예제 #1
0
파일: kpi_mbuf.c 프로젝트: onlynone/xnu
errno_t
mbuf_dup(const mbuf_t src, mbuf_how_t how, mbuf_t *new_mbuf)
{
	/* Must set *new_mbuf to NULL in failure case */
	*new_mbuf = m_dup(src, how);

	return (*new_mbuf == NULL ? ENOMEM : 0);
}
예제 #2
0
static int
nicvf_if_transmit(struct ifnet *ifp, struct mbuf *mbuf)
{
	struct nicvf *nic = if_getsoftc(ifp);
	struct queue_set *qs = nic->qs;
	struct snd_queue *sq;
	struct mbuf *mtmp;
	int qidx;
	int err = 0;


	if (__predict_false(qs == NULL)) {
		panic("%s: missing queue set for %s", __func__,
		    device_get_nameunit(nic->dev));
	}

	/* Select queue */
	if (M_HASHTYPE_GET(mbuf) != M_HASHTYPE_NONE)
		qidx = mbuf->m_pkthdr.flowid % qs->sq_cnt;
	else
		qidx = curcpu % qs->sq_cnt;

	sq = &qs->sq[qidx];

	if (mbuf->m_next != NULL &&
	    (mbuf->m_pkthdr.csum_flags &
	    (CSUM_IP | CSUM_TCP | CSUM_UDP | CSUM_SCTP)) != 0) {
		if (M_WRITABLE(mbuf) == 0) {
			mtmp = m_dup(mbuf, M_NOWAIT);
			m_freem(mbuf);
			if (mtmp == NULL)
				return (ENOBUFS);
			mbuf = mtmp;
		}
	}

	err = drbr_enqueue(ifp, sq->br, mbuf);
	if (((if_getdrvflags(ifp) & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
	    IFF_DRV_RUNNING) || !nic->link_up || (err != 0)) {
		/*
		 * Try to enqueue packet to the ring buffer.
		 * If the driver is not active, link down or enqueue operation
		 * failed, return with the appropriate error code.
		 */
		return (err);
	}

	if (NICVF_TX_TRYLOCK(sq) != 0) {
		err = nicvf_xmit_locked(sq);
		NICVF_TX_UNLOCK(sq);
		return (err);
	} else
		taskqueue_enqueue(sq->snd_taskq, &sq->snd_task);

	return (0);
}
예제 #3
0
파일: pager.c 프로젝트: guillemj/dpkg
struct pager *
pager_spawn(const char *desc)
{
	struct sigaction sa;
	struct pager *pager;
	const char *exec;

	pager = m_calloc(1, sizeof(*pager));
	pager->used = isatty(0) && isatty(1);
	pager->desc = desc;

	exec = pager_get_exec();
	if (strcmp(exec, CAT) == 0)
		pager->used = false;

	if (!pager_enabled)
		pager->used = false;

	if (!pager->used)
		return pager;

	m_pipe(pager->pipe);

	memset(&sa, 0, sizeof(sa));
	sigemptyset(&sa.sa_mask);
	sa.sa_handler = SIG_IGN;
	sa.sa_flags = 0;

	sigaction(SIGPIPE, &sa, &pager->sigpipe);

	pager->pid = subproc_fork();
	if (pager->pid == 0) {
		/* Set better defaults for less if not already set. */
		setenv("LESS", "-FRSXMQ", 0);

		m_dup2(pager->pipe[0], 0);
		close(pager->pipe[0]);
		close(pager->pipe[1]);

		command_shell(exec, desc);
	}

	pager->stdout_old = m_dup(1);
	m_dup2(pager->pipe[1], 1);
	close(pager->pipe[0]);
	close(pager->pipe[1]);

	/* Force the output to fully buffered, because originally stdout was
	 * a tty, so it was set as line buffered. This way we send as much as
	 * possible to the pager, which will handle the output by itself. */
	setvbuf(stdout, NULL, _IOFBF, 0);

	return pager;
}
예제 #4
0
static int
ipfw_divert(struct mbuf **m, int incoming, int tee)
{
	/*
	 * ipfw_chk() has already tagged the packet with the divert tag.
	 * If tee is set, copy packet and return original.
	 * If not tee, consume packet and send it to divert socket.
	 */
#ifdef IPDIVERT
	struct mbuf *clone, *reass;
	struct ip *ip;
	int hlen;

	reass = NULL;

	/* Cloning needed for tee? */
	if (tee)
		clone = m_dup(*m, M_DONTWAIT);
	else
		clone = *m;

	/* In case m_dup was unable to allocate mbufs. */
	if (clone == NULL)
		goto teeout;

	/*
	 * Divert listeners can only handle non-fragmented packets.
	 * However when tee is set we will *not* de-fragment the packets;
	 * Doing do would put the reassembly into double-jeopardy.  On top
	 * of that someone doing a tee will probably want to get the packet
	 * in its original form.
	 */
	ip = mtod(clone, struct ip *);
	if (!tee && ip->ip_off & (IP_MF | IP_OFFMASK)) {

		/* Reassemble packet. */
		reass = ip_reass(clone);

		/*
		 * IP header checksum fixup after reassembly and leave header
		 * in network byte order.
		 */
		if (reass != NULL) {
			ip = mtod(reass, struct ip *);
			hlen = ip->ip_hl << 2;
			ip->ip_len = htons(ip->ip_len);
			ip->ip_off = htons(ip->ip_off);
			ip->ip_sum = 0;
			if (hlen == sizeof(struct ip))
				ip->ip_sum = in_cksum_hdr(ip);
			else
				ip->ip_sum = in_cksum(reass, hlen);
			clone = reass;
		} else
void
ng_hci_mtap(ng_hci_unit_p unit, struct mbuf *m0)
{
	struct mbuf	*m = NULL;
	int		 error = 0;

	if (unit->raw != NULL && NG_HOOK_IS_VALID(unit->raw)) {
		m = m_dup(m0, M_DONTWAIT);
		if (m != NULL)
			NG_SEND_DATA_ONLY(error, unit->raw, m);

		if (error != 0)
			NG_HCI_INFO(
"%s: %s - Could not forward packet, error=%d\n",
				__func__, NG_NODE_NAME(unit->node), error);
	}
} /* ng_hci_mtap */
예제 #6
0
/*
 * Ethernet output routine.
 * Encapsulate a packet of type family for the local net.
 * Use trailer local net encapsulation if enough data in first
 * packet leaves a multiple of 512 bytes of data in remainder.
 */
int
ether_output(struct ifnet *ifp, struct mbuf *m,
	const struct sockaddr *dst, struct route *ro)
{
	short type;
	int error = 0, hdrcmplt = 0;
	u_char esrc[ETHER_ADDR_LEN], edst[ETHER_ADDR_LEN];
	struct llentry *lle = NULL;
	struct rtentry *rt0 = NULL;
	struct ether_header *eh;
	struct pf_mtag *t;
	int loop_copy = 1;
	int hlen;	/* link layer header length */

	if (ro != NULL) {
		if (!(m->m_flags & (M_BCAST | M_MCAST)))
			lle = ro->ro_lle;
		rt0 = ro->ro_rt;
	}
#ifdef MAC
	error = mac_ifnet_check_transmit(ifp, m);
	if (error)
		senderr(error);
#endif

	M_PROFILE(m);
	if (ifp->if_flags & IFF_MONITOR)
		senderr(ENETDOWN);
	if (!((ifp->if_flags & IFF_UP) &&
	    (ifp->if_drv_flags & IFF_DRV_RUNNING)))
		senderr(ENETDOWN);

	hlen = ETHER_HDR_LEN;
	switch (dst->sa_family) {
#ifdef INET
	case AF_INET:
		if (lle != NULL && (lle->la_flags & LLE_VALID))
			memcpy(edst, &lle->ll_addr.mac16, sizeof(edst));
		else
			error = arpresolve(ifp, rt0, m, dst, edst, &lle);
		if (error)
			return (error == EWOULDBLOCK ? 0 : error);
		type = htons(ETHERTYPE_IP);
		break;
	case AF_ARP:
	{
		struct arphdr *ah;
		ah = mtod(m, struct arphdr *);
		ah->ar_hrd = htons(ARPHRD_ETHER);

		loop_copy = 0; /* if this is for us, don't do it */

		switch(ntohs(ah->ar_op)) {
		case ARPOP_REVREQUEST:
		case ARPOP_REVREPLY:
			type = htons(ETHERTYPE_REVARP);
			break;
		case ARPOP_REQUEST:
		case ARPOP_REPLY:
		default:
			type = htons(ETHERTYPE_ARP);
			break;
		}

		if (m->m_flags & M_BCAST)
			bcopy(ifp->if_broadcastaddr, edst, ETHER_ADDR_LEN);
		else
			bcopy(ar_tha(ah), edst, ETHER_ADDR_LEN);

	}
	break;
#endif
#ifdef INET6
	case AF_INET6:
		if (lle != NULL && (lle->la_flags & LLE_VALID))
			memcpy(edst, &lle->ll_addr.mac16, sizeof(edst));
		else
			error = nd6_storelladdr(ifp, m, dst, (u_char *)edst, &lle);
		if (error)
			return error;
		type = htons(ETHERTYPE_IPV6);
		break;
#endif
#ifdef IPX
	case AF_IPX:
		if (ef_outputp) {
		    error = ef_outputp(ifp, &m, dst, &type, &hlen);
		    if (error)
			goto bad;
		} else
		    type = htons(ETHERTYPE_IPX);
		bcopy(&((const struct sockaddr_ipx *)dst)->sipx_addr.x_host,
		    edst, sizeof (edst));
		break;
#endif
#ifdef NETATALK
	case AF_APPLETALK:
	  {
	    struct at_ifaddr *aa;

	    if ((aa = at_ifawithnet((const struct sockaddr_at *)dst)) == NULL)
		    senderr(EHOSTUNREACH); /* XXX */
	    if (!aarpresolve(ifp, m, (const struct sockaddr_at *)dst, edst)) {
		    ifa_free(&aa->aa_ifa);
		    return (0);
	    }
	    /*
	     * In the phase 2 case, need to prepend an mbuf for the llc header.
	     */
	    if ( aa->aa_flags & AFA_PHASE2 ) {
		struct llc llc;

		ifa_free(&aa->aa_ifa);
		M_PREPEND(m, LLC_SNAPFRAMELEN, M_NOWAIT);
		if (m == NULL)
			senderr(ENOBUFS);
		llc.llc_dsap = llc.llc_ssap = LLC_SNAP_LSAP;
		llc.llc_control = LLC_UI;
		bcopy(at_org_code, llc.llc_snap_org_code, sizeof(at_org_code));
		llc.llc_snap_ether_type = htons( ETHERTYPE_AT );
		bcopy(&llc, mtod(m, caddr_t), LLC_SNAPFRAMELEN);
		type = htons(m->m_pkthdr.len);
		hlen = LLC_SNAPFRAMELEN + ETHER_HDR_LEN;
	    } else {
		ifa_free(&aa->aa_ifa);
		type = htons(ETHERTYPE_AT);
	    }
	    break;
	  }
#endif /* NETATALK */

	case pseudo_AF_HDRCMPLT:
	    {
		const struct ether_header *eh;
		
		hdrcmplt = 1;
		eh = (const struct ether_header *)dst->sa_data;
		(void)memcpy(esrc, eh->ether_shost, sizeof (esrc));
		/* FALLTHROUGH */

	case AF_UNSPEC:
		loop_copy = 0; /* if this is for us, don't do it */
		eh = (const struct ether_header *)dst->sa_data;
		(void)memcpy(edst, eh->ether_dhost, sizeof (edst));
		type = eh->ether_type;
		break;
            }	
#ifdef MPLS
	case AF_MPLS:
		if (lle != NULL && (lle->la_flags & LLE_VALID))
			bcopy(&lle->ll_addr.mac16 , edst, sizeof(edst));
		else 
			error = mpls_arpresolve(ifp, rt0, m, dst, edst, &lle);
		if (error)
			return (error == EWOULDBLOCK ? 0 : error);
		
		if (m->m_flags & (M_BCAST | M_MCAST))
			type = htons(ETHERTYPE_MPLS_MCAST);
		else
			type = htons(ETHERTYPE_MPLS);				
		break;
#endif /* MPLS */	
	default:
		if_printf(ifp, "can't handle af%d\n", dst->sa_family);
		senderr(EAFNOSUPPORT);
	}

	if (lle != NULL && (lle->la_flags & LLE_IFADDR)) {
		update_mbuf_csumflags(m, m);
		return (if_simloop(ifp, m, dst->sa_family, 0));
	}

	/*
	 * Add local net header.  If no space in first mbuf,
	 * allocate another.
	 */
	M_PREPEND(m, ETHER_HDR_LEN, M_NOWAIT);
	if (m == NULL)
		senderr(ENOBUFS);
	eh = mtod(m, struct ether_header *);
	(void)memcpy(&eh->ether_type, &type,
		sizeof(eh->ether_type));
	(void)memcpy(eh->ether_dhost, edst, sizeof (edst));
	if (hdrcmplt)
		(void)memcpy(eh->ether_shost, esrc,
			sizeof(eh->ether_shost));
	else
		(void)memcpy(eh->ether_shost, IF_LLADDR(ifp),
			sizeof(eh->ether_shost));

	/*
	 * If a simplex interface, and the packet is being sent to our
	 * Ethernet address or a broadcast address, loopback a copy.
	 * XXX To make a simplex device behave exactly like a duplex
	 * device, we should copy in the case of sending to our own
	 * ethernet address (thus letting the original actually appear
	 * on the wire). However, we don't do that here for security
	 * reasons and compatibility with the original behavior.
	 */
	if ((ifp->if_flags & IFF_SIMPLEX) && loop_copy &&
	    ((t = pf_find_mtag(m)) == NULL || !t->routed)) {
		if (m->m_flags & M_BCAST) {
			struct mbuf *n;

			/*
			 * Because if_simloop() modifies the packet, we need a
			 * writable copy through m_dup() instead of a readonly
			 * one as m_copy[m] would give us. The alternative would
			 * be to modify if_simloop() to handle the readonly mbuf,
			 * but performancewise it is mostly equivalent (trading
			 * extra data copying vs. extra locking).
			 *
			 * XXX This is a local workaround.  A number of less
			 * often used kernel parts suffer from the same bug.
			 * See PR kern/105943 for a proposed general solution.
			 */
			if ((n = m_dup(m, M_NOWAIT)) != NULL) {
				update_mbuf_csumflags(m, n);
				(void)if_simloop(ifp, n, dst->sa_family, hlen);
			} else
				ifp->if_iqdrops++;
		} else if (bcmp(eh->ether_dhost, eh->ether_shost,
				ETHER_ADDR_LEN) == 0) {
			update_mbuf_csumflags(m, m);
			(void) if_simloop(ifp, m, dst->sa_family, hlen);
			return (0);	/* XXX */
		}
	}

   /*
	* Bridges require special output handling.
	*/
	if (ifp->if_bridge) {
		BRIDGE_OUTPUT(ifp, m, error);
		return (error);
	}

#if defined(INET) || defined(INET6)
	if (ifp->if_carp &&
	    (error = (*carp_output_p)(ifp, m, dst)))
		goto bad;
#endif

	/* Handle ng_ether(4) processing, if any */
	if (IFP2AC(ifp)->ac_netgraph != NULL) {
		KASSERT(ng_ether_output_p != NULL,
		    ("ng_ether_output_p is NULL"));
		if ((error = (*ng_ether_output_p)(ifp, &m)) != 0) {
bad:			if (m != NULL)
				m_freem(m);
			return (error);
		}
		if (m == NULL)
			return (0);
	}

	/* Continue with link-layer output */
	return ether_output_frame(ifp, m);
}
예제 #7
0
/*
 * Ethernet output routine.
 * Encapsulate a packet of type family for the local net.
 * Use trailer local net encapsulation if enough data in first
 * packet leaves a multiple of 512 bytes of data in remainder.
 */
int
ether_output(struct ifnet *ifp, struct mbuf *m,
	const struct sockaddr *dst, struct route *ro)
{
	short type;
	int error = 0, hdrcmplt = 0;
	u_char edst[ETHER_ADDR_LEN];
	struct llentry *lle = NULL;
	struct rtentry *rt0 = NULL;
	struct ether_header *eh;
	struct pf_mtag *t;
	int loop_copy = 1;
	int hlen;	/* link layer header length */
	int is_gw = 0;
	uint32_t pflags = 0;

	if (ro != NULL) {
		if (!(m->m_flags & (M_BCAST | M_MCAST))) {
			lle = ro->ro_lle;
			if (lle != NULL)
				pflags = lle->la_flags;
		}
		rt0 = ro->ro_rt;
		if (rt0 != NULL && (rt0->rt_flags & RTF_GATEWAY) != 0)
			is_gw = 1;
	}
#ifdef MAC
	error = mac_ifnet_check_transmit(ifp, m);
	if (error)
		senderr(error);
#endif

	M_PROFILE(m);
	if (ifp->if_flags & IFF_MONITOR)
		senderr(ENETDOWN);
	if (!((ifp->if_flags & IFF_UP) &&
	    (ifp->if_drv_flags & IFF_DRV_RUNNING)))
		senderr(ENETDOWN);

	hlen = ETHER_HDR_LEN;
	switch (dst->sa_family) {
#ifdef INET
	case AF_INET:
		if (lle != NULL && (pflags & LLE_VALID) != 0)
			memcpy(edst, &lle->ll_addr.mac16, sizeof(edst));
		else
			error = arpresolve(ifp, is_gw, m, dst, edst, &pflags);
		if (error)
			return (error == EWOULDBLOCK ? 0 : error);
		type = htons(ETHERTYPE_IP);
		break;
	case AF_ARP:
	{
		struct arphdr *ah;
		ah = mtod(m, struct arphdr *);
		ah->ar_hrd = htons(ARPHRD_ETHER);

		loop_copy = 0; /* if this is for us, don't do it */

		switch(ntohs(ah->ar_op)) {
		case ARPOP_REVREQUEST:
		case ARPOP_REVREPLY:
			type = htons(ETHERTYPE_REVARP);
			break;
		case ARPOP_REQUEST:
		case ARPOP_REPLY:
		default:
			type = htons(ETHERTYPE_ARP);
			break;
		}

		if (m->m_flags & M_BCAST)
			bcopy(ifp->if_broadcastaddr, edst, ETHER_ADDR_LEN);
		else
			bcopy(ar_tha(ah), edst, ETHER_ADDR_LEN);

	}
	break;
#endif
#ifdef INET6
	case AF_INET6:
		if (lle != NULL && (pflags & LLE_VALID))
			memcpy(edst, &lle->ll_addr.mac16, sizeof(edst));
		else
			error = nd6_resolve(ifp, is_gw, m, dst, (u_char *)edst,
			    &pflags);
		if (error)
			return (error == EWOULDBLOCK ? 0 : error);
		type = htons(ETHERTYPE_IPV6);
		break;
#endif
	case pseudo_AF_HDRCMPLT:
	    {
		const struct ether_header *eh;

		hdrcmplt = 1;
		/* FALLTHROUGH */

	case AF_UNSPEC:
		loop_copy = 0; /* if this is for us, don't do it */
		eh = (const struct ether_header *)dst->sa_data;
		(void)memcpy(edst, eh->ether_dhost, sizeof (edst));
		type = eh->ether_type;
		break;
            }
	default:
		if_printf(ifp, "can't handle af%d\n", dst->sa_family);
		senderr(EAFNOSUPPORT);
	}

	if ((pflags & LLE_IFADDR) != 0) {
		update_mbuf_csumflags(m, m);
		return (if_simloop(ifp, m, dst->sa_family, 0));
	}

	/*
	 * Add local net header.  If no space in first mbuf,
	 * allocate another.
	 */
	M_PREPEND(m, ETHER_HDR_LEN, M_NOWAIT);
	if (m == NULL)
		senderr(ENOBUFS);
	eh = mtod(m, struct ether_header *);
	if (hdrcmplt == 0) {
		memcpy(&eh->ether_type, &type, sizeof(eh->ether_type));
		memcpy(eh->ether_dhost, edst, sizeof (edst));
		memcpy(eh->ether_shost, IF_LLADDR(ifp),sizeof(eh->ether_shost));
	}

	/*
	 * If a simplex interface, and the packet is being sent to our
	 * Ethernet address or a broadcast address, loopback a copy.
	 * XXX To make a simplex device behave exactly like a duplex
	 * device, we should copy in the case of sending to our own
	 * ethernet address (thus letting the original actually appear
	 * on the wire). However, we don't do that here for security
	 * reasons and compatibility with the original behavior.
	 */
	if ((ifp->if_flags & IFF_SIMPLEX) && loop_copy &&
	    ((t = pf_find_mtag(m)) == NULL || !t->routed)) {
		if (m->m_flags & M_BCAST) {
			struct mbuf *n;

			/*
			 * Because if_simloop() modifies the packet, we need a
			 * writable copy through m_dup() instead of a readonly
			 * one as m_copy[m] would give us. The alternative would
			 * be to modify if_simloop() to handle the readonly mbuf,
			 * but performancewise it is mostly equivalent (trading
			 * extra data copying vs. extra locking).
			 *
			 * XXX This is a local workaround.  A number of less
			 * often used kernel parts suffer from the same bug.
			 * See PR kern/105943 for a proposed general solution.
			 */
			if ((n = m_dup(m, M_NOWAIT)) != NULL) {
				update_mbuf_csumflags(m, n);
				(void)if_simloop(ifp, n, dst->sa_family, hlen);
			} else
				if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
		} else if (bcmp(eh->ether_dhost, eh->ether_shost,
				ETHER_ADDR_LEN) == 0) {
			update_mbuf_csumflags(m, m);
			(void) if_simloop(ifp, m, dst->sa_family, hlen);
			return (0);	/* XXX */
		}
	}

       /*
	* Bridges require special output handling.
	*/
	if (ifp->if_bridge) {
		BRIDGE_OUTPUT(ifp, m, error);
		return (error);
	}

#if defined(INET) || defined(INET6)
	if (ifp->if_carp &&
	    (error = (*carp_output_p)(ifp, m, dst)))
		goto bad;
#endif

	/* Handle ng_ether(4) processing, if any */
	if (ifp->if_l2com != NULL) {
		KASSERT(ng_ether_output_p != NULL,
		    ("ng_ether_output_p is NULL"));
		if ((error = (*ng_ether_output_p)(ifp, &m)) != 0) {
bad:			if (m != NULL)
				m_freem(m);
			return (error);
		}
		if (m == NULL)
			return (0);
	}

	/* Continue with link-layer output */
	return ether_output_frame(ifp, m);
}
예제 #8
0
파일: ng_tee.c 프로젝트: MarginC/kame
/*
 * Receive data on a hook
 *
 * If data comes in the right link send a copy out right2left, and then
 * send the original onwards out through the left link.
 * Do the opposite for data coming in from the left link.
 * Data coming in right2left or left2right is forwarded
 * on through the appropriate destination hook as if it had come
 * from the other side.
 */
static int
ngt_rcvdata(hook_p hook, item_p item)
{
	const sc_p sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
	struct hookinfo *const hinfo = NG_HOOK_PRIVATE(hook);
	struct hookinfo *dest;
	struct hookinfo *dup;
	int error = 0;
	struct mbuf *m;
	meta_p meta;

	m = NGI_M(item);
	meta = NGI_META(item); /* leave these owned by the item */
	/* Which hook? */
	if (hinfo == &sc->left) {
		dup = &sc->left2right;
		dest = &sc->right;
	} else if (hinfo == &sc->right) {
		dup = &sc->right2left;
		dest = &sc->left;
	} else if (hinfo == &sc->right2left) {
		dup = NULL;
		dest = &sc->right;
	} else if (hinfo == &sc->left2right) {
		dup = NULL;
		dest = &sc->left;
	} else {
		panic("%s: no hook!", __func__);
#ifdef	RESTARTABLE_PANICS
		return(EINVAL);
#endif
	}

	/* Update stats on incoming hook */
	hinfo->stats.inOctets += m->m_pkthdr.len;
	hinfo->stats.inFrames++;

	/*
	 * Don't make a copy if only the dup hook exists.
	 */
	if ((dup && dup->hook) && (dest->hook == NULL)) {
		dest = dup;
		dup = NULL;
	}

	/* Duplicate packet and meta info if requried */
	if (dup != NULL) {
		struct mbuf *m2;
		meta_p meta2;

		/* Copy packet (failure will not stop the original)*/
		m2 = m_dup(m, M_NOWAIT);
		if (m2) {

			/* Copy meta info */
			/* If we can't get a copy, tough.. */
			if (meta != NULL) {
				meta2 = ng_copy_meta(meta);
			} else
				meta2 = NULL;

			/* Deliver duplicate */
			dup->stats.outOctets += m->m_pkthdr.len;
			dup->stats.outFrames++;
			NG_SEND_DATA(error, dup->hook, m2, meta2);
		}
	}
	/* Deliver frame out destination hook */
	dest->stats.outOctets += m->m_pkthdr.len;
	dest->stats.outFrames++;
	if (dest->hook)
		NG_FWD_ITEM_HOOK(error, item, dest->hook);
	else
		NG_FREE_ITEM(item);
	return (0);
}
예제 #9
0
/*
 * ensure that [off, off + len) is contiguous on the mbuf chain "m".
 * packet chain before "off" is kept untouched.
 * if offp == NULL, the target will start at <retval, 0> on resulting chain.
 * if offp != NULL, the target will start at <retval, *offp> on resulting chain.
 *
 * on error return (NULL return value), original "m" will be freed.
 *
 * XXX M_TRAILINGSPACE/M_LEADINGSPACE on shared cluster (sharedcluster)
 */
struct mbuf *
m_pulldown(struct mbuf *m, int off, int len, int *offp)
{
	struct mbuf *n, *o;
	int hlen, tlen, olen;
	int sharedcluster;

	/* check invalid arguments. */
	if (m == NULL)
		panic("m == NULL in m_pulldown()");
	if (len > MCLBYTES) {
		m_freem(m);
		return NULL;	/* impossible */
	}

	n = m;
	while (n != NULL && off > 0) {
		if (n->m_len > off)
			break;
		off -= n->m_len;
		n = n->m_next;
	}
	/* be sure to point non-empty mbuf */
	while (n != NULL && n->m_len == 0)
		n = n->m_next;
	if (!n) {
		m_freem(m);
		return NULL;	/* mbuf chain too short */
	}

	sharedcluster = M_READONLY(n);

	/*
	 * the target data is on <n, off>.
	 * if we got enough data on the mbuf "n", we're done.
	 */
	if ((off == 0 || offp) && len <= n->m_len - off && !sharedcluster)
		goto ok;

	/*
	 * when len <= n->m_len - off and off != 0, it is a special case.
	 * len bytes from <n, off> sits in single mbuf, but the caller does
	 * not like the starting position (off).
	 * chop the current mbuf into two pieces, set off to 0.
	 */
	if (len <= n->m_len - off) {
		struct mbuf *mlast;

		o = m_dup(n, off, n->m_len - off, M_DONTWAIT);
		if (o == NULL) {
			m_freem(m);
			return NULL;	/* ENOBUFS */
		}
		KASSERT(o->m_len >= len);
		for (mlast = o; mlast->m_next != NULL; mlast = mlast->m_next)
			;
		n->m_len = off;
		mlast->m_next = n->m_next;
		n->m_next = o;
		n = o;
		off = 0;
		goto ok;
	}

	/*
	 * we need to take hlen from <n, off> and tlen from <n->m_next, 0>,
	 * and construct contiguous mbuf with m_len == len.
	 * note that hlen + tlen == len, and tlen > 0.
	 */
	hlen = n->m_len - off;
	tlen = len - hlen;

	/*
	 * ensure that we have enough trailing data on mbuf chain.
	 * if not, we can do nothing about the chain.
	 */
	olen = 0;
	for (o = n->m_next; o != NULL; o = o->m_next)
		olen += o->m_len;
	if (hlen + olen < len) {
		m_freem(m);
		return NULL;	/* mbuf chain too short */
	}

	/*
	 * easy cases first.
	 * we need to use m_copydata() to get data from <n->m_next, 0>.
	 */
	if ((off == 0 || offp) && M_TRAILINGSPACE(n) >= tlen &&
	    !sharedcluster) {
		m_copydata(n->m_next, 0, tlen, mtod(n, char *) + n->m_len);
		n->m_len += tlen;
		m_adj(n->m_next, tlen);
		goto ok;
	}
예제 #10
0
int
ng_hci_send_command(ng_hci_unit_p unit)
{
	struct mbuf	*m0 = NULL, *m = NULL;
	int		 free, error = 0;

	/* Check if other command is pending */
	if (unit->state & NG_HCI_UNIT_COMMAND_PENDING)
		return (0);

	/* Check if unit can accept our command */
	NG_HCI_BUFF_CMD_GET(unit->buffer, free);
	if (free == 0)
		return (0);

	/* Check if driver hook is still ok */
	if (unit->drv == NULL || NG_HOOK_NOT_VALID(unit->drv)) {
		NG_HCI_WARN(
"%s: %s - hook \"%s\" is not connected or valid\n",
			__func__, NG_NODE_NAME(unit->node), NG_HCI_HOOK_DRV);

		NG_BT_MBUFQ_DRAIN(&unit->cmdq);

		return (ENOTCONN);
	}

	/* 
	 * Get first command from queue, give it to RAW hook then 
	 * make copy of it and send it to the driver
	 */

	m0 = NG_BT_MBUFQ_FIRST(&unit->cmdq);
	if (m0 == NULL)
		return (0);

	ng_hci_mtap(unit, m0);

	m = m_dup(m0, MB_DONTWAIT);
	if (m != NULL)
		NG_SEND_DATA_ONLY(error, unit->drv, m);
	else
		error = ENOBUFS;

	if (error != 0)
		NG_HCI_ERR(
"%s: %s - could not send HCI command, error=%d\n",
			__func__, NG_NODE_NAME(unit->node), error);

	/*
	 * Even if we were not able to send command we still pretend
	 * that everything is OK and let timeout handle that.
	 */

	NG_HCI_BUFF_CMD_USE(unit->buffer, 1);
	NG_HCI_STAT_CMD_SENT(unit->stat);
	NG_HCI_STAT_BYTES_SENT(unit->stat, m0->m_pkthdr.len);

	/*
	 * Note: ng_hci_command_timeout() will set 
	 * NG_HCI_UNIT_COMMAND_PENDING flag
	 */

	ng_hci_command_timeout(unit);

	return (0);
} /* ng_hci_send_command */