static void __init mop500_init_machine(void)
{
int i2c0_devs;
/*
* The HREFv60 board removed a GPIO expander and routed
* all these GPIO pins to the internal GPIO controller
* instead.
*/
if (machine_is_hrefv60())
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
else
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
u8500_init_devices();
mop500_pins_init();
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
mop500_i2c_init();
mop500_sdi_init();
mop500_spi_init();
mop500_uart_init();
platform_device_register(&ab8500_device);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
if (machine_is_hrefv60())
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
}
static void __init mop500_init_machine(void)
{
struct device *parent = NULL;
int i2c0_devs;
int i;
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
mop500_pinmaps_init();
parent = u8500_init_devices(&ab8500_platdata);
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init(parent);
mop500_sdi_init(parent);
mop500_spi_init(parent);
mop500_audio_init(parent);
mop500_uart_init(parent);
u8500_cryp1_hash1_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
static void __init mop500_init_machine(void)
{
struct device *parent = NULL;
int i;
platform_device_register(&db8500_prcmu_device);
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN;
sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
mop500_pinmaps_init();
parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init(parent);
mop500_sdi_init(parent);
mop500_spi_init(parent);
mop500_audio_init(parent);
mop500_uart_init(parent);
u8500_cryp1_hash1_init(parent);
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
static void __init mop500_init_machine(void)
{
int i2c0_devs;
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
u8500_init_devices();
mop500_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
mop500_sdi_init();
mop500_spi_init();
mop500_uart_init();
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
static void __init u8500_init_machine(void)
{
int i;
u8500_init_devices();
nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
/* Register the active AMBA devices on this board */
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
mop500_sdi_init();
/* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */
if (cpu_is_u8500ed() || cpu_is_u8500v10())
spi_register_board_info(ab8500_spi_devices,
ARRAY_SIZE(ab8500_spi_devices));
else /* If HW is v.1.1 or later use I2C to access AB8500 */
platform_device_register(&ab8500_device);
}
static void __init hrefv60_init_machine(void)
{
int i2c0_devs;
/*
* The HREFv60 board removed a GPIO expander and routed
* all these GPIO pins to the internal GPIO controller
* instead.
*/
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
u8500_init_devices();
hrefv60_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
mop500_sdi_init();
mop500_spi_init();
mop500_uart_init();
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
static void __init u8500_init_machine(void)
{
struct device *parent = NULL;
int i2c0_devs;
int i;
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
snowball_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
parent = u8500_of_init_devices();
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
/* automatically probe child nodes of db8500 device */
of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
if (of_machine_is_compatible("st-ericsson,mop500")) {
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
mop500_sdi_init(parent);
mop500_audio_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
mop500_uib_init();
} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
mop500_of_audio_init(parent);
} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
/*
* The HREFv60 board removed a GPIO expander and routed
* all these GPIO pins to the internal GPIO controller
* instead.
*/
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
mop500_uib_init();
}
/* This board has full regulator constraints */
regulator_has_full_constraints();
}