예제 #1
0
/*
 * Attempt to read a disk label from a device
 * using the indicated strategy routine.
 * The label must be partly set up before this:
 * secpercyl, secsize and anything required for a block i/o read
 * operation in the driver's strategy/start routines
 * must be filled in before calling us.
 *
 * If dos partition table requested, attempt to load it and
 * find disklabel inside a DOS partition.
 *
 * We would like to check if each MBR has a valid DOSMBR_SIGNATURE, but
 * we cannot because it doesn't always exist. So.. we assume the
 * MBR is valid.
 */
int
readdisklabel(dev_t dev, void (*strat)(struct buf *),
    struct disklabel *lp, int spoofonly)
{
	bios_diskinfo_t *pdi;
	struct buf *bp = NULL;
	dev_t devno;
	int error;

	if ((error = initdisklabel(lp)))
		goto done;

	/* Look for any BIOS geometry information we should honour. */
	devno = chrtoblk(dev);
	if (devno == NODEV)
		devno = dev;
	pdi = bios_getdiskinfo(MAKEBOOTDEV(major(devno), 0, 0, DISKUNIT(devno),
	    RAW_PART));
	if (pdi != NULL && pdi->bios_heads > 0 && pdi->bios_sectors > 0) {
#ifdef DEBUG
		printf("Disk GEOM %u/%u/%u -> BIOS GEOM %u/%u/%u\n",
		    lp->d_ntracks, lp->d_nsectors, lp->d_ncylinders,
		    pdi->bios_heads, pdi->bios_sectors,
		    DL_GETDSIZE(lp) / (pdi->bios_heads * pdi->bios_sectors));
#endif
		lp->d_ntracks = pdi->bios_heads;
		lp->d_nsectors = pdi->bios_sectors;
		lp->d_secpercyl = pdi->bios_sectors * pdi->bios_heads;
		lp->d_ncylinders = DL_GETDSIZE(lp) / lp->d_secpercyl;
	}

	/* get a buffer and initialize it */
	bp = geteblk((int)lp->d_secsize);
	bp->b_dev = dev;

	error = readdoslabel(bp, strat, lp, NULL, spoofonly);
	if (error == 0)
		goto done;

#if defined(CD9660)
	error = iso_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif
#if defined(UDF)
	error = udf_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif

done:
	if (bp) {
		bp->b_flags |= B_INVAL;
		brelse(bp);
	}
	disk_change = 1;
	return (error);
}
예제 #2
0
/*
 * Attempt to read a disk label from a device
 * using the indicated strategy routine.
 * The label must be partly set up before this:
 * secpercyl, secsize and anything required for a block i/o read
 * operation in the driver's strategy/start routines
 * must be filled in before calling us.
 */
int
readdisklabel(dev_t dev, void (*strat)(struct buf *),
    struct disklabel *lp, int spoofonly)
{
	struct buf *bp = NULL;
	int error;

	if ((error = initdisklabel(lp)))
		goto done;

	/* get a buffer and initialize it */
	bp = geteblk((int)lp->d_secsize);
	bp->b_dev = dev;

	if (spoofonly)
		goto doslabel;

	bp->b_blkno = LABELSECTOR;
	bp->b_bcount = lp->d_secsize;
	CLR(bp->b_flags, B_READ | B_WRITE | B_DONE);
	SET(bp->b_flags, B_BUSY | B_READ | B_RAW);
	(*strat)(bp);
	if (biowait(bp)) {
		error = bp->b_error;
		goto done;
	}

	error = checkdisklabel(bp->b_data + LABELOFFSET, lp, 0,
	    DL_GETDSIZE(lp));
	if (error == 0)
		goto done;

doslabel:
	error = readdoslabel(bp, strat, lp, NULL, spoofonly);
	if (error == 0)
		goto done;

#if defined(CD9660)
	error = iso_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif
#if defined(UDF)
	error = udf_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif

done:
	if (bp) {
		bp->b_flags |= B_INVAL;
		brelse(bp);
	}
	disk_change = 1;
	return (error);
}
예제 #3
0
/*
 * Attempt to read a disk label from a device
 * using the indicated strategy routine.
 * The label must be partly set up before this:
 * secpercyl, secsize and anything required for a block i/o read
 * operation in the driver's strategy/start routines
 * must be filled in before calling us.
 */
int
readdisklabel(dev_t dev, void (*strat)(struct buf *),
    struct disklabel *lp, int spoofonly)
{
	struct sun_disklabel *slp;
	struct buf *bp = NULL;
	int error;

	if ((error = initdisklabel(lp)))
		goto done;
	lp->d_flags |= D_VENDOR;

	/* get a buffer and initialize it */
	bp = geteblk((int)lp->d_secsize);
	bp->b_dev = dev;

	if (spoofonly)
		goto done;

	error = readdisksector(bp, strat, lp, DL_BLKTOSEC(lp, LABELSECTOR));
	if (error)
		goto done;

	slp = (struct sun_disklabel *)bp->b_data;
	if (slp->sl_magic == SUN_DKMAGIC) {
		error = disklabel_om_to_bsd(slp, lp);
		goto done;
	}

	error = checkdisklabel(bp->b_data + LABELOFFSET, lp, 0,
	    DL_GETDSIZE(lp));
	if (error == 0)
		goto done;

#if defined(CD9660)
	error = iso_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif
#if defined(UDF)
	error = udf_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif

done:
	if (bp) {
		bp->b_flags |= B_INVAL;
		brelse(bp);
	}
	disk_change = 1;
	return (error);
}
예제 #4
0
/*
 * Attempt to read a disk label from a device
 * using the indicated strategy routine.
 * The label must be partly set up before this:
 * secpercyl and anything required in the strategy routine
 * (e.g., sector size) must be filled in before calling us.
 */
int
readdisklabel(dev_t dev, void (*strat)(struct buf *),
    struct disklabel *lp, int spoofonly)
{
	struct buf *bp = NULL;
	int error;

	if ((error = initdisklabel(lp)))
		goto done;

	/* get a buffer and initialize it */
	bp = geteblk((int)lp->d_secsize);
	bp->b_dev = dev;

	/* don't read the on-disk label if we are in spoofed-only mode */
	if (spoofonly)
		goto done;

	bp->b_blkno = LABELSECTOR;
	bp->b_bcount = lp->d_secsize;
	CLR(bp->b_flags, B_READ | B_WRITE | B_DONE);
	SET(bp->b_flags, B_BUSY | B_READ | B_RAW);
	(*strat)(bp);
	if (biowait(bp)) {
		error = bp->b_error;
		goto done;
	}

	error = cputobsdlabel(lp, (struct mvmedisklabel *)bp->b_data);
	if (error == 0)
		goto done;

#if defined(CD9660)
	error = iso_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif
#if defined(UDF)
	error = udf_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif

done:
	if (bp) {
		bp->b_flags |= B_INVAL;
		brelse(bp);
	}
	disk_change = 1;
	return (error);
}
예제 #5
0
/*
 * Attempt to read a disk label from a device
 * using the indicated strategy routine.
 * The label must be partly set up before this:
 * secpercyl, secsize and anything required for a block i/o read
 * operation in the driver's strategy/start routines
 * must be filled in before calling us.
 */
int
readdisklabel(dev_t dev, void (*strat)(struct buf *), struct disklabel *lp,
    int spoofonly)
{
	struct buf *bp = NULL;
	int error;

	if ((error = initdisklabel(lp)))
		goto done;

	bp = geteblk((int)lp->d_secsize);
	bp->b_dev = dev;

	/*
	 * Check for a VDIT or native-in-VDM label first.
	 * If a valid VDM signature is found, but neither a VDIT nor a
	 * native label are found, do not attempt to check for any other
	 * label scheme.
	 */
	error = readvdmlabel(bp, strat, lp, NULL, spoofonly);
	if (error == 0)
		goto done;
	if (error == ENOENT) {
		error = EINVAL;
		goto done;
	}

	error = readdoslabel(bp, strat, lp, NULL, spoofonly);
	if (error == 0)
		goto done;

#if defined(CD9660)
	error = iso_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif
#if defined(UDF)
	error = udf_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif

done:
	if (bp) {
		bp->b_flags |= B_INVAL;
		brelse(bp);
	}
	disk_change = 1;
	return (error);
}
예제 #6
0
/*
 * Attempt to read a disk label from a device
 * using the indicated strategy routine.
 * The label must be partly set up before this:
 * secpercyl, secsize and anything required for a block i/o read
 * operation in the driver's strategy/start routines
 * must be filled in before calling us.
 */
int
readdisklabel(dev_t dev, void (*strat)(struct buf *),
              struct disklabel *lp, int spoofonly)
{
    struct buf *bp = NULL;
    int error;

    if ((error = initdisklabel(lp)))
        goto done;
    lp->d_flags |= D_VENDOR;

    /* get a buffer and initialize it */
    bp = geteblk((int)lp->d_secsize);
    bp->b_dev = dev;

    error = readsgilabel(bp, strat, lp, NULL, spoofonly);
    if (error == 0)
        goto done;

    error = readdoslabel(bp, strat, lp, NULL, spoofonly);
    if (error == 0)
        goto done;

#if defined(CD9660)
    error = iso_disklabelspoof(dev, strat, lp);
    if (error == 0)
        goto done;
#endif
#if defined(UDF)
    error = udf_disklabelspoof(dev, strat, lp);
    if (error == 0)
        goto done;
#endif

done:
    if (bp) {
        bp->b_flags |= B_INVAL;
        brelse(bp);
    }
    disk_change = 1;
    return (error);
}
예제 #7
0
/*
 * Attempt to read a disk label from a device
 * using the indicated strategy routine.
 * The label must be partly set up before this:
 * secpercyl, secsize and anything required for a block i/o read
 * operation in the driver's strategy/start routines
 * must be filled in before calling us.
 */
int
readdisklabel(dev_t dev, void (*strat)(struct buf *),
    struct disklabel *lp, int spoofonly)
{
	struct sun_disklabel *slp;
	struct buf *bp = NULL;
	int error;

	if ((error = initdisklabel(lp)))
		goto done;
	lp->d_flags |= D_VENDOR;

	/*
	 * On sparc64 we check for a CD label first, because our
	 * CD install media contains both sparc & sparc64 labels.
	 * We want the sparc64 machine to find the "CD label", not
	 * the SunOS label, for loading its kernel.
	 */
#if NCD > 0
	if (strat == cdstrategy) {
#if defined(CD9660)
		if (iso_disklabelspoof(dev, strat, lp) == 0)
			goto done;
#endif
#if defined(UDF)
		if (udf_disklabelspoof(dev, strat, lp) == 0)
			goto done;
#endif
	}
#endif /* NCD > 0 */

	/* get buffer and initialize it */
	bp = geteblk((int)lp->d_secsize);
	bp->b_dev = dev;

	if (spoofonly)
		goto doslabel;

	error = readdisksector(bp, strat, lp, DL_BLKTOSEC(lp, LABELSECTOR));
	if (error)
		goto done;

	slp = (struct sun_disklabel *)bp->b_data;
	if (slp->sl_magic == SUN_DKMAGIC) {
		error = disklabel_sun_to_bsd(slp, lp);
		goto done;
	}

	error = checkdisklabel(bp->b_data + LABELOFFSET, lp, 0, DL_GETDSIZE(lp));
	if (error == 0)
		goto done;

doslabel:
	error = readdoslabel(bp, strat, lp, NULL, spoofonly);
	if (error == 0)
		goto done;

	/* A CD9660/UDF label may be on a non-CD drive, so recheck */
#if defined(CD9660)
	error = iso_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif
#if defined(UDF)
	error = udf_disklabelspoof(dev, strat, lp);
	if (error == 0)
		goto done;
#endif

done:
	if (bp) {
		bp->b_flags |= B_INVAL;
		brelse(bp);
	}
	disk_change = 1;
	return (error);
}