/*
* Reflow lines from src grid into dst grid of width new_x. Returns number of
* lines fewer in the visible area. The source grid is destroyed.
*/
u_int
grid_reflow(struct grid *dst, struct grid *src, u_int new_x)
{
u_int py, sy, line;
int previous_wrapped;
struct grid_line *src_gl;
py = 0;
sy = src->sy;
previous_wrapped = 0;
for (line = 0; line < sy + src->hsize; line++) {
src_gl = src->linedata + line;
if (!previous_wrapped) {
/* Wasn't wrapped. If smaller, move to destination. */
if (src_gl->cellsize <= new_x)
grid_reflow_move(dst, &py, src_gl);
else
grid_reflow_split(dst, &py, src_gl, new_x, 0);
} else {
/* Previous was wrapped. Try to join. */
grid_reflow_join(dst, &py, src_gl, new_x);
}
previous_wrapped = src_gl->flags & GRID_LINE_WRAPPED;
}
grid_destroy(src);
if (py > sy)
return (0);
return (sy - py);
}
/* Reflow lines on grid to new width. */
void
grid_reflow(struct grid *gd, u_int sx)
{
struct grid *target;
struct grid_line *gl;
struct grid_cell gc;
u_int yy, width, i, at, first;
/*
* Create a destination grid. This is just used as a container for the
* line data and may not be fully valid.
*/
target = grid_create(gd->sx, 0, 0);
/*
* Loop over each source line.
*/
for (yy = 0; yy < gd->hsize + gd->sy; yy++) {
gl = &gd->linedata[yy];
if (gl->flags & GRID_LINE_DEAD)
continue;
/*
* Work out the width of this line. first is the width of the
* first character, at is the point at which the available
* width is hit, and width is the full line width.
*/
first = at = width = 0;
if (~gl->flags & GRID_LINE_EXTENDED) {
first = 1;
width = gl->cellused;
if (width > sx)
at = sx;
else
at = width;
} else {
for (i = 0; i < gl->cellused; i++) {
grid_get_cell1(gl, i, &gc);
if (i == 0)
first = gc.data.width;
if (at == 0 && width + gc.data.width > sx)
at = i;
width += gc.data.width;
}
}
/*
* If the line is exactly right or the first character is wider
* than the targe width, just move it across unchanged.
*/
if (width == sx || first > sx) {
grid_reflow_move(target, gl);
continue;
}
/*
* If the line is too big, it needs to be split, whether or not
* it was previously wrapped.
*/
if (width > sx) {
grid_reflow_split(target, gd, sx, yy, at);
continue;
}
/*
* If the line was previously wrapped, join as much as possible
* of the next line.
*/
if (gl->flags & GRID_LINE_WRAPPED)
grid_reflow_join(target, gd, sx, yy, width, 0);
else
grid_reflow_move(target, gl);
}
/*
* Replace the old grid with the new.
*/
if (target->sy < gd->sy)
grid_reflow_add(target, gd->sy - target->sy);
gd->hsize = target->sy - gd->sy;
if (gd->hscrolled > gd->hsize)
gd->hscrolled = gd->hsize;
free(gd->linedata);
gd->linedata = target->linedata;
free(target);
}
/* Join line below onto this one. */
static void
grid_reflow_join(struct grid *target, struct grid *gd, u_int sx, u_int yy,
u_int width, int already)
{
struct grid_line *gl, *from = NULL;
struct grid_cell gc;
u_int lines, left, i, to, line, want = 0;
u_int at;
int wrapped = 1;
/*
* Add a new target line.
*/
if (!already) {
to = target->sy;
gl = grid_reflow_move(target, &gd->linedata[yy]);
} else {
to = target->sy - 1;
gl = &target->linedata[to];
}
at = gl->cellused;
/*
* Loop until no more to consume or the target line is full.
*/
lines = 0;
for (;;) {
/*
* If this is now the last line, there is nothing more to be
* done.
*/
if (yy + 1 + lines == gd->hsize + gd->sy)
break;
line = yy + 1 + lines;
/* If the next line is empty, skip it. */
if (~gd->linedata[line].flags & GRID_LINE_WRAPPED)
wrapped = 0;
if (gd->linedata[line].cellused == 0) {
if (!wrapped)
break;
lines++;
continue;
}
/*
* Is the destination line now full? Copy the first character
* separately because we need to leave "from" set to the last
* line if this line is full.
*/
grid_get_cell1(&gd->linedata[line], 0, &gc);
if (width + gc.data.width > sx)
break;
width += gc.data.width;
grid_set_cell(target, at, to, &gc);
at++;
/* Join as much more as possible onto the current line. */
from = &gd->linedata[line];
for (want = 1; want < from->cellused; want++) {
grid_get_cell1(from, want, &gc);
if (width + gc.data.width > sx)
break;
width += gc.data.width;
grid_set_cell(target, at, to, &gc);
at++;
}
lines++;
/*
* If this line wasn't wrapped or we didn't consume the entire
* line, don't try to join any further lines.
*/
if (!wrapped || want != from->cellused || width == sx)
break;
}
if (lines == 0)
return;
/*
* If we didn't consume the entire final line, then remove what we did
* consume. If we consumed the entire line and it wasn't wrapped,
* remove the wrap flag from this line.
*/
left = from->cellused - want;
if (left != 0) {
grid_move_cells(gd, 0, want, yy + lines, left, 8);
from->cellsize = from->cellused = left;
lines--;
} else if (!wrapped)
gl->flags &= ~GRID_LINE_WRAPPED;
/* Remove the lines that were completely consumed. */
for (i = yy + 1; i < yy + 1 + lines; i++) {
free(gd->linedata[i].celldata);
free(gd->linedata[i].extddata);
grid_reflow_dead(&gd->linedata[i]);
}
/* Adjust scroll position. */
if (gd->hscrolled > to + lines)
gd->hscrolled -= lines;
else if (gd->hscrolled > to)
gd->hscrolled = to;
}
/* Reflow lines on grid to new width. */
void
grid_reflow(struct grid *gd, u_int sx, u_int *cursor)
{
struct grid *target;
struct grid_line *gl;
struct grid_cell gc;
u_int yy, cy, width, i, at, first;
struct timeval start, tv;
gettimeofday(&start, NULL);
log_debug("%s: %u lines, new width %u", __func__, gd->hsize + gd->sy,
sx);
cy = gd->hsize + (*cursor);
/*
* Create a destination grid. This is just used as a container for the
* line data and may not be fully valid.
*/
target = grid_create(gd->sx, 0, 0);
/*
* Loop over each source line.
*/
for (yy = 0; yy < gd->hsize + gd->sy; yy++) {
gl = &gd->linedata[yy];
if (gl->flags & GRID_LINE_DEAD)
continue;
/*
* Work out the width of this line. first is the width of the
* first character, at is the point at which the available
* width is hit, and width is the full line width.
*/
first = at = width = 0;
if (~gl->flags & GRID_LINE_EXTENDED) {
first = 1;
width = gl->cellused;
if (width > sx)
at = sx;
else
at = width;
} else {
for (i = 0; i < gl->cellused; i++) {
grid_get_cell1(gl, i, &gc);
if (i == 0)
first = gc.data.width;
if (at == 0 && width + gc.data.width > sx)
at = i;
width += gc.data.width;
}
}
/*
* If the line is exactly right or the first character is wider
* than the targe width, just move it across unchanged.
*/
if (width == sx || first > sx) {
grid_reflow_move(target, gl);
continue;
}
/*
* If the line is too big, it needs to be split, whether or not
* it was previously wrapped.
*/
if (width > sx) {
grid_reflow_split(target, gd, sx, yy, at, &cy);
continue;
}
/*
* If the line was previously wrapped, join as much as possible
* of the next line.
*/
if (gl->flags & GRID_LINE_WRAPPED)
grid_reflow_join(target, gd, sx, yy, width, &cy, 0);
else
grid_reflow_move(target, gl);
}
/*
* Replace the old grid with the new.
*/
if (target->sy < gd->sy)
grid_reflow_add(target, gd->sy - target->sy);
gd->hsize = target->sy - gd->sy;
free(gd->linedata);
gd->linedata = target->linedata;
free(target);
/*
* Update scrolled and cursor positions.
*/
if (gd->hscrolled > gd->hsize)
gd->hscrolled = gd->hsize;
if (cy < gd->hsize)
*cursor = 0;
else
*cursor = cy - gd->hsize;
gettimeofday(&tv, NULL);
timersub(&tv, &start, &tv);
log_debug("%s: now %u lines (in %llu.%06u seconds)", __func__,
gd->hsize + gd->sy, (unsigned long long)tv.tv_sec,
(u_int)tv.tv_usec);
}
