예제 #1
0
static authz_status group_check_authorization(request_rec *r,
                                              const char *require_args,
                                              const void *parsed_require_args)
{
    authz_groupfile_config_rec *conf = ap_get_module_config(r->per_dir_config,
            &authz_groupfile_module);
    char *user = r->user;
    const char *t, *w;
    apr_table_t *grpstatus = NULL;
    apr_status_t status;

    if (!user) {
        return AUTHZ_DENIED_NO_USER;
    }

    /* If there is no group file - then we are not
     * configured. So decline.
     */
    if (!(conf->groupfile)) {
        ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(01664)
                        "No group file was specified in the configuration");
        return AUTHZ_DENIED;
    }

    status = groups_for_user(r->pool, user, conf->groupfile,
                                &grpstatus);

    if (status != APR_SUCCESS) {
        ap_log_rerror(APLOG_MARK, APLOG_ERR, status, r, APLOGNO(01665)
                        "Could not open group file: %s",
                        conf->groupfile);
        return AUTHZ_DENIED;
    }

    if (apr_is_empty_table(grpstatus)) {
        /* no groups available, so exit immediately */
        ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(01666)
                      "Authorization of user %s to access %s failed, reason: "
                      "user doesn't appear in group file (%s).",
                      r->user, r->uri, conf->groupfile);
        return AUTHZ_DENIED;
    }

    t = require_args;
    while ((w = ap_getword_conf(r->pool, &t)) && w[0]) {
        if (apr_table_get(grpstatus, w)) {
            return AUTHZ_GRANTED;
        }
    }

    ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(01667)
                    "Authorization of user %s to access %s failed, reason: "
                    "user is not part of the 'require'ed group(s).",
                    r->user, r->uri);

    return AUTHZ_DENIED;
}
예제 #2
0
static authz_status filegroup_check_authorization(request_rec *r,
                                                  const char *require_args,
                                                  const void *parsed_require_args)
{
    authz_groupfile_config_rec *conf = ap_get_module_config(r->per_dir_config,
            &authz_groupfile_module);
    char *user = r->user;
    apr_table_t *grpstatus = NULL;
    apr_status_t status;
    const char *filegroup = NULL;

    if (!user) {
        return AUTHZ_DENIED_NO_USER;
    }

    /* If there is no group file - then we are not
     * configured. So decline.
     */
    if (!(conf->groupfile)) {
        ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(01668)
                        "No group file was specified in the configuration");
        return AUTHZ_DENIED;
    }

    status = groups_for_user(r->pool, user, conf->groupfile,
                             &grpstatus);
    if (status != APR_SUCCESS) {
        ap_log_rerror(APLOG_MARK, APLOG_ERR, status, r, APLOGNO(01669)
                      "Could not open group file: %s",
                      conf->groupfile);
        return AUTHZ_DENIED;
    }

    if (apr_is_empty_table(grpstatus)) {
        /* no groups available, so exit immediately */
        ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(01670)
                        "Authorization of user %s to access %s failed, reason: "
                        "user doesn't appear in group file (%s).",
                        r->user, r->uri, conf->groupfile);
        return AUTHZ_DENIED;
    }

    filegroup = authz_owner_get_file_group(r);

    if (filegroup) {
        if (apr_table_get(grpstatus, filegroup)) {
            return AUTHZ_GRANTED;
        }
    }
    else {
        /* No need to emit a error log entry because the call
        to authz_owner_get_file_group already did it
        for us.
        */
        return AUTHZ_DENIED;
    }

    ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(01671)
                  "Authorization of user %s to access %s failed, reason: "
                  "user is not part of the 'require'ed file group.",
                  r->user, r->uri);

    return AUTHZ_DENIED;
}
예제 #3
0
파일: mod_auth.c 프로젝트: AzerTyQsdF/osx
static int check_user_access(request_rec *r)
{
    auth_config_rec *sec =
    (auth_config_rec *) ap_get_module_config(r->per_dir_config, &auth_module);
    char *user = r->connection->user;
    int m = r->method_number;
    int method_restricted = 0;
    register int x;
    const char *t, *w;
    table *grpstatus;
    const array_header *reqs_arr = ap_requires(r);
    require_line *reqs;

    /* BUG FIX: tadc, 11-Nov-1995.  If there is no "requires" directive, 
     * then any user will do.
     */
    if (reqs_arr == NULL) {
	return (OK);
    }
    reqs = (require_line *) reqs_arr->elts;

    if (sec->auth_grpfile) {
	grpstatus = groups_for_user(r->pool, user, sec->auth_grpfile);
    }
    else {
	grpstatus = NULL;
    }

    for (x = 0; x < reqs_arr->nelts; x++) {

        if (! (reqs[x].method_mask & (1 << m))) {
            continue;
        }

	method_restricted = 1;

	t = reqs[x].requirement;
	w = ap_getword_white(r->pool, &t);
	if (strcmp(w, "valid-user") == 0) {
	    return OK;
        }
        /*
         * If requested, allow access if the user is valid and the
         * owner of the document.
         */
	if (strcmp(w, "file-owner") == 0) {
#if defined(WIN32) || defined(NETWARE) || defined(OS2)
            ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_INFO, r,
                          "'Require file-owner' not supported "
                          "on this platform, ignored");
            continue;
#else
            struct passwd *pwent;
            ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_DEBUG, r,
                          "checking for 'owner' access for file '%s'",
                          r->filename);
            if (r->finfo.st_ino == 0) {
                ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_DEBUG, r,
                              "no stat info for '%s'", r->filename);
                continue;
            }
            pwent = getpwuid(r->finfo.st_uid);
            if (pwent == NULL) {
                ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_DEBUG, r,
                              "no username for UID %d (owner of '%s')",
                              r->finfo.st_uid, r->filename);
            }
            else {
                ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_DEBUG, r,
                              "checking authenticated user '%s' "
                              "against owner '%s' of '%s'",
                              user, pwent->pw_name, r->filename);
                if (strcmp(user, pwent->pw_name) == 0) {
                    return OK;
                }
                else {
                    continue;
                }
            }
#endif
        }
	if (strcmp(w, "file-group") == 0) {
#if defined(WIN32) || defined(NETWARE) || defined(OS2)
            ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_INFO, r,
                          "'Require file-group' not supported "
                          "on this platform, ignored");
            continue;
#else
            struct group *grent;
            if (sec->auth_grpfile == NULL) {
                ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_INFO, r,
                              "no AuthGroupFile, so 'file-group' "
                              "requirement cannot succeed for file '%s'",
                              r->filename);
                continue;
            }
            if (grpstatus == NULL) {
                ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_WARNING, r,
                              "authenticated user '%s' not a member of "
                              "any groups, so 'file-group' requirement "
                              "cannot succeed for file '%s'",
                              user, r->filename);
                continue;
            }
            ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_DEBUG, r,
                          "checking for 'group' access for file '%s'",
                          r->filename);
            if (r->finfo.st_ino == 0) {
                ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_DEBUG, r,
                              "no stat info for '%s'", r->filename);
                continue;
            }
            grent = getgrgid(r->finfo.st_gid);
            if (grent == NULL) {
                ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_DEBUG, r,
                              "no group name for GID %d (owner of '%s')",
                              r->finfo.st_gid, r->filename);
            }
            else {
                ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_DEBUG, r,
                              "checking groups of authenticated user '%s' "
                              "against owner group '%s' of '%s'",
                              user, grent->gr_name, r->filename);
                if (ap_table_get(grpstatus, grent->gr_name) != NULL) {
                    return OK;
                }
                else {
                    continue;
                }
            }
#endif
        }
	if (strcmp(w, "user") == 0) {
	    while (t[0] != '\0') {
		w = ap_getword_conf(r->pool, &t);
		if (strcmp(user, w) == 0) {
		    return OK;
                }
	    }
	}
	else if (strcmp(w, "group") == 0) {
	    if (grpstatus == NULL) {
		return DECLINED;	/* DBM group?  Something else? */
            }

	    while (t[0]) {
		w = ap_getword_conf(r->pool, &t);
		if (ap_table_get(grpstatus, w)) {
		    return OK;
                }
	    }
	}
        else if (sec->auth_authoritative) {
	    /* if we aren't authoritative, any require directive could be
	     * valid even if we don't grok it.  However, if we are 
	     * authoritative, we can warn the user they did something wrong.
	     * That something could be a missing "AuthAuthoritative off", but
	     * more likely is a typo in the require directive.
	     */
	    ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_ERR, r,
                          "access to %s failed, "
                          "reason: unknown require directive:"
                          "\"%s\"", r->uri, reqs[x].requirement);
	}
    }

    if (! method_restricted) {
	return OK;
    }

    if (! sec->auth_authoritative) {
	return DECLINED;
    }

    ap_log_rerror(APLOG_MARK, APLOG_NOERRNO|APLOG_ERR, r,
                  "access to %s failed, reason: user %s not allowed access",
                  r->uri, user);
	
    ap_note_basic_auth_failure(r);
    return AUTH_REQUIRED;
}
예제 #4
0
static int check_user_access(request_rec *r)
{
    auth_config_rec *conf = ap_get_module_config(r->per_dir_config,
                                                 &auth_module);
    char *user = r->user;
    int m = r->method_number;
    int method_restricted = 0;
    register int x;
    const char *t, *w;
    apr_table_t *grpstatus;
    const apr_array_header_t *reqs_arr = ap_requires(r);
    require_line *reqs;

    /* BUG FIX: tadc, 11-Nov-1995.  If there is no "requires" directive, 
     * then any user will do.
     */
    if (!reqs_arr) {
        return OK;
    }
    reqs = (require_line *)reqs_arr->elts;

    if (conf->auth_grpfile) {
        grpstatus = groups_for_user(r, user, conf->auth_grpfile);
    }
    else {
        grpstatus = NULL;
    }

    for (x = 0; x < reqs_arr->nelts; x++) {

        if (!(reqs[x].method_mask & (AP_METHOD_BIT << m))) {
            continue;
        }

        method_restricted = 1;

        t = reqs[x].requirement;
        w = ap_getword_white(r->pool, &t);
        if (!strcmp(w, "valid-user")) {
            return OK;
        }
        if (!strcmp(w, "user")) {
            while (t[0]) {
                w = ap_getword_conf(r->pool, &t);
                if (!strcmp(user, w)) {
                    return OK;
                }
            }
        }
        else if (!strcmp(w, "group")) {
            if (!grpstatus) {
                return DECLINED;        /* DBM group?  Something else? */
            }

            while (t[0]) {
                w = ap_getword_conf(r->pool, &t);
                if (apr_table_get(grpstatus, w)) {
                    return OK;
                }
            }
        }
        else if (conf->auth_authoritative) {
            /* if we aren't authoritative, any require directive could be
             * valid even if we don't grok it.  However, if we are 
             * authoritative, we can warn the user they did something wrong.
             * That something could be a missing "AuthAuthoritative off", but
             * more likely is a typo in the require directive.
             */
            ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r,
                          "access to %s failed, reason: unknown require "
                          "directive:\"%s\"", r->uri, reqs[x].requirement);
        }
    }

    if (!method_restricted) {
        return OK;
    }

    if (!(conf->auth_authoritative)) {
        return DECLINED;
    }

    ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r,
                  "access to %s failed, reason: user %s not allowed access",
                  r->uri, user);
        
    ap_note_basic_auth_failure(r);
    return HTTP_UNAUTHORIZED;
}