C++ (Cpp) imx53_iim_register_fec_ethaddr 예제들

예제 #1

파일: board.c 프로젝트: cherojeong/barebox

static int smd_devices_init(void)
{
	imx53_iim_register_fec_ethaddr();
	imx53_add_fec(&fec_info);
	imx53_add_mmc0(&loco_sd1_data);
	imx53_add_mmc2(&loco_sd3_data);

	smd_fec_reset();

	armlinux_set_architecture(MACH_TYPE_MX53_SMD);

	return 0;
}

예제 #2

파일: board.c 프로젝트: Jokymon/barebox

static int tqma53_devices_init(void)
{
	gpio_direction_output(GPIO_FEC_NRESET, 0);
	mdelay(1);
	gpio_set_value(GPIO_FEC_NRESET, 1);

	imx53_iim_register_fec_ethaddr();
	imx53_add_fec(&fec_info);
	imx53_add_mmc1(&tqma53_sd2_data);
	imx53_add_mmc2(&tqma53_sd3_data);

	armlinux_set_bootparams((void *)0x70000100);
	armlinux_set_architecture(MACH_TYPE_TQMA53);

	return 0;
}

예제 #3

파일: board.c 프로젝트: AshishNamdev/barebox

static int tx53_devices_init(void)
{
	imx53_iim_register_fec_ethaddr();
	tx53_fec_init();
	imx53_add_fec(&fec_info);
	imx53_add_mmc0(&tx53_sd1_data);
	imx53_add_nand(&nand_info);

	armlinux_set_bootparams((void *)0x70000100);
	armlinux_set_architecture(MACH_TYPE_TX53);

	/* rev xx30 can boot from nand or USB */
	imx53_bbu_internal_nand_register_handler("nand-xx30",
		BBU_HANDLER_FLAG_DEFAULT, (void *)dcd_entry_xx30,
		sizeof(dcd_entry_xx30), SZ_512K, 0);

	/* rev 1011 can boot from MMC/SD, other bootsource currently unknown */
	imx53_bbu_internal_mmc_register_handler("mmc-1011", "/dev/disk0",
		0, (void *)dcd_entry_1011, sizeof(dcd_entry_1011), 0);

	return 0;
}

예제 #4

파일: board.c 프로젝트: Reggi3/mini210s-barebox

static int loco_devices_init(void)
{

	imx53_iim_register_fec_ethaddr();
	loco_fec_reset();
	imx53_add_fec(&fec_info);
	imx53_add_mmc0(&loco_sd1_data);
	imx53_add_mmc2(&loco_sd3_data);
	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
	imx53_add_i2c0(NULL);

	if (IS_ENABLED(CONFIG_USB_EHCI))
		loco_ehci_init();

	set_silicon_rev(imx_silicon_revision());

	armlinux_set_bootparams((void *)0x70000100);
	armlinux_set_architecture(MACH_TYPE_MX53_LOCO);

	imx53_bbu_internal_mmc_register_handler("mmc", "/dev/disk0",
		BBU_HANDLER_FLAG_DEFAULT, dcd_entry, sizeof(dcd_entry), 0);

	return 0;
}