static void logi_dj_remove(struct hid_device *hdev) { struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); struct dj_device *dj_dev; int i; dbg_hid("%s\n", __func__); cancel_work_sync(&djrcv_dev->work); hid_hw_close(hdev); hid_hw_stop(hdev); /* I suppose that at this point the only context that can access * the djrecv_data is this thread as the work item is guaranteed to * have finished and no more raw_event callbacks should arrive after * the remove callback was triggered so no locks are put around the * code below */ for (i = 0; i < (DJ_MAX_PAIRED_DEVICES + DJ_DEVICE_INDEX_MIN); i++) { dj_dev = djrcv_dev->paired_dj_devices[i]; if (dj_dev != NULL) { hid_destroy_device(dj_dev->hdev); kfree(dj_dev); djrcv_dev->paired_dj_devices[i] = NULL; } } kfifo_free(&djrcv_dev->notif_fifo); kfree(djrcv_dev); hid_set_drvdata(hdev, NULL); }
static void picolcd_remove(struct hid_device *hdev) { struct picolcd_data *data = hid_get_drvdata(hdev); unsigned long flags; dbg_hid(PICOLCD_NAME " hardware remove...\n"); spin_lock_irqsave(&data->lock, flags); data->status |= PICOLCD_FAILED; spin_unlock_irqrestore(&data->lock, flags); picolcd_exit_devfs(data); device_remove_file(&hdev->dev, &dev_attr_operation_mode); device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); hid_hw_close(hdev); hid_hw_stop(hdev); /* Shortcut potential pending reply that will never arrive */ spin_lock_irqsave(&data->lock, flags); if (data->pending) complete(&data->pending->ready); spin_unlock_irqrestore(&data->lock, flags); /* Cleanup LED */ picolcd_exit_leds(data); /* Clean up the framebuffer */ picolcd_exit_backlight(data); picolcd_exit_lcd(data); picolcd_exit_framebuffer(data); /* Cleanup input */ picolcd_exit_cir(data); picolcd_exit_keys(data); hid_set_drvdata(hdev, NULL); mutex_destroy(&data->mutex); /* Finally, clean up the picolcd data itself */ kfree(data); }
static int logi_dj_probe(struct hid_device *hdev, const struct hid_device_id *id) { struct usb_interface *intf = to_usb_interface(hdev->dev.parent); struct dj_receiver_dev *djrcv_dev; int retval; if (is_dj_device((struct dj_device *)hdev->driver_data)) return -ENODEV; dbg_hid("%s called for ifnum %d\n", __func__, intf->cur_altsetting->desc.bInterfaceNumber); /* Ignore interfaces 0 and 1, they will not carry any data, dont create * any hid_device for them */ if (intf->cur_altsetting->desc.bInterfaceNumber != LOGITECH_DJ_INTERFACE_NUMBER) { dbg_hid("%s: ignoring ifnum %d\n", __func__, intf->cur_altsetting->desc.bInterfaceNumber); return -ENODEV; } /* Treat interface 2 */ djrcv_dev = kzalloc(sizeof(struct dj_receiver_dev), GFP_KERNEL); if (!djrcv_dev) { dev_err(&hdev->dev, "%s:failed allocating dj_receiver_dev\n", __func__); return -ENOMEM; } djrcv_dev->hdev = hdev; INIT_WORK(&djrcv_dev->work, delayedwork_callback); spin_lock_init(&djrcv_dev->lock); if (kfifo_alloc(&djrcv_dev->notif_fifo, DJ_MAX_NUMBER_NOTIFICATIONS * sizeof(struct dj_report), GFP_KERNEL)) { dev_err(&hdev->dev, "%s:failed allocating notif_fifo\n", __func__); kfree(djrcv_dev); return -ENOMEM; } hid_set_drvdata(hdev, djrcv_dev); /* Call to usbhid to fetch the HID descriptors of interface 2 and * subsequently call to the hid/hid-core to parse the fetched * descriptors, this will in turn create the hidraw and hiddev nodes * for interface 2 of the receiver */ retval = hid_parse(hdev); if (retval) { dev_err(&hdev->dev, "%s:parse of interface 2 failed\n", __func__); goto hid_parse_fail; } if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, REPORT_ID_DJ_SHORT, 0, DJREPORT_SHORT_LENGTH - 1)) { retval = -ENODEV; goto hid_parse_fail; } /* Starts the usb device and connects to upper interfaces hiddev and * hidraw */ retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT); if (retval) { dev_err(&hdev->dev, "%s:hid_hw_start returned error\n", __func__); goto hid_hw_start_fail; } retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); if (retval < 0) { dev_err(&hdev->dev, "%s:logi_dj_recv_switch_to_dj_mode returned error:%d\n", __func__, retval); goto switch_to_dj_mode_fail; } /* This is enabling the polling urb on the IN endpoint */ retval = hid_hw_open(hdev); if (retval < 0) { dev_err(&hdev->dev, "%s:hid_hw_open returned error:%d\n", __func__, retval); goto llopen_failed; } /* Allow incoming packets to arrive: */ hid_device_io_start(hdev); retval = logi_dj_recv_query_paired_devices(djrcv_dev); if (retval < 0) { dev_err(&hdev->dev, "%s:logi_dj_recv_query_paired_devices " "error:%d\n", __func__, retval); goto logi_dj_recv_query_paired_devices_failed; } return retval; logi_dj_recv_query_paired_devices_failed: hid_hw_close(hdev); llopen_failed: switch_to_dj_mode_fail: hid_hw_stop(hdev); hid_hw_start_fail: hid_parse_fail: kfifo_free(&djrcv_dev->notif_fifo); kfree(djrcv_dev); hid_set_drvdata(hdev, NULL); return retval; }
static void wiimote_input_close(struct input_dev *dev) { struct wiimote_data *wdata = input_get_drvdata(dev); hid_hw_close(wdata->hdev); }
static void ax_remove(struct hid_device *hdev) { hid_hw_close(hdev); hid_hw_stop(hdev); }
static int picolcd_probe(struct hid_device *hdev, const struct hid_device_id *id) { struct picolcd_data *data; int error = -ENOMEM; dbg_hid(PICOLCD_NAME " hardware probe...\n"); /* * Let's allocate the picolcd data structure, set some reasonable * defaults, and associate it with the device */ data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL); if (data == NULL) { hid_err(hdev, "can't allocate space for Minibox PicoLCD device data\n"); error = -ENOMEM; goto err_no_cleanup; } spin_lock_init(&data->lock); mutex_init(&data->mutex); data->hdev = hdev; data->opmode_delay = 5000; if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) data->status |= PICOLCD_BOOTLOADER; hid_set_drvdata(hdev, data); /* Parse the device reports and start it up */ error = hid_parse(hdev); if (error) { hid_err(hdev, "device report parse failed\n"); goto err_cleanup_data; } error = hid_hw_start(hdev, 0); if (error) { hid_err(hdev, "hardware start failed\n"); goto err_cleanup_data; } error = hid_hw_open(hdev); if (error) { hid_err(hdev, "failed to open input interrupt pipe for key and IR events\n"); goto err_cleanup_hid_hw; } error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay); if (error) { hid_err(hdev, "failed to create sysfs attributes\n"); goto err_cleanup_hid_ll; } error = device_create_file(&hdev->dev, &dev_attr_operation_mode); if (error) { hid_err(hdev, "failed to create sysfs attributes\n"); goto err_cleanup_sysfs1; } if (data->status & PICOLCD_BOOTLOADER) error = picolcd_probe_bootloader(hdev, data); else error = picolcd_probe_lcd(hdev, data); if (error) goto err_cleanup_sysfs2; dbg_hid(PICOLCD_NAME " activated and initialized\n"); return 0; err_cleanup_sysfs2: device_remove_file(&hdev->dev, &dev_attr_operation_mode); err_cleanup_sysfs1: device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); err_cleanup_hid_ll: hid_hw_close(hdev); err_cleanup_hid_hw: hid_hw_stop(hdev); err_cleanup_data: kfree(data); err_no_cleanup: hid_set_drvdata(hdev, NULL); return error; }
static void udraw_close(struct input_dev *dev) { struct udraw *udraw = input_get_drvdata(dev); hid_hw_close(udraw->hdev); }