feather_callback void do_sched_trace_task_release(unsigned long id, unsigned long _task)
{
struct task_struct *t = (struct task_struct*) _task;
struct st_event_record* rec = get_record(ST_RELEASE, t);
if (rec) {
rec->data.release.release = get_release(t);
rec->data.release.deadline = get_deadline(t);
put_record(rec);
}
}
/*
* Cross-validate Release file by checking if it can also be accessed using
* its codename if we got it using a suite and vice versa; if successful,
* check that it really matches the earlier Release file.
* Returns false only if an invalid Release file was found.
*/
static int cross_validate_release(struct release_t *release) {
struct release_t t_release;
int ret = 1;
memset(&t_release, 0, sizeof(t_release));
/* Preset status field to prevent endless recursion. */
t_release.status = (release->status & (GET_SUITE | GET_CODENAME));
/* Only one of the two following conditions can trigger. */
if (release->suite != NULL && !(release->status & GET_SUITE)) {
/* Cross-validate the suite */
if (get_release(&t_release, release->suite)) {
if ((t_release.status & IS_VALID) &&
strcmp(t_release.name, release->name) == 0) {
release->status |= (t_release.status & GET_SUITE);
} else {
release->status &= ~IS_VALID;
ret = 0;
}
}
}
if (release->name != NULL && !(release->status & GET_CODENAME)) {
/* Cross-validate the codename (release->name) */
if (get_release(&t_release, release->name)) {
if ((t_release.status & IS_VALID) &&
strcmp(t_release.suite, release->suite) == 0) {
release->status |= (t_release.status & GET_CODENAME);
} else {
release->status &= ~IS_VALID;
ret = 0;
}
}
}
free(t_release.name);
free(t_release.suite);
return ret;
}
static int
pcap_activate_dlpi(pcap_t *p)
{
#ifdef DL_HP_RAWDLS
struct pcap_dlpi *pd = p->priv;
#endif
int status = 0;
int retv;
register char *cp;
int ppa;
#ifdef HAVE_SOLARIS
int isatm = 0;
#endif
register dl_info_ack_t *infop;
#ifdef HAVE_SYS_BUFMOD_H
bpf_u_int32 ss;
#ifdef HAVE_SOLARIS
register char *release;
bpf_u_int32 osmajor, osminor, osmicro;
#endif
#endif
bpf_u_int32 buf[MAXDLBUF];
char dname[100];
#ifndef HAVE_DEV_DLPI
char dname2[100];
#endif
#ifdef HAVE_DEV_DLPI
/*
** Remove any "/dev/" on the front of the device.
*/
cp = strrchr(p->opt.source, '/');
if (cp == NULL)
strlcpy(dname, p->opt.source, sizeof(dname));
else
strlcpy(dname, cp + 1, sizeof(dname));
/*
* Split the device name into a device type name and a unit number;
* chop off the unit number, so "dname" is just a device type name.
*/
cp = split_dname(dname, &ppa, p->errbuf);
if (cp == NULL) {
status = PCAP_ERROR_NO_SUCH_DEVICE;
goto bad;
}
*cp = '\0';
/*
* Use "/dev/dlpi" as the device.
*
* XXX - HP's DLPI Programmer's Guide for HP-UX 11.00 says that
* the "dl_mjr_num" field is for the "major number of interface
* driver"; that's the major of "/dev/dlpi" on the system on
* which I tried this, but there may be DLPI devices that
* use a different driver, in which case we may need to
* search "/dev" for the appropriate device with that major
* device number, rather than hardwiring "/dev/dlpi".
*/
cp = "/dev/dlpi";
if ((p->fd = open(cp, O_RDWR)) < 0) {
if (errno == EPERM || errno == EACCES)
status = PCAP_ERROR_PERM_DENIED;
else
status = PCAP_ERROR;
snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"%s: %s", cp, pcap_strerror(errno));
goto bad;
}
#ifdef DL_HP_RAWDLS
/*
* XXX - HP-UX 10.20 and 11.xx don't appear to support sending and
* receiving packets on the same descriptor - you need separate
* descriptors for sending and receiving, bound to different SAPs.
*
* If the open fails, we just leave -1 in "pd->send_fd" and reject
* attempts to send packets, just as if, in pcap-bpf.c, we fail
* to open the BPF device for reading and writing, we just try
* to open it for reading only and, if that succeeds, just let
* the send attempts fail.
*/
pd->send_fd = open(cp, O_RDWR);
#endif
/*
* Get a table of all PPAs for that device, and search that
* table for the specified device type name and unit number.
*/
ppa = get_dlpi_ppa(p->fd, dname, ppa, p->errbuf);
if (ppa < 0) {
status = ppa;
goto bad;
}
#else
/*
* If the device name begins with "/", assume it begins with
* the pathname of the directory containing the device to open;
* otherwise, concatenate the device directory name and the
* device name.
*/
if (*p->opt.source == '/')
strlcpy(dname, p->opt.source, sizeof(dname));
else
snprintf(dname, sizeof(dname), "%s/%s", PCAP_DEV_PREFIX,
p->opt.source);
/*
* Get the unit number, and a pointer to the end of the device
* type name.
*/
cp = split_dname(dname, &ppa, p->errbuf);
if (cp == NULL) {
status = PCAP_ERROR_NO_SUCH_DEVICE;
goto bad;
}
/*
* Make a copy of the device pathname, and then remove the unit
* number from the device pathname.
*/
strlcpy(dname2, dname, sizeof(dname));
*cp = '\0';
/* Try device without unit number */
if ((p->fd = open(dname, O_RDWR)) < 0) {
if (errno != ENOENT) {
if (errno == EPERM || errno == EACCES)
status = PCAP_ERROR_PERM_DENIED;
else
status = PCAP_ERROR;
snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s", dname,
pcap_strerror(errno));
goto bad;
}
/* Try again with unit number */
if ((p->fd = open(dname2, O_RDWR)) < 0) {
if (errno == ENOENT) {
status = PCAP_ERROR_NO_SUCH_DEVICE;
/*
* We provide an error message even
* for this error, for diagnostic
* purposes (so that, for example,
* the app can show the message if the
* user requests it).
*
* In it, we just report "No DLPI device
* found" with the device name, so people
* don't get confused and think, for example,
* that if they can't capture on "lo0"
* on Solaris the fix is to change libpcap
* (or the application that uses it) to
* look for something other than "/dev/lo0",
* as the fix is to look for an operating
* system other than Solaris - you just
* *can't* capture on a loopback interface
* on Solaris, the lack of a DLPI device
* for the loopback interface is just a
* symptom of that inability.
*/
snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"%s: No DLPI device found", p->opt.source);
} else {
if (errno == EPERM || errno == EACCES)
status = PCAP_ERROR_PERM_DENIED;
else
status = PCAP_ERROR;
snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s",
dname2, pcap_strerror(errno));
}
goto bad;
}
/* XXX Assume unit zero */
ppa = 0;
}
#endif
/*
** Attach if "style 2" provider
*/
if (dlinforeq(p->fd, p->errbuf) < 0 ||
dlinfoack(p->fd, (char *)buf, p->errbuf) < 0) {
status = PCAP_ERROR;
goto bad;
}
infop = &(MAKE_DL_PRIMITIVES(buf))->info_ack;
#ifdef HAVE_SOLARIS
if (infop->dl_mac_type == DL_IPATM)
isatm = 1;
#endif
if (infop->dl_provider_style == DL_STYLE2) {
retv = dl_doattach(p->fd, ppa, p->errbuf);
if (retv < 0) {
status = retv;
goto bad;
}
#ifdef DL_HP_RAWDLS
if (pd->send_fd >= 0) {
retv = dl_doattach(pd->send_fd, ppa, p->errbuf);
if (retv < 0) {
status = retv;
goto bad;
}
}
#endif
}
if (p->opt.rfmon) {
/*
* This device exists, but we don't support monitor mode
* any platforms that support DLPI.
*/
status = PCAP_ERROR_RFMON_NOTSUP;
goto bad;
}
#ifdef HAVE_DLPI_PASSIVE
/*
* Enable Passive mode to be able to capture on aggregated link.
* Not supported in all Solaris versions.
*/
dlpassive(p->fd, p->errbuf);
#endif
/*
** Bind (defer if using HP-UX 9 or HP-UX 10.20 or later, totally
** skip if using SINIX)
*/
#if !defined(HAVE_HPUX9) && !defined(HAVE_HPUX10_20_OR_LATER) && !defined(sinix)
#ifdef _AIX
/*
** AIX.
** According to IBM's AIX Support Line, the dl_sap value
** should not be less than 0x600 (1536) for standard Ethernet.
** However, we seem to get DL_BADADDR - "DLSAP addr in improper
** format or invalid" - errors if we use 1537 on the "tr0"
** device, which, given that its name starts with "tr" and that
** it's IBM, probably means a Token Ring device. (Perhaps we
** need to use 1537 on "/dev/dlpi/en" because that device is for
** D/I/X Ethernet, the "SAP" is actually an Ethernet type, and
** it rejects invalid Ethernet types.)
**
** So if 1537 fails, we try 2, as Hyung Sik Yoon of IBM Korea
** says that works on Token Ring (he says that 0 does *not*
** work; perhaps that's considered an invalid LLC SAP value - I
** assume the SAP value in a DLPI bind is an LLC SAP for network
** types that use 802.2 LLC).
*/
if ((dlbindreq(p->fd, 1537, p->errbuf) < 0 &&
dlbindreq(p->fd, 2, p->errbuf) < 0) ||
dlbindack(p->fd, (char *)buf, p->errbuf, NULL) < 0) {
status = PCAP_ERROR;
goto bad;
}
#elif defined(DL_HP_RAWDLS)
/*
** HP-UX 10.0x and 10.1x.
*/
if (dl_dohpuxbind(p->fd, p->errbuf) < 0) {
status = PCAP_ERROR;
goto bad;
}
if (pd->send_fd >= 0) {
/*
** XXX - if this fails, just close send_fd and
** set it to -1, so that you can't send but can
** still receive?
*/
if (dl_dohpuxbind(pd->send_fd, p->errbuf) < 0) {
status = PCAP_ERROR;
goto bad;
}
}
#else /* neither AIX nor HP-UX */
/*
** Not Sinix, and neither AIX nor HP-UX - Solaris, and any other
** OS using DLPI.
**/
if (dlbindreq(p->fd, 0, p->errbuf) < 0 ||
dlbindack(p->fd, (char *)buf, p->errbuf, NULL) < 0) {
status = PCAP_ERROR;
goto bad;
}
#endif /* AIX vs. HP-UX vs. other */
#endif /* !HP-UX 9 and !HP-UX 10.20 or later and !SINIX */
#ifdef HAVE_SOLARIS
if (isatm) {
/*
** Have to turn on some special ATM promiscuous mode
** for SunATM.
** Do *NOT* turn regular promiscuous mode on; it doesn't
** help, and may break things.
*/
if (strioctl(p->fd, A_PROMISCON_REQ, 0, NULL) < 0) {
status = PCAP_ERROR;
snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"A_PROMISCON_REQ: %s", pcap_strerror(errno));
goto bad;
}
} else
#endif
if (p->opt.promisc) {
/*
** Enable promiscuous (not necessary on send FD)
*/
retv = dlpromiscon(p, DL_PROMISC_PHYS);
if (retv < 0) {
if (retv == PCAP_ERROR_PERM_DENIED)
status = PCAP_ERROR_PROMISC_PERM_DENIED;
else
status = retv;
goto bad;
}
/*
** Try to enable multicast (you would have thought
** promiscuous would be sufficient). (Skip if using
** HP-UX or SINIX) (Not necessary on send FD)
*/
#if !defined(__hpux) && !defined(sinix)
retv = dlpromiscon(p, DL_PROMISC_MULTI);
if (retv < 0)
status = PCAP_WARNING;
#endif
}
/*
** Try to enable SAP promiscuity (when not in promiscuous mode
** when using HP-UX, when not doing SunATM on Solaris, and never
** under SINIX) (Not necessary on send FD)
*/
#ifndef sinix
#if defined(__hpux)
/* HP-UX - only do this when not in promiscuous mode */
if (!p->opt.promisc) {
#elif defined(HAVE_SOLARIS)
/* Solaris - don't do this on SunATM devices */
if (!isatm) {
#else
/* Everything else (except for SINIX) - always do this */
{
#endif
retv = dlpromiscon(p, DL_PROMISC_SAP);
if (retv < 0) {
if (p->opt.promisc) {
/*
* Not fatal, since the DL_PROMISC_PHYS mode
* worked.
*
* Report it as a warning, however.
*/
status = PCAP_WARNING;
} else {
/*
* Fatal.
*/
status = retv;
goto bad;
}
}
}
#endif /* sinix */
/*
** HP-UX 9, and HP-UX 10.20 or later, must bind after setting
** promiscuous options.
*/
#if defined(HAVE_HPUX9) || defined(HAVE_HPUX10_20_OR_LATER)
if (dl_dohpuxbind(p->fd, p->errbuf) < 0) {
status = PCAP_ERROR;
goto bad;
}
/*
** We don't set promiscuous mode on the send FD, but we'll defer
** binding it anyway, just to keep the HP-UX 9/10.20 or later
** code together.
*/
if (pd->send_fd >= 0) {
/*
** XXX - if this fails, just close send_fd and
** set it to -1, so that you can't send but can
** still receive?
*/
if (dl_dohpuxbind(pd->send_fd, p->errbuf) < 0) {
status = PCAP_ERROR;
goto bad;
}
}
#endif
/*
** Determine link type
** XXX - get SAP length and address length as well, for use
** when sending packets.
*/
if (dlinforeq(p->fd, p->errbuf) < 0 ||
dlinfoack(p->fd, (char *)buf, p->errbuf) < 0) {
status = PCAP_ERROR;
goto bad;
}
infop = &(MAKE_DL_PRIMITIVES(buf))->info_ack;
if (pcap_process_mactype(p, infop->dl_mac_type) != 0) {
status = PCAP_ERROR;
goto bad;
}
#ifdef DLIOCRAW
/*
** This is a non standard SunOS hack to get the full raw link-layer
** header.
*/
if (strioctl(p->fd, DLIOCRAW, 0, NULL) < 0) {
status = PCAP_ERROR;
snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "DLIOCRAW: %s",
pcap_strerror(errno));
goto bad;
}
#endif
#ifdef HAVE_SYS_BUFMOD_H
ss = p->snapshot;
/*
** There is a bug in bufmod(7). When dealing with messages of
** less than snaplen size it strips data from the beginning not
** the end.
**
** This bug is fixed in 5.3.2. Also, there is a patch available.
** Ask for bugid 1149065.
*/
#ifdef HAVE_SOLARIS
release = get_release(&osmajor, &osminor, &osmicro);
if (osmajor == 5 && (osminor <= 2 || (osminor == 3 && osmicro < 2)) &&
getenv("BUFMOD_FIXED") == NULL) {
snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
"WARNING: bufmod is broken in SunOS %s; ignoring snaplen.",
release);
ss = 0;
status = PCAP_WARNING;
}
#endif
/* Push and configure bufmod. */
if (pcap_conf_bufmod(p, ss) != 0) {
status = PCAP_ERROR;
goto bad;
}
#endif
/*
** As the last operation flush the read side.
*/
if (ioctl(p->fd, I_FLUSH, FLUSHR) != 0) {
status = PCAP_ERROR;
snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "FLUSHR: %s",
pcap_strerror(errno));
goto bad;
}
/* Allocate data buffer. */
if (pcap_alloc_databuf(p) != 0) {
status = PCAP_ERROR;
goto bad;
}
/*
* Success.
*
* "p->fd" is an FD for a STREAMS device, so "select()" and
* "poll()" should work on it.
*/
p->selectable_fd = p->fd;
p->read_op = pcap_read_dlpi;
p->inject_op = pcap_inject_dlpi;
p->setfilter_op = install_bpf_program; /* no kernel filtering */
p->setdirection_op = NULL; /* Not implemented.*/
p->set_datalink_op = NULL; /* can't change data link type */
p->getnonblock_op = pcap_getnonblock_fd;
p->setnonblock_op = pcap_setnonblock_fd;
p->stats_op = pcap_stats_dlpi;
p->cleanup_op = pcap_cleanup_dlpi;
return (status);
bad:
pcap_cleanup_dlpi(p);
return (status);
}
/*
* Split a device name into a device type name and a unit number;
* return the a pointer to the beginning of the unit number, which
* is the end of the device type name, and set "*unitp" to the unit
* number.
*
* Returns NULL on error, and fills "ebuf" with an error message.
*/
static char *
split_dname(char *device, int *unitp, char *ebuf)
{
char *cp;
char *eos;
long unit;
/*
* Look for a number at the end of the device name string.
*/
cp = device + strlen(device) - 1;
if (*cp < '0' || *cp > '9') {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s missing unit number",
device);
return (NULL);
}
/* Digits at end of string are unit number */
while (cp-1 >= device && *(cp-1) >= '0' && *(cp-1) <= '9')
cp--;
errno = 0;
unit = strtol(cp, &eos, 10);
if (*eos != '\0') {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s bad unit number", device);
return (NULL);
}
if (errno == ERANGE || unit > INT_MAX) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s unit number too large",
device);
return (NULL);
}
if (unit < 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s unit number is negative",
device);
return (NULL);
}
*unitp = (int)unit;
return (cp);
}
static int
dl_doattach(int fd, int ppa, char *ebuf)
{
dl_attach_req_t req;
bpf_u_int32 buf[MAXDLBUF];
int err;
req.dl_primitive = DL_ATTACH_REQ;
req.dl_ppa = ppa;
if (send_request(fd, (char *)&req, sizeof(req), "attach", ebuf) < 0)
return (PCAP_ERROR);
err = dlokack(fd, "attach", (char *)buf, ebuf);
if (err < 0)
return (err);
return (0);
}
pcap_t *
pcap_open_live(const char *device, int snaplen, int promisc, int to_ms,
char *ebuf)
{
register char *cp;
register pcap_t *p;
int ppa;
#ifdef HAVE_SOLARIS
int isatm = 0;
#endif
register dl_info_ack_t *infop;
#ifdef HAVE_SYS_BUFMOD_H
bpf_u_int32 ss, chunksize;
#ifdef HAVE_SOLARIS
register char *release;
bpf_u_int32 osmajor, osminor, osmicro;
#endif
#endif
bpf_u_int32 buf[MAXDLBUF];
char dname[100];
#ifndef HAVE_DEV_DLPI
char dname2[100];
#endif
p = (pcap_t *)malloc(sizeof(*p));
if (p == NULL) {
strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
return (NULL);
}
memset(p, 0, sizeof(*p));
p->fd = -1; /* indicate that it hasn't been opened yet */
p->send_fd = -1;
#ifdef HAVE_DEV_DLPI
/*
** Remove any "/dev/" on the front of the device.
*/
cp = strrchr(device, '/');
if (cp == NULL)
strlcpy(dname, device, sizeof(dname));
else
strlcpy(dname, cp + 1, sizeof(dname));
/*
* Split the device name into a device type name and a unit number;
* chop off the unit number, so "dname" is just a device type name.
*/
cp = split_dname(dname, &ppa, ebuf);
if (cp == NULL)
goto bad;
*cp = '\0';
/*
* Use "/dev/dlpi" as the device.
*
* XXX - HP's DLPI Programmer's Guide for HP-UX 11.00 says that
* the "dl_mjr_num" field is for the "major number of interface
* driver"; that's the major of "/dev/dlpi" on the system on
* which I tried this, but there may be DLPI devices that
* use a different driver, in which case we may need to
* search "/dev" for the appropriate device with that major
* device number, rather than hardwiring "/dev/dlpi".
*/
cp = "/dev/dlpi";
if ((p->fd = open(cp, O_RDWR)) < 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"%s: %s", cp, pcap_strerror(errno));
goto bad;
}
#ifdef DL_HP_RAWDLS
/*
* XXX - HP-UX 10.20 and 11.xx don't appear to support sending and
* receiving packets on the same descriptor - you need separate
* descriptors for sending and receiving, bound to different SAPs.
*
* If the open fails, we just leave -1 in "p->send_fd" and reject
* attempts to send packets, just as if, in pcap-bpf.c, we fail
* to open the BPF device for reading and writing, we just try
* to open it for reading only and, if that succeeds, just let
* the send attempts fail.
*/
p->send_fd = open(cp, O_RDWR);
#endif
/*
* Get a table of all PPAs for that device, and search that
* table for the specified device type name and unit number.
*/
ppa = get_dlpi_ppa(p->fd, dname, ppa, ebuf);
if (ppa < 0)
goto bad;
#else
/*
* If the device name begins with "/", assume it begins with
* the pathname of the directory containing the device to open;
* otherwise, concatenate the device directory name and the
* device name.
*/
if (*device == '/')
strlcpy(dname, device, sizeof(dname));
else
snprintf(dname, sizeof(dname), "%s/%s", PCAP_DEV_PREFIX,
device);
/*
* Get the unit number, and a pointer to the end of the device
* type name.
*/
cp = split_dname(dname, &ppa, ebuf);
if (cp == NULL)
goto bad;
/*
* Make a copy of the device pathname, and then remove the unit
* number from the device pathname.
*/
strlcpy(dname2, dname, sizeof(dname));
*cp = '\0';
/* Try device without unit number */
if ((p->fd = open(dname, O_RDWR)) < 0) {
if (errno != ENOENT) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s", dname,
pcap_strerror(errno));
goto bad;
}
/* Try again with unit number */
if ((p->fd = open(dname2, O_RDWR)) < 0) {
if (errno == ENOENT) {
/*
* We just report "No DLPI device found"
* with the device name, so people don't
* get confused and think, for example,
* that if they can't capture on "lo0"
* on Solaris the fix is to change libpcap
* (or the application that uses it) to
* look for something other than "/dev/lo0",
* as the fix is to look for an operating
* system other than Solaris - you just
* *can't* capture on a loopback interface
* on Solaris, the lack of a DLPI device
* for the loopback interface is just a
* symptom of that inability.
*/
snprintf(ebuf, PCAP_ERRBUF_SIZE,
"%s: No DLPI device found", device);
} else {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s",
dname2, pcap_strerror(errno));
}
goto bad;
}
/* XXX Assume unit zero */
ppa = 0;
}
#endif
p->snapshot = snaplen;
/*
** Attach if "style 2" provider
*/
if (dlinforeq(p->fd, ebuf) < 0 ||
dlinfoack(p->fd, (char *)buf, ebuf) < 0)
goto bad;
infop = &((union DL_primitives *)buf)->info_ack;
#ifdef HAVE_SOLARIS
if (infop->dl_mac_type == DL_IPATM)
isatm = 1;
#endif
if (infop->dl_provider_style == DL_STYLE2) {
if (dl_doattach(p->fd, ppa, ebuf) < 0)
goto bad;
#ifdef DL_HP_RAWDLS
if (p->send_fd >= 0) {
if (dl_doattach(p->send_fd, ppa, ebuf) < 0)
goto bad;
}
#endif
}
/*
** Bind (defer if using HP-UX 9 or HP-UX 10.20 or later, totally
** skip if using SINIX)
*/
#if !defined(HAVE_HPUX9) && !defined(HAVE_HPUX10_20_OR_LATER) && !defined(sinix)
#ifdef _AIX
/*
** AIX.
** According to IBM's AIX Support Line, the dl_sap value
** should not be less than 0x600 (1536) for standard Ethernet.
** However, we seem to get DL_BADADDR - "DLSAP addr in improper
** format or invalid" - errors if we use 1537 on the "tr0"
** device, which, given that its name starts with "tr" and that
** it's IBM, probably means a Token Ring device. (Perhaps we
** need to use 1537 on "/dev/dlpi/en" because that device is for
** D/I/X Ethernet, the "SAP" is actually an Ethernet type, and
** it rejects invalid Ethernet types.)
**
** So if 1537 fails, we try 2, as Hyung Sik Yoon of IBM Korea
** says that works on Token Ring (he says that 0 does *not*
** work; perhaps that's considered an invalid LLC SAP value - I
** assume the SAP value in a DLPI bind is an LLC SAP for network
** types that use 802.2 LLC).
*/
if ((dlbindreq(p->fd, 1537, ebuf) < 0 &&
dlbindreq(p->fd, 2, ebuf) < 0) ||
dlbindack(p->fd, (char *)buf, ebuf, NULL) < 0)
goto bad;
#elif defined(DL_HP_RAWDLS)
/*
** HP-UX 10.0x and 10.1x.
*/
if (dl_dohpuxbind(p->fd, ebuf) < 0)
goto bad;
if (p->send_fd >= 0) {
/*
** XXX - if this fails, just close send_fd and
** set it to -1, so that you can't send but can
** still receive?
*/
if (dl_dohpuxbind(p->send_fd, ebuf) < 0)
goto bad;
}
#else /* neither AIX nor HP-UX */
/*
** Not Sinix, and neither AIX nor HP-UX - Solaris, and any other
** OS using DLPI.
**/
if (dlbindreq(p->fd, 0, ebuf) < 0 ||
dlbindack(p->fd, (char *)buf, ebuf, NULL) < 0)
goto bad;
#endif /* AIX vs. HP-UX vs. other */
#endif /* !HP-UX 9 and !HP-UX 10.20 or later and !SINIX */
#ifdef HAVE_SOLARIS
if (isatm) {
/*
** Have to turn on some special ATM promiscuous mode
** for SunATM.
** Do *NOT* turn regular promiscuous mode on; it doesn't
** help, and may break things.
*/
if (strioctl(p->fd, A_PROMISCON_REQ, 0, NULL) < 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "A_PROMISCON_REQ: %s",
pcap_strerror(errno));
goto bad;
}
} else
#endif
if (promisc) {
/*
** Enable promiscuous (not necessary on send FD)
*/
if (dlpromisconreq(p->fd, DL_PROMISC_PHYS, ebuf) < 0 ||
dlokack(p->fd, "promisc_phys", (char *)buf, ebuf) < 0)
goto bad;
/*
** Try to enable multicast (you would have thought
** promiscuous would be sufficient). (Skip if using
** HP-UX or SINIX) (Not necessary on send FD)
*/
#if !defined(__hpux) && !defined(sinix)
if (dlpromisconreq(p->fd, DL_PROMISC_MULTI, ebuf) < 0 ||
dlokack(p->fd, "promisc_multi", (char *)buf, ebuf) < 0)
fprintf(stderr,
"WARNING: DL_PROMISC_MULTI failed (%s)\n", ebuf);
#endif
}
/*
** Try to enable SAP promiscuity (when not in promiscuous mode
** when using HP-UX, when not doing SunATM on Solaris, and never
** under SINIX) (Not necessary on send FD)
*/
#ifndef sinix
if (
#ifdef __hpux
!promisc &&
#endif
#ifdef HAVE_SOLARIS
!isatm &&
#endif
(dlpromisconreq(p->fd, DL_PROMISC_SAP, ebuf) < 0 ||
dlokack(p->fd, "promisc_sap", (char *)buf, ebuf) < 0)) {
/* Not fatal if promisc since the DL_PROMISC_PHYS worked */
if (promisc)
fprintf(stderr,
"WARNING: DL_PROMISC_SAP failed (%s)\n", ebuf);
else
goto bad;
}
#endif /* sinix */
/*
** HP-UX 9, and HP-UX 10.20 or later, must bind after setting
** promiscuous options.
*/
#if defined(HAVE_HPUX9) || defined(HAVE_HPUX10_20_OR_LATER)
if (dl_dohpuxbind(p->fd, ebuf) < 0)
goto bad;
/*
** We don't set promiscuous mode on the send FD, but we'll defer
** binding it anyway, just to keep the HP-UX 9/10.20 or later
** code together.
*/
if (p->send_fd >= 0) {
/*
** XXX - if this fails, just close send_fd and
** set it to -1, so that you can't send but can
** still receive?
*/
if (dl_dohpuxbind(p->send_fd, ebuf) < 0)
goto bad;
}
#endif
/*
** Determine link type
** XXX - get SAP length and address length as well, for use
** when sending packets.
*/
if (dlinforeq(p->fd, ebuf) < 0 ||
dlinfoack(p->fd, (char *)buf, ebuf) < 0)
goto bad;
infop = &((union DL_primitives *)buf)->info_ack;
switch (infop->dl_mac_type) {
case DL_CSMACD:
case DL_ETHER:
p->linktype = DLT_EN10MB;
p->offset = 2;
/*
* This is (presumably) a real Ethernet capture; give it a
* link-layer-type list with DLT_EN10MB and DLT_DOCSIS, so
* that an application can let you choose it, in case you're
* capturing DOCSIS traffic that a Cisco Cable Modem
* Termination System is putting out onto an Ethernet (it
* doesn't put an Ethernet header onto the wire, it puts raw
* DOCSIS frames out on the wire inside the low-level
* Ethernet framing).
*/
p->dlt_list = (u_int *) malloc(sizeof(u_int) * 2);
/*
* If that fails, just leave the list empty.
*/
if (p->dlt_list != NULL) {
p->dlt_list[0] = DLT_EN10MB;
p->dlt_list[1] = DLT_DOCSIS;
p->dlt_count = 2;
}
break;
case DL_FDDI:
p->linktype = DLT_FDDI;
p->offset = 3;
break;
case DL_TPR:
/*
* XXX - what about DL_TPB? Is that Token Bus?
*/
p->linktype = DLT_IEEE802;
p->offset = 2;
break;
#ifdef HAVE_SOLARIS
case DL_IPATM:
p->linktype = DLT_SUNATM;
p->offset = 0; /* works for LANE and LLC encapsulation */
break;
#endif
default:
snprintf(ebuf, PCAP_ERRBUF_SIZE, "unknown mac type %lu",
(unsigned long)infop->dl_mac_type);
goto bad;
}
#ifdef DLIOCRAW
/*
** This is a non standard SunOS hack to get the full raw link-layer
** header.
*/
if (strioctl(p->fd, DLIOCRAW, 0, NULL) < 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "DLIOCRAW: %s",
pcap_strerror(errno));
goto bad;
}
#endif
#ifdef HAVE_SYS_BUFMOD_H
/*
** Another non standard call to get the data nicely buffered
*/
if (ioctl(p->fd, I_PUSH, "bufmod") != 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "I_PUSH bufmod: %s",
pcap_strerror(errno));
goto bad;
}
/*
** Now that the bufmod is pushed lets configure it.
**
** There is a bug in bufmod(7). When dealing with messages of
** less than snaplen size it strips data from the beginning not
** the end.
**
** This bug is supposed to be fixed in 5.3.2. Also, there is a
** patch available. Ask for bugid 1149065.
*/
ss = snaplen;
#ifdef HAVE_SOLARIS
release = get_release(&osmajor, &osminor, &osmicro);
if (osmajor == 5 && (osminor <= 2 || (osminor == 3 && osmicro < 2)) &&
getenv("BUFMOD_FIXED") == NULL) {
fprintf(stderr,
"WARNING: bufmod is broken in SunOS %s; ignoring snaplen.\n",
release);
ss = 0;
}
#endif
if (ss > 0 &&
strioctl(p->fd, SBIOCSSNAP, sizeof(ss), (char *)&ss) != 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSSNAP: %s",
pcap_strerror(errno));
goto bad;
}
/*
** Set up the bufmod timeout
*/
if (to_ms != 0) {
struct timeval to;
to.tv_sec = to_ms / 1000;
to.tv_usec = (to_ms * 1000) % 1000000;
if (strioctl(p->fd, SBIOCSTIME, sizeof(to), (char *)&to) != 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSTIME: %s",
pcap_strerror(errno));
goto bad;
}
}
/*
** Set the chunk length.
*/
chunksize = CHUNKSIZE;
if (strioctl(p->fd, SBIOCSCHUNK, sizeof(chunksize), (char *)&chunksize)
!= 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSCHUNKP: %s",
pcap_strerror(errno));
goto bad;
}
#endif
/*
** As the last operation flush the read side.
*/
if (ioctl(p->fd, I_FLUSH, FLUSHR) != 0) {
snprintf(ebuf, PCAP_ERRBUF_SIZE, "FLUSHR: %s",
pcap_strerror(errno));
goto bad;
}
/* Allocate data buffer */
p->bufsize = PKTBUFSIZE;
p->buffer = (u_char *)malloc(p->bufsize + p->offset);
if (p->buffer == NULL) {
strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
goto bad;
}
/*
* "p->fd" is an FD for a STREAMS device, so "select()" and
* "poll()" should work on it.
*/
p->selectable_fd = p->fd;
p->read_op = pcap_read_dlpi;
p->inject_op = pcap_inject_dlpi;
p->setfilter_op = install_bpf_program; /* no kernel filtering */
p->setdirection_op = NULL; /* Not implemented.*/
p->set_datalink_op = NULL; /* can't change data link type */
p->getnonblock_op = pcap_getnonblock_fd;
p->setnonblock_op = pcap_setnonblock_fd;
p->stats_op = pcap_stats_dlpi;
p->close_op = pcap_close_dlpi;
return (p);
bad:
if (p->fd >= 0)
close(p->fd);
if (p->send_fd >= 0)
close(p->send_fd);
/*
* Get rid of any link-layer type list we allocated.
*/
if (p->dlt_list != NULL)
free(p->dlt_list);
free(p);
return (NULL);
}
void show_orgs()
{
struct organism *org;
int i, j, num=1, total, x, y, lastnumcells=0, last;
char key;
char string[110];
fg_box_t nbox, xbox, lbox, blankbox, topbox, cellbox, itembox;
fg_msm_cursor_t arrow = {arrow_matrix,{0,0,7,14}, 0, 14};
unsigned int status, last_status;
fg_coord_t xx, yy;
int stop=0, response;
fg_color_t pcols[10] = {2,3,4,5,6,9,10,12,13,14};
nbox [FG_X1] = 0;
nbox [FG_Y1] = 581;
nbox [FG_X2] = 98;
nbox [FG_Y2] = 597;
lbox [FG_X1] = 0;
lbox [FG_Y1] = 561;
lbox [FG_X2] = 98;
lbox [FG_Y2] = 577;
xbox [FG_X1] = 0;
xbox [FG_Y1] = 541;
xbox [FG_X2] = 98;
xbox [FG_Y2] = 557;
topbox[FG_X1] = 100;
topbox[FG_X2] = 799;
topbox[FG_Y1] = 541;
topbox[FG_Y2] = 597;
blankbox[FG_X1] = 0;
blankbox[FG_X2] = 394;
cellbox[FG_Y1]=400;
cellbox[FG_Y2]=420;
cellbox[FG_X1]=100;
cellbox[FG_X2]=140;
fg_msm_setcursor(arrow);
fg_msm_motion(0);
fg_msm_setcurpos(fg_box_width(fg_displaybox)/2, fg_box_height(fg_displaybox)/2);
fg_msm_showcursor();
fg_fillbox(FG_BLUE, FG_MODE_SET, ~0, nbox);
fg_fillbox(FG_BLUE, FG_MODE_SET, ~0, lbox);
fg_fillbox(FG_RED, FG_MODE_SET, ~0, xbox);
fg_drawbox(FG_LIGHT_BLUE,FG_MODE_SET,~0,FG_LINE_SOLID,nbox,fg.displaybox);
fg_drawbox(FG_LIGHT_BLUE,FG_MODE_SET,~0,FG_LINE_SOLID,lbox,fg.displaybox);
fg_drawbox(FG_LIGHT_RED,FG_MODE_SET,~0,FG_LINE_SOLID,xbox,fg.displaybox);
fg_puts(FG_WHITE, FG_MODE_SET, ~0, FG_ROT0, 10, 582, "NEXT", fg.displaybox);
fg_puts(FG_WHITE, FG_MODE_SET, ~0, FG_ROT0, 10, 562, "LAST", fg.displaybox);
fg_puts(FG_WHITE, FG_MODE_SET, ~0, FG_ROT0, 10, 542, "EXIT", fg.displaybox);
sprintf(string," CYCLES: %8.0f",cycles);
fg_puts(FG_WHITE, FG_MODE_SET, ~0, FG_ROT0, 550, 580, string,fg.displaybox);
sprintf(string,"POPULATION: %8d",numorgs);
fg_puts(FG_WHITE, FG_MODE_SET, ~0, FG_ROT0, 550, 565, string,fg.displaybox);
sprintf(string," SPAWNED: %8.0f", numspawned);
fg_puts(FG_WHITE, FG_MODE_SET, ~0, FG_ROT0, 550, 550, string,fg.displaybox);
fg_drawbox(FG_BLUE,FG_MODE_SET,~0,FG_LINE_SOLID,topbox,fg.displaybox);
show_colour_table();
show_inputs();
itembox[FG_Y1]=400;
itembox[FG_Y2]=420;
itembox[FG_X1]=0;
itembox[FG_X2]=98;
org = root;
while(!stop){
if(lastnumcells>org->numcells){
blankbox[FG_Y1]=420-(lastnumcells*22);
blankbox[FG_Y2]=420-(org->numcells*22);
fg_fillbox(FG_BLACK,FG_MODE_SET,~0,blankbox);
}
lastnumcells = org->numcells;
itembox[FG_Y1]=400;
itembox[FG_Y2]=420;
show_bug_details(org, num);
for(i=0;i<org->numcells;i++){
sprintf(string,"Cell: %2d",i+1);
fg_puts(FG_WHITE,FG_MODE_SET,~0,FG_ROT0,cellbox[FG_X1]-80,cellbox[FG_Y1]+3,string,fg.displaybox);
fg_drawbox(FG_BLUE,FG_MODE_SET,~0,FG_LINE_SOLID,itembox,fg.displaybox);
itembox[FG_Y1]-=22;
itembox[FG_Y2]-=22;
for(j=0;j<NUMINPUTS;j++){
fg_fillbox(pcols[org->cells[i]->inout[j]],FG_MODE_SET,~0,cellbox);
sprintf(string,"%2d",org->cells[i]->next[j]+1);
fg_puts(FG_BLACK,FG_MODE_SET,~0,FG_ROT0,cellbox[FG_X1]+10,cellbox[FG_Y1]+3,string,fg.displaybox);
cellbox[FG_X1]+=42;
cellbox[FG_X2]+=42;
}
cellbox[FG_X1]=100;
cellbox[FG_X2]=140;
cellbox[FG_Y1]-=22;
cellbox[FG_Y2]-=22;
}
cellbox[FG_Y1]=400;
cellbox[FG_Y2]=420;
response=0;
while(!response){
fg_flush();
last_status = status;
status = fg_msm_getstatus(&xx, &yy);
if(kbhit()) key = getch();
if((key == 'n')||((fg_pt_inbox(nbox, xx, yy))&&(status == FG_MSM_LEFT))) {
get_release(FG_WHITE,10,582,"NEXT");
org = org->next;
if(org==NULL){
org = root;
num = 0;
}
response++;
num++;
key = 'w';
}
else if((key == 'l')||((fg_pt_inbox(lbox, xx, yy))&&(status == FG_MSM_LEFT))) {
get_release(FG_WHITE,10,562,"LAST");
last = num-1;
if(last < 1){
while(org->next!=NULL){
org = org->next;
num++;
}
}
else {
org = root;
num = 1;
while(num!=last){
org = org->next;
num++;
}
}
response++;
key = 'w';
}
else if((key == 'x')||((fg_pt_inbox(xbox, xx, yy))&&(status == FG_MSM_LEFT))){
get_release(FG_WHITE,10,542,"EXIT");
stop++;
key = 'w';
response++;
}
}
}
fg_msm_hidecursor();
}
pcap_t *
pcap_open_live(char *device, int snaplen, int promisc, int to_ms, char *ebuf)
{
register char *cp;
char *eos;
register pcap_t *p;
register int ppa;
register dl_info_ack_t *infop;
#ifdef HAVE_SYS_BUFMOD_H
bpf_u_int32 ss, flag;
#ifdef HAVE_SOLARIS
register char *release;
bpf_u_int32 osmajor, osminor, osmicro;
#endif
#endif
bpf_u_int32 buf[MAXDLBUF];
char dname[100];
#ifndef HAVE_DEV_DLPI
char dname2[100];
#endif
p = (pcap_t *)malloc(sizeof(*p));
if (p == NULL) {
strcpy(ebuf, pcap_strerror(errno));
return (NULL);
}
memset(p, 0, sizeof(*p));
/*
** Determine device and ppa
*/
cp = strpbrk(device, "0123456789");
if (cp == NULL) {
sprintf(ebuf, "%s missing unit number", device);
goto bad;
}
ppa = strtol(cp, &eos, 10);
if (*eos != '\0') {
sprintf(ebuf, "%s bad unit number", device);
goto bad;
}
if (*device == '/')
strcpy(dname, device);
else
sprintf(dname, "%s/%s", PCAP_DEV_PREFIX, device);
#ifdef HAVE_DEV_DLPI
/* Map network device to /dev/dlpi unit */
cp = "/dev/dlpi";
if ((p->fd = open(cp, O_RDWR)) < 0) {
sprintf(ebuf, "%s: %s", cp, pcap_strerror(errno));
goto bad;
}
/* Map network interface to /dev/dlpi unit */
ppa = get_dlpi_ppa(p->fd, dname, ppa, ebuf);
if (ppa < 0)
goto bad;
#else
/* Try device without unit number */
strcpy(dname2, dname);
cp = strchr(dname, *cp);
*cp = '\0';
if ((p->fd = open(dname, O_RDWR)) < 0) {
if (errno != ENOENT) {
sprintf(ebuf, "%s: %s", dname, pcap_strerror(errno));
goto bad;
}
/* Try again with unit number */
if ((p->fd = open(dname2, O_RDWR)) < 0) {
sprintf(ebuf, "%s: %s", dname2, pcap_strerror(errno));
goto bad;
}
/* XXX Assume unit zero */
ppa = 0;
}
#endif
p->snapshot = snaplen;
/*
** Attach if "style 2" provider
*/
if (dlinforeq(p->fd, ebuf) < 0 ||
dlinfoack(p->fd, (char *)buf, ebuf) < 0)
goto bad;
infop = &((union DL_primitives *)buf)->info_ack;
if (infop->dl_provider_style == DL_STYLE2 &&
(dlattachreq(p->fd, ppa, ebuf) < 0 ||
dlokack(p->fd, "attach", (char *)buf, ebuf) < 0))
goto bad;
/*
** Bind (defer if using HP-UX 9 or HP-UX 10.20, totally skip if
** using SINIX)
*/
#if !defined(HAVE_HPUX9) && !defined(HAVE_HPUX10_20) && !defined(sinix)
if (dlbindreq(p->fd, 0, ebuf) < 0 ||
dlbindack(p->fd, (char *)buf, ebuf) < 0)
goto bad;
#endif
if (promisc) {
/*
** Enable promiscuous
*/
if (dlpromisconreq(p->fd, DL_PROMISC_PHYS, ebuf) < 0 ||
dlokack(p->fd, "promisc_phys", (char *)buf, ebuf) < 0)
goto bad;
/*
** Try to enable multicast (you would have thought
** promiscuous would be sufficient). (Skip if using
** HP-UX or SINIX)
*/
#if !defined(__hpux) && !defined(sinix)
if (dlpromisconreq(p->fd, DL_PROMISC_MULTI, ebuf) < 0 ||
dlokack(p->fd, "promisc_multi", (char *)buf, ebuf) < 0)
fprintf(stderr,
"WARNING: DL_PROMISC_MULTI failed (%s)\n", ebuf);
#endif
}
/*
** Try to enable sap (when not in promiscuous mode when using
** using HP-UX and never under SINIX)
*/
#ifndef sinix
if (
#ifdef __hpux
!promisc &&
#endif
(dlpromisconreq(p->fd, DL_PROMISC_SAP, ebuf) < 0 ||
dlokack(p->fd, "promisc_sap", (char *)buf, ebuf) < 0)) {
/* Not fatal if promisc since the DL_PROMISC_PHYS worked */
if (promisc)
fprintf(stderr,
"WARNING: DL_PROMISC_SAP failed (%s)\n", ebuf);
else
goto bad;
}
#endif
/*
** HP-UX 9 and HP-UX 10.20 must bind after setting promiscuous
** options)
*/
#if defined(HAVE_HPUX9) || defined(HAVE_HPUX10_20)
if (dlbindreq(p->fd, 0, ebuf) < 0 ||
dlbindack(p->fd, (char *)buf, ebuf) < 0)
goto bad;
#endif
/*
** Determine link type
*/
if (dlinforeq(p->fd, ebuf) < 0 ||
dlinfoack(p->fd, (char *)buf, ebuf) < 0)
goto bad;
infop = &((union DL_primitives *)buf)->info_ack;
switch (infop->dl_mac_type) {
case DL_CSMACD:
case DL_ETHER:
p->linktype = DLT_EN10MB;
p->offset = 2;
break;
case DL_FDDI:
p->linktype = DLT_FDDI;
p->offset = 3;
break;
default:
sprintf(ebuf, "unknown mac type 0x%lu", infop->dl_mac_type);
goto bad;
}
#ifdef DLIOCRAW
/*
** This is a non standard SunOS hack to get the ethernet header.
*/
if (strioctl(p->fd, DLIOCRAW, 0, NULL) < 0) {
sprintf(ebuf, "DLIOCRAW: %s", pcap_strerror(errno));
goto bad;
}
#endif
#ifdef HAVE_SYS_BUFMOD_H
/*
** Another non standard call to get the data nicely buffered
*/
if (ioctl(p->fd, I_PUSH, "bufmod") != 0) {
sprintf(ebuf, "I_PUSH bufmod: %s", pcap_strerror(errno));
goto bad;
}
/*
** Now that the bufmod is pushed lets configure it.
**
** There is a bug in bufmod(7). When dealing with messages of
** less than snaplen size it strips data from the beginning not
** the end.
**
** This bug is supposed to be fixed in 5.3.2. Also, there is a
** patch available. Ask for bugid 1149065.
*/
ss = snaplen;
#ifdef HAVE_SOLARIS
release = get_release(&osmajor, &osminor, &osmicro);
if (osmajor == 5 && (osminor <= 2 || (osminor == 3 && osmicro < 2)) &&
getenv("BUFMOD_FIXED") == NULL) {
fprintf(stderr,
"WARNING: bufmod is broken in SunOS %s; ignoring snaplen.\n",
release);
ss = 0;
}
#endif
if (ss > 0 &&
strioctl(p->fd, SBIOCSSNAP, sizeof(ss), (char *)&ss) != 0) {
sprintf(ebuf, "SBIOCSSNAP: %s", pcap_strerror(errno));
goto bad;
}
/*
** Set up the bufmod flags
*/
if (strioctl(p->fd, SBIOCGFLAGS, sizeof(flag), (char *)&flag) < 0) {
sprintf(ebuf, "SBIOCGFLAGS: %s", pcap_strerror(errno));
goto bad;
}
flag |= SB_NO_DROPS;
if (strioctl(p->fd, SBIOCSFLAGS, sizeof(flag), (char *)&flag) != 0) {
sprintf(ebuf, "SBIOCSFLAGS: %s", pcap_strerror(errno));
goto bad;
}
/*
** Set up the bufmod timeout
*/
if (to_ms != 0) {
struct timeval to;
to.tv_sec = to_ms / 1000;
to.tv_usec = (to_ms * 1000) % 1000000;
if (strioctl(p->fd, SBIOCSTIME, sizeof(to), (char *)&to) != 0) {
sprintf(ebuf, "SBIOCSTIME: %s", pcap_strerror(errno));
goto bad;
}
}
#endif
/*
** As the last operation flush the read side.
*/
if (ioctl(p->fd, I_FLUSH, FLUSHR) != 0) {
sprintf(ebuf, "FLUSHR: %s", pcap_strerror(errno));
goto bad;
}
/* Allocate data buffer */
p->bufsize = MAXDLBUF * sizeof(bpf_u_int32);
p->buffer = (u_char *)malloc(p->bufsize + p->offset);
return (p);
bad:
free(p);
return (NULL);
}
AudioProcessorState *
AudioProcessor::get_state(vtime_t time)
{
AudioProcessorState *state = new AudioProcessorState;
if (!state) return 0;
// Channel order
get_input_order(state->input_order);
get_output_order(state->output_order);
// Master gain
state->master = get_master();
state->gain = get_gain();
// AGC options
state->auto_gain = get_auto_gain();
state->normalize = get_normalize();
state->attack = get_attack();
state->release = get_release();
// DRC
state->drc = get_drc();
state->drc_power = get_drc_power();
state->drc_level = get_drc_level();
// Matrix
get_matrix(state->matrix);
// Automatrix options
state->auto_matrix = get_auto_matrix();
state->normalize_matrix = get_normalize_matrix();
state->voice_control = get_voice_control();
state->expand_stereo = get_expand_stereo();
// Automatrix levels
state->clev = get_clev();
state->slev = get_slev();
state->lfelev = get_lfelev();
// Input/output gains
get_input_gains(state->input_gains);
get_output_gains(state->output_gains);
// Input/output levels
get_input_levels(time, state->input_levels);
get_output_levels(time, state->output_levels);
// SRC
state->src_quality = get_src_quality();
state->src_att = get_src_att();
// Equalizer
state->eq = get_eq();
state->eq_master_nbands = get_eq_nbands(CH_NONE);
state->eq_master_bands = 0;
if (state->eq_master_nbands)
{
state->eq_master_bands = new EqBand[state->eq_master_nbands];
get_eq_bands(CH_NONE, state->eq_master_bands, 0, state->eq_master_nbands);
}
for (int ch_name = 0; ch_name < CH_NAMES; ch_name++)
{
state->eq_nbands[ch_name] = get_eq_nbands(ch_name);
state->eq_bands[ch_name] = 0;
if (state->eq_nbands[ch_name])
{
state->eq_bands[ch_name] = new EqBand[state->eq_nbands[ch_name]];
get_eq_bands(ch_name, state->eq_bands[ch_name], 0, state->eq_nbands[ch_name]);
}
}
// Bass redirection
state->bass_redir = get_bass_redir();
state->bass_freq = get_bass_freq();
state->bass_channels = get_bass_channels();
// Delays
state->delay = get_delay();
state->delay_units = get_delay_units();
get_delays(state->delays);
// Dithering
state->dithering = get_dithering();
return state;
}
static int find_releases(void) {
int nbr_suites = sizeof(suites)/SUITE_LENGTH;
int i, r = 0;
int bad_mirror = 0, have_default = 0;
struct release_t release;
char *default_suite;
default_suite = get_default_suite();
if (default_suite == NULL)
di_log(DI_LOG_LEVEL_ERROR, "no default release specified");
if (show_progress) {
debconf_progress_start(debconf, 0, nbr_suites,
DEBCONF_BASE "checking_title");
debconf_progress_info(debconf,
DEBCONF_BASE "checking_download");
}
/* Initialize releases; also ensures NULL termination of the array */
memset(&releases, 0, sizeof(releases));
/* Try to get Release files for all suites. */
if (! base_on_cd) {
for (i=0; i < nbr_suites && r < MAXRELEASES; i++) {
memset(&release, 0, sizeof(release));
if (get_release(&release, suites[i])) {
if (release.status & IS_VALID) {
if (strcmp(release.name, default_suite) == 0 ||
strcmp(release.suite, default_suite) == 0) {
release.status |= IS_DEFAULT;
have_default = 1;
}
/* Only list oldstable if it's the default */
if (strcmp(suites[i], "oldstable") != 0 ||
(release.status & IS_DEFAULT))
releases[r++] = release;
} else {
bad_mirror = 1;
break;
}
}
if (show_progress)
debconf_progress_step(debconf, 1);
}
if (r == MAXRELEASES)
di_log(DI_LOG_LEVEL_ERROR, "array overflow: more releases than allowed by MAXRELEASES");
if (! bad_mirror && r == 0)
di_log(DI_LOG_LEVEL_INFO, "mirror does not have any suite symlinks");
}
/* Try to get Release file using the default "suite". */
if (! bad_mirror && (base_on_cd || ! have_default)) {
memset(&release, 0, sizeof(release));
if (get_release(&release, default_suite)) {
if (release.status & IS_VALID) {
release.status |= IS_DEFAULT;
releases[r++] = release;
have_default = 1;
} else {
bad_mirror = 1;
}
} else {
di_log(DI_LOG_LEVEL_WARNING,
"mirror does not support the specified release (%s)",
default_suite);
}
if (r == MAXRELEASES)
di_log(DI_LOG_LEVEL_ERROR, "array overflow: more releases than allowed by MAXRELEASES");
}
if (show_progress) {
debconf_progress_set(debconf, nbr_suites);
debconf_progress_stop(debconf);
}
if (r == 0 || bad_mirror) {
unset_seen_flags();
free(default_suite);
free(release.name);
free(release.suite);
debconf_input(debconf, "critical", DEBCONF_BASE "bad");
if (debconf_go(debconf) == 30)
exit(10); /* back up to menu */
else
return 1; /* back to beginning of questions */
}
if (! base_on_cd && ! have_default) {
unset_seen_flags();
debconf_subst(debconf, DEBCONF_BASE "no-default",
"RELEASE", default_suite);
free(default_suite);
debconf_input(debconf, "critical", DEBCONF_BASE "no-default");
if (debconf_go(debconf) == 30) {
exit(10); /* back up to menu */
} else {
debconf_get(debconf, DEBCONF_BASE "no-default");
if (strcmp(debconf->value, "false"))
return 1; /* back to beginning of questions */
}
} else {
free(default_suite);
}
return 0;
}