static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
struct device *parent,
struct device_node *np,
struct macio_dev *in_bay,
struct resource *parent_res)
{
struct macio_dev *dev;
const u32 *reg;
if (np == NULL)
return NULL;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
dev->bus = &chip->lbus;
dev->media_bay = in_bay;
dev->ofdev.dev.of_node = np;
dev->ofdev.archdata.dma_mask = 0xffffffffUL;
dev->ofdev.dev.dma_mask = &dev->ofdev.archdata.dma_mask;
dev->ofdev.dev.parent = parent;
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
dev->ofdev.dev.dma_parms = &dev->dma_parms;
/* Standard DMA paremeters */
dma_set_max_seg_size(&dev->ofdev.dev, 65536);
dma_set_seg_boundary(&dev->ofdev.dev, 0xffffffff);
#ifdef CONFIG_PCI
/* Set the DMA ops to the ones from the PCI device, this could be
* fishy if we didn't know that on PowerMac it's always direct ops
* or iommu ops that will work fine
*/
dev->ofdev.dev.archdata.dma_ops =
chip->lbus.pdev->dev.archdata.dma_ops;
dev->ofdev.dev.archdata.dma_data =
chip->lbus.pdev->dev.archdata.dma_data;
#endif /* CONFIG_PCI */
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
#endif
/* MacIO itself has a different reg, we use it's PCI base */
if (np == chip->of_node) {
dev_set_name(&dev->ofdev.dev, "%1d.%08x:%.*s",
chip->lbus.index,
#ifdef CONFIG_PCI
(unsigned int)pci_resource_start(chip->lbus.pdev, 0),
#else
0, /* NuBus may want to do something better here */
#endif
MAX_NODE_NAME_SIZE, np->name);
} else {
reg = of_get_property(np, "reg", NULL);
dev_set_name(&dev->ofdev.dev, "%1d.%08x:%.*s",
chip->lbus.index,
reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
}
/* Setup interrupts & resources */
macio_setup_interrupts(dev);
macio_setup_resources(dev, parent_res);
macio_add_missing_resources(dev);
/* Register with core */
if (of_device_register(&dev->ofdev) != 0) {
printk(KERN_DEBUG"macio: device registration error for %s!\n",
dev_name(&dev->ofdev.dev));
kfree(dev);
return NULL;
}
return dev;
}
/**
* macio_add_one_device - Add one device from OF node to the device tree
* @chip: pointer to the macio_chip holding the device
* @np: pointer to the device node in the OF tree
* @in_bay: set to 1 if device is part of a media-bay
*
* When media-bay is changed to hotswap drivers, this function will
* be exposed to the bay driver some way...
*/
static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
struct device *parent,
struct device_node *np,
struct macio_dev *in_bay,
struct resource *parent_res)
{
struct macio_dev *dev;
const u32 *reg;
if (np == NULL)
return NULL;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
dev->bus = &chip->lbus;
dev->media_bay = in_bay;
dev->ofdev.node = np;
dev->ofdev.dma_mask = 0xffffffffUL;
dev->ofdev.dev.dma_mask = &dev->ofdev.dma_mask;
dev->ofdev.dev.parent = parent;
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
#endif
/* MacIO itself has a different reg, we use it's PCI base */
if (np == chip->of_node) {
dev_set_name(&dev->ofdev.dev, "%1d.%08x:%.*s",
chip->lbus.index,
#ifdef CONFIG_PCI
(unsigned int)pci_resource_start(chip->lbus.pdev, 0),
#else
0, /* NuBus may want to do something better here */
#endif
MAX_NODE_NAME_SIZE, np->name);
} else {
reg = of_get_property(np, "reg", NULL);
dev_set_name(&dev->ofdev.dev, "%1d.%08x:%.*s",
chip->lbus.index,
reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
}
/* Setup interrupts & resources */
macio_setup_interrupts(dev);
macio_setup_resources(dev, parent_res);
macio_add_missing_resources(dev);
/* Register with core */
if (of_device_register(&dev->ofdev) != 0) {
printk(KERN_DEBUG"macio: device registration error for %s!\n",
dev_name(&dev->ofdev.dev));
kfree(dev);
return NULL;
}
return dev;
}