예제 #1
0
static int send_recv()
{
	struct fi_cq_entry comp;
	int ret;

	ret = fi_recv(ep, rx_buf, rx_size + ft_rx_prefix_size(),
		      mr_desc, 0, &rx_ctx);
	if (ret)
		return ret;

	ft_sync();

	fprintf(stdout, "Posting a send...\n");
	ret = ft_post_tx(ep, remote_fi_addr, tx_size, NO_CQ_DATA, &tx_ctx);
	if (ret)
		return ret;

	while ((tx_cq_cntr < tx_seq) || (rx_cq_cntr < rx_seq)) {
		/* Wait for completion events on CQs */
		ret = fi_wait(waitset, -1);
		if (ret < 0) {
			FT_PRINTERR("fi_wait", ret);
			return ret;
		}

		/* Read the send completion entry */
		ret = fi_cq_read(txcq, &comp, 1);
		if (ret > 0) {
			tx_cq_cntr++;
			fprintf(stdout, "Received send completion event!\n");
		} else if (ret < 0 && ret != -FI_EAGAIN) {
			if (ret == -FI_EAVAIL) {
				ret = ft_cq_readerr(txcq);
			} else {
				FT_PRINTERR("fi_cq_read", ret);
			}
			return ret;
		}

		/* Read the recv completion entry */
		ret = fi_cq_read(rxcq, &comp, 1);
		if (ret > 0) {
			rx_cq_cntr++;
			fprintf(stdout, "Received recv completion event!\n");
		} else if (ret < 0 && ret != -FI_EAGAIN) {
			if (ret == -FI_EAVAIL) {
				ret = ft_cq_readerr(rxcq);
			} else {
				FT_PRINTERR("fi_cq_read", ret);
			}
			return ret;
		}
	}

	return 0;
}
예제 #2
0
파일: shared.c 프로젝트: arsmith10/fabtests
ssize_t ft_tx(size_t size)
{
	ssize_t ret;

	if (ft_check_opts(FT_OPT_VERIFY_DATA | FT_OPT_ACTIVE))
		ft_fill_buf((char *) tx_buf + ft_tx_prefix_size(), size);

	ret = ft_post_tx(size);
	if (ret)
		return ret;

	ret = ft_get_tx_comp(tx_seq);
	return ret;
}
예제 #3
0
ssize_t ft_tx(struct fid_ep *ep, fi_addr_t fi_addr, size_t size, struct fi_context *ctx)
{
	ssize_t ret;

	if (ft_check_opts(FT_OPT_VERIFY_DATA | FT_OPT_ACTIVE))
		ft_fill_buf((char *) tx_buf + ft_tx_prefix_size(), size);

	ret = ft_post_tx(ep, fi_addr, size, ctx);
	if (ret)
		return ret;

	ret = ft_get_tx_comp(tx_seq);
	return ret;
}
예제 #4
0
static int send_recv()
{
	struct fi_cq_entry comp;
	int ret;

	fprintf(stdout, "Posting a send...\n");
	ret = ft_post_tx(tx_size);
	if (ret)
		return ret;

	while ((tx_cq_cntr < tx_seq) || (rx_cq_cntr < rx_seq)) {
		/* Wait for completion events on CQs */
		ret = fi_wait(waitset, -1);
		if (ret < 0) {
			FT_PRINTERR("fi_wait", ret);
			return ret;
		}

		/* Read the send completion entry */
		ret = fi_cq_read(txcq, &comp, 1);
		if (ret > 0) {
			tx_cq_cntr++;
			fprintf(stdout, "Received send completion event!\n");
		} else if (ret < 0 && ret != -FI_EAGAIN) {
			if (ret == -FI_EAVAIL) {
				ret = ft_cq_readerr(txcq);
			} else {
				FT_PRINTERR("fi_cq_read", ret);
			}
			return ret;
		}

		/* Read the recv completion entry */
		ret = fi_cq_read(rxcq, &comp, 1);
		if (ret > 0) {
			rx_cq_cntr++;
			fprintf(stdout, "Received recv completion event!\n");
		} else if (ret < 0 && ret != -FI_EAGAIN) {
			if (ret == -FI_EAVAIL) {
				ret = ft_cq_readerr(rxcq);
			} else {
				FT_PRINTERR("fi_cq_read", ret);
			}
			return ret;
		}
	}

	return 0;
}
예제 #5
0
static int do_transfers(void)
{
	int i, ret;

	for (i = 0; i < num_eps; i++) {
		rx_buf = recv_bufs[i];
		ret = ft_post_rx(eps[i], opts.transfer_size, &recv_ctx[i]);
		if (ret)
			return ret;
	}

	for (i = 0; i < num_eps; i++) {
		if (ft_check_opts(FT_OPT_VERIFY_DATA))
			ft_fill_buf(send_bufs[i], opts.transfer_size);

		tx_buf = send_bufs[i];
		ret = ft_post_tx(eps[i], remote_addr[i], opts.transfer_size, &send_ctx[i]);
		if (ret)
			return ret;
	}

	ret = ft_get_tx_comp(num_eps);
	if (ret < 0)
		return ret;

	ret = ft_get_rx_comp(num_eps);
	if (ret < 0)
		return ret;

	if (ft_check_opts(FT_OPT_VERIFY_DATA)) {
		for (i = 0; i < num_eps; i++) {
			ret = ft_check_buf(recv_bufs[i], opts.transfer_size);
			if (ret)
				return ret;
		}
	}

	for (i = 0; i < num_eps; i++)
		ft_finalize_ep(eps[i]);

	printf("PASSED multi ep\n");
	return 0;
}
예제 #6
0
int bandwidth(void)
{
	int ret, i, j;

	ret = ft_sync();
	if (ret)
		return ret;

	/* The loop structured allows for the possibility that the sender
	 * immediately overruns the receiving side on the first transfer (or
	 * the entire window). This could result in exercising parts of the
	 * provider's implementation of FI_RM_ENABLED. For better or worse,
	 * some MPI-level benchmarks tend to use this type of loop for measuring
	 * bandwidth.  */

	if (opts.dst_addr) {
		for (i = 0; i < opts.iterations + opts.warmup_iterations; i++) {
			if (i == opts.warmup_iterations)
				ft_start();

			for(j = 0; j < opts.window_size; j++) {
				if (opts.transfer_size < fi->tx_attr->inject_size)
					ret = ft_inject(opts.transfer_size);
				else
					ret = ft_post_tx(opts.transfer_size);
				if (ret)
					return ret;
			}
			ret = ft_get_tx_comp(tx_seq);
			if (ret)
				return ret;
			ret = ft_rx(4);
			if (ret)
				return ret;
		}
	} else {
		for (i = 0; i < opts.iterations + opts.warmup_iterations; i++) {
			if (i == opts.warmup_iterations)
				ft_start();

			for(j = 0; j < opts.window_size; j++) {
				ret = ft_post_rx(opts.transfer_size);
				if (ret)
					return ret;
			}
			ret = ft_get_rx_comp(rx_seq-1); /* rx_seq is always one ahead */
			if (ret)
				return ret;
			ret = ft_tx(4);
			if (ret)
				return ret;
		}
	}
	ft_stop();

	if (opts.machr)
		show_perf_mr(opts.transfer_size, opts.iterations, &start, &end,
				opts.window_size, opts.argc, opts.argv);
	else
		show_perf(NULL, opts.transfer_size, opts.iterations, &start, &end,
				opts.window_size);

	return 0;
}
예제 #7
0
static int send_recv()
{
	struct fi_cq_entry comp;
	struct epoll_event event;
	struct fid *fids[1];
	int ret;
	const char *message = "Hello from Client!";
	size_t message_len = strlen(message) + 1;

	if (opts.dst_addr) {
		fprintf(stdout, "Posting a send...\n");
		if (snprintf(tx_buf, tx_size, "%s", message) >= tx_size) {
			fprintf(stderr, "Transmit buffer too small.\n");
			return -FI_ETOOSMALL;
		}
		ret = ft_post_tx(ep, remote_fi_addr, message_len, NO_CQ_DATA, &tx_ctx);
		if (ret)
			return ret;

		memset(&event, 0, sizeof event);
		fids[0] = &txcq->fid;
		do {
			if (fi_trywait(fabric, fids, 1) == FI_SUCCESS) {
				ret = TEMP_FAILURE_RETRY(epoll_wait(epfd, &event, 1, -1));
				if (ret < 0) {
					ret = -errno;
					FT_PRINTERR("epoll_wait", ret);
					return ret;
				}

				if (event.data.ptr != &txcq->fid)
					fprintf(stdout, "unexpected event!\n");
			}

			ret = fi_cq_read(txcq, &comp, 1);
		} while (ret == -FI_EAGAIN);

		if (ret < 0) {
			if (ret == -FI_EAVAIL)
				ret = ft_cq_readerr(txcq);
			return ret;
		}

		fprintf(stdout, "Send completion received\n");
	} else {
		fprintf(stdout, "Waiting for client...\n");

		memset(&event, 0, sizeof event);
		fids[0] = &rxcq->fid;
		do {
			if (fi_trywait(fabric, fids, 1) == FI_SUCCESS) {
				ret = TEMP_FAILURE_RETRY(epoll_wait(epfd, &event, 1, -1));
				if (ret < 0) {
					ret = -errno;
					FT_PRINTERR("epoll_wait", ret);
					return ret;
				}

				if (event.data.ptr != &rxcq->fid) {
					fprintf(stdout, "unexpected event!\n");
				}
			}

			ret = fi_cq_read(rxcq, &comp, 1);
		} while (ret == -FI_EAGAIN);

		if (ret < 0) {
			if (ret == -FI_EAVAIL)
				ret = ft_cq_readerr(rxcq);
			return ret;
		}

		ret = check_recv_msg(message);
		if (ret)
			return ret;

		fprintf(stdout, "Received data from client: %s\n", (char *) rx_buf);
	}

	return 0;
}