예제 #1
0
static void __init msm7x2x_init(void)
{
	msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);

#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
	msm_serial_debug_init(MSM_UART1_PHYS, INT_UART1,
			&msm_device_uart1.dev, 1);
#endif

	if (cpu_is_msm7x27())
		msm7x2x_clock_data.max_axi_khz = 200000;

	msm_acpu_clock_init(&msm7x2x_clock_data);

	msm_add_pmem_devices();
	msm_add_fb_device();
#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
	if (lge_get_uart_mode())
		platform_device_register(&msm_device_uart3);
#endif
	platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_ARCH_MSM7X27
	msm_add_kgsl_device();
#endif
	msm_add_usb_devices();

#ifdef CONFIG_MSM_CAMERA
	config_camera_off_gpios(); /* might not be necessary */
#endif
	msm_device_i2c_init();
	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));

	if (cpu_is_msm7x27())
		msm_pm_set_platform_data(msm7x27_pm_data,
					ARRAY_SIZE(msm7x27_pm_data));
	else
		msm_pm_set_platform_data(msm7x25_pm_data,
					ARRAY_SIZE(msm7x25_pm_data));
	msm7x27_wlan_init();

#ifdef CONFIG_ANDROID_RAM_CONSOLE
	lge_add_ramconsole_devices();
	lge_add_ers_devices();
	lge_add_panic_handler_devices();
#endif
	lge_add_camera_devices();
	lge_add_lcd_devices();
	lge_add_btpower_devices();
	lge_add_mmc_devices();
	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_pm_devices();

	lge_add_gpio_i2c_devices();
	
	create_testmode_status();  
	create_sw_version_status();  
	create_smpl_reset_status();    
	create_qpst_enable_status(); 
}
예제 #2
0
static void __init msm7x2x_init(void)
{
	if (socinfo_init() < 0)
		printk(KERN_ERR "%s: socinfo_init() failed!\n",
		       __func__);

	msm_clock_init(msm_clocks_7x27a, msm_num_clocks_7x27a);
	msm_acpu_clock_init(&msm7x2x_clock_data);

	/* Common functions for SURF/FFA/RUMI3 */
	msm_device_i2c_init();

	msm7x27a_init_ebi2();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

	msm_add_pmem_devices();
	msm_add_fb_device();

	platform_add_devices(m3eu_devices,
		ARRAY_SIZE(m3eu_devices));

	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();

	if (lge_get_uart_mode()) {
		if (lge_bd_rev == LGE_REV_A)
			platform_device_register(&msm_device_uart3);
		else
			platform_device_register(&msm_device_uart1);
	}

	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_mmc_devices();
	lge_add_sound_devices();
	lge_add_lcd_devices();
	lge_add_camera_devices();
	lge_add_pm_devices();
	lge_add_usb_devices();
	lge_add_connectivity_devices(); /* [email protected], for Bluetooth/FM */

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();

	lge_add_ramconsole_devices();
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
/* [email protected] [2011-09-22] - Read power on status and update boot reason */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif

}
static void __init msm7x2x_init(void)
{
	if (socinfo_init() < 0)
		printk(KERN_ERR "%s: socinfo_init() failed!\n",
		       __func__);

	msm_clock_init(msm_clocks_7x27a, msm_num_clocks_7x27a);
	msm_acpu_clock_init(&msm7x2x_clock_data);

	/* Common functions for SURF/FFA/RUMI3 */
	msm_device_i2c_init();

	msm7x27a_init_ebi2();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

	msm_add_pmem_devices();
	msm_add_fb_device();

	platform_add_devices(m3_devices,
		ARRAY_SIZE(m3_devices));

	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();

	platform_device_register(&msm_device_uart1);

	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_mmc_devices();
	lge_add_sound_devices();
	lge_add_lcd_devices();
	lge_add_camera_devices();
	//lge_add_pm_devices();
	lge_add_usb_devices();
	lge_add_connectivity_devices(); /*                                     */

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();

	lge_add_ramconsole_devices();
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif

/*                                                                                   */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif

#ifdef CONFIG_LGE_SILENCE_RESET
	check_smem_ers_status();
#endif
}
예제 #4
0
static void __init msm7x30_init(void)
{
	uint32_t soc_version = 0;

	if (socinfo_init() < 0)
		printk(KERN_ERR "%s: socinfo_init() failed!\n",
		       __func__);

	soc_version = socinfo_get_version();

	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
#ifdef CONFIG_SERIAL_MSM_CONSOLE
	if (lge_get_uart_mode())
		msm7x30_init_uart2();
#endif
	msm_spm_init(&msm_spm_data, 1);
	msm_acpu_clock_init(&msm7x30_clock_data);

	msm_add_pmem_devices();
	msm_add_fb_device();
	msm_add_kgsl_device();

	msm_add_usb_devices();

#if defined(CONFIG_LGE_MODEL_E739)
	msm7x30_init_marimba();
#endif

#ifdef CONFIG_MSM7KV2_AUDIO
	lge_victor_audio_init();
	msm_snddev_init();
	aux_pcm_gpio_init();
#endif
	if (lge_get_uart_mode())
		platform_device_register(&msm_device_uart2);
//LGE_FW_TDMB [START]
#if defined(CONFIG_TSIF) || defined(CONFIG_TSIF_MODULE)
	msm_device_tsif.dev.platform_data = &tsif_platform_data;
#endif
//LGE_FW_TDMB [END]

	platform_add_devices(devices, ARRAY_SIZE(devices));

	msm_device_i2c_init();
	msm_device_i2c_2_init();
	qup_device_i2c_init();

#if defined(CONFIG_LGE_MODEL_E739)
    register_board_info();
#else
	msm7x30_init_marimba();

#endif


#ifdef CONFIG_I2C_SSBI
	msm_device_ssbi6.dev.platform_data = &msm_i2c_ssbi6_pdata;
	msm_device_ssbi7.dev.platform_data = &msm_i2c_ssbi7_pdata;
#endif

	/* initialize pm */
	pmic8058_buses_init();
	lge_pm_set_platform_data();

	/* add lcd devices */
	lge_add_lcd_devices();

	/* add mmc devices */
	lge_add_mmc_devices();

	/* add misc devices */
	lge_add_misc_devices();

	/* add input devices */
	lge_add_input_devices();
//LGE_FW_TDMB [START]
#ifdef CONFIG_LGE_BROADCAST	
	lge_add_broadcast_dmb_devices();
#endif
//LGE_FW_TDMB [END]

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();

	/* add buletooth devices */
	lge_add_btpower_devices();

	/* add camera devices */
	lge_add_camera_devices();

	/* add ram console device */
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	lge_add_ramconsole_devices();
#endif

#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
}
예제 #5
0
static void __init msm7x30_init(void)
{
	uint32_t soc_version = 0;

	if (socinfo_init() < 0)
		printk(KERN_ERR "%s: socinfo_init() failed!\n",
		       __func__);

	soc_version = socinfo_get_version();

	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
#ifdef CONFIG_SERIAL_MSM_CONSOLE
	if (lge_get_uart_mode())
		msm7x30_init_uart2();
#endif
	msm_spm_init(&msm_spm_data, 1);
	msm_acpu_clock_init(&msm7x30_clock_data);

	msm_add_pmem_devices();
	msm_add_fb_device();
	msm_add_kgsl_device();

	msm_add_usb_devices();

	msm7x30_init_marimba();

#ifdef CONFIG_MSM7KV2_AUDIO
	lge_victor_audio_init();
	msm_snddev_init();
	aux_pcm_gpio_init();
#endif

	if (lge_get_uart_mode())
		platform_device_register(&msm_device_uart2);

	platform_add_devices(devices, ARRAY_SIZE(devices));

	msm_device_i2c_init();
	msm_device_i2c_2_init();
	qup_device_i2c_init();

    register_board_info();

#ifdef CONFIG_I2C_SSBI
	msm_device_ssbi6.dev.platform_data = &msm_i2c_ssbi6_pdata;
	msm_device_ssbi7.dev.platform_data = &msm_i2c_ssbi7_pdata;
#endif

	/* initialize pm */
	pmic8058_buses_init();
	pmic8058_leds_init();    // LGE_UPDATE [email protected]. PMIC LED Control Drv.
	lge_pm_set_platform_data();
	pm8058_special_clock0_setting();

	/* add lcd devices */
	lge_add_lcd_devices();

	/* add mmc devices */
	lge_add_mmc_devices();

	/* add misc devices */
	lge_add_misc_devices();

	/* add input devices */
	lge_add_input_devices();

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();

	/* add buletooth devices */
	lge_add_btpower_devices();

	/* add camera devices */
	lge_add_camera_devices();

	/* add ram console device */
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	lge_add_ramconsole_devices();
#endif

#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
}
예제 #6
0
static void __init msm7x2x_init(void)
{
	if (socinfo_init() < 0)
		BUG();

	msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);

#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
	msm_serial_debug_init(MSM_UART3_PHYS, INT_UART3,
			&msm_device_uart3.dev, 1);
#endif

	if (cpu_is_msm7x27())
		msm7x2x_clock_data.max_axi_khz = 200000;

	msm_acpu_clock_init(&msm7x2x_clock_data);

	msm_add_pmem_devices();
	msm_add_fb_device();
#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
	if (lge_get_uart_mode())
		platform_device_register(&msm_device_uart3);
#endif
	platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_ARCH_MSM7X27
	msm_add_kgsl_device();
#endif
	msm_add_usb_devices();

#ifdef CONFIG_MSM_CAMERA
	config_camera_off_gpios(); /* might not be necessary */
#endif
	msm_device_i2c_init();
	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));

	if (cpu_is_msm7x27())
		msm_pm_set_platform_data(msm7x27_pm_data,
					ARRAY_SIZE(msm7x27_pm_data));
	else
		msm_pm_set_platform_data(msm7x25_pm_data,
					ARRAY_SIZE(msm7x25_pm_data));
	msm7x27_wlan_init();

	swift_init_gpio_i2c_devices();

#ifdef CONFIG_ANDROID_RAM_CONSOLE
	lge_add_ramconsole_devices();
	lge_add_ers_devices();
	lge_add_panic_handler_devices();
#endif
	lge_add_camera_devices();
	lge_add_lcd_devices();
	lge_add_btpower_devices();
	lge_add_mmc_devices();
	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_pm_devices();

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();
	
	/* initialize timed_output vibrator */
	swift_init_timed_vibrator();
}