예제 #1
0
unsigned long write_coreboot_table(
	unsigned long low_table_start, unsigned long low_table_end,
	unsigned long rom_table_start, unsigned long rom_table_end)
{
	struct lb_header *head;

	if (low_table_start || low_table_end) {
		printk(BIOS_DEBUG, "Writing table forward entry at 0x%08lx\n",
				low_table_end);
		head = lb_table_init(low_table_end);
		lb_forward(head, (struct lb_header*)rom_table_end);

		low_table_end = (unsigned long) lb_table_fini(head);
		printk(BIOS_DEBUG, "Table forward entry ends at 0x%08lx.\n",
			low_table_end);
		low_table_end = ALIGN(low_table_end, 4096);
		printk(BIOS_DEBUG, "... aligned to 0x%08lx\n", low_table_end);
	}

	printk(BIOS_DEBUG, "Writing coreboot table at 0x%08lx\n",
		rom_table_end);

	head = lb_table_init(rom_table_end);
	rom_table_end = (unsigned long)head;
	printk(BIOS_DEBUG, "rom_table_end = 0x%08lx\n", rom_table_end);
	rom_table_end = ALIGN(rom_table_end, (64 * 1024));
	printk(BIOS_DEBUG, "... aligned to 0x%08lx\n", rom_table_end);

#if CONFIG_USE_OPTION_TABLE
	{
		struct cmos_option_table *option_table =
			cbfs_boot_map_with_leak("cmos_layout.bin",
				CBFS_COMPONENT_CMOS_LAYOUT, NULL);
		if (option_table) {
			struct lb_record *rec_dest = lb_new_record(head);
			/* Copy the option config table, it's already a lb_record... */
			memcpy(rec_dest,  option_table, option_table->size);
			/* Create cmos checksum entry in coreboot table */
			lb_cmos_checksum(head);
		} else {
			printk(BIOS_ERR, "cmos_layout.bin could not be found!\n");
		}
	}
#endif

	/* Initialize the memory map at boot time. */
	bootmem_init();

	if (low_table_start || low_table_end) {
		uint64_t size = low_table_end - low_table_start;
		/* Record the mptable and the the lb_table.
		 * (This will be adjusted later)  */
		bootmem_add_range(low_table_start, size, LB_MEM_TABLE);
	}

	/* Record the pirq table, acpi tables, and maybe the mptable. However,
	 * these only need to be added when the rom_table is sitting below
	 * 1MiB. If it isn't that means high tables are being written.
	 * The code below handles high tables correctly. */
	if (rom_table_end <= (1 << 20)) {
		uint64_t size = rom_table_end - rom_table_start;
		bootmem_add_range(rom_table_start, size, LB_MEM_TABLE);
	}

	/* No other memory areas can be added after the memory table has been
	 * committed as the entries won't show up in the serialize mem table. */
	bootmem_write_memory_table(lb_memory(head));

	/* Record our motherboard */
	lb_mainboard(head);

	/* Record the serial ports and consoles */
#if CONFIG_CONSOLE_SERIAL
	uart_fill_lb(head);
#endif
#if CONFIG_CONSOLE_USB
	lb_add_console(LB_TAG_CONSOLE_EHCI, head);
#endif

	/* Record our various random string information */
	lb_strings(head);
	lb_record_version_timestamp(head);
	/* Record our framebuffer */
	lb_framebuffer(head);

#if CONFIG_CHROMEOS
	/* Record our GPIO settings (ChromeOS specific) */
	lb_gpios(head);

	/* pass along the VDAT buffer address */
	lb_vdat(head);

	/* pass along VBNV offsets in CMOS */
	lb_vbnv(head);

	/* pass along the vboot_handoff address. */
	lb_vboot_handoff(head);
#endif

	/* Add board ID if available */
	lb_board_id(head);

	/* Add RAM config if available */
	lb_ram_code(head);

#if IS_ENABLED(CONFIG_SPI_FLASH)
	/* Add SPI flash description if available */
	lb_spi_flash(head);
#endif

	add_cbmem_pointers(head);

	/* Add board-specific table entries, if any. */
	lb_board(head);

#if IS_ENABLED(CONFIG_CHROMEOS_RAMOOPS)
	lb_ramoops(head);
#endif

	lb_boot_media_params(head);

	/* Add all cbmem entries into the coreboot tables. */
	cbmem_add_records_to_cbtable(head);

	/* Remember where my valid memory ranges are */
	return lb_table_fini(head);
}
예제 #2
0
unsigned long write_coreboot_table(
	unsigned long low_table_start, unsigned long low_table_end,
	unsigned long rom_table_start, unsigned long rom_table_end)
{
	struct lb_header *head;
	struct lb_memory *mem;

	if (low_table_start || low_table_end) {
		printk(BIOS_DEBUG, "Writing table forward entry at 0x%08lx\n",
				low_table_end);
		head = lb_table_init(low_table_end);
		lb_forward(head, (struct lb_header*)rom_table_end);

		low_table_end = (unsigned long) lb_table_fini(head, 0);
		printk(BIOS_DEBUG, "Table forward entry ends at 0x%08lx.\n",
			low_table_end);
		low_table_end = ALIGN(low_table_end, 4096);
		printk(BIOS_DEBUG, "... aligned to 0x%08lx\n", low_table_end);
	}

	printk(BIOS_DEBUG, "Writing coreboot table at 0x%08lx\n",
		rom_table_end);

	head = lb_table_init(rom_table_end);
	rom_table_end = (unsigned long)head;
	printk(BIOS_DEBUG, "rom_table_end = 0x%08lx\n", rom_table_end);
	rom_table_end = ALIGN(rom_table_end, (64 * 1024));
	printk(BIOS_DEBUG, "... aligned to 0x%08lx\n", rom_table_end);

#if CONFIG_USE_OPTION_TABLE
	{
		struct cmos_option_table *option_table = cbfs_get_file_content(
				CBFS_DEFAULT_MEDIA, "cmos_layout.bin",
				CBFS_COMPONENT_CMOS_LAYOUT);
		if (option_table) {
			struct lb_record *rec_dest = lb_new_record(head);
			/* Copy the option config table, it's already a lb_record... */
			memcpy(rec_dest,  option_table, option_table->size);
			/* Create cmos checksum entry in coreboot table */
			lb_cmos_checksum(head);
		} else {
			printk(BIOS_ERR, "cmos_layout.bin could not be found!\n");
		}
	}
#endif

	/* The Linux kernel assumes this region is reserved */
	/* Record where RAM is located */
	mem = build_lb_mem(head);

	if (low_table_start || low_table_end) {
		/* Record the mptable and the the lb_table.
		 * (This will be adjusted later)  */
		lb_add_memory_range(mem, LB_MEM_TABLE,
			low_table_start, low_table_end - low_table_start);
	}

	/* Record the pirq table, acpi tables, and maybe the mptable. However,
	 * these only need to be added when the rom_table is sitting below
	 * 1MiB. If it isn't that means high tables are being written.
	 * The code below handles high tables correctly. */
	if (rom_table_end <= (1 << 20))
		lb_add_memory_range(mem, LB_MEM_TABLE,
			rom_table_start, rom_table_end - rom_table_start);

#if CONFIG_DYNAMIC_CBMEM
	cbmem_add_lb_mem(mem);
#else /* CONFIG_DYNAMIC_CBMEM */
	lb_add_memory_range(mem, LB_MEM_TABLE,
		high_tables_base, high_tables_size);
#endif /* CONFIG_DYNAMIC_CBMEM */

	/* Add reserved regions */
	add_lb_reserved(mem);

	lb_dump_memory_ranges(mem);

	/* Note:
	 * I assume that there is always memory at immediately after
	 * the low_table_end.  This means that after I setup the coreboot table.
	 * I can trivially fixup the reserved memory ranges to hold the correct
	 * size of the coreboot table.
	 */

	/* Record our motherboard */
	lb_mainboard(head);
	/* Record the serial port, if present */
	lb_serial(head);
	/* Record our console setup */
	lb_console(head);
	/* Record our various random string information */
	lb_strings(head);
	/* Record our framebuffer */
	lb_framebuffer(head);

#if CONFIG_CHROMEOS
	/* Record our GPIO settings (ChromeOS specific) */
	lb_gpios(head);

	/* pass along the VDAT buffer adress */
	lb_vdat(head);

	/* pass along VBNV offsets in CMOS */
	lb_vbnv(head);

	/* pass along the vboot_handoff address. */
	lb_vboot_handoff(head);
#endif
	add_cbmem_pointers(head);

	/* Remember where my valid memory ranges are */
	return lb_table_fini(head, 1);
}
예제 #3
0
static uintptr_t write_coreboot_table(uintptr_t rom_table_end)
{
	struct lb_header *head;

	printk(BIOS_DEBUG, "Writing coreboot table at 0x%08lx\n",
		(long)rom_table_end);

	head = lb_table_init(rom_table_end);

#if CONFIG(USE_OPTION_TABLE)
	{
		struct cmos_option_table *option_table =
			cbfs_boot_map_with_leak("cmos_layout.bin",
				CBFS_COMPONENT_CMOS_LAYOUT, NULL);
		if (option_table) {
			struct lb_record *rec_dest = lb_new_record(head);
			/* Copy the option config table, it's already a
			 * lb_record...
			 */
			memcpy(rec_dest,  option_table, option_table->size);
			/* Create cmos checksum entry in coreboot table */
			lb_cmos_checksum(head);
		} else {
			printk(BIOS_ERR,
				"cmos_layout.bin could not be found!\n");
		}
	}
#endif

	/* Serialize resource map into mem table types (LB_MEM_*) */
	bootmem_write_memory_table(lb_memory(head));

	/* Record our motherboard */
	lb_mainboard(head);

	/* Record the serial ports and consoles */
#if CONFIG(CONSOLE_SERIAL)
	uart_fill_lb(head);
#endif
#if CONFIG(CONSOLE_USB)
	lb_add_console(LB_TAG_CONSOLE_EHCI, head);
#endif

	/* Record our various random string information */
	lb_strings(head);
	lb_record_version_timestamp(head);
	/* Record our framebuffer */
	lb_framebuffer(head);

#if CONFIG(CHROMEOS)
	/* Record our GPIO settings (ChromeOS specific) */
	lb_gpios(head);

	/* pass along VBNV offsets in CMOS */
	lb_vbnv(head);
#endif

	if (CONFIG(VBOOT)) {
		/* pass along the vboot_handoff address. */
		lb_vboot_handoff(head);

		/* pass along the vboot workbuf address. */
		lb_vboot_workbuf(head);
	}

	/* Add strapping IDs if available */
	lb_board_id(head);
	lb_ram_code(head);
	lb_sku_id(head);

	/* Add SPI flash description if available */
	if (CONFIG(BOOT_DEVICE_SPI_FLASH))
		lb_spi_flash(head);

	add_cbmem_pointers(head);

	/* Add board-specific table entries, if any. */
	lb_board(head);

#if CONFIG(CHROMEOS_RAMOOPS)
	lb_ramoops(head);
#endif

	lb_boot_media_params(head);

	/* Add architecture records. */
	lb_arch_add_records(head);

	/* Add all cbmem entries into the coreboot tables. */
	cbmem_add_records_to_cbtable(head);

	/* Remember where my valid memory ranges are */
	return lb_table_fini(head);
}