/// Make sure win->w_cursor.col is valid. Special handling of insert-mode.
/// @see mb_check_adjust_col
void check_cursor_col_win(win_T *win)
{
colnr_T len;
colnr_T oldcol = win->w_cursor.col;
colnr_T oldcoladd = win->w_cursor.col + win->w_cursor.coladd;
len = (colnr_T)STRLEN(ml_get_buf(win->w_buffer, win->w_cursor.lnum, false));
if (len == 0) {
win->w_cursor.col = 0;
} else if (win->w_cursor.col >= len) {
/* Allow cursor past end-of-line when:
* - in Insert mode or restarting Insert mode
* - in Visual mode and 'selection' isn't "old"
* - 'virtualedit' is set */
if ((State & INSERT) || restart_edit
|| (VIsual_active && *p_sel != 'o')
|| (ve_flags & VE_ONEMORE)
|| virtual_active()) {
win->w_cursor.col = len;
} else {
win->w_cursor.col = len - 1;
// Move the cursor to the head byte.
if (has_mbyte) {
mark_mb_adjustpos(win->w_buffer, &win->w_cursor);
}
}
} else if (win->w_cursor.col < 0) {
win->w_cursor.col = 0;
}
// If virtual editing is on, we can leave the cursor on the old position,
// only we must set it to virtual. But don't do it when at the end of the
// line.
if (oldcol == MAXCOL) {
win->w_cursor.coladd = 0;
} else if (ve_flags == VE_ALL) {
if (oldcoladd > win->w_cursor.col) {
win->w_cursor.coladd = oldcoladd - win->w_cursor.col;
// Make sure that coladd is not more than the char width.
// Not for the last character, coladd is then used when the cursor
// is actually after the last character.
if (win->w_cursor.col + 1 < len && win->w_cursor.coladd > 0) {
int cs, ce;
getvcol(win, &win->w_cursor, &cs, NULL, &ce);
if (win->w_cursor.coladd > ce - cs) {
win->w_cursor.coladd = ce - cs;
}
}
} else {
// avoid weird number when there is a miscalculation or overflow
win->w_cursor.coladd = 0;
}
}
}
// Return the indent of the current line after a number. Return -1 if no
// number was found. Used for 'n' in 'formatoptions': numbered list.
// Since a pattern is used it can actually handle more than numbers.
int get_number_indent(linenr_T lnum)
{
colnr_T col;
pos_T pos;
regmatch_T regmatch;
int lead_len = 0; // Length of comment leader.
if (lnum > curbuf->b_ml.ml_line_count) {
return -1;
}
pos.lnum = 0;
// In format_lines() (i.e. not insert mode), fo+=q is needed too...
if ((State & INSERT) || has_format_option(FO_Q_COMS)) {
lead_len = get_leader_len(ml_get(lnum), NULL, false, true);
}
regmatch.regprog = vim_regcomp(curbuf->b_p_flp, RE_MAGIC);
if (regmatch.regprog != NULL) {
regmatch.rm_ic = false;
// vim_regexec() expects a pointer to a line. This lets us
// start matching for the flp beyond any comment leader...
if (vim_regexec(®match, ml_get(lnum) + lead_len, (colnr_T)0)) {
pos.lnum = lnum;
pos.col = (colnr_T)(*regmatch.endp - ml_get(lnum));
pos.coladd = 0;
}
vim_regfree(regmatch.regprog);
}
if ((pos.lnum == 0) || (*ml_get_pos(&pos) == '\0')) {
return -1;
}
getvcol(curwin, &pos, &col, NULL, NULL);
return (int)col;
}
static int coladvance2(
pos_T *pos,
bool addspaces, /* change the text to achieve our goal? */
bool finetune, /* change char offset for the exact column */
colnr_T wcol /* column to move to */
)
{
int idx;
char_u *ptr;
char_u *line;
colnr_T col = 0;
int csize = 0;
int one_more;
int head = 0;
one_more = (State & INSERT)
|| restart_edit != NUL
|| (VIsual_active && *p_sel != 'o')
|| ((ve_flags & VE_ONEMORE) && wcol < MAXCOL);
line = ml_get_buf(curbuf, pos->lnum, false);
if (wcol >= MAXCOL) {
idx = (int)STRLEN(line) - 1 + one_more;
col = wcol;
if ((addspaces || finetune) && !VIsual_active) {
curwin->w_curswant = linetabsize(line) + one_more;
if (curwin->w_curswant > 0)
--curwin->w_curswant;
}
} else {
int width = curwin->w_width - win_col_off(curwin);
if (finetune
&& curwin->w_p_wrap
&& curwin->w_width != 0
&& wcol >= (colnr_T)width) {
csize = linetabsize(line);
if (csize > 0)
csize--;
if (wcol / width > (colnr_T)csize / width
&& ((State & INSERT) == 0 || (int)wcol > csize + 1)) {
/* In case of line wrapping don't move the cursor beyond the
* right screen edge. In Insert mode allow going just beyond
* the last character (like what happens when typing and
* reaching the right window edge). */
wcol = (csize / width + 1) * width - 1;
}
}
ptr = line;
while (col <= wcol && *ptr != NUL) {
/* Count a tab for what it's worth (if list mode not on) */
csize = win_lbr_chartabsize(curwin, line, ptr, col, &head);
MB_PTR_ADV(ptr);
col += csize;
}
idx = (int)(ptr - line);
/*
* Handle all the special cases. The virtual_active() check
* is needed to ensure that a virtual position off the end of
* a line has the correct indexing. The one_more comparison
* replaces an explicit add of one_more later on.
*/
if (col > wcol || (!virtual_active() && one_more == 0)) {
idx -= 1;
/* Don't count the chars from 'showbreak'. */
csize -= head;
col -= csize;
}
if (virtual_active()
&& addspaces
&& ((col != wcol && col != wcol + 1) || csize > 1)) {
/* 'virtualedit' is set: The difference between wcol and col is
* filled with spaces. */
if (line[idx] == NUL) {
/* Append spaces */
int correct = wcol - col;
char_u *newline = xmallocz((size_t)(idx + correct));
memcpy(newline, line, (size_t)idx);
memset(newline + idx, ' ', (size_t)correct);
ml_replace(pos->lnum, newline, false);
changed_bytes(pos->lnum, (colnr_T)idx);
idx += correct;
col = wcol;
} else {
/* Break a tab */
int linelen = (int)STRLEN(line);
int correct = wcol - col - csize + 1; /* negative!! */
char_u *newline;
if (-correct > csize)
return FAIL;
newline = xmallocz((size_t)(linelen - 1 + csize));
// Copy first idx chars
memcpy(newline, line, (size_t)idx);
// Replace idx'th char with csize spaces
memset(newline + idx, ' ', (size_t)csize);
// Copy the rest of the line
memcpy(newline + idx + csize, line + idx + 1,
(size_t)(linelen - idx - 1));
ml_replace(pos->lnum, newline, false);
changed_bytes(pos->lnum, idx);
idx += (csize - 1 + correct);
col += correct;
}
}
}
if (idx < 0)
pos->col = 0;
else
pos->col = idx;
pos->coladd = 0;
if (finetune) {
if (wcol == MAXCOL) {
/* The width of the last character is used to set coladd. */
if (!one_more) {
colnr_T scol, ecol;
getvcol(curwin, pos, &scol, NULL, &ecol);
pos->coladd = ecol - scol;
}
} else {
int b = (int)wcol - (int)col;
/* The difference between wcol and col is used to set coladd. */
if (b > 0 && b < (MAXCOL - 2 * curwin->w_width))
pos->coladd = b;
col += b;
}
}
// Prevent from moving onto a trail byte.
if (has_mbyte) {
mark_mb_adjustpos(curbuf, pos);
}
if (col < wcol)
return FAIL;
return OK;
}
void
normal()
{
register u_char c;
long n;
int flag = FALSE;
int type = 0; /* used in some operations to modify type */
int dir = FORWARD; /* search direction */
u_char nchar = NUL;
int finish_op;
linenr_t Prenum1;
char searchbuff[CMDBUFFSIZE]; /* buffer for search string */
FPOS *pos;
register char *ptr;
int command_busy = FALSE;
static linenr_t redo_Quote_nlines;
static int redo_Quote_type;
static long redo_Quote_col;
Prenum = 0;
/*
* If there is an operator pending, then the command we take this time
* will terminate it. Finish_op tells us to finish the operation before
* returning this time (unless the operation was cancelled).
*/
finish_op = (operator != NOP);
if (!finish_op && !yankbuffer)
opnum = 0;
if (vpeekc() == NUL || KeyTyped == TRUE)
premsg(NUL, NUL);
State = NORMAL_BUSY;
c = vgetc();
/* Pick up any leading digits and compute 'Prenum' */
while ((c >= '1' && c <= '9') || (Prenum > 0 && (c == DEL || c == '0')))
{
if (c == DEL)
Prenum /= 10;
else
Prenum = Prenum * 10 + (c - '0');
premsg(' ', NUL);
c = vgetc();
}
/*
* If we're in the middle of an operator (including after entering a yank
* buffer with ") AND we had a count before the
* operator, then that count overrides the current value of Prenum. What
* this means effectively, is that commands like "3dw" get turned into
* "d3w" which makes things fall into place pretty neatly.
* If you give a count before AND after the operator, they are multiplied.
*/
if (opnum != 0)
{
if (Prenum)
Prenum *= opnum;
else
Prenum = opnum;
opnum = 0;
}
Prenum1 = (Prenum == 0 ? 1 : Prenum); /* Prenum often defaults to 1 */
premsg(c, NUL);
/*
* get an additional character if we need one
*/
if (strchr("@zZtTfF[]rm'`\"", c) || (c == 'v' && Recording == FALSE))
{
State = NOMAPPING;
nchar = vgetc(); /* no macro mapping for this char */
premsg(c, nchar);
}
flushbuf(); /* flush the premsg() characters onto the screen so we can
see them while the command is being executed */
if (c != 'z') /* the 'z' command gets another character */
{
State = NORMAL;
script_winsize_pp();
}
if (nchar == ESC)
{
CLEAROP;
goto normal_end;
}
switch (c)
{
/*
* 0: Macros
*/
case 'v': /* (stop) recording into a named buffer */
CHECKCLEAROP;
if (!dorecord(nchar))
CLEAROPBEEP;
break;
case '@': /* execute a named buffer */
CHECKCLEAROP;
while (Prenum1--)
if (!doexecbuf(nchar))
{
CLEAROPBEEP;
break;
}
break;
/*
* 1: Screen positioning commands
*/
case CTRL('D'):
flag = TRUE;
case CTRL('U'):
CHECKCLEAROP;
if (Prenum)
p_scroll = (Prenum > Rows - 1) ? Rows - 1 : Prenum;
n = (p_scroll < Rows) ? p_scroll : Rows - 1;
if (flag)
{
scrollup(n);
onedown(n);
}
else
{
scrolldown(n);
oneup(n);
}
updateScreen(VALID);
break;
case CTRL('B'):
case K_SUARROW:
dir = BACKWARD;
case CTRL('F'):
case K_SDARROW:
CHECKCLEAROP;
onepage(dir, Prenum1);
break;
case CTRL('E'):
CHECKCLEAROP;
scrollup(Prenum1);
updateScreen(VALID);
break;
case CTRL('Y'):
CHECKCLEAROP;
scrolldown(Prenum1);
updateScreen(VALID);
break;
case 'z':
CHECKCLEAROP;
if (isdigit(nchar))
{
/*
* we misuse some variables to be able to call premsg()
*/
operator = c;
opnum = Prenum;
Prenum = nchar - '0';
for (;;)
{
premsg(' ', NUL);
nchar = vgetc();
State = NORMAL;
script_winsize_pp();
if (nchar == DEL)
Prenum /= 10;
else if (isdigit(nchar))
Prenum = Prenum * 10 + (nchar - '0');
else if (nchar == CR)
{
set_winsize((int)Columns, (int)Prenum, TRUE);
break;
}
else
{
CLEAROPBEEP;
break;
}
}
operator = NOP;
break;
}
if (Prenum) /* line number given */
{
if (Prenum > line_count)
Curpos.lnum = line_count;
else
Curpos.lnum = Prenum;
}
State = NORMAL;
script_winsize_pp();
switch (nchar)
{
case NL: /* put Curpos at top of screen */
case CR:
Topline = Prenum;
updateScreen(VALID);
break;
case '.': /* put Curspos in middle of screen */
n = Rows / 2;
goto dozcmd;
case '-': /* put Curpos at bottom of screen */
n = Rows - 1;
/* FALLTHROUGH */
dozcmd:
{
register linenr_t lp = Prenum;
register long l = 0;
while ((l < n) && (lp != 0))
{
l += plines(lp);
Topline = lp;
--lp;
}
}
updateScreen(VALID);
break;
default:
CLEAROPBEEP;
}
break;
/*
* 2: Control commands
*/
case ':':
if (Quote.lnum)
goto dooperator;
CHECKCLEAROP;
docmdline(NULL);
break;
case K_HELP:
CHECKCLEAROP;
help();
break;
case CTRL('L'):
CHECKCLEAROP;
updateScreen(CLEAR);
break;
case CTRL('G'):
CHECKCLEAROP;
fileinfo();
break;
case K_CCIRCM: /* shorthand command */
CHECKCLEAROPQ;
if (getaltfile((int)Prenum, (linenr_t)0, TRUE))
emsg(e_noalt);
break;
case 'Z': /* write, if changed, and exit */
CHECKCLEAROPQ;
if (nchar != 'Z')
{
CLEAROPBEEP;
break;
}
stuffReadbuff(":x\n");
break;
case CTRL(']'): /* :ta to current identifier */
CHECKCLEAROPQ;
case '*': /* / to current identifier */
case '#': /* ? to current identifier */
case 'K': /* run program for current identifier */
{
register int col;
ptr = nr2ptr(Curpos.lnum);
col = Curpos.col;
/*
* skip to start of identifier.
*/
while (ptr[col] != NUL && !isidchar(ptr[col]))
++col;
/*
* Back up to start of identifier. This doesn't match the
* real vi but I like it a little better and it shouldn't bother
* anyone.
*/
while (col > 0 && isidchar(ptr[col - 1]))
--col;
if (!isidchar(ptr[col]))
{
CLEAROPBEEP;
break;
}
if (Prenum)
stuffnumReadbuff(Prenum);
switch (c)
{
case '*':
stuffReadbuff("/");
break;
case '#':
stuffReadbuff("?");
break;
case 'K':
stuffReadbuff(":! ");
stuffReadbuff(p_kp);
stuffReadbuff(" ");
break;
default:
stuffReadbuff(":ta ");
}
/*
* Now grab the chars in the identifier
*/
while (isidchar(ptr[col]))
{
stuffReadbuff(mkstr(ptr[col]));
++col;
}
stuffReadbuff("\n");
}
break;
case CTRL('T'): /* backwards in tag stack */
CHECKCLEAROPQ;
dotag("", 2, (int)Prenum1);
break;
/*
* Cursor motions
*/
case 'G':
mtype = MLINE;
setpcmark();
if (Prenum == 0 || Prenum > line_count)
Curpos.lnum = line_count;
else
Curpos.lnum = Prenum;
beginline(TRUE);
break;
case 'H':
case 'M':
if (c == 'M')
n = Rows / 2;
else
n = Prenum;
mtype = MLINE;
Curpos.lnum = Topline;
while (n && onedown((long)1))
--n;
beginline(TRUE);
break;
case 'L':
mtype = MLINE;
Curpos.lnum = Botline - 1;
for (n = Prenum; n && oneup((long)1); n--)
;
beginline(TRUE);
break;
case 'l':
case K_RARROW:
case ' ':
mtype = MCHAR;
mincl = FALSE;
n = Prenum1;
while (n--)
{
if (!oneright())
{
if (operator == NOP)
beep();
else
{
if (lineempty(Curpos.lnum))
CLEAROPBEEP;
else
{
mincl = TRUE;
if (n)
beep();
}
}
break;
}
}
set_want_col = TRUE;
break;
case 'h':
case K_LARROW:
case CTRL('H'):
case DEL:
mtype = MCHAR;
mincl = FALSE;
n = Prenum1;
while (n--)
{
if (!oneleft())
{
if (operator != DELETE && operator != CHANGE)
beep();
else if (Prenum1 == 1)
CLEAROPBEEP;
break;
}
}
set_want_col = TRUE;
break;
case '-':
flag = TRUE;
/* FALLTHROUGH */
case 'k':
case K_UARROW:
case CTRL('P'):
mtype = MLINE;
if (!oneup(Prenum1))
CLEAROPBEEP;
else if (flag)
beginline(TRUE);
break;
case '+':
case CR:
flag = TRUE;
/* FALLTHROUGH */
case 'j':
case K_DARROW:
case CTRL('N'):
case NL:
mtype = MLINE;
if (!onedown(Prenum1))
CLEAROPBEEP;
else if (flag)
beginline(TRUE);
break;
/*
* This is a strange motion command that helps make operators more
* logical. It is actually implemented, but not documented in the
* real 'vi'. This motion command actually refers to "the current
* line". Commands like "dd" and "yy" are really an alternate form of
* "d_" and "y_". It does accept a count, so "d3_" works to delete 3
* lines.
*/
case '_':
lineop:
mtype = MLINE;
if (!onedown((long)(Prenum1 - 1)))
CLEAROPBEEP;
else if (operator != YANK) /* 'Y' does not move cursor */
beginline(TRUE);
break;
case '|':
mtype = MCHAR;
mincl = TRUE;
beginline(FALSE);
if (Prenum > 0)
coladvance((colnr_t)(Prenum - 1));
Curswant = Prenum - 1;
break;
/*
* Word Motions
*/
case 'B':
type = 1;
/* FALLTHROUGH */
case 'b':
case K_SLARROW:
mtype = MCHAR;
mincl = FALSE;
set_want_col = TRUE;
if (bck_word(Prenum1, type))
CLEAROPBEEP;
break;
case 'E':
type = 1;
/* FALLTHROUGH */
case 'e':
mincl = TRUE;
goto dowrdcmd;
case 'W':
type = 1;
/* FALLTHROUGH */
case 'w':
case K_SRARROW:
mincl = FALSE;
flag = TRUE;
/*
* This is a little strange. To match what the real vi does, we
* effectively map 'cw' to 'ce', and 'cW' to 'cE', provided that we are
* not on a space or a TAB. This seems
* impolite at first, but it's really more what we mean when we say
* 'cw'.
*/
if (operator == CHANGE && (n = gcharCurpos()) != ' ' && n != TAB &&
n != NUL)
{
mincl = TRUE;
flag = FALSE;
}
dowrdcmd:
mtype = MCHAR;
set_want_col = TRUE;
if (flag)
n = fwd_word(Prenum1, type);
else
n = end_word(Prenum1, type, operator == CHANGE);
if (n)
{
CLEAROPBEEP;
break;
}
/*
* if we do a 'dw' for the last word in a line, we only delete the rest
* of the line, not joining the two lines.
*/
if (operator == DELETE && Prenum1 == 1 && startop.lnum != Curpos.lnum)
{
Curpos = startop;
while (oneright())
;
mincl = TRUE;
}
break;
case '$':
mtype = MCHAR;
mincl = TRUE;
Curswant = 29999; /* so we stay at the end */
if (!onedown((long)(Prenum1 - 1)))
{
CLEAROPBEEP;
break;
}
if (Quote_block)
updateScreen(NOT_VALID);
break;
case '^':
flag = TRUE;
/* FALLTHROUGH */
case '0':
mtype = MCHAR;
mincl = TRUE;
beginline(flag);
break;
/*
* 4: Searches
*/
case '?':
case '/':
if (!getcmdline(c, (u_char *)searchbuff))
{
CLEAROP;
break;
}
mtype = MCHAR;
mincl = FALSE;
set_want_col = TRUE;
n = dosearch(c == '/' ? FORWARD : BACKWARD, searchbuff, FALSE, Prenum1);
if (n == 0)
CLEAROPBEEP;
else if (n == 2)
mtype = MLINE;
break;
case 'N':
flag = 1;
case 'n':
mtype = MCHAR;
mincl = FALSE;
set_want_col = TRUE;
if (!dosearch(0, NULL, flag, Prenum1))
CLEAROPBEEP;
break;
/*
* Character searches
*/
case 'T':
dir = BACKWARD;
/* FALLTHROUGH */
case 't':
type = 1;
goto docsearch;
case 'F':
dir = BACKWARD;
/* FALLTHROUGH */
case 'f':
docsearch:
mtype = MCHAR;
mincl = TRUE;
set_want_col = TRUE;
if (!searchc(nchar, dir, type, Prenum1))
{
CLEAROPBEEP;
}
break;
case ',':
flag = 1;
/* FALLTHROUGH */
case ';':
dir = flag;
goto docsearch; /* nchar == NUL, thus repeat previous search */
/*
* section or C function searches
*/
case '[':
dir = BACKWARD;
/* FALLTHROUGH */
case ']':
mtype = MLINE;
set_want_col = TRUE;
flag = '{';
if (nchar != c)
{
if (nchar == '[' || nchar == ']')
flag = '}';
else
{
CLEAROPBEEP;
break;
}
}
if (dir == FORWARD && operator != NOP) /* e.g. y]] searches for '}' */
flag = '}';
if (!findpar(dir, Prenum1, flag))
{
CLEAROPBEEP;
}
break;
case '%':
mincl = TRUE;
if (Prenum) /* {cnt}% : goto {cnt} percentage in file */
{
if (Prenum > 100)
CLEAROPBEEP;
else
{
mtype = MLINE;
setpcmark();
Curpos.lnum = line_count * Prenum / 100;
Curpos.col = 0;
}
}
else /* % : go to matching paren */
{
mtype = MCHAR;
if ((pos = showmatch()) == NULL)
CLEAROPBEEP;
else
{
setpcmark();
Curpos = *pos;
set_want_col = TRUE;
}
}
break;
case '(':
dir = BACKWARD;
/* FALLTHROUGH */
case ')':
mtype = MCHAR;
if (c == ')')
mincl = FALSE;
else
mincl = TRUE;
set_want_col = TRUE;
if (!findsent(dir, Prenum1))
CLEAROPBEEP;
break;
case '{':
dir = BACKWARD;
/* FALLTHROUGH */
case '}':
mtype = MCHAR;
mincl = FALSE;
set_want_col = TRUE;
if (!findpar(dir, Prenum1, NUL))
CLEAROPBEEP;
break;
/*
* 5: Edits
*/
case '.':
CHECKCLEAROPQ;
if (!start_redo(Prenum))
CLEAROPBEEP;
break;
case 'u':
if (Quote.lnum)
goto dooperator;
case K_UNDO:
CHECKCLEAROPQ;
u_undo((int)Prenum1);
set_want_col = TRUE;
break;
case CTRL('R'):
CHECKCLEAROPQ;
u_redo((int)Prenum1);
set_want_col = TRUE;
break;
case 'U':
if (Quote.lnum)
goto dooperator;
CHECKCLEAROPQ;
u_undoline();
set_want_col = TRUE;
break;
case 'r':
if (Quote.lnum)
{
c = 'c';
goto dooperator;
}
CHECKCLEAROPQ;
n = strlen(nr2ptr(Curpos.lnum)) - Curpos.col;
if (n < Prenum1) /* not enough characters to replace */
{
CLEAROPBEEP;
break;
}
prep_redo(Prenum1, 'r', NUL, nchar);
stuffnumReadbuff(Prenum1);
stuffReadbuff("R");
stuffReadbuff(mkstr(nchar));
stuffReadbuff("\033");
break;
case 'J':
if (Quote.lnum) /* join the quoted lines */
{
if (Curpos.lnum > Quote.lnum)
{
Prenum = Curpos.lnum - Quote.lnum + 1;
Curpos.lnum = Quote.lnum;
}
else
Prenum = Quote.lnum - Curpos.lnum + 1;
Quote.lnum = 0;
}
CHECKCLEAROP;
if (Prenum <= 1)
Prenum = 2; /* default for join is two lines! */
if (Curpos.lnum + Prenum - 1 > line_count) /* beyond last line */
{
CLEAROPBEEP;
break;
}
prep_redo(Prenum, 'J', NUL, NUL);
dodojoin(Prenum, TRUE, TRUE);
break;
case 'P':
dir = BACKWARD;
/* FALLTHROUGH */
case 'p':
CHECKCLEAROPQ;
prep_redo(Prenum, c, NUL, NUL);
doput(dir, Prenum1);
break;
case CTRL('A'): /* add to number */
case CTRL('S'): /* subtract from number */
CHECKCLEAROPQ;
{
register int col;
char buf[30];
int hex; /* 'x' or 'X': hexadecimal; '0': octal */
static int hexupper = FALSE; /* 0xABC */
ptr = nr2ptr(Curpos.lnum);
col = Curpos.col;
/* first check if we are on a hexadecimal number */
while (col > 0 && isxdigit(ptr[col]))
--col;
if (col > 0 && toupper(ptr[col]) == 'X' && ptr[col - 1] == '0' && isxdigit(ptr[col + 1]))
--col; /* found hexadecimal number */
else
{
/* first search forward and then backward for start of number */
col = Curpos.col;
while (ptr[col] != NUL && !isdigit(ptr[col]))
++col;
while (col > 0 && isdigit(ptr[col - 1]))
--col;
}
if (isdigit(ptr[col]) && u_saveCurpos())
{
set_want_col = TRUE;
prep_redo(Prenum1, c, NUL, NUL);
if (ptr[col] != '0')
hex = 0; /* decimal */
else
{
hex = toupper(ptr[col + 1]); /* assume hexadecimal */
if (hex != 'X' || !isxdigit(ptr[col + 2]))
{
if (isdigit(hex))
hex = '0'; /* octal */
else
hex = 0; /* 0 by itself is decimal */
}
}
if (!hex && col > 0 && ptr[col - 1] == '-')
--col;
ptr += col;
if (hex == '0')
sscanf(ptr, "%lo", &n);
else if (hex)
sscanf(ptr, "%lx", &n); /* "%X" doesn't work! */
else
n = atol(ptr);
if (c == CTRL('A'))
n += Prenum1;
else
n -= Prenum1;
if (hex == 'X') /* skip the '0x' */
col += 2;
Curpos.col = col;
do /* delete the old number */
{
if (isalpha(c))
{
if (isupper(c))
hexupper = TRUE;
else
hexupper = FALSE;
}
delchar(FALSE);
c = gcharCurpos();
}
while (hex ? (hex == '0' ? c >= '0' && c <= '7' : isxdigit(c)) : isdigit(c));
if (hex == '0')
sprintf(buf, "0%lo", n);
else if (hexupper)
sprintf(buf, "%lX", n);
else if (hex)
sprintf(buf, "%lx", n);
else
sprintf(buf, "%ld", n);
insstr(buf); /* insert the new number */
--Curpos.col;
updateline();
}
else
beep();
}
break;
/*
* 6: Inserts
*/
case 'A':
set_want_col = TRUE;
while (oneright())
;
/* FALLTHROUGH */
case 'a':
CHECKCLEAROPQ;
/* Works just like an 'i'nsert on the next character. */
if (u_saveCurpos())
{
if (!lineempty(Curpos.lnum))
incCurpos();
startinsert(c, FALSE, Prenum1);
command_busy = TRUE;
}
break;
case 'I':
beginline(TRUE);
/* FALLTHROUGH */
case 'i':
CHECKCLEAROPQ;
if (u_saveCurpos())
{
startinsert(c, FALSE, Prenum1);
command_busy = TRUE;
}
break;
case 'o':
if (Quote.lnum) /* switch start and end of quote */
{
Prenum = Quote.lnum;
Quote.lnum = Curpos.lnum;
Curpos.lnum = Prenum;
n = Quote.col;
Quote.col = Curpos.col;
Curpos.col = n;
break;
}
CHECKCLEAROP;
if (u_save(Curpos.lnum, (linenr_t)(Curpos.lnum + 1)) && Opencmd(FORWARD, TRUE))
{
startinsert('o', TRUE, Prenum1);
command_busy = TRUE;
}
break;
case 'O':
CHECKCLEAROPQ;
if (u_save((linenr_t)(Curpos.lnum - 1), Curpos.lnum) && Opencmd(BACKWARD, TRUE))
{
startinsert('O', TRUE, Prenum1);
command_busy = TRUE;
}
break;
case 'R':
if (Quote.lnum)
{
c = 'c';
Quote.col = QUOTELINE;
goto dooperator;
}
CHECKCLEAROPQ;
if (u_saveCurpos())
{
startinsert('R', FALSE, Prenum1);
command_busy = TRUE;
}
break;
/*
* 7: Operators
*/
case '~': /* swap case */
/*
* if tilde is not an operator and Quoting is off: swap case
* of a single character
*/
if (!p_to && !Quote.lnum)
{
CHECKCLEAROPQ;
if (lineempty(Curpos.lnum))
{
CLEAROPBEEP;
break;
}
prep_redo(Prenum, '~', NUL, NUL);
if (!u_saveCurpos())
break;
for (; Prenum1 > 0; --Prenum1)
{
if (gcharCurpos() == NUL)
break;
swapchar(&Curpos);
incCurpos();
}
set_want_col = TRUE;
CHANGED;
updateline();
break;
}
/*FALLTHROUGH*/
case 'd':
case 'c':
case 'y':
case '>':
case '<':
case '!':
case '=':
case 'V':
dooperator:
n = strchr(opchars, c) - opchars + 1;
if (n == operator) /* double operator works on lines */
goto lineop;
CHECKCLEAROP;
if (Prenum != 0)
opnum = Prenum;
startop = Curpos;
operator = n;
break;
/*
* 8: Abbreviations
*/
/* when quoting the next commands are operators */
case 'S':
case 'Y':
case 'D':
case 'C':
case 'x':
case 'X':
case 's':
if (Quote.lnum)
{
static char trans[] = "ScYyDdCcxdXdsc";
if (isupper(c)) /* uppercase means linewise */
Quote.col = QUOTELINE;
c = *(strchr(trans, c) + 1);
goto dooperator;
}
case '&':
CHECKCLEAROPQ;
if (Prenum)
stuffnumReadbuff(Prenum);
if (c == 'S')
{
beginline((int)p_ai);
substituting = TRUE;
}
else if (c == 'Y' && p_ye)
c = 'Z';
{
static char *(ar[9]) = {"dl", "dh", "d$", "c$", "cl", "c$", "yy", "y$", ":s\r"};
static char *str = "xXDCsSYZ&";
stuffReadbuff(ar[strchr(str, c) - str]);
}
break;
/*
* 9: Marks
*/
case 'm':
CHECKCLEAROP;
if (!setmark(nchar))
CLEAROPBEEP;
break;
case '\'':
flag = TRUE;
/* FALLTHROUGH */
case '`':
pos = getmark(nchar, (operator == NOP));
if (pos == (FPOS *)-1) /* jumped to other file */
{
if (flag)
beginline(TRUE);
break;
}
if (pos != NULL)
setpcmark();
cursormark:
if (pos == NULL)
CLEAROPBEEP;
else
{
Curpos = *pos;
if (flag)
beginline(TRUE);
}
mtype = flag ? MLINE : MCHAR;
mincl = FALSE; /* ignored if not MCHAR */
set_want_col = TRUE;
break;
case CTRL('O'): /* goto older pcmark */
Prenum1 = -Prenum1;
/* FALLTHROUGH */
case CTRL('I'): /* goto newer pcmark */
CHECKCLEAROPQ;
pos = movemark((int)Prenum1);
if (pos == (FPOS *)-1) /* jump to other file */
{
set_want_col = TRUE;
break;
}
goto cursormark;
/*
* 10. Buffer setting
*/
case '"':
CHECKCLEAROP;
if (isalnum(nchar) || nchar == '.')
{
yankbuffer = nchar;
opnum = Prenum; /* remember count before '"' */
}
else
CLEAROPBEEP;
break;
/*
* 11. Quoting
*/
case 'q':
case 'Q':
case CTRL('Q'):
CHECKCLEAROP;
Quote_block = FALSE;
if (Quote.lnum) /* stop quoting */
{
Quote.lnum = 0;
updateScreen(NOT_VALID); /* delete the inversion */
}
else /* start quoting */
{
Quote = Curpos;
if (c == 'Q') /* linewise */
Quote.col = QUOTELINE;
else if (c == CTRL('Q')) /* blockwise */
Quote_block = TRUE;
updateline(); /* start the inversion */
}
break;
/*
* 12. Suspend
*/
case CTRL('Z'):
CLEAROP;
Quote.lnum = 0; /* stop quoting */
stuffReadbuff(":st!\r"); /* no autowrite */
break;
/*
* The end
*/
case ESC:
if (Quote.lnum)
{
Quote.lnum = 0; /* stop quoting */
updateScreen(NOT_VALID);
}
default: /* not a known command */
CLEAROPBEEP;
break;
} /* end of switch on command character */
/*
* if we didn't start or finish an operator, reset yankbuffer, unless we
* need it later.
*/
if (!finish_op && !operator && strchr("\"DCYSsXx", c) == NULL)
yankbuffer = 0;
/*
* If an operation is pending, handle it...
*/
if ((Quote.lnum || finish_op) && operator != NOP)
{
if (operator != YANK && !Quote.lnum) /* can't redo yank */
{
prep_redo(Prenum, opchars[operator - 1], c, nchar);
if (c == '/' || c == '?') /* was a search */
{
AppendToRedobuff(searchbuff);
AppendToRedobuff(NL_STR);
}
}
if (redo_Quote_busy)
{
startop = Curpos;
Curpos.lnum += redo_Quote_nlines - 1;
switch (redo_Quote_type)
{
case 'Q': Quote.col = QUOTELINE;
break;
case CTRL('Q'):
Quote_block = TRUE;
break;
case 'q':
if (redo_Quote_nlines <= 1)
Curpos.col += redo_Quote_col;
else
Curpos.col = redo_Quote_col;
break;
}
if (redo_Quote_col == 29999)
{
Curswant = 29999;
coladvance(29999);
}
}
else if (Quote.lnum)
startop = Quote;
if (lt(startop, Curpos))
{
endop = Curpos;
Curpos = startop;
}
else
{
endop = startop;
startop = Curpos;
}
nlines = endop.lnum - startop.lnum + 1;
if (Quote.lnum || redo_Quote_busy)
{
if (Quote_block) /* block mode */
{
startvcol = getvcol(&startop, 2);
n = getvcol(&endop, 2);
if (n < startvcol)
startvcol = n;
/* if '$' was used, get endvcol from longest line */
if (Curswant == 29999)
{
Curpos.col = 29999;
endvcol = 0;
for (Curpos.lnum = startop.lnum; Curpos.lnum <= endop.lnum; ++Curpos.lnum)
if ((n = getvcol(&Curpos, 3)) > endvcol)
endvcol = n;
Curpos = startop;
}
else if (redo_Quote_busy)
endvcol = startvcol + redo_Quote_col;
else
{
endvcol = getvcol(&startop, 3);
n = getvcol(&endop, 3);
if (n > endvcol)
endvcol = n;
}
coladvance(startvcol);
}
/*
* prepare to redo quoting: this is based on the size
* of the quoted text
*/
if (operator != YANK) /* can't redo yank */
{
prep_redo(0L, 'q', opchars[operator - 1], NUL);
if (Quote_block)
redo_Quote_type = CTRL('Q');
else if (Quote.col == QUOTELINE)
redo_Quote_type = 'Q';
else
redo_Quote_type = 'q';
if (Curswant == 29999)
redo_Quote_col = 29999;
else if (Quote_block)
redo_Quote_col = endvcol - startvcol;
else if (nlines > 1)
redo_Quote_col = endop.col;
else
redo_Quote_col = endop.col - startop.col;
redo_Quote_nlines = nlines;
}
mincl = TRUE;
if (Quote.col == QUOTELINE)
mtype = MLINE;
else
mtype = MCHAR;
redo_Quote_busy = FALSE;
/*
* Switch quoting off now, so screen updating does
* not show inverted text when the screen is redrawn.
* With YANK and sometimes with COLON there is no screen redraw, so
* it is done here to remove the inverted part.
*/
Quote.lnum = 0;
if (operator == YANK || operator == COLON)
updateScreen(NOT_VALID);
}
set_want_col = 1;
if (!mincl && !equal(startop, endop))
oneless = 1;
else
oneless = 0;
switch (operator)
{
case LSHIFT:
case RSHIFT:
adjust_lnum();
doshift(operator);
break;
case DELETE:
dodelete();
break;
case YANK:
doyank(FALSE);
break;
case CHANGE:
dochange();
break;
case FILTER:
AppendToRedobuff("!\n"); /* strange but necessary */
case INDENT:
case COLON:
adjust_lnum();
sprintf(IObuff, ":%ld,%ld", (long)startop.lnum, (long)endop.lnum);
stuffReadbuff(IObuff);
if (operator != COLON)
stuffReadbuff("!");
if (operator == INDENT)
{
stuffReadbuff(p_ep);
stuffReadbuff("\n");
}
/* docmdline() does the rest */
break;
case TILDE:
case UPPER:
case LOWER:
dotilde();
break;
case FORMAT:
adjust_lnum();
doformat();
break;
default:
CLEAROPBEEP;
}
operator = NOP;
Quote_block = FALSE;
yankbuffer = 0;
}
normal_end:
premsg(-1, NUL);
if (restart_edit && operator == NOP && Quote.lnum == 0 && !command_busy && stuff_empty() && yankbuffer == 0)
startinsert(NUL, FALSE, 1L);
}
void
normal()
{
register int c;
long n;
int flag = FALSE;
int flag2 = FALSE;
int type = 0; /* type of operation */
int dir = FORWARD; /* search direction */
int nchar = NUL;
int finish_op;
linenr_t Prenum1;
char_u searchbuff[CMDBUFFSIZE];/* buffer for search string */
FPOS *pos = NULL; /* init for gcc */
register char_u *ptr;
int command_busy = FALSE;
static int didwarn = FALSE; /* warned for broken inversion */
int modified = FALSE; /* changed current buffer */
int ctrl_w = FALSE; /* got CTRL-W command */
/* the visual area is remembered for reselection */
static linenr_t resel_Visual_nlines; /* number of lines */
static int resel_Visual_type = 0; /* type 'v', 'V' or CTRL-V */
static colnr_t resel_Visual_col; /* number of columns or end column */
/* the visual area is remembered for redo */
static linenr_t redo_Visual_nlines; /* number of lines */
static int redo_Visual_type = 0; /* type 'v', 'V' or CTRL-V */
static colnr_t redo_Visual_col; /* number of columns or end column */
static long redo_Visual_Prenum; /* Prenum for operator */
Prenum = 0;
/*
* If there is an operator pending, then the command we take this time
* will terminate it. Finish_op tells us to finish the operation before
* returning this time (unless the operation was cancelled).
*/
finish_op = (operator != NOP);
if (!finish_op && !yankbuffer)
opnum = 0;
if (p_sc && (vpeekc() == NUL || KeyTyped == TRUE))
premsg(NUL, NUL);
State = NORMAL_BUSY;
c = vgetc();
getcount:
/* Pick up any leading digits and compute 'Prenum' */
while ((c >= '1' && c <= '9') || (Prenum != 0 && (c == DEL || c == '0')))
{
if (c == DEL)
Prenum /= 10;
else
Prenum = Prenum * 10 + (c - '0');
if (Prenum < 0) /* got too large! */
Prenum = 999999999;
premsg(ctrl_w ? Ctrl('W') : ' ', NUL);
c = vgetc();
}
/*
* If we got CTRL-W there may be a/another count
*/
if (c == Ctrl('W') && !ctrl_w)
{
ctrl_w = TRUE;
opnum = Prenum; /* remember first count */
Prenum = 0;
State = ONLYKEY; /* no mapping for nchar, but keys */
premsg(c, NUL);
c = vgetc(); /* get next character */
goto getcount; /* jump back */
}
/*
* If we're in the middle of an operator (including after entering a yank
* buffer with ") AND we had a count before the
* operator, then that count overrides the current value of Prenum. What
* this means effectively, is that commands like "3dw" get turned into
* "d3w" which makes things fall into place pretty neatly.
* If you give a count before AND after the operator, they are multiplied.
*/
if (opnum != 0)
{
if (Prenum)
Prenum *= opnum;
else
Prenum = opnum;
opnum = 0;
}
Prenum1 = (Prenum == 0 ? 1 : Prenum); /* Prenum often defaults to 1 */
premsg(c, NUL);
/*
* get an additional character if we need one
* for CTRL-W we already got it when looking for a count
*/
if (ctrl_w)
{
nchar = c;
c = Ctrl('W');
premsg(c, nchar);
}
else if (strchr("@zZtTfF[]mg'`\"", c) || (c == 'q' && !Recording && !Exec_reg) ||
(c == 'r' && !VIsual.lnum))
{
State = NOMAPPING;
nchar = vgetc(); /* no macro mapping for this char */
premsg(c, nchar);
}
if (p_sc)
flushbuf(); /* flush the premsg() characters onto the screen so we can
see them while the command is being executed */
/*
* For commands that don't get another character we can put the State back to
* NORMAL and check for a window size change.
*/
if (STRCHR("z:/?", c) == NULL)
State = NORMAL;
if (nchar == ESC)
{
CLEAROP;
goto normal_end;
}
switch (c)
{
/*
* 0: Macros
*/
case 'q': /* (stop) recording into a named register */
CHECKCLEAROP;
/* command is ignored while executing a register */
if (!Exec_reg && dorecord(nchar) == FAIL)
CLEAROPBEEP;
break;
case '@': /* execute a named buffer */
CHECKCLEAROP;
while (Prenum1--)
{
if (doexecbuf(nchar) == FAIL)
{
CLEAROPBEEP;
break;
}
}
break;
/*
* 1: Screen positioning commands
*/
case Ctrl('D'):
flag = TRUE;
case Ctrl('U'):
CHECKCLEAROP;
if (Prenum)
curwin->w_p_scroll = (Prenum > curwin->w_height) ? curwin->w_height : Prenum;
n = (curwin->w_p_scroll <= curwin->w_height) ? curwin->w_p_scroll : curwin->w_height;
if (flag)
{
curwin->w_topline += n;
if (curwin->w_topline > curbuf->b_ml.ml_line_count)
curwin->w_topline = curbuf->b_ml.ml_line_count;
comp_Botline(curwin); /* compute curwin->w_botline */
(void)onedown(n);
}
else
{
if (n >= curwin->w_cursor.lnum)
n = curwin->w_cursor.lnum - 1;
Prenum1 = curwin->w_cursor.lnum - n;
scrolldown(n);
if (Prenum1 < curwin->w_cursor.lnum)
curwin->w_cursor.lnum = Prenum1;
}
beginline(TRUE);
updateScreen(VALID);
break;
case Ctrl('B'):
case K_SUARROW:
dir = BACKWARD;
case Ctrl('F'):
case K_SDARROW:
CHECKCLEAROP;
(void)onepage(dir, Prenum1);
break;
case Ctrl('E'):
CHECKCLEAROP;
scrollup(Prenum1);
/* We may have moved to another line -- webb */
coladvance(curwin->w_curswant);
updateScreen(VALID);
break;
case Ctrl('Y'):
CHECKCLEAROP;
scrolldown(Prenum1);
/* We may have moved to another line -- webb */
coladvance(curwin->w_curswant);
updateScreen(VALID);
break;
case 'z':
CHECKCLEAROP;
if (isdigit(nchar))
{
/*
* we misuse some variables to be able to call premsg()
*/
operator = c;
opnum = Prenum;
Prenum = nchar - '0';
for (;;)
{
premsg(' ', NUL);
nchar = vgetc();
State = NORMAL;
if (nchar == DEL)
Prenum /= 10;
else if (isdigit(nchar))
Prenum = Prenum * 10 + (nchar - '0');
else if (nchar == CR)
{
win_setheight((int)Prenum);
break;
}
else
{
CLEAROPBEEP;
break;
}
}
operator = NOP;
break;
}
if (Prenum && Prenum != curwin->w_cursor.lnum) /* line number given */
{
setpcmark();
if (Prenum > curbuf->b_ml.ml_line_count)
curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
else
curwin->w_cursor.lnum = Prenum;
}
State = NORMAL; /* for updateScreen() */
switch (nchar)
{
case NL: /* put curwin->w_cursor at top of screen */
case CR:
beginline(TRUE);
case 't':
curwin->w_topline = curwin->w_cursor.lnum;
break;
case '.': /* put curwin->w_cursor in middle of screen */
case 'z':
n = (curwin->w_height + plines(curwin->w_cursor.lnum)) / 2;
goto dozcmd;
case '-': /* put curwin->w_cursor at bottom of screen */
case 'b':
n = curwin->w_height;
/* FALLTHROUGH */
dozcmd:
{
register linenr_t lp = curwin->w_cursor.lnum;
register long l = plines(lp);
do
{
curwin->w_topline = lp;
if (--lp == 0)
break;
l += plines(lp);
} while (l <= n);
}
if (nchar != 'z' && nchar != 'b')
beginline(TRUE);
break;
case Ctrl('S'): /* ignore CTRL-S and CTRL-Q to avoid problems */
case Ctrl('Q'): /* with terminals that use xon/xoff */
break;
default:
CLEAROPBEEP;
}
updateScreen(VALID);
break;
/*
* 2: Control commands
*/
case ':':
if (VIsual.lnum)
goto dooperator;
CHECKCLEAROP;
/*
* translate "count:" into ":.,.+(count - 1)"
*/
if (Prenum)
{
stuffReadbuff((char_u *)".");
if (Prenum > 1)
{
stuffReadbuff((char_u *)",.+");
stuffnumReadbuff((long)Prenum - 1L);
}
}
docmdline(NULL);
modified = TRUE;
break;
case K_HELP:
CHECKCLEAROP;
help();
break;
case Ctrl('L'):
CHECKCLEAROP;
updateScreen(CLEAR);
break;
case Ctrl('G'):
CHECKCLEAROP;
fileinfo(did_cd || Prenum); /* print full name if count given or :cd used */
break;
case K_CCIRCM: /* CTRL-^, short for ":e #" */
CHECKCLEAROPQ;
(void)buflist_getfile((int)Prenum, (linenr_t)0, TRUE);
break;
case 'Z': /* write, if changed, and exit */
CHECKCLEAROPQ;
if (nchar != 'Z')
{
CLEAROPBEEP;
break;
}
stuffReadbuff((char_u *)":x\n");
break;
case Ctrl(']'): /* :ta to current identifier */
CHECKCLEAROPQ;
case '*': /* / to current identifier or string */
case '#': /* ? to current identifier or string */
case 'K': /* run program for current identifier */
{
register int col;
register int i;
/*
* if i == 0: try to find an identifier
* if i == 1: try to find any string
*/
ptr = ml_get(curwin->w_cursor.lnum);
for (i = 0; i < 2; ++i)
{
/*
* skip to start of identifier/string
*/
col = curwin->w_cursor.col;
while (ptr[col] != NUL &&
(i == 0 ? !isidchar(ptr[col]) : iswhite(ptr[col])))
++col;
/*
* Back up to start of identifier/string. This doesn't match the
* real vi but I like it a little better and it shouldn't bother
* anyone.
*/
while (col > 0 && (i == 0 ? isidchar(ptr[col - 1]) :
(!iswhite(ptr[col - 1]) && !isidchar(ptr[col - 1]))))
--col;
/*
* if identifier found or not '*' or '#' command, stop searching
*/
if (isidchar(ptr[col]) || (c != '*' && c != '#'))
break;
}
/*
* did't find an identifier of string
*/
if (ptr[col] == NUL || (!isidchar(ptr[col]) && i == 0))
{
CLEAROPBEEP;
break;
}
if (Prenum)
stuffnumReadbuff(Prenum);
switch (c)
{
case '*':
stuffReadbuff((char_u *)"/");
goto sow;
case '#':
stuffReadbuff((char_u *)"?");
sow: if (i == 0)
stuffReadbuff((char_u *)"\\<");
break;
case 'K':
stuffReadbuff((char_u *)":! ");
stuffReadbuff(p_kp);
stuffReadbuff((char_u *)" ");
break;
default:
stuffReadbuff((char_u *)":ta ");
}
/*
* Now grab the chars in the identifier
*/
while (i == 0 ? isidchar(ptr[col]) :
(ptr[col] != NUL && !iswhite(ptr[col])))
{
stuffcharReadbuff(ptr[col]);
++col;
}
if ((c == '*' || c == '#') && i == 0)
stuffReadbuff((char_u *)"\\>");
stuffReadbuff((char_u *)"\n");
}
break;
case Ctrl('T'): /* backwards in tag stack */
CHECKCLEAROPQ;
dotag((char_u *)"", 2, (int)Prenum1);
break;
/*
* Cursor motions
*/
case 'G':
mtype = MLINE;
setpcmark();
if (Prenum == 0 || Prenum > curbuf->b_ml.ml_line_count)
curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
else
curwin->w_cursor.lnum = Prenum;
beginline(TRUE);
break;
case 'H':
case 'M':
if (c == 'M')
n = (curwin->w_height - curwin->w_empty_rows) / 2;
else
n = Prenum;
mtype = MLINE;
setpcmark();
curwin->w_cursor.lnum = curwin->w_topline;
while (n && onedown((long)1) == OK)
--n;
beginline(TRUE);
break;
case 'L':
mtype = MLINE;
setpcmark();
curwin->w_cursor.lnum = curwin->w_botline - 1;
for (n = Prenum; n && oneup((long)1) == OK; n--)
;
beginline(TRUE);
break;
case 'l':
case K_RARROW:
case ' ':
mtype = MCHAR;
mincl = FALSE;
n = Prenum1;
while (n--)
{
if (oneright() == FAIL)
{
/* space wraps to next line if 'whichwrap' bit 1 set */
/* 'l' wraps to next line if 'whichwrap' bit 2 set */
/* CURS_RIGHT wraps to next line if 'whichwrap' bit 3 set */
if (((c == ' ' && (p_ww & 2)) ||
(c == 'l' && (p_ww & 4)) ||
(c == K_RARROW && (p_ww & 8))) &&
curwin->w_cursor.lnum < curbuf->b_ml.ml_line_count)
{
++curwin->w_cursor.lnum;
curwin->w_cursor.col = 0;
curwin->w_set_curswant = TRUE;
continue;
}
if (operator == NOP)
beep();
else
{
if (lineempty(curwin->w_cursor.lnum))
CLEAROPBEEP;
else
{
mincl = TRUE;
if (n)
beep();
}
}
break;
}
}
break;
case Ctrl('H'):
case 'h':
case K_LARROW:
case DEL:
mtype = MCHAR;
mincl = FALSE;
n = Prenum1;
while (n--)
{
if (oneleft() == FAIL)
{
/* backspace and del wrap to previous line if 'whichwrap'
* bit 0 set */
/* 'h' wraps to previous line if 'whichwrap' bit 2 set */
/* CURS_LEFT wraps to previous line if 'whichwrap' bit 3 set */
if ((((c == Ctrl('H') || c == DEL) && (p_ww & 1)) ||
(c == 'h' && (p_ww & 4)) ||
(c == K_LARROW && (p_ww & 8))) &&
curwin->w_cursor.lnum > 1)
{
--(curwin->w_cursor.lnum);
coladvance(MAXCOL);
curwin->w_set_curswant = TRUE;
continue;
}
else if (operator != DELETE && operator != CHANGE)
beep();
else if (Prenum1 == 1)
CLEAROPBEEP;
break;
}
}
break;
case '-':
flag = TRUE;
/* FALLTHROUGH */
case 'k':
case K_UARROW:
case Ctrl('P'):
mtype = MLINE;
if (oneup(Prenum1) == FAIL)
CLEAROPBEEP;
else if (flag)
beginline(TRUE);
break;
case '+':
case CR:
flag = TRUE;
/* FALLTHROUGH */
case 'j':
case K_DARROW:
case Ctrl('N'):
case NL:
mtype = MLINE;
if (onedown(Prenum1) == FAIL)
CLEAROPBEEP;
else if (flag)
beginline(TRUE);
break;
/*
* This is a strange motion command that helps make operators more
* logical. It is actually implemented, but not documented in the
* real 'vi'. This motion command actually refers to "the current
* line". Commands like "dd" and "yy" are really an alternate form of
* "d_" and "y_". It does accept a count, so "d3_" works to delete 3
* lines.
*/
case '_':
lineop:
mtype = MLINE;
if (onedown((long)(Prenum1 - 1)) == FAIL)
CLEAROPBEEP;
if (operator != YANK) /* 'Y' does not move cursor */
beginline(TRUE);
break;
case '|':
mtype = MCHAR;
mincl = TRUE;
beginline(FALSE);
if (Prenum > 0)
coladvance((colnr_t)(Prenum - 1));
curwin->w_curswant = (colnr_t)(Prenum - 1);
/* keep curswant at the column where we wanted to go, not where
we ended; differs is line is too short */
curwin->w_set_curswant = FALSE;
break;
/*
* Word Motions
*/
case 'B':
type = 1;
/* FALLTHROUGH */
case 'b':
case K_SLARROW:
mtype = MCHAR;
mincl = FALSE;
curwin->w_set_curswant = TRUE;
if (bck_word(Prenum1, type))
CLEAROPBEEP;
break;
case 'E':
type = 1;
/* FALLTHROUGH */
case 'e':
mincl = TRUE;
goto dowrdcmd;
case 'W':
type = 1;
/* FALLTHROUGH */
case 'w':
case K_SRARROW:
mincl = FALSE;
flag = TRUE;
/*
* This is a little strange. To match what the real vi does, we
* effectively map 'cw' to 'ce', and 'cW' to 'cE', provided that we are
* not on a space or a TAB. This seems
* impolite at first, but it's really more what we mean when we say
* 'cw'.
* Another strangeness: When standing on the end of a word "ce" will
* change until the end of the next wordt, but "cw" will change only
* one character! This is done by setting type to 2.
*/
if (operator == CHANGE && (n = gchar_cursor()) != ' ' && n != TAB &&
n != NUL)
{
mincl = TRUE;
flag = FALSE;
flag2 = TRUE;
}
dowrdcmd:
mtype = MCHAR;
curwin->w_set_curswant = TRUE;
if (flag)
n = fwd_word(Prenum1, type, operator != NOP);
else
n = end_word(Prenum1, type, flag2);
if (n)
{
CLEAROPBEEP;
break;
}
#if 0
/*
* If we do a 'dw' for the last word in a line, we only delete the rest
* of the line, not joining the two lines, unless the current line is empty.
*/
if (operator == DELETE && Prenum1 == 1 &&
curbuf->b_startop.lnum != curwin->w_cursor.lnum && !lineempty(startop.lnum))
{
curwin->w_cursor = curbuf->b_startop;
while (oneright() == OK)
;
mincl = TRUE;
}
#endif
break;
case '$':
mtype = MCHAR;
mincl = TRUE;
curwin->w_curswant = MAXCOL; /* so we stay at the end */
if (onedown((long)(Prenum1 - 1)) == FAIL)
{
CLEAROPBEEP;
break;
}
break;
case '^':
flag = TRUE;
/* FALLTHROUGH */
case '0':
mtype = MCHAR;
mincl = FALSE;
beginline(flag);
break;
/*
* 4: Searches
*/
case '?':
case '/':
if (!getcmdline(c, searchbuff))
{
CLEAROP;
break;
}
mtype = MCHAR;
mincl = FALSE;
curwin->w_set_curswant = TRUE;
n = dosearch(c, searchbuff, FALSE, Prenum1, TRUE, TRUE);
if (n == 0)
CLEAROP;
else if (n == 2)
mtype = MLINE;
break;
case 'N':
flag = 1;
case 'n':
mtype = MCHAR;
mincl = FALSE;
curwin->w_set_curswant = TRUE;
if (!dosearch(0, NULL, flag, Prenum1, TRUE, TRUE))
CLEAROP;
break;
/*
* Character searches
*/
case 'T':
dir = BACKWARD;
/* FALLTHROUGH */
case 't':
type = 1;
goto docsearch;
case 'F':
dir = BACKWARD;
/* FALLTHROUGH */
case 'f':
docsearch:
mtype = MCHAR;
if (dir == BACKWARD)
mincl = FALSE;
else
mincl = TRUE;
curwin->w_set_curswant = TRUE;
if (!searchc(nchar, dir, type, Prenum1))
CLEAROPBEEP;
break;
case ',':
flag = 1;
/* FALLTHROUGH */
case ';':
dir = flag;
goto docsearch; /* nchar == NUL, thus repeat previous search */
/*
* section or C function searches
*/
case '[':
dir = BACKWARD;
/* FALLTHROUGH */
case ']':
mtype = MCHAR;
mincl = FALSE;
/*
* "[f" or "]f" : Edit file under the cursor (same as "gf")
*/
if ((c == ']' || c == '[') && nchar == 'f')
goto gotofile;
/*
* "[{", "[(", "]}" or "])": go to Nth unclosed '{', '(', '}' or ')'
*/
if ((c == '[' && (nchar == '{' || nchar == '(')) ||
((c == ']' && (nchar == '}' || nchar == ')'))))
{
FPOS old_pos;
old_pos = curwin->w_cursor;
while (Prenum1--)
{
if ((pos = showmatch(nchar)) == NULL)
{
CLEAROPBEEP;
break;
}
curwin->w_cursor = *pos;
}
curwin->w_cursor = old_pos;
if (pos != NULL)
{
setpcmark();
curwin->w_cursor = *pos;
curwin->w_set_curswant = TRUE;
}
break;
}
/*
* "[[", "[]", "]]" and "][": move to start or end of function
*/
if (nchar == '[' || nchar == ']')
{
if (nchar == c) /* "]]" or "[[" */
flag = '{';
else
flag = '}'; /* "][" or "[]" */
curwin->w_set_curswant = TRUE;
/*
* Imitate strange vi behaviour: When using "]]" with an operator we
* also stop at '}'.
*/
if (!findpar(dir, Prenum1, flag,
(operator != NOP && dir == FORWARD && flag == '{')))
CLEAROPBEEP;
break;
}
/*
* "[p" and "]p": put with indent adjustment
*/
if (nchar == 'p')
{
doput((c == ']') ? FORWARD : BACKWARD, Prenum1, TRUE);
modified = TRUE;
break;
}
/*
* end of '[' and ']': not a valid nchar
*/
CLEAROPBEEP;
break;
case '%':
mincl = TRUE;
if (Prenum) /* {cnt}% : goto {cnt} percentage in file */
{
if (Prenum > 100)
CLEAROPBEEP;
else
{
mtype = MLINE;
setpcmark();
/* round up, so CTRL-G will give same value */
curwin->w_cursor.lnum = (curbuf->b_ml.ml_line_count * Prenum + 99) / 100;
beginline(TRUE);
}
}
else /* % : go to matching paren */
{
mtype = MCHAR;
if ((pos = showmatch(NUL)) == NULL)
CLEAROPBEEP;
else
{
setpcmark();
curwin->w_cursor = *pos;
curwin->w_set_curswant = TRUE;
}
}
break;
case '(':
dir = BACKWARD;
/* FALLTHROUGH */
case ')':
mtype = MCHAR;
if (c == ')')
mincl = FALSE;
else
mincl = TRUE;
curwin->w_set_curswant = TRUE;
if (!findsent(dir, Prenum1))
CLEAROPBEEP;
break;
case '{':
dir = BACKWARD;
/* FALLTHROUGH */
case '}':
mtype = MCHAR;
mincl = FALSE;
curwin->w_set_curswant = TRUE;
if (!findpar(dir, Prenum1, NUL, FALSE))
CLEAROPBEEP;
break;
/*
* 5: Edits
*/
case '.':
CHECKCLEAROPQ;
if (start_redo(Prenum) == FAIL)
CLEAROPBEEP;
modified = TRUE;
break;
case 'u':
if (VIsual.lnum)
goto dooperator;
case K_UNDO:
CHECKCLEAROPQ;
u_undo((int)Prenum1);
curwin->w_set_curswant = TRUE;
modified = TRUE;
break;
case Ctrl('R'):
CHECKCLEAROPQ;
u_redo((int)Prenum1);
curwin->w_set_curswant = TRUE;
modified = TRUE;
break;
case 'U':
if (VIsual.lnum)
goto dooperator;
CHECKCLEAROPQ;
u_undoline();
curwin->w_set_curswant = TRUE;
modified = TRUE;
break;
case 'r':
if (VIsual.lnum)
{
c = 'c';
goto dooperator;
}
CHECKCLEAROPQ;
ptr = ml_get_cursor();
if (STRLEN(ptr) < (unsigned)Prenum1) /* not enough characters to replace */
{
CLEAROPBEEP;
break;
}
/*
* Replacing with a line break or tab is done by edit(), because it
* is complicated.
* Other characters are done below to avoid problems with things like
* CTRL-V 048 (for edit() this would be R CTRL-V 0 ESC).
*/
if (nchar == '\r' || nchar == '\n' || nchar == '\t')
{
prep_redo(Prenum1, 'r', nchar, NUL);
stuffnumReadbuff(Prenum1);
stuffcharReadbuff('R');
stuffcharReadbuff(nchar);
stuffcharReadbuff(ESC);
break;
}
if (nchar == Ctrl('V')) /* get another character */
{
c = Ctrl('V');
nchar = get_literal(&type);
if (type) /* typeahead */
stuffcharReadbuff(type);
}
else
c = NUL;
prep_redo(Prenum1, 'r', c, nchar);
if (!u_save_cursor()) /* save line for undo */
break;
/*
* Get ptr again, because u_save will have released the line.
* At the same time we let know that the line will be changed.
*/
ptr = ml_get_buf(curbuf, curwin->w_cursor.lnum, TRUE) + curwin->w_cursor.col;
curwin->w_cursor.col += Prenum1 - 1;
while (Prenum1--) /* replace the characters */
*ptr++ = nchar;
curwin->w_set_curswant = TRUE;
CHANGED;
updateline();
modified = TRUE;
break;
case 'J':
if (VIsual.lnum) /* join the visual lines */
{
if (curwin->w_cursor.lnum > VIsual.lnum)
{
Prenum = curwin->w_cursor.lnum - VIsual.lnum + 1;
curwin->w_cursor.lnum = VIsual.lnum;
}
else
Prenum = VIsual.lnum - curwin->w_cursor.lnum + 1;
VIsual.lnum = 0;
}
CHECKCLEAROP;
if (Prenum <= 1)
Prenum = 2; /* default for join is two lines! */
if (curwin->w_cursor.lnum + Prenum - 1 > curbuf->b_ml.ml_line_count) /* beyond last line */
{
CLEAROPBEEP;
break;
}
prep_redo(Prenum, 'J', NUL, NUL);
dodojoin(Prenum, TRUE, TRUE);
modified = TRUE;
break;
case 'P':
dir = BACKWARD;
/* FALLTHROUGH */
case 'p':
CHECKCLEAROPQ;
prep_redo(Prenum, c, NUL, NUL);
doput(dir, Prenum1, FALSE);
modified = TRUE;
break;
case Ctrl('A'): /* add to number */
case Ctrl('X'): /* subtract from number */
CHECKCLEAROPQ;
if (doaddsub((int)c, Prenum1) == OK)
prep_redo(Prenum1, c, NUL, NUL);
modified = TRUE;
break;
/*
* 6: Inserts
*/
case 'A':
curwin->w_set_curswant = TRUE;
while (oneright() == OK)
;
/* FALLTHROUGH */
case 'a':
CHECKCLEAROPQ;
/* Works just like an 'i'nsert on the next character. */
if (u_save_cursor())
{
if (!lineempty(curwin->w_cursor.lnum))
inc_cursor();
startinsert(c, FALSE, Prenum1);
modified = TRUE;
command_busy = TRUE;
}
break;
case 'I':
beginline(TRUE);
/* FALLTHROUGH */
case 'i':
CHECKCLEAROPQ;
if (u_save_cursor())
{
startinsert(c, FALSE, Prenum1);
modified = TRUE;
command_busy = TRUE;
}
break;
case 'o':
if (VIsual.lnum) /* switch start and end of visual */
{
Prenum = VIsual.lnum;
VIsual.lnum = curwin->w_cursor.lnum;
curwin->w_cursor.lnum = Prenum;
if (VIsual.col != VISUALLINE)
{
n = VIsual.col;
VIsual.col = curwin->w_cursor.col;
curwin->w_cursor.col = (int)n;
curwin->w_set_curswant = TRUE;
}
break;
}
CHECKCLEAROP;
if (u_save(curwin->w_cursor.lnum, (linenr_t)(curwin->w_cursor.lnum + 1)) &&
Opencmd(FORWARD, TRUE, TRUE))
{
startinsert('o', TRUE, Prenum1);
modified = TRUE;
command_busy = TRUE;
}
break;
case 'O':
CHECKCLEAROPQ;
if (u_save((linenr_t)(curwin->w_cursor.lnum - 1), curwin->w_cursor.lnum) && Opencmd(BACKWARD, TRUE, TRUE))
{
startinsert('O', TRUE, Prenum1);
modified = TRUE;
command_busy = TRUE;
}
break;
case 'R':
if (VIsual.lnum)
{
c = 'c';
VIsual.col = VISUALLINE;
goto dooperator;
}
CHECKCLEAROPQ;
if (u_save_cursor())
{
startinsert('R', FALSE, Prenum1);
modified = TRUE;
command_busy = TRUE;
}
break;
/*
* 7: Operators
*/
case '~': /* swap case */
/*
* if tilde is not an operator and Visual is off: swap case
* of a single character
*/
if (!p_to && !VIsual.lnum)
{
CHECKCLEAROPQ;
if (lineempty(curwin->w_cursor.lnum))
{
CLEAROPBEEP;
break;
}
prep_redo(Prenum, '~', NUL, NUL);
if (!u_save_cursor())
break;
for (; Prenum1 > 0; --Prenum1)
{
if (gchar_cursor() == NUL)
break;
swapchar(&curwin->w_cursor);
inc_cursor();
}
curwin->w_set_curswant = TRUE;
CHANGED;
updateline();
modified = TRUE;
break;
}
/*FALLTHROUGH*/
case 'd':
case 'c':
case 'y':
case '>':
case '<':
case '!':
case '=':
case 'Q':
dooperator:
n = STRCHR(opchars, c) - opchars + 1;
if (n == operator) /* double operator works on lines */
goto lineop;
CHECKCLEAROP;
if (Prenum != 0)
opnum = Prenum;
curbuf->b_startop = curwin->w_cursor;
operator = (int)n;
break;
/*
* 8: Abbreviations
*/
/* when Visual the next commands are operators */
case 'S':
case 'Y':
case 'D':
case 'C':
case 'x':
case 'X':
case 's':
if (VIsual.lnum)
{
static char_u trans[] = "ScYyDdCcxdXdsc";
if (isupper(c) && !Visual_block) /* uppercase means linewise */
VIsual.col = VISUALLINE;
c = *(STRCHR(trans, c) + 1);
goto dooperator;
}
case '&':
CHECKCLEAROPQ;
if (Prenum)
stuffnumReadbuff(Prenum);
if (c == 'Y' && p_ye)
c = 'Z';
{
static char_u *(ar[9]) = {(char_u *)"dl", (char_u *)"dh", (char_u *)"d$", (char_u *)"c$", (char_u *)"cl", (char_u *)"cc", (char_u *)"yy", (char_u *)"y$", (char_u *)":s\r"};
static char_u *str = (char_u *)"xXDCsSYZ&";
stuffReadbuff(ar[(int)(STRCHR(str, c) - str)]);
}
break;
/*
* 9: Marks
*/
case 'm':
CHECKCLEAROP;
if (setmark(nchar) == FAIL)
CLEAROPBEEP;
break;
case '\'':
flag = TRUE;
/* FALLTHROUGH */
case '`':
pos = getmark(nchar, (operator == NOP));
if (pos == (FPOS *)-1) /* jumped to other file */
{
if (flag)
beginline(TRUE);
break;
}
if (pos != NULL)
setpcmark();
cursormark:
if (pos == NULL || pos->lnum == 0)
CLEAROPBEEP;
else
{
curwin->w_cursor = *pos;
if (flag)
beginline(TRUE);
}
mtype = flag ? MLINE : MCHAR;
mincl = FALSE; /* ignored if not MCHAR */
curwin->w_set_curswant = TRUE;
break;
case Ctrl('O'): /* goto older pcmark */
Prenum1 = -Prenum1;
/* FALLTHROUGH */
case Ctrl('I'): /* goto newer pcmark */
CHECKCLEAROPQ;
pos = movemark((int)Prenum1);
if (pos == (FPOS *)-1) /* jump to other file */
{
curwin->w_set_curswant = TRUE;
break;
}
goto cursormark;
/*
* 10. Buffer setting
*/
case '"':
CHECKCLEAROP;
if (nchar != NUL && is_yank_buffer(nchar, FALSE))
{
yankbuffer = nchar;
opnum = Prenum; /* remember count before '"' */
}
else
CLEAROPBEEP;
break;
/*
* 11. Visual
*/
case 'v':
case 'V':
case Ctrl('V'):
CHECKCLEAROP;
Visual_block = FALSE;
/* stop Visual */
if (VIsual.lnum)
{
VIsual.lnum = 0;
updateScreen(NOT_VALID); /* delete the inversion */
}
/* start Visual */
else
{
if (!didwarn && set_highlight('v') == FAIL)/* cannot highlight */
{
EMSG("Warning: terminal cannot highlight");
didwarn = TRUE;
}
if (Prenum) /* use previously selected part */
{
if (!resel_Visual_type) /* there is none */
{
beep();
break;
}
VIsual = curwin->w_cursor;
if (resel_Visual_nlines > 1)
curwin->w_cursor.lnum += resel_Visual_nlines * Prenum - 1;
switch (resel_Visual_type)
{
case 'V': VIsual.col = VISUALLINE;
break;
case Ctrl('V'):
Visual_block = TRUE;
break;
case 'v':
if (resel_Visual_nlines <= 1)
curwin->w_cursor.col += resel_Visual_col * Prenum - 1;
else
curwin->w_cursor.col = resel_Visual_col;
break;
}
if (resel_Visual_col == MAXCOL)
{
curwin->w_curswant = MAXCOL;
coladvance(MAXCOL);
}
else if (Visual_block)
coladvance((colnr_t)(curwin->w_virtcol + resel_Visual_col * Prenum - 1));
curs_columns(TRUE); /* recompute w_virtcol */
updateScreen(NOT_VALID); /* show the inversion */
}
else
{
VIsual = curwin->w_cursor;
if (c == 'V') /* linewise */
VIsual.col = VISUALLINE;
else if (c == Ctrl('V')) /* blockwise */
Visual_block = TRUE;
updateline(); /* start the inversion */
}
}
break;
/*
* 12. Suspend
*/
case Ctrl('Z'):
CLEAROP;
VIsual.lnum = 0; /* stop Visual */
stuffReadbuff((char_u *)":st\r"); /* with autowrite */
break;
/*
* 13. Window commands
*/
case Ctrl('W'):
CHECKCLEAROP;
do_window(nchar, Prenum); /* everything is in window.c */
break;
/*
* 14. extended commands (starting with 'g')
*/
case 'g':
switch (nchar)
{
/*
* "gf": goto file, edit file under cursor
* "]f" and "[f": can also be used.
*/
case 'f':
gotofile:
ptr = file_name_at_cursor();
/* do autowrite if necessary */
if (curbuf->b_changed && curbuf->b_nwindows <= 1 && !p_hid)
autowrite(curbuf);
if (ptr != NULL)
{
setpcmark();
stuffReadbuff((char_u *) ":e ");
stuffReadbuff(ptr);
stuffReadbuff((char_u *) "\n");
free(ptr);
}
else
CLEAROPBEEP;
break;
/*
* "gs": goto sleep
*/
case 's': while (Prenum1-- && !got_int)
{
sleep(1);
breakcheck();
}
break;
default: CLEAROPBEEP;
break;
}
break;
/*
* The end
*/
case ESC:
if (VIsual.lnum)
{
VIsual.lnum = 0; /* stop Visual */
updateScreen(NOT_VALID);
CLEAROP; /* don't beep */
break;
}
/* Don't drop through and beep if we are canceling a command: */
else if (operator != NOP || opnum || Prenum || yankbuffer)
{
CLEAROP; /* don't beep */
break;
}
/* FALLTHROUGH */
default: /* not a known command */
CLEAROPBEEP;
break;
} /* end of switch on command character */
/*
* if we didn't start or finish an operator, reset yankbuffer, unless we
* need it later.
*/
if (!finish_op && !operator && strchr("\"DCYSsXx.", c) == NULL)
yankbuffer = 0;
/*
* If an operation is pending, handle it...
*/
if ((VIsual.lnum || finish_op) && operator != NOP)
{
if (operator != YANK && !VIsual.lnum) /* can't redo yank */
{
prep_redo(Prenum, opchars[operator - 1], c, nchar);
if (c == '/' || c == '?') /* was a search */
{
AppendToRedobuff(searchbuff);
AppendToRedobuff(NL_STR);
}
}
if (redo_Visual_busy)
{
curbuf->b_startop = curwin->w_cursor;
curwin->w_cursor.lnum += redo_Visual_nlines - 1;
switch (redo_Visual_type)
{
case 'V': VIsual.col = VISUALLINE;
break;
case Ctrl('V'):
Visual_block = TRUE;
break;
case 'v':
if (redo_Visual_nlines <= 1)
curwin->w_cursor.col += redo_Visual_col - 1;
else
curwin->w_cursor.col = redo_Visual_col;
break;
}
if (redo_Visual_col == MAXCOL)
{
curwin->w_curswant = MAXCOL;
coladvance(MAXCOL);
}
Prenum = redo_Visual_Prenum;
if (Prenum == 0)
Prenum1 = 1L;
else
Prenum1 = Prenum;
}
else if (VIsual.lnum)
curbuf->b_startop = VIsual;
if (lt(curbuf->b_startop, curwin->w_cursor))
{
curbuf->b_endop = curwin->w_cursor;
curwin->w_cursor = curbuf->b_startop;
}
else
{
curbuf->b_endop = curbuf->b_startop;
curbuf->b_startop = curwin->w_cursor;
}
nlines = curbuf->b_endop.lnum - curbuf->b_startop.lnum + 1;
if (VIsual.lnum || redo_Visual_busy)
{
if (Visual_block) /* block mode */
{
startvcol = getvcol(curwin, &(curbuf->b_startop), 2);
n = getvcol(curwin, &(curbuf->b_endop), 2);
if (n < startvcol)
startvcol = (colnr_t)n;
/* if '$' was used, get endvcol from longest line */
if (curwin->w_curswant == MAXCOL)
{
curwin->w_cursor.col = MAXCOL;
endvcol = 0;
for (curwin->w_cursor.lnum = curbuf->b_startop.lnum; curwin->w_cursor.lnum <= curbuf->b_endop.lnum; ++curwin->w_cursor.lnum)
if ((n = getvcol(curwin, &curwin->w_cursor, 3)) > endvcol)
endvcol = (colnr_t)n;
curwin->w_cursor = curbuf->b_startop;
}
else if (redo_Visual_busy)
endvcol = startvcol + redo_Visual_col - 1;
else
{
endvcol = getvcol(curwin, &(curbuf->b_startop), 3);
n = getvcol(curwin, &(curbuf->b_endop), 3);
if (n > endvcol)
endvcol = (colnr_t)n;
}
coladvance(startvcol);
}
/*
* prepare to reselect and redo Visual: this is based on the size
* of the Visual text
*/
if (Visual_block)
resel_Visual_type = Ctrl('V');
else if (VIsual.col == VISUALLINE)
resel_Visual_type = 'V';
else
resel_Visual_type = 'v';
if (curwin->w_curswant == MAXCOL)
resel_Visual_col = MAXCOL;
else if (Visual_block)
resel_Visual_col = endvcol - startvcol + 1;
else if (nlines > 1)
resel_Visual_col = curbuf->b_endop.col;
else
resel_Visual_col = curbuf->b_endop.col - curbuf->b_startop.col + 1;
resel_Visual_nlines = nlines;
if (operator != YANK && operator != COLON) /* can't redo yank and : */
{
prep_redo(0L, 'v', opchars[operator - 1], NUL);
redo_Visual_type = resel_Visual_type;
redo_Visual_col = resel_Visual_col;
redo_Visual_nlines = resel_Visual_nlines;
redo_Visual_Prenum = Prenum;
}
/*
* Mincl defaults to TRUE.
* If endop is on a NUL (empty line) mincl becomes FALSE
* This makes "d}P" and "v}dP" work the same.
*/
mincl = TRUE;
if (VIsual.col == VISUALLINE)
mtype = MLINE;
else
{
mtype = MCHAR;
if (*ml_get_pos(&(curbuf->b_endop)) == NUL)
mincl = FALSE;
}
redo_Visual_busy = FALSE;
/*
* Switch Visual off now, so screen updating does
* not show inverted text when the screen is redrawn.
* With YANK and sometimes with COLON and FILTER there is no screen
* redraw, so it is done here to remove the inverted part.
*/
VIsual.lnum = 0;
if (operator == YANK || operator == COLON || operator == FILTER)
updateScreen(NOT_VALID);
}
else if (operator == LSHIFT || operator == RSHIFT)
Prenum1 = 1L; /* if not visual mode: shift one indent */
curwin->w_set_curswant = 1;
/* no_op is set when start and end are the same */
no_op = (mtype == MCHAR && !mincl && equal(curbuf->b_startop, curbuf->b_endop));
/*
* If the end of an operator is in column one while mtype is MCHAR and mincl
* is FALSE, we put endop after the last character in the previous line.
* If startop is on or before the first non-blank in the line, the operator
* becomes linewise (strange, but that's the way vi does it).
*/
if (mtype == MCHAR && mincl == FALSE && curbuf->b_endop.col == 0 && nlines > 1)
{
--nlines;
--curbuf->b_endop.lnum;
if (inindent())
mtype = MLINE;
else
{
curbuf->b_endop.col = STRLEN(ml_get(curbuf->b_endop.lnum));
if (curbuf->b_endop.col)
{
--curbuf->b_endop.col;
mincl = TRUE;
}
}
}
switch (operator)
{
case LSHIFT:
case RSHIFT:
doshift(operator, TRUE, (int)Prenum1);
modified = TRUE;
break;
case DELETE:
if (!no_op)
{
dodelete();
modified = TRUE;
}
break;
case YANK:
if (!no_op)
(void)doyank(FALSE);
break;
case CHANGE:
dochange();
modified = TRUE;
command_busy = TRUE;
break;
case FILTER:
bangredo = TRUE; /* dobang() will put cmd in redo buffer */
case INDENT:
case COLON:
dofilter:
sprintf((char *)IObuff, ":%ld,%ld", (long)curbuf->b_startop.lnum, (long)curbuf->b_endop.lnum);
stuffReadbuff(IObuff);
if (operator != COLON)
stuffReadbuff((char_u *)"!");
if (operator == INDENT)
{
stuffReadbuff(p_ep);
stuffReadbuff((char_u *)"\n");
}
else if (operator == FORMAT)
{
stuffReadbuff(p_fp);
stuffReadbuff((char_u *)"\n");
}
/* docmdline() does the rest */
break;
case TILDE:
case UPPER:
case LOWER:
if (!no_op)
{
dotilde();
modified = TRUE;
}
break;
case FORMAT:
if (*p_fp != NUL)
goto dofilter; /* use external command */
doformat(); /* use internal function */
modified = TRUE;
break;
default:
CLEAROPBEEP;
}
operator = NOP;
Visual_block = FALSE;
yankbuffer = 0;
}
normal_end:
premsg(-1, NUL);
if (restart_edit && operator == NOP && VIsual.lnum == 0 && !command_busy && stuff_empty() && yankbuffer == 0)
{
startinsert(restart_edit, FALSE, 1L);
modified = TRUE;
}
checkpcmark(); /* check if we moved since setting pcmark */
/*
* TEMPORARY: update the other windows for the current buffer if modified
*/
if (modified)
{
WIN *wp;
for (wp = firstwin; wp; wp = wp->w_next)
if (wp != curwin && wp->w_buffer == curbuf)
{
cursor_off();
wp->w_redr_type = NOT_VALID;
win_update(wp);
}
}
}