예제 #1
0
파일: widgets.cpp 프로젝트: BenZoFly/opentx
void drawStick(coord_t centrex, int16_t xval, int16_t yval)
{
#define BOX_CENTERY   (LCD_H-BOX_WIDTH/2-10)
#define MARKER_WIDTH  5
  lcd_square(centrex-BOX_WIDTH/2, BOX_CENTERY-BOX_WIDTH/2, BOX_WIDTH);
  lcd_vline(centrex, BOX_CENTERY-1, 3);
  lcd_hline(centrex-1, BOX_CENTERY, 3);
  lcd_square(centrex + (xval/((2*RESX)/(BOX_WIDTH-MARKER_WIDTH))) - MARKER_WIDTH/2, BOX_CENTERY - (yval/((2*RESX)/(BOX_WIDTH-MARKER_WIDTH))) - MARKER_WIDTH/2, MARKER_WIDTH, ROUND);
#undef BOX_CENTERY
#undef MARKER_WIDTH
}
예제 #2
0
파일: widgets.cpp 프로젝트: BenZoFly/opentx
void menu_lcd_onoff(coord_t x, coord_t y, uint8_t value, LcdFlags attr)
{
  if (value)
    lcd_putc(x+1, y, '#');
  if (attr)
    drawFilledRect(x, y, 7, 7);
  else
    lcd_square(x, y, 7);
}
예제 #3
0
void menu_lcd_onoff(uint8_t x, uint8_t y, uint8_t value, LcdFlags attr)
{
#if defined(GRAPHICS)
    if (value)
        lcd_putc(x+1, y, '#');
    if (attr)
        lcd_filled_rect(x, y, 7, 7);
    else
        lcd_square(x, y, 7);
#else
    /* ON / OFF version */
    lcd_putsiAtt(x, y, STR_OFFON, value, attr ? INVERS:0) ;
#endif
}
예제 #4
0
파일: view_main.cpp 프로젝트: bellth/opentx
void displayTrims(uint8_t phase)
{
  for (uint8_t i=0; i<4; i++) {
    static coord_t x[4] = {TRIM_LH_X, TRIM_LV_X, TRIM_RV_X, TRIM_RH_X};
    static uint8_t vert[4] = {0,1,1,0};
    coord_t xm, ym;
    uint8_t stickIndex = CONVERT_MODE(i);
    xm = x[stickIndex];
    uint8_t att = ROUND;
    int16_t val = getTrimValue(phase, i);

#if !defined(CPUM64) || !defined(FRSKY)
    int16_t dir = val;
    bool exttrim = false;
    if (val < TRIM_MIN || val > TRIM_MAX) {
      exttrim = true;
    }
#endif
    if (val < -(TRIM_LEN+1)*4) {
      val = -(TRIM_LEN+1);
    }
    else if (val > (TRIM_LEN+1)*4) {
      val = TRIM_LEN+1;
    }
    else {
      val /= 4;
    }

    if (vert[i]) {
      ym = 31;
      lcd_vline(xm, ym-TRIM_LEN, TRIM_LEN*2);
      if (i!=2 || !g_model.thrTrim) {
        lcd_vline(xm-1, ym-1,  3);
        lcd_vline(xm+1, ym-1,  3);
      }
      ym -= val;
#if !defined(CPUM64) || !defined(FRSKY)
      drawFilledRect(xm-3, ym-3, 7, 7, SOLID, att|ERASE);
      if (dir >= 0) {
        lcd_hline(xm-1, ym-1,  3);
      }
      if (dir <= 0) {
        lcd_hline(xm-1, ym+1,  3);
      }
      if (exttrim) {
        lcd_hline(xm-1, ym,  3);
      }
#endif
#if defined(CPUARM)
      if (g_model.displayTrims != DISPLAY_TRIMS_NEVER && dir != 0) {
        if (g_model.displayTrims == DISPLAY_TRIMS_ALWAYS || (trimsDisplayTimer > 0 && (trimsDisplayMask & (1<<i)))) {
          lcd_outdezAtt(dir>0 ? 22 : 54, xm-2, -abs(dir/5), TINSIZE|VERTICAL);
        }
      }
#endif
    }
    else {
      ym = 60;
      lcd_hline(xm-TRIM_LEN, ym, TRIM_LEN*2);
      lcd_hline(xm-1, ym-1,  3);
      lcd_hline(xm-1, ym+1,  3);
      xm += val;
#if !defined(CPUM64) || !defined(FRSKY)
      drawFilledRect(xm-3, ym-3, 7, 7, SOLID, att|ERASE);
      if (dir >= 0) {
        lcd_vline(xm+1, ym-1,  3);
      }
      if (dir <= 0) {
        lcd_vline(xm-1, ym-1,  3);
      }
      if (exttrim) {
        lcd_vline(xm, ym-1,  3);
      }
#endif
#if defined(CPUARM)
      if (g_model.displayTrims != DISPLAY_TRIMS_NEVER && dir != 0) {
        if (g_model.displayTrims == DISPLAY_TRIMS_ALWAYS || (trimsDisplayTimer > 0 && (trimsDisplayMask & (1<<i)))) {
          lcd_outdezAtt((stickIndex==0 ? TRIM_LH_X : TRIM_RH_X)+(dir>0 ? -11 : 20), ym-2, -abs(dir/5), TINSIZE);
        }
      }
#endif
    }
    lcd_square(xm-3, ym-3, 7, att);
  }
}