//-----------------------------------------------------------------------------
// 描述: 服务器开始运行后，主线程进行后台守护工作
//-----------------------------------------------------------------------------
void IseMainServer::runBackground()
{
int adjustThreadInterval = iseApp().iseOptions().getUdpAdjustThreadInterval();
int secondCount = 0;
while (!iseApp().isTerminated())
try
{
try
{
// 每隔 adjustThreadInterval 秒执行一次
if ((secondCount % adjustThreadInterval) == 0)
{
#ifdef ISE_LINUX
// 暂时屏蔽退出信号
SignalMasker sigMasker(true);
sigMasker.setSignals(1, SIGTERM);
sigMasker.block();
#endif
// 维护工作者线程的数量
if (udpServer_) udpServer_->adjustWorkerThreadCount();
}
}
catch (...)
{}
secondCount++;
sleepSeconds(1, true); // 1秒
}
catch (...)
{}
}
//-----------------------------------------------------------------------------
// 描述: 服务器初始化 (若初始化失败则抛出异常)
// 备注: 由 iseApp().initialize() 调用
//-----------------------------------------------------------------------------
void IseMainServer::initialize()
{
// 定时器管理器
timerManager_ = new TimerManager();
// 初始化 UDP 服务器
if (iseApp().iseOptions().getServerType() & ST_UDP)
{
udpServer_ = new MainUdpServer();
udpServer_->setLocalPort(static_cast<WORD>(iseApp().iseOptions().getUdpServerPort()));
udpServer_->setListenerThreadCount(iseApp().iseOptions().getUdpListenerThreadCount());
udpServer_->open();
}
// 初始化 TCP 服务器
if (iseApp().iseOptions().getServerType() & ST_TCP)
{
tcpServer_ = new MainTcpServer();
tcpServer_->open();
}
// 初始化辅助服务器
assistorServer_ = new AssistorServer();
assistorServer_->open();
// TCP连接器
tcpConnector_ = new TcpConnector();
// 初始化系统线程管理器
sysThreadMgr_ = new SysThreadMgr();
sysThreadMgr_->initialize();
}
void AppBusiness::afterInit()
{
string ip = iseApp().getArgString(0);
int port = 10003;
iseApp().tcpConnector().connect(InetAddress(ip, port),
boost::bind(&AppBusiness::onConnectComplete, this, _1, _2, _3, _4));
}
//-----------------------------------------------------------------------------
// 描述: 构造函数
// 参数:
// ownGroup - 指定所属组别
//-----------------------------------------------------------------------------
UdpRequestQueue::UdpRequestQueue(UdpRequestGroup *ownGroup) :
condition_(mutex_)
{
int groupIndex;
ownGroup_ = ownGroup;
groupIndex = ownGroup->getGroupIndex();
capacity_ = iseApp().iseOptions().getUdpRequestQueueCapacity(groupIndex);
maxWaitTime_ = iseApp().iseOptions().getUdpRequestMaxWaitTime();
packetCount_ = 0;
}
//-----------------------------------------------------------------------------
// 描述: 根据负载情况动态调整线程数量
//-----------------------------------------------------------------------------
void UdpWorkerThreadPool::AdjustThreadCount()
{
int packetCount, threadCount;
int minThreads, maxThreads, deltaThreads;
int packetAlertLine;
// 取得线程数量上下限
iseApp().iseOptions().getUdpWorkerThreadCount(
ownGroup_->getGroupIndex(), minThreads, maxThreads);
// 取得请求队列中数据包数量警戒线
packetAlertLine = iseApp().iseOptions().getUdpRequestQueueAlertLine();
// 检测线程是否工作超时
checkThreadTimeout();
// 强行杀死僵死的线程
killZombieThreads();
// 取得数据包数量和线程数量
packetCount = ownGroup_->getRequestQueue().getCount();
threadCount = threadList_.getCount();
// 保证线程数量在上下限范围之内
if (threadCount < minThreads)
{
createThreads(minThreads - threadCount);
threadCount = minThreads;
}
if (threadCount > maxThreads)
{
terminateThreads(threadCount - maxThreads);
threadCount = maxThreads;
}
// 如果请求队列中的数量超过警戒线，则尝试增加线程数量
if (threadCount < maxThreads && packetCount >= packetAlertLine)
{
deltaThreads = ise::min(maxThreads - threadCount, 3);
createThreads(deltaThreads);
}
// 如果请求队列为空，则尝试减少线程数量
if (threadCount > minThreads && packetCount == 0)
{
deltaThreads = 1;
terminateThreads(deltaThreads);
}
}
UdpWorkerThread::UdpWorkerThread(UdpWorkerThreadPool *threadPool) :
ownPool_(threadPool),
timeoutChecker_(this)
{
setAutoDelete(true);
// 启用超时检测
timeoutChecker_.setTimeoutSecs(iseApp().iseOptions().getUdpWorkerThreadTimeout());
ownPool_->registerThread(this);
}
//-----------------------------------------------------------------------------
// 描述: 用户信号处理器
//-----------------------------------------------------------------------------
void userSignalHandler(int sigNo)
{
const CallbackList<UserSignalHandlerCallback>& callbackList = iseApp().onUserSignal_;
for (int i = 0; i < callbackList.getCount(); i++)
{
const UserSignalHandlerCallback& callback = callbackList.getItem(i);
if (callback)
callback(sigNo);
}
}
//-----------------------------------------------------------------------------
// 描述: 致命非法操作 信号处理器
//-----------------------------------------------------------------------------
void fatalErrorSignalHandler(int sigNo)
{
static bool isInHandler = false;
if (isInHandler) return;
isInHandler = true;
// 停止主线程循环
iseApp().setTerminated(true);
logger().writeFmt(SEM_SIG_FATAL_ERROR, sigNo);
abort();
}
//-----------------------------------------------------------------------------
// 描述: 初始化请求组别列表
//-----------------------------------------------------------------------------
void MainUdpServer::initRequestGroupList()
{
clearRequestGroupList();
requestGroupCount_ = iseApp().iseOptions().getUdpRequestGroupCount();
for (int groupIndex = 0; groupIndex < requestGroupCount_; groupIndex++)
{
UdpRequestGroup *p;
p = new UdpRequestGroup(this, groupIndex);
requestGroupList_.push_back(p);
}
}
//-----------------------------------------------------------------------------
// 描述: 正常退出程序 信号处理器
//-----------------------------------------------------------------------------
void exitProgramSignalHandler(int sigNo)
{
static bool isInHandler = false;
if (isInHandler) return;
isInHandler = true;
// 停止主线程循环
iseApp().setTerminated(true);
logger().writeFmt(SEM_SIG_TERM, sigNo);
siglongjmp(procExitJmpBuf, 1);
}
//-----------------------------------------------------------------------------
// 描述: 更新ISE配置
//-----------------------------------------------------------------------------
void IseSvrModBusiness::updateIseOptions()
{
IseOptions& options = iseApp().iseOptions();
// 设置UDP请求组别的总数量
options.setUdpRequestGroupCount(getUdpGroupCount());
// 设置TCP服务器的总数量
options.setTcpServerCount(getTcpServerCount());
// UDP请求组别相关设置
int globalGroupIndex = 0;
for (int modIndex = 0; modIndex < serverModuleMgr_.getCount(); modIndex++)
{
IseServerModule& serverModule = serverModuleMgr_.getItem(modIndex);
for (int groupIndex = 0; groupIndex < serverModule.getUdpGroupCount(); groupIndex++)
{
UdpGroupOptions grpOpt;
serverModule.getUdpGroupOptions(groupIndex, grpOpt);
options.setUdpRequestQueueCapacity(globalGroupIndex, grpOpt.requestQueueCapacity);
options.setUdpWorkerThreadCount(globalGroupIndex, grpOpt.minWorkerThreads, grpOpt.maxWorkerThreads);
globalGroupIndex++;
}
}
// TCP服务器相关设置
int globalServerIndex = 0;
for (int modIndex = 0; modIndex < serverModuleMgr_.getCount(); modIndex++)
{
IseServerModule& serverModule = serverModuleMgr_.getItem(modIndex);
for (int serverIndex = 0; serverIndex < serverModule.getTcpServerCount(); serverIndex++)
{
TcpServerOptions svrOpt;
serverModule.getTcpServerOptions(serverIndex, svrOpt);
options.setTcpServerPort(globalServerIndex, svrOpt.serverPort);
options.setTcpServerEventLoopCount(globalServerIndex, svrOpt.eventLoopCount);
globalServerIndex++;
}
}
// 设置辅助服务线程的数量
int assistorCount = 0;
for (int i = 0; i < serverModuleMgr_.getCount(); i++)
assistorCount += serverModuleMgr_.getItem(i).getAssistorThreadCount();
options.setAssistorThreadCount(assistorCount);
}
//-----------------------------------------------------------------------------
// 描述: 收到数据包
//-----------------------------------------------------------------------------
void MainUdpServer::onRecvData(void *packetBuffer, int packetSize, const InetAddress& peerAddr)
{
int groupIndex;
// 先进行数据包分类，得到组别号
iseApp().iseBusiness().classifyUdpPacket(packetBuffer, packetSize, groupIndex);
// 如果组别号合法
if (groupIndex >= 0 && groupIndex < requestGroupCount_)
{
UdpPacket *p = new UdpPacket();
if (p)
{
p->recvTimestamp_ = time(NULL);
p->peerAddr_ = peerAddr;
p->packetSize_ = packetSize;
p->setPacketBuffer(packetBuffer, packetSize);
// 添加到请求队列中
requestGroupList_[groupIndex]->getRequestQueue().addPacket(p);
}
}
}
//-----------------------------------------------------------------------------
// 描述: 线程的执行函数
//-----------------------------------------------------------------------------
void UdpWorkerThread::execute()
{
int groupIndex;
UdpRequestQueue *requestQueue;
groupIndex = ownPool_->getRequestGroup().getGroupIndex();
requestQueue = &(ownPool_->getRequestGroup().getRequestQueue());
while (!isTerminated())
try
{
boost::scoped_ptr<UdpPacket> packet(requestQueue->extractPacket());
if (packet)
{
AutoInvoker autoInvoker(timeoutChecker_);
// 分派数据包
if (!isTerminated())
iseApp().iseBusiness().onRecvedUdpPacket(*this, groupIndex, *packet);
}
}
catch (Exception&)
{}
}
void IseServerModule::broadcastMessage(BaseSvrModMessage& message)
{
(static_cast<IseSvrModBusiness*>(&iseApp().iseBusiness()))->broadcastMessage(message);
}
