclk) to System Clock (cclk)
VPBDIV = 0x1;
}
void Neuron::feed_forward(const layer_t& layer)
{
feed(layer);
activate();
}
void VTermMM::feed(char c, VTermModifier mod)
{
char key[] = { c, NULL };
feed(key, mod);
}
/*!
* Получение фида \b user.
*
* Если фид не существует, то он будет создан, при создании будет задана маска прав доступа 0400.
*/
FeedPtr Hosts::user() const
{
return feed(FEED_NAME_USER, 0444);
}
parser::parser(string line)
{
feed(line);
}
int Mpg123Decoder::decode()
{
int size = 0;
bool done = false;
while (size < bufferSize && !done && !eof)
{
size_t numbytes = 0;
int r = mpg123_read(handle, (unsigned char *) buffer + size, bufferSize - size, &numbytes);
switch (r)
{
case MPG123_NEW_FORMAT:
{
size += numbytes;
long rate = 0;
int encoding = 0;
int ret = mpg123_getformat(handle, &rate, &channels, &encoding);
if (rate == 0)
rate = sampleRate;
else
sampleRate = rate;
if (channels == 0)
channels = MPG123_STEREO;
if (encoding == 0)
encoding = MPG123_ENC_SIGNED_16;
ret = mpg123_format(handle, rate, channels, encoding);
if (ret != MPG123_OK)
throw love::Exception("Could not set output format.");
}
continue;
case MPG123_NEED_MORE:
{
size += numbytes;
int v = feed(8192);
switch (v)
{
case MPG123_OK:
continue;
case MPG123_DONE:
if (numbytes == 0)
eof = true;
break;
default:
done = true;
}
continue;
}
case MPG123_OK:
size += numbytes;
continue;
case MPG123_DONE:
// Apparently, mpg123_read does not return MPG123_DONE, but
// let's keep it here anyway.
eof = true;
default:
done = true;
break;
}
}
return size;
}
int main( int argc, char** argv ) {
CommandlineOptionHandler coh( argc, argv );
typedef pair< MC2String, MC2String > OptionPair;
uint32 format = MAX_UINT32;
const OptionPair options[] = {
make_pair( "--datexii_as", "Vägverket DatexII Accident Service" ),
make_pair( "--datexii_eis", "Vägverket DatexII Emergency Info Service" ),
make_pair( "--datexii_rws", "Vägverket DatexII Road Work Service" ),
make_pair( "--datexii_tmx", "Vägverket DatexII Traffic Message Service" ),
};
coh.addSingleChoiceOption( "-f",
options,
options + sizeof (options) / sizeof (*options),
&format, MAX_UINT32,
"Sets the type of data to read." );
coh.setTailHelp("[files]");
if ( ! coh.parse() ) {
mc2log << error << "Failed to parse command line!" << endl;
return 1;
}
if ( ! Properties::setPropertyFileName( coh.getPropertyFileName() ) ) {
mc2log << error << "TrafficServer: No such file or directory: '"
<< coh.getPropertyFileName() << "'" << endl;
return 2;
}
// Initialize the XML system
XMLTool::XMLInit xmlInit;
vector<MC2String> files;
for ( uint32 i = 0; i < coh.getTailLength(); ++i ) {
files.push_back( coh.getTail( i ) );
}
FileTrafficFeed feed( files );
// we need files!
if ( feed.eos() ) {
mc2log << error << "No feed!" << endl;
return 3;
}
auto_ptr<TrafficParser> parser( createParser( format ) );
if ( ! parser.get() ) {
mc2log << error << "Failed to create parser" << endl;
return 4;
}
while ( ! feed.eos() ) {
// get data and parse situations
TrafficFeed::Data data;
if ( ! feed.getData( data ) ) {
mc2log << error << "Failed to get feed." << endl;
break;
}
TrafficParser::Situations situations;
if ( ! parser->parse( data, situations ) ) {
mc2log << error << "Failed to parse feed." << endl;
return 5;
}
if ( situations.empty() ) {
mc2log << error << "No situations parsed from feed." << endl;
return 6;
}
mc2log << "Situations parsed: " << situations.size() << endl;
STLUtility::deleteValues( situations );
}
return 0;
}
/**********************************************************
Initialize
**********************************************************/
#define PLOCK 0x400
static void feed(void)
{
PLLFEED = 0xAA;
PLLFEED = 0x55;
}
#ifdef LPC214x
void Initialize(void)
{
// Setting the Phased Lock Loop (PLL)
// ----------------------------------
//
// Olimex LPC-P2148 has a 12.0000 mhz crystal
//
// We'd like the LPC2148 to run at 60 mhz (has to be an even multiple of crystal)
//
// According to the Philips LPC2148 manual: M = cclk / Fosc where: M = PLL multiplier (bits 0-4 of PLLCFG)
// cclk = 60000000 hz
// Fosc = 12000000 hz
//
// Solving: M = 60000000 / 12000000 = 5
//
// Note: M - 1 must be entered into bits 0-4 of PLLCFG (assign 4 to these bits)
//
//
// The Current Controlled Oscilator (CCO) must operate in the range 156 mhz to 320 mhz
//
// According to the Philips LPC2148 manual: Fcco = cclk * 2 * P where: Fcco = CCO frequency
// cclk = 60000000 hz
// P = PLL divisor (bits 5-6 of PLLCFG)
//
// Solving: Fcco = 60000000 * 2 * P
// P = 2 (trial value)
// Fcco = 60000000 * 2 * 2
// Fcc0 = 240000000 hz (good choice for P since it's within the 156 mhz to 320 mhz range)
//
// From Table 22 (page 34) of Philips LPC2148 manual P = 2, PLLCFG bits 5-6 = 1 (assign 1 to these bits)
//
// Finally: PLLCFG = 0 01 00100 = 0x24
//
// Final note: to load PLLCFG register, we must use the 0xAA followed 0x55 write sequence to the PLLFEED register
// this is done in the short function feed() below
//
// Setting Multiplier and Divider values
PLLCFG = 0x24;
feed();
// Enabling the PLL */
PLLCON = 0x1;
feed();
// Wait for the PLL to lock to set frequency
while(!(PLLSTAT & PLOCK)) ;
// Connect the PLL as the clock source
PLLCON = 0x3;
feed();
// Enabling MAM and setting number of clocks used for Flash memory fetch
MAMTIM = 0x3;
MAMCR = 0x2;
// Setting peripheral Clock (pclk) to System Clock (cclk)
VPBDIV = 0x1;
}
#else
#define PLL_N 2UL
#define PLL_M 72UL
#define CCLK_DIV 4
#define USBCLKDivValue 5UL /* Fosc is divides by USBCLKDivValue+1 to make48MHz */
void Initialize(void)
{
#if 0
MEMMAP = 0x1; /* remap to internal flash */
PCONP |= 0x80000000; /* Turn On USB PCLK */
#endif
// Setting the Phased Lock Loop (PLL)
// ----------------------------------
//
// CQ-FRK-NXP LPC2388 has a 12.0000 mhz crystal
//
// We'd like the LPC2388 to run at 72 mhz (has to be an even multiple of crystal)
//
// According to the Philips LPC2148 manual: M = cclk / Fosc where: M = PLL multiplier (bits 0-4 of PLLCFG)
// cclk = 60000000 hz
// Fosc = 12000000 hz
//
// Solving: M = 60000000 / 12000000 = 5
//
// Note: M - 1 must be entered into bits 0-4 of PLLCFG (assign 4 to these bits)
//
//
// The Current Controlled Oscilator (CCO) must operate in the range 156 mhz to 320 mhz
//
// According to the Philips LPC2148 manual: Fcco = cclk * 2 * P where: Fcco = CCO frequency
// cclk = 60000000 hz
// P = PLL divisor (bits 5-6 of PLLCFG)
//
// Solving: Fcco = 60000000 * 2 * P
// P = 2 (trial value)
// Fcco = 60000000 * 2 * 2
// Fcc0 = 240000000 hz (good choice for P since it's within the 156 mhz to 320 mhz range)
//
// From Table 22 (page 34) of Philips LPC2148 manual P = 2, PLLCFG bits 5-6 = 1 (assign 1 to these bits)
//
// Finally: PLLCFG = 0 01 00100 = 0x24
//
// Final note: to load PLLCFG register, we must use the 0xAA followed 0x55 write sequence to the PLLFEED register
// this is done in the short function feed() below
//
if ( PLLSTAT & (1 << 25) ) {
PLLCON = 1; /* Disconnect PLL output if PLL is in use */
PLLFEED = 0xAA;
PLLFEED = 0x55;
}
// Setting Multiplier and Divider values
PLLCFG = ((PLL_N - 1) << 16) | (PLL_M - 1); /* Re-configure PLL */
feed();
// Enabling the PLL */
PLLCON = 0x1;
feed();
// Wait for the PLL to lock to set frequency
while ((PLLSTAT & (1 << 26)) == 0); /* Wait for PLL locked */
// while(!(PLLSTAT & PLOCK)) ;
CCLKCFG = CCLK_DIV-1; /* Select CCLK frequency (divide ratio of hclk) */
USBCLKCFG = USBCLKDivValue; /* usbclk = 48 MHz */
// Connect the PLL as the clock source
PLLCON = 0x3;
feed();
MAMCR = 0; /* Configure MAM for 72MHz operation */
// Enabling MAM and setting number of clocks used for Flash memory fetch
MAMTIM = 0x3;
MAMCR = 0x2;
PCLKSEL0 = 0x00000000; /* Select peripheral clock */
PCLKSEL1 = 0x00000000;
ClearVector();
SCS |= 1; /* Enable FIO0 and FIO1 */
FIO1PIN2 = 0x04; /* -|-|-|-|-|LED|-|- */
FIO1DIR2 = 0x04;
PINMODE3 = 0x00000020;
#if 0
/* Initialize Timer0 as 1kHz interval timer */
RegisterVector(TIMER0_INT, Isr_TIMER0, PRI_LOWEST, CLASS_IRQ);
T0CTCR = 0;
T0MR0 = 18000 - 1; /* 18M / 1k = 18000 */
T0MCR = 0x3; /* Clear TC and Interrupt on MR0 match */
T0TCR = 1;
IrqEnable();
#endif
// uart0_init(INIT_BAUDRATE);
// Setting peripheral Clock (pclk) to System Clock (cclk)
}
feed parser::parse_url(const std::string& url, time_t lastmodified, const std::string& etag, newsbeuter::remote_api * api, const std::string& cookie_cache) {
std::string buf;
CURLcode ret;
CURL * easyhandle = curl_easy_init();
if (!easyhandle) {
throw exception(_("couldn't initialize libcurl"));
}
if (ua) {
curl_easy_setopt(easyhandle, CURLOPT_USERAGENT, ua);
}
if (api) {
api->configure_handle(easyhandle);
}
curl_easy_setopt(easyhandle, CURLOPT_URL, url.c_str());
curl_easy_setopt(easyhandle, CURLOPT_SSL_VERIFYPEER, 0);
curl_easy_setopt(easyhandle, CURLOPT_WRITEFUNCTION, my_write_data);
curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &buf);
curl_easy_setopt(easyhandle, CURLOPT_NOSIGNAL, 1);
curl_easy_setopt(easyhandle, CURLOPT_FOLLOWLOCATION, 1);
curl_easy_setopt(easyhandle, CURLOPT_MAXREDIRS, 10);
curl_easy_setopt(easyhandle, CURLOPT_FAILONERROR, 1);
curl_easy_setopt(easyhandle, CURLOPT_ENCODING, "gzip, deflate");
if (cookie_cache != "") {
curl_easy_setopt(easyhandle, CURLOPT_COOKIEFILE, cookie_cache.c_str());
curl_easy_setopt(easyhandle, CURLOPT_COOKIEJAR, cookie_cache.c_str());
}
if (to != 0)
curl_easy_setopt(easyhandle, CURLOPT_TIMEOUT, to);
if (prx)
curl_easy_setopt(easyhandle, CURLOPT_PROXY, prx);
if (prxauth) {
curl_easy_setopt(easyhandle, CURLOPT_PROXYAUTH, CURLAUTH_ANY);
curl_easy_setopt(easyhandle, CURLOPT_PROXYUSERPWD, prxauth);
}
curl_easy_setopt(easyhandle, CURLOPT_PROXYTYPE, prxtype);
header_values hdrs = { 0, "" };
curl_slist * custom_headers = NULL;
if (lastmodified != 0) {
curl_easy_setopt(easyhandle, CURLOPT_TIMECONDITION, CURL_TIMECOND_IFMODSINCE);
curl_easy_setopt(easyhandle, CURLOPT_TIMEVALUE, lastmodified);
curl_easy_setopt(easyhandle, CURLOPT_HEADERDATA, &hdrs);
curl_easy_setopt(easyhandle, CURLOPT_HEADERFUNCTION, handle_headers);
}
if (etag.length() > 0) {
custom_headers = curl_slist_append(custom_headers, utils::strprintf("If-None-Match: %s", etag.c_str()).c_str());
curl_easy_setopt(easyhandle, CURLOPT_HTTPHEADER, custom_headers);
curl_easy_setopt(easyhandle, CURLOPT_HEADERDATA, &hdrs);
curl_easy_setopt(easyhandle, CURLOPT_HEADERFUNCTION, handle_headers);
}
ret = curl_easy_perform(easyhandle);
lm = hdrs.lastmodified;
et = hdrs.etag;
if (custom_headers) {
curl_slist_free_all(custom_headers);
}
LOG(LOG_DEBUG, "rsspp::parser::parse_url: ret = %d", ret);
long status;
curl_easy_getinfo(easyhandle, CURLINFO_HTTP_CONNECTCODE, &status);
if (status >= 400) {
LOG(LOG_USERERROR, _("Error: trying to download feed `%s' returned HTTP status code %ld."), url.c_str(), status);
}
curl_easy_cleanup(easyhandle);
if (ret != 0) {
LOG(LOG_ERROR, "rsspp::parser::parse_url: curl_easy_perform returned err %d: %s", ret, curl_easy_strerror(ret));
throw exception(curl_easy_strerror(ret));
}
LOG(LOG_INFO, "parser::parse_url: retrieved data for %s: %s", url.c_str(), buf.c_str());
if (buf.length() > 0) {
LOG(LOG_DEBUG, "parser::parse_url: handing over data to parse_buffer()");
return parse_buffer(buf.c_str(), buf.length(), url.c_str());
}
return feed();
}
int OSM_Model400::calculate( )
{
// Return value, assume successful
int retVal = 0;
// Vectors for internal component streams
OSM_Vector x( nSize() ); // net crusher contents
OSM_Vector y( nSize() ); // material classified for breakage
OSM_Vector z( nSize() ); // breakage products of y
// Calculate classification function: C[]
calculateC( );
// Create contents matrix if required
if( contents.rows()!=nComp() || contents.columns()!=nSize() )
{
contents.dimension( nComp(), nSize() );
}
//-- Main Loop - loop over components in the feed -----------------------
for( int comp=0; comp<nComp(); comp++ )
{
// Aliases to component vectors
OSM_Vector& feedC = feed()[comp];
OSM_Vector& prodC = product()[comp];
OSM_Vector& x = contents[comp];
if( feedC.sum() > 0 ) // Component present ?
{
calculateA( comp ); // Make appearance function
double misconvergence = 1e20; // Force misconvergence
long iteration = 0; // No iterations yet
//-- Iteration Loop - until converged or maximum iterations -----
while( misconvergence>tolerance && iteration<maxIteration )
{
// classify material for breakage y = C(x)
y.loadProduct( C, x );
// obtain breakage products z = A(y)
makeDaughters( y, z );
// obtain next iteration of recycle: x = feed + z
misconvergence = x.loadSumWithCompare( feedC, z );
// a successful iteration (hopefully)
iteration++;
}
// product component by balance
prodC.loadSubtraction( x, y );
}
else
{
// product component is 0
prodC = 0;
}
}
// indicate success
return retVal;
}
bool Terrain2FactorySaver::WriteDown (iBase *obj, iDocumentNode *parent,
iStreamSource *ssource)
{
if (!parent) return false; //you never know...
if (obj)
{
csRef<iDocumentNode> paramsNode =
parent->CreateNodeBefore(CS_NODE_ELEMENT, 0);
paramsNode->SetValue("params");
csRef<iTerrainFactory> tfact =
scfQueryInterface<iTerrainFactory> (obj);
if (!tfact) return false;
{
iTerrainRenderer* render (tfact->GetRenderer());
csRef<iFactory> renderFact (scfQueryInterfaceSafe<iFactory> (render));
if (renderFact.IsValid())
{
csRef<iDocumentNode> node =
paramsNode->CreateNodeBefore (CS_NODE_ELEMENT, 0);
node->SetValue ("renderer");
node->CreateNodeBefore (CS_NODE_TEXT, 0)
->SetValue (renderFact->QueryClassID());
}
}
{
iTerrainCollider* collide (tfact->GetCollider());
csRef<iFactory> collideFact (scfQueryInterfaceSafe<iFactory> (collide));
if (collideFact.IsValid())
{
csRef<iDocumentNode> node =
paramsNode->CreateNodeBefore (CS_NODE_ELEMENT, 0);
node->SetValue ("collider");
node->CreateNodeBefore (CS_NODE_TEXT, 0)
->SetValue (collideFact->QueryClassID());
}
}
{
iTerrainDataFeeder* feed (tfact->GetFeeder());
csRef<iFactory> feedFact (scfQueryInterfaceSafe<iFactory> (feed));
if (feedFact.IsValid())
{
csRef<iDocumentNode> node =
paramsNode->CreateNodeBefore (CS_NODE_ELEMENT, 0);
node->SetValue ("feeder");
node->CreateNodeBefore (CS_NODE_TEXT, 0)
->SetValue (feedFact->QueryClassID());
}
}
{
csRef<iDocumentNode> node =
paramsNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("maxloadedcells");
node->CreateNodeBefore (CS_NODE_TEXT, 0)
->SetValueAsInt ((int)tfact->GetMaxLoadedCells());
}
iTerrainFactoryCell* defaultCell = tfact->GetDefaultCell();
csRef<iDocumentNode> cellsNode =
paramsNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
cellsNode->SetValue ("cells");
{
csRef<iDocumentNode> defaultNode =
cellsNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
defaultNode->SetValue ("celldefault");
{
csRef<iDocumentNode> node =
defaultNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("gridsize");
node->SetAttributeAsInt ("width", defaultCell->GetGridWidth());
node->SetAttributeAsInt ("height", defaultCell->GetGridHeight());
}
{
csRef<iDocumentNode> node =
defaultNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("materialmapsize");
node->SetAttributeAsInt ("width", defaultCell->GetMaterialMapWidth());
node->SetAttributeAsInt ("height", defaultCell->GetMaterialMapHeight());
}
{
csRef<iDocumentNode> node =
defaultNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("size");
synldr->WriteVector (node, defaultCell->GetSize());
}
{
iMaterialWrapper* basemat = defaultCell->GetBaseMaterial();
if (basemat)
{
csRef<iDocumentNode> node =
defaultNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("basematerial");
node->CreateNodeBefore (CS_NODE_TEXT, 0)
->SetValue (basemat->QueryObject()->GetName());
}
}
synldr->WriteBool (defaultNode, "materialmappersistent",
defaultCell->GetMaterialPersistent(), false);
{
iTerrainRenderer* render = tfact->GetRenderer();
csRef<iTerrainCellRenderProperties> defRenderProp =
render ? render->CreateProperties () : 0;
csRef<iDocumentNode> node =
defaultNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("renderproperties");
if (!SaveRenderProperties (node, defaultCell->GetRenderProperties(),
defRenderProp))
defaultNode->RemoveNode (node);
}
{
iTerrainDataFeeder* feeder = tfact->GetFeeder();
csRef<iTerrainCellFeederProperties> defFeedProp =
feeder ? feeder->CreateProperties () : 0;
csRef<iDocumentNode> node =
defaultNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("feederproperties");
if (!SaveFeederProperties (node, defaultCell->GetFeederProperties(),
defFeedProp))
defaultNode->RemoveNode (node);
}
{
iTerrainCollider* collider = tfact->GetCollider();
csRef<iTerrainCellCollisionProperties> defCollProp =
collider ? collider->CreateProperties () : 0;
csRef<iDocumentNode> node =
defaultNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("colliderproperties");
if (!SaveProperties (node, defaultCell->GetCollisionProperties(),
(iTerrainCellCollisionProperties*)defCollProp))
defaultNode->RemoveNode (node);
}
}
size_t numCells = tfact->GetCellCount();
for (size_t c = 0; c < numCells; c++)
{
iTerrainFactoryCell* cell = tfact->GetCell (c);
csRef<iDocumentNode> cellNode =
cellsNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
cellNode->SetValue ("cell");
const char* name = cell->GetName();
if (name != 0)
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("name");
node->CreateNodeBefore (CS_NODE_TEXT, 0)
->SetValue (name);
}
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("position");
synldr->WriteVector (node, cell->GetPosition());
}
if ((defaultCell->GetGridWidth() != cell->GetGridWidth())
|| (defaultCell->GetGridHeight() != cell->GetGridHeight()))
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("gridsize");
node->SetAttributeAsInt ("width", cell->GetGridWidth());
node->SetAttributeAsInt ("height", cell->GetGridHeight());
}
if ((defaultCell->GetMaterialMapWidth() != cell->GetMaterialMapWidth())
|| (defaultCell->GetMaterialMapHeight() != cell->GetMaterialMapHeight()))
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("materialmapsize");
node->SetAttributeAsInt ("width", cell->GetMaterialMapWidth());
node->SetAttributeAsInt ("height", cell->GetMaterialMapHeight());
}
if (defaultCell->GetSize() != cell->GetSize())
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("size");
synldr->WriteVector (node, cell->GetSize());
}
if ((cell->GetBaseMaterial() != 0)
&& (defaultCell->GetBaseMaterial() != cell->GetBaseMaterial()))
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("basematerial");
node->CreateNodeBefore (CS_NODE_TEXT, 0)
->SetValue (cell->GetBaseMaterial()->QueryObject()->GetName());
}
synldr->WriteBool (cellNode, "materialmappersistent",
cell->GetMaterialPersistent(), defaultCell->GetMaterialPersistent());
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("renderproperties");
if (!SaveRenderProperties (node, cell->GetRenderProperties(),
defaultCell->GetRenderProperties()))
cellNode->RemoveNode (node);
}
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("feederproperties");
if (!SaveFeederProperties (node, cell->GetFeederProperties(),
defaultCell->GetFeederProperties()))
cellNode->RemoveNode (node);
}
{
csRef<iDocumentNode> node =
cellNode->CreateNodeBefore(CS_NODE_ELEMENT, 0);
node->SetValue ("colliderproperties");
if (!SaveProperties (node, cell->GetCollisionProperties(),
defaultCell->GetCollisionProperties()))
cellNode->RemoveNode (node);
}
}
}
return true;
}
void fps::operator ++() {
feed();
}
// Consume a newline character from the token stream and
// update the current location accordingly.
inline void
consume_newline(Lexer& lex, std::size_t n) {
consume(lex, n);
feed(lex);
}
void fps::operator ++(int dummy) {
feed();
}
void Adafruit_Thermal::test(){
println("Hello World!");
feed(2);
}
void SincFilter::processAudio(const double *inputs, double *outputs, jack_nframes_t time)
{
feed(inputs[0]);
outputs[0] = process();
}
/*!
* Получение фида \b hosts.
*
* Если фид не существует, то он будет создан, при создании будет задана маска прав доступа 0400.
*/
FeedPtr Hosts::feed() const
{
return feed(FEED_NAME_HOSTS, 0600);
}
