static void Ti3026_restore(struct matrox_fb_info *minfo)
{
int i;
unsigned char progdac[6];
struct matrox_hw_state *hw = &minfo->hw;
CRITFLAGS
DBG(__func__)
#ifdef DEBUG
;
for (i = 0; i < 6; i++)
;
;
#endif
CRITBEGIN
pci_write_config_dword(minfo->pcidev, PCI_OPTION_REG, hw->MXoptionReg);
CRITEND
matroxfb_vgaHWrestore(minfo);
CRITBEGIN
minfo->crtc1.panpos = -1;
for (i = 0; i < 6; i++)
mga_setr(M_EXTVGA_INDEX, i, hw->CRTCEXT[i]);
for (i = 0; i < 21; i++) {
outTi3026(minfo, DACseq[i], hw->DACreg[i]);
}
outTi3026(minfo, TVP3026_XPLLADDR, 0x00);
progdac[0] = inTi3026(minfo, TVP3026_XPIXPLLDATA);
progdac[3] = inTi3026(minfo, TVP3026_XLOOPPLLDATA);
outTi3026(minfo, TVP3026_XPLLADDR, 0x15);
progdac[1] = inTi3026(minfo, TVP3026_XPIXPLLDATA);
progdac[4] = inTi3026(minfo, TVP3026_XLOOPPLLDATA);
outTi3026(minfo, TVP3026_XPLLADDR, 0x2A);
progdac[2] = inTi3026(minfo, TVP3026_XPIXPLLDATA);
progdac[5] = inTi3026(minfo, TVP3026_XLOOPPLLDATA);
CRITEND
if (memcmp(hw->DACclk, progdac, 6)) {
/* agrhh... setting up PLL is very slow on Millennium... */
/* Mystique PLL is locked in few ms, but Millennium PLL lock takes about 0.15 s... */
/* Maybe even we should call schedule() ? */
CRITBEGIN
outTi3026(minfo, TVP3026_XCLKCTRL, hw->DACreg[POS3026_XCLKCTRL]);
outTi3026(minfo, TVP3026_XPLLADDR, 0x2A);
outTi3026(minfo, TVP3026_XLOOPPLLDATA, 0);
outTi3026(minfo, TVP3026_XPIXPLLDATA, 0);
outTi3026(minfo, TVP3026_XPLLADDR, 0x00);
for (i = 0; i < 3; i++)
outTi3026(minfo, TVP3026_XPIXPLLDATA, hw->DACclk[i]);
/* wait for PLL only if PLL clock requested (always for PowerMode, never for VGA) */
if (hw->MiscOutReg & 0x08) {
int tmout;
outTi3026(minfo, TVP3026_XPLLADDR, 0x3F);
for (tmout = 500000; tmout; --tmout) {
if (inTi3026(minfo, TVP3026_XPIXPLLDATA) & 0x40)
break;
udelay(10);
}
CRITEND
if (!tmout)
;
else
;
CRITBEGIN
}
static void Ti3026_restore(WPMINFO2) {
int i;
unsigned char progdac[6];
struct matrox_hw_state* hw = &ACCESS_FBINFO(hw);
CRITFLAGS
DBG(__func__)
#ifdef DEBUG
dprintk(KERN_INFO "EXTVGA regs: ");
for (i = 0; i < 6; i++)
dprintk("%02X:", hw->CRTCEXT[i]);
dprintk("\n");
#endif
CRITBEGIN
pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg);
CRITEND
matroxfb_vgaHWrestore(PMINFO2);
CRITBEGIN
ACCESS_FBINFO(crtc1.panpos) = -1;
for (i = 0; i < 6; i++)
mga_setr(M_EXTVGA_INDEX, i, hw->CRTCEXT[i]);
for (i = 0; i < 21; i++) {
outTi3026(PMINFO DACseq[i], hw->DACreg[i]);
}
outTi3026(PMINFO TVP3026_XPLLADDR, 0x00);
progdac[0] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
progdac[3] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
outTi3026(PMINFO TVP3026_XPLLADDR, 0x15);
progdac[1] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
progdac[4] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
outTi3026(PMINFO TVP3026_XPLLADDR, 0x2A);
progdac[2] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
progdac[5] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
CRITEND
if (memcmp(hw->DACclk, progdac, 6)) {
/* agrhh... setting up PLL is very slow on Millennium... */
/* Mystique PLL is locked in few ms, but Millennium PLL lock takes about 0.15 s... */
/* Maybe even we should call schedule() ? */
CRITBEGIN
outTi3026(PMINFO TVP3026_XCLKCTRL, hw->DACreg[POS3026_XCLKCTRL]);
outTi3026(PMINFO TVP3026_XPLLADDR, 0x2A);
outTi3026(PMINFO TVP3026_XLOOPPLLDATA, 0);
outTi3026(PMINFO TVP3026_XPIXPLLDATA, 0);
outTi3026(PMINFO TVP3026_XPLLADDR, 0x00);
for (i = 0; i < 3; i++)
outTi3026(PMINFO TVP3026_XPIXPLLDATA, hw->DACclk[i]);
/* wait for PLL only if PLL clock requested (always for PowerMode, never for VGA) */
if (hw->MiscOutReg & 0x08) {
int tmout;
outTi3026(PMINFO TVP3026_XPLLADDR, 0x3F);
for (tmout = 500000; tmout; --tmout) {
if (inTi3026(PMINFO TVP3026_XPIXPLLDATA) & 0x40)
break;
udelay(10);
}
CRITEND
if (!tmout)
printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n");
else
dprintk(KERN_INFO "PixelPLL: %d\n", 500000-tmout);
CRITBEGIN
}
