C++ (Cpp) imx25_iim_register_fec_ethaddr 예제들

예제 #1

파일: 3stack.c 프로젝트: AubrCool/barebox

static int imx25_3ds_devices_init(void)
{
#ifdef CONFIG_USB
	/* USB does not work yet. Don't know why. Maybe
	 * the CPLD has to be initialized.
	 */
	imx25_usb_init();
	add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX25_USB_OTG_BASE_ADDR + 0x400, NULL);
#endif

	imx25_iim_register_fec_ethaddr();
	imx25_add_fec(&fec_info);

	add_mem_device("sram0", 0x78000000, 128 * 1024, IORESOURCE_MEM_WRITEABLE);

	if (readl(MX25_CCM_BASE_ADDR + MX25_CCM_RCSR) & (1 << 14))
		nand_info.width = 2;

	imx25_add_nand(&nand_info);

	devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");

	devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");

	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
	imx25_add_i2c0(NULL);

	armlinux_set_architecture(MACH_TYPE_MX25_3DS);
	armlinux_set_serial(imx_uid());

	return 0;
}

예제 #2

파일: board.c 프로젝트: AshishNamdev/barebox

static int tx25_devices_init(void)
{
	gpio_fec_active();

	imx25_iim_register_fec_ethaddr();
	imx25_add_fec(&fec_info);

	if (readl(MX25_CCM_BASE_ADDR + MX25_CCM_RCSR) & (1 << 14))
		nand_info.width = 2;

	imx25_add_nand(&nand_info);

	devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");

	devfs_add_partition("nand0", SZ_512K, SZ_512K, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");

	add_mem_device("sram0", 0x78000000, 128 * 1024,
				   IORESOURCE_MEM_WRITEABLE);

	armlinux_set_bootparams((void *)0x80000100);
	armlinux_set_architecture(MACH_TYPE_TX25);
	armlinux_set_serial(imx_uid());

	return 0;
}

예제 #3

파일: eukrea_cpuimx25.c 프로젝트: RobertCNelson/barebox-boards

static int eukrea_cpuimx25_devices_init(void)
{
    mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
                                     ARRAY_SIZE(eukrea_cpuimx25_pads));

    led_gpio_register(&led0);

    imx25_iim_register_fec_ethaddr();
    imx25_add_fec(&fec_info);

    nand_info.width = 1;
    imx25_add_nand(&nand_info);

    devfs_add_partition("nand0", 0x00000, 0x40000,
                        DEVFS_PARTITION_FIXED, "self_raw");
    dev_add_bb_dev("self_raw", "self0");

    devfs_add_partition("nand0", 0x40000, 0x20000,
                        DEVFS_PARTITION_FIXED, "env_raw");
    dev_add_bb_dev("env_raw", "env0");

    /* enable LCD */
    gpio_direction_output(26, 1);
    gpio_set_value(26, 1);

    /* LED : default OFF */
    gpio_direction_output(2 * 32 + 19, 1);

    /* Switch : input */
    gpio_direction_input(2 * 32 + 18);

    imx25_add_fb(&eukrea_cpuimx25_fb_data);

    imx25_add_i2c0(NULL);
    imx25_add_mmc0(NULL);

#ifdef CONFIG_USB
    imx25_usb_init();
    add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX25_USB_OTG_BASE_ADDR + 0x400, NULL);
#endif
#ifdef CONFIG_USB_GADGET
    /* Workaround ENGcm09152 */
    writel(readl(MX25_USB_OTG_BASE_ADDR + 0x608) | (1 << 23), MX25_USB_OTG_BASE_ADDR + 0x608);
    add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX25_USB_OTG_BASE_ADDR, 0x200,
                       IORESOURCE_MEM, &usb_pdata);
#endif

    armlinux_set_bootparams((void *)0x80000100);
    armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX25SD);

    return 0;
}

예제 #4

파일: board.c 프로젝트: cpdesign/barebox

static int tx25_devices_init(void)
{
	gpio_fec_active();

	imx25_iim_register_fec_ethaddr();
	imx25_add_fec(&fec_info);

	if (readl(IMX_CCM_BASE + CCM_RCSR) & (1 << 14))
		nand_info.width = 2;

	imx25_add_nand(&nand_info);

	devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");

	devfs_add_partition("nand0", 0x40000, 0x80000, PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");

	armlinux_set_bootparams((void *)0x80000100);
	armlinux_set_architecture(MACH_TYPE_TX25);
	armlinux_set_serial(imx_uid());

	return 0;
}