void turn_On_PPI_to_GPIO_for_PWM(uint32_t ulPin, uint32_t gpiote_channel, NRF_TIMER_Type* Timer, uint32_t CC_channel)
{
// Initialize Programmable Peripheral Interconnect
int chan_0 = find_free_PPI_channel(255);
int chan_1 = find_free_PPI_channel(chan_0);
if ((chan_0 != 255) && (chan_1 != 255))
{
// Configure PPI channel "chan_0" to toggle "ulPin" pin on every Timer COMPARE[CC_channel] match
rfduino_ppi_channel_assign(chan_0, &((*Timer).EVENTS_COMPARE[CC_channel]), &NRF_GPIOTE->TASKS_OUT[gpiote_channel]);
// Save PPI channel number
PPI_Channels_Occupied[ulPin][0] = chan_0;
// Configure PPI channel "chan_1" to toggle "ulPin" pin on every Timer COMPARE[3] match
rfduino_ppi_channel_assign(chan_1, &((*Timer).EVENTS_COMPARE[3]), &NRF_GPIOTE->TASKS_OUT[gpiote_channel]);
// Save PPI channel number
PPI_Channels_Occupied[ulPin][1] = chan_1;
}
}
/**********************************************************************
name :
function : called by wiring_digital.c
**********************************************************************/
void PPI_ON_TIMER_GPIO(uint32_t gpiote_channel, NRF_TIMER_Type* Timer, uint32_t CC_channel)
{
uint32_t err_code = NRF_SUCCESS, chen;
// Initialize Programmable Peripheral Interconnect
int chan_0 = find_free_PPI_channel(255);
int chan_1 = find_free_PPI_channel(chan_0);
if ((chan_0 != 255) && (chan_1 != 255))
{
err_code = sd_softdevice_is_enabled(&softdevice_enabled);
APP_ERROR_CHECK(err_code);
if (softdevice_enabled == 0)
{
// Enable PPI using registers
NRF_PPI->CH[chan_0].EEP = (uint32_t)( &((*Timer).EVENTS_COMPARE[CC_channel]) );
NRF_PPI->CH[chan_0].TEP = (uint32_t)( &NRF_GPIOTE->TASKS_OUT[gpiote_channel] );
NRF_PPI->CHEN |= ( 1 << chan_0);
// Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][0] = chan_0;
// Configure PPI channel "chan_1" to toggle "ulPin" pin on every Timer COMPARE[3] match
NRF_PPI->CH[chan_1].EEP = (uint32_t)( &((*Timer).EVENTS_COMPARE[3]) );
NRF_PPI->CH[chan_1].TEP = (uint32_t)( &NRF_GPIOTE->TASKS_OUT[gpiote_channel] );
NRF_PPI->CHEN |= ( 1 << chan_1);
// Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][1] = chan_1;
//simple_uart_printHEX(NRF_PPI->CHEN);
}
else
{
//Enable PPI using sd_ppi_x
err_code = sd_ppi_channel_assign(chan_0, &((*Timer).EVENTS_COMPARE[CC_channel]), &NRF_GPIOTE->TASKS_OUT[gpiote_channel]);
APP_ERROR_CHECK(err_code);
err_code = sd_ppi_channel_enable_set(1 << chan_0);
APP_ERROR_CHECK(err_code);
//Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][0] = chan_0;
err_code = sd_ppi_channel_assign(chan_1, &((*Timer).EVENTS_COMPARE[3]), &NRF_GPIOTE->TASKS_OUT[gpiote_channel]);
APP_ERROR_CHECK(err_code);
err_code = sd_ppi_channel_enable_set(1 << chan_1 );
APP_ERROR_CHECK(err_code);
//Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][1] = chan_1;
err_code = sd_ppi_channel_enable_get(&chen);
APP_ERROR_CHECK(err_code);
}
}
/*
if(0 == gpiote_channel)
{
NRF_PPI->CH[9].EEP = (uint32_t)( &((*Timer).EVENTS_COMPARE[CC_channel]) );
NRF_PPI->CH[9].TEP = (uint32_t)( &NRF_GPIOTE->TASKS_OUT[gpiote_channel] );
NRF_PPI->CHEN |= ( 1 << 9);
// Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][0] = 9;
NRF_PPI->CH[10].EEP = (uint32_t)( &((*Timer).EVENTS_COMPARE[3]) );
NRF_PPI->CH[10].TEP = (uint32_t)( &NRF_GPIOTE->TASKS_OUT[gpiote_channel] );
NRF_PPI->CHEN |= ( 1 << 10);
// Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][1] = 10;
}
else if(1 == gpiote_channel)
{
NRF_PPI->CH[11].EEP = (uint32_t)( &((*Timer).EVENTS_COMPARE[CC_channel]) );
NRF_PPI->CH[11].TEP = (uint32_t)( &NRF_GPIOTE->TASKS_OUT[gpiote_channel] );
NRF_PPI->CHEN |= ( 1 << 11);
// Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][0] = 11;
NRF_PPI->CH[12].EEP = (uint32_t)( &((*Timer).EVENTS_COMPARE[3]) );
NRF_PPI->CH[12].TEP = (uint32_t)( &NRF_GPIOTE->TASKS_OUT[gpiote_channel] );
NRF_PPI->CHEN |= ( 1 << 12);
// Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][1] = 12;
}
else if(2 == gpiote_channel)
{
NRF_PPI->CH[13].EEP = (uint32_t)( &((*Timer).EVENTS_COMPARE[CC_channel]) );
NRF_PPI->CH[13].TEP = (uint32_t)( &NRF_GPIOTE->TASKS_OUT[gpiote_channel] );
NRF_PPI->CHEN |= ( 1 << 13);
// Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][0] = 13;
NRF_PPI->CH[14].EEP = (uint32_t)( &((*Timer).EVENTS_COMPARE[3]) );
NRF_PPI->CH[14].TEP = (uint32_t)( &NRF_GPIOTE->TASKS_OUT[gpiote_channel] );
NRF_PPI->CHEN |= ( 1 << 14);
// Save PPI channel number
PPI_Channels_Occupied[gpiote_channel][1] = 14;
}
*/
}
