예제 #1
0
/*** Move cursor down/up one page ***/
void pg_updown(Project p, BYTE dir)
{
	LONG newtop = p->top_line, newcrs;

	if(dir>0)
		/* One page down */
		if(newtop+gui.nbline >= p->max_lines) newcrs = p->max_lines-1;
		else {
			newtop += gui.nbline;
			if(newtop+gui.nbline >= p->max_lines)
				newtop = p->max_lines - gui.nbline;
			newcrs = newtop - p->top_line + p->nbl;
		}
	else
		/* One page up */
		if(newtop == 0) newcrs=0;
		else {
			newtop -= gui.nbline;
			if(newtop<0) newtop=0;
			newcrs = newtop - p->top_line + p->nbl;
		}
	if(newcrs != p->nbl) inv_curs(p,FALSE),set_cursor_line(p,newcrs,newtop);
	scroll_xy(p,center_horiz(p),newtop,TRUE);
	if(p->ccp.select) move_selection(p, p->nbrc, p->nbl);
	inv_curs(p,TRUE);
	draw_info( p );
}
예제 #2
0
/*** Move cursor down ***/
void curs_down(Project p)
{
	LINE *ln;
	if( ( ln = p->edited->next) )
	{
		LONG newx; BYTE scroll=0;

		inv_curs(p, FALSE);
		/* Is the cursor at the bottom of the display? */
		if( p->ycurs < gui.botcurs) p->ycurs += YSIZE;
		else scroll=1;

		p->nbl++; p->edited=ln;
		p->nbrc = adjust_rc(ln, p->nbrwc, &p->nbc, FALSE);
		p->xcurs = (p->nbrc-p->left_pos)*XSIZE + gui.left;

		/* Minimise calls to scroll_xy */
		if((newx=center_horiz(p))!=p->left_pos || scroll)
			scroll_xy(p, newx, p->top_line+scroll, scroll);

		/* Update selection */
		if(p->ccp.select) move_selection(p, p->nbrc, p->nbl);
		inv_curs(p, TRUE);
		draw_info( p );
	}
}
예제 #3
0
/*** Jump the cursor far left or far right ***/
void jump_horiz(Project p, BYTE dir)
{
	if( dir >= 0 )
	{
		/* If cursor is already at rightmost position, scroll display */
		if( p->nbrwc == p->left_pos+gui.nbcol-1 )
		{
			p->nbrwc += gui.nbcol-1;
		}
		else p->nbrwc = p->left_pos+gui.nbcol-1;
	} else {
		/* Check if cursor is already at leftmost position */
		if( p->nbrwc == p->left_pos )
		{
			p->nbrwc = p->left_pos - (gui.nbcol-1);
			if( (LONG)p->nbrwc < 0 ) p->nbrwc = 0;
		}
		else p->nbrwc = p->left_pos;
	}

	inv_curs(p,FALSE);
	p->nbrc  = adjust_rc(p->edited, p->nbrwc, &p->nbc, dir<0);
	p->xcurs = (p->nbrc-p->left_pos)*XSIZE + gui.left;
	{
		LONG newleft = center_horiz( p );
		if( newleft != p->left_pos )
			scroll_xy(p, newleft, p->top_line, 0);
	}
	/* Move selection or cursor? */
	if(p->ccp.select) move_selection(p, p->nbrwc, p->nbl);
	inv_curs(p,TRUE);
	draw_info( p );
}
예제 #4
0
/*** Move cursor to absolute position ***/
void move_to_line(Project p, ULONG nbline, char dirtiness)
{
	ULONG newtop;

	if(!p->ccp.select) inv_curs(p,FALSE);
	/* Get the new top line */
	{	register ULONG old_nbl = p->nbl;
		p->nbl = nbline;
		newtop = center_vert(p);
		p->nbl = old_nbl;
	}	set_cursor_line(p, nbline, newtop);

	if(dirtiness == LINE_AS_IS)
		scroll_xy(p, center_horiz(p), newtop, TRUE);
	else
	{
		/* Some lines are modified: redraw in one pass */
		if( newtop == p->top_line ) {
			REDRAW_CURLINE(p);
			if( dirtiness == LINES_DIRTY )
				scroll_up(p, p->edited->next, p->ycurs, center_horiz(p)),
				prop_adj(p);
			else if( p->left_pos != (newtop = center_horiz(p)) )
				scroll_xy(p, newtop, p->top_line, FALSE);
		}
		else if( dirtiness == LINE_DIRTY )
			scroll_xy(p, center_horiz(p), newtop, TRUE);
		else
			set_top_line(p, newtop, center_horiz(p));
	}
	/* Move cursor or selection */
	if(p->ccp.select) move_selection(p, p->nbrwc, p->nbl);
	inv_curs(p,TRUE);
	draw_info( p );
}
예제 #5
0
/*** Move cursor up ***/
void curs_up(Project p)
{
	LINE *ln;
	if( ( ln = p->edited->prev) )
	{
		LONG newx; BYTE scroll=0;

		inv_curs(p, FALSE);
		/* Is the cursor on top of display? */
		if(p->ycurs > gui.topcurs) p->ycurs -= YSIZE;
		else scroll=1;

		p->nbl--; p->edited=ln;
		p->nbrc  = adjust_rc(ln, p->nbrwc, &p->nbc, FALSE);
		p->xcurs = (p->nbrc-p->left_pos)*XSIZE + gui.left;

		/* If cursor exits edit area due to horizontal **
		** adjustment, scroll the display accordingly: */
		if((newx=center_horiz(p))!=p->left_pos || scroll)
			scroll_xy(p, newx, p->top_line-scroll, scroll);

		/* Update selection */
		if(p->ccp.select) move_selection(p, p->nbrc, p->nbl);
		inv_curs(p, TRUE);
		draw_info( p );
	}
}
예제 #6
0
void enter_archive(const char *name, struct_panel *panel, int update_config)
{
  char *saved_work_dir=xgetcwd(NULL);
  #ifdef debug_printf
  printf("Entering into '%s'\n", name);
  #endif
  (void)chdir(panel->path); /* Переходим в каталог где лежит архив */
  if (get_archive_list(name, panel->archive_list))
  {
    char *text;
    if(update_config)
    {
      panel->archive_depth++;
      strcpy(panel->archive_stack[panel->archive_depth], name);
      if ( panel == &top_panel )
        write_archive_stack("top_panel.archive_stack", &top_panel);
      else
        write_archive_stack("bottom_panel.archive_stack", &bottom_panel);
      (void)chdir(saved_work_dir); /* Переходим в каталог откуда нас дёрнули */
    }
    update(panel); /* Строим список */
    move_selection("1", panel); /* Переходим на первый же файл в списке, чтобы не прокручивать */
    text=xconcat_path_file(panel->archive_stack[panel->archive_depth],panel->archive_cwd);
    gtk_label_set_text (GTK_LABEL(panel->path_label), text); /* Пишем имя архива с путём в поле снизу */
    free(text);
  }
  free(saved_work_dir);
}
예제 #7
0
void leave_archive(struct_panel *panel)
{
  char *iter;
  TRACE("Leaving archive '%s' to dir '%s'\n",panel->archive_stack[panel->archive_depth], panel->path);

  panel->archive_depth=panel->archive_depth-1;
  archive_list_free(panel->archive_list);
  if (panel->archive_depth > 0) /* Если мы ешё не достигли ФС */
  {
    (void)remove(panel->archive_stack[panel->archive_depth+1]); /* То удаляем архив который покинули - он был вложеным! */
    enter_archive(panel->archive_stack[panel->archive_depth], panel, FALSE);
  }
  else
  {
    update(panel); /* Обновляем список файлов */
    gtk_label_set_text (GTK_LABEL(panel->path_label), panel->path); /* Пишем текущий каталог в поле снизу */
  }
  TRACE("move_selection call '%s'\n",panel->archive_stack[panel->archive_depth+1]);
  iter=iter_from_filename (panel->archive_stack[panel->archive_depth+1], panel);
  move_selection(iter, panel); /* И выбираем файл архива курсором FIXME: Сработает только если покинутый вложенный архив в корне родительского архива, или же при покидании архива в реальную ФС. FIXME: этот прискорбный баг породит глюки при автоматическом переходе в следующий каталог! */
  free(iter);
  panel->archive_stack[panel->archive_depth+1][0]='\0'; /*Затираем имя покидаемого архива в стеке */
  if (panel == &top_panel)
  {
    write_archive_stack("top_panel.archive_stack", &top_panel);
    write_config_string("top_panel.archive_cwd", ""); /* FIXME: По идее надо бы завести ещё и стек путей в архивах, но это геморно( */
  }
  else
  {
    write_archive_stack("bottom_panel.archive_stack", &bottom_panel);
    write_config_string("bottom_panel.archive_cwd", "");
  }
}
예제 #8
0
// ----------------------------------------------------------------------
// Move the selection N slots but never stop on a sleeping army
// ----------------------------------------------------------------------
void t_army_list_window::move_selection_over_sleepers( int step_size, bool wrap_selection )
{ 
	t_army * army = 0;
	int increment_count = 0; // avoid infinite loops

	do {
		army = move_selection( step_size, wrap_selection );
		increment_count += step_size;
	} while( increment_count < m_armies->size() && army->get_sleeping() );

	select( 0, m_selected_army - m_first_army );
}
예제 #9
0
void file_menu::select_file(const std::string& begin_of_filename)
{
	size_t additional_index = is_root(current_dir_) ? 0 : 1;
	std::vector<std::string>::iterator it;
	it = std::find_if(dirs_in_current_dir_.begin(), dirs_in_current_dir_.end(), match_begin(begin_of_filename));
	if (it != dirs_in_current_dir_.end())
	{
		type_a_head_ = additional_index + it - dirs_in_current_dir_.begin();
		move_selection(type_a_head_);
		return;
	}
	additional_index += dirs_in_current_dir_.size();

	it = std::find_if(files_in_current_dir_.begin(), files_in_current_dir_.end(), match_begin(begin_of_filename));
	if (it != files_in_current_dir_.end())
	{
		type_a_head_ = it - files_in_current_dir_.begin() + additional_index;
		move_selection(type_a_head_);
		return;
    }
}
예제 #10
0
/*** Jump cursor to an absolute position in line (ie: beginning or end) ***/
void horiz_pos( Project p, ULONG newpos )
{
	if( newpos != p->nbrwc )
	{
		inv_curs(p, FALSE);
		p->nbrc = adjust_rc(p->edited, p->nbrwc = newpos, &p->nbc, FALSE);
		scroll_xy(p, center_horiz(p), p->top_line, FALSE);
		p->xcurs = (p->nbrc-p->left_pos)*XSIZE + gui.left;
		if(p->ccp.select) move_selection(p, p->nbrwc, p->nbl);
		inv_curs(p, TRUE);
		draw_info( p );
	}
}
예제 #11
0
int enter_archive(const char *name, struct_panel *panel, int update_config)
{
  char *saved_work_dir=xgetcwd(NULL);
  TRACE("Entering into '%s'\n", name);
  if (chdir(panel->path) == -1) /* Переходим в каталог где лежит архив */
  {
    char *message;
    asprintf(&message, UNABLE_TO_CHANGE_DIRECTORY_TO, panel->path, strerror(errno));
    Message(ERROR, message);
    free (message);
    return FALSE;
  }

  if (access(name, R_OK) == -1 )
  {
    char *message;
    asprintf(&message, UNABLE_TO_ACCESS_FILE, name, strerror(errno));
    Message(ERROR, message);
    free (message);
    return FALSE;
  }

  int res = FALSE;
  if (archive_supported(name))
  {
    char *text;
    if(update_config)
    {
      panel->archive_depth++;
      strcpy(panel->archive_stack[panel->archive_depth], name);
      if ( panel == &top_panel )
        write_archive_stack("top_panel.archive_stack", &top_panel);
      else
        write_archive_stack("bottom_panel.archive_stack", &bottom_panel);
      (void)chdir(saved_work_dir); /* Переходим в каталог откуда нас дёрнули */
    }
    panel->archive_list=archive_list_get(name);
    update(panel); /* Строим список */
    move_selection("0", panel); /* Переходим на первый же файл в списке */
    text=xconcat_path_file(panel->archive_stack[panel->archive_depth],panel->archive_cwd);
    gtk_label_set_text (GTK_LABEL(panel->path_label), text); /* Пишем имя архива с путём в поле снизу */
    free(text);
    res = TRUE;
  } else {
    TRACE("Archive is unsupported: %s", name);
  }
  free(saved_work_dir);
  return res;
}
예제 #12
0
static void lightout_post_action(struct module_configuration *mc, cairo_surface_t *cs, enum framework_action action) {
	const unsigned max_object=BOARD_W*BOARD_H;

	/* fprintf(stderr, "key = %d\n", action); */

	/* check that selection is in range */
	if(mc->current_selected_object<0 || (unsigned)mc->current_selected_object>=max_object) {
		mc->current_selected_object=BOARD_W*BOARD_H/2; /* highlight a default object */
	}

	switch(action) {
		case ACT_RIGHT:
			move_selection(mc, 1, 0);
			break;
		case ACT_LEFT:
			move_selection(mc, -1, 0);
			break;
		case ACT_UP:
			move_selection(mc, 0, -1);
			break;
		case ACT_DOWN:
			move_selection(mc, 0, 1);
			break;
		case ACT_SELECT: {
			unsigned x, y;
			x=mc->current_selected_object%BOARD_W;
			y=mc->current_selected_object/BOARD_W;
			lightout_do_move(x, y);
			break;
		}
		case ACT_NONE: ;
	}
	lightout_paint(mc, cs);

	lightout_do_if_win(mc, cs);
}
예제 #13
0
void archive_enter_subdir(const char *subdir, struct_panel *panel)
{
  char *path, *temp;
  TRACE("archive_enter_subdir '%s'\n", subdir);
  temp=panel->archive_cwd;
  panel->archive_cwd=xconcat(temp, subdir);
  free(temp);
  if ( panel == &top_panel )
    write_config_string("top_panel.archive_cwd", panel->archive_cwd);
  else
    write_config_string("bottom_panel.archive_cwd", panel->archive_cwd);
  update(panel); /* Перерисовываем список */
  move_selection("0", panel); /* Выбираем первый элемент */
  path=xconcat_path_file(panel->archive_stack[panel->archive_depth], panel->archive_cwd);
  gtk_label_set_text (GTK_LABEL(panel->path_label), path); /* Пишем имя архива с путём в поле снизу */
  free(path);
}
예제 #14
0
/*** Jump the cursor at bottom or top of display ***/
void jump_vert(Project p, BYTE dir)
{
	LONG newline, newtop=p->top_line;
	if( dir>=0 )
	{
		/* Move cursor to bottom of display or scroll one page if it's already here */
		newline=newtop+gui.nbline-1;
		if( p->nbl==newline )
			newline+=gui.nbline,
			newtop+=gui.nbline;

		/* Want to jump after the last line? */
		if(newline>=p->max_lines) {
			newline=p->max_lines-1;
			newtop=(p->top_line + gui.nbline > p->max_lines ? p->top_line : newline-gui.nbline+1);
			if(newtop<0) newtop=0;
		}
	}	else {
		/* Same fight with reverse direction */
		newline=newtop;
		if( p->nbl==newline ) {
			newtop-=gui.nbline;
			if(newtop<0) newtop=0;
			newline=newtop;
		}
	}
	/* Adjust display according to cursor position */
	if(newline != p->nbl) {
		inv_curs(p,FALSE);
		set_cursor_line(p, newline, newtop);

		/* Set the selection flags before to scroll display */
		if(p->ccp.select) move_selection(p, p->nbrwc, p->nbl);
		scroll_xy(p,center_horiz(p), newtop, TRUE);
		inv_curs(p,TRUE);
		draw_info( p );
	}
}
예제 #15
0
/*** One pos right ***/
void curs_right(Project p, BYTE word)
{
	if(p->nbc < p->edited->size)
	{
		inv_curs(p,FALSE);
		if(word) p->nbc = forward_word(p->edited, p->nbc); else p->nbc++;
		p->nbrwc = p->nbrc = x2pos(p->edited, p->nbc);
		p->xcurs = (p->nbrc-p->left_pos) * XSIZE + gui.left;

		/* Move the cursor */
		/* Is it gone outside edit area? */
		if(p->nbrc>=p->left_pos+gui.nbcol)
			scroll_xy(p, adjust_leftpos(p, gui.xstep), p->top_line, FALSE);

		if(p->ccp.select) move_selection(p, p->nbrc, p->nbl);
		inv_curs(p,TRUE);
		draw_info( p );
			
	}	else if(p->edited->next) {
		/* jump down to next line */
		p->nbrwc = 0;
		curs_down(p);
	}
}
예제 #16
0
void archive_go_upper(struct_panel *panel) /* Переходим на уровень выше внутри архива */
{
  if (panel->archive_cwd[0] == '\0') /* Если на верхнем уровне архива - то покидаем его*/
    leave_archive(panel);
  else /* А если нет - */
  {
    char *slash=NULL, *path, *iter;
    trim_line(panel->archive_cwd); /* Удяляем последний символ (слэш) из текущего имени */
    archive_cwd_prev=xconcat(basename(panel->archive_cwd),"/");
    slash=strrchr(panel->archive_cwd, '/'); /* Ищем последний слэш в пути */
    if (slash==NULL) /* Если значение пути вырождается в NULL (слэша больше не оказалось) то делаем archive_cwd нулевой строкой*/
      panel->archive_cwd[0]='\0';
    else /* А иначе просто обрезаем путь в архиве на один уровень */
      *(slash+1)='\0';

    if (panel == &top_panel)
    {
      write_config_string("top_panel.archive_cwd", panel->archive_cwd);
      top_panel.last_name[0]='\0';
      write_config_string("top_panel.last_name", top_panel.last_name);
    }
    else
    {
      write_config_string("bottom_panel.archive_cwd", panel->archive_cwd);
      bottom_panel.last_name[0]='\0';
      write_config_string("bottom_panel.last_name", bottom_panel.last_name);
    }
    update(panel); /* Перерисовываем список */
    iter=iter_from_filename (archive_cwd_prev, panel);
    move_selection(iter, panel); /* И выделяем предыдущий каталог в архиве */
    free(iter);
    path=xconcat_path_file(panel->archive_stack[panel->archive_depth],panel->archive_cwd);
    gtk_label_set_text (GTK_LABEL(panel->path_label), path); /* Пишем имя архива с путём в поле снизу */
    free(path);
  }
}
예제 #17
0
/*** Move cursor to the left ***/
void curs_left(Project p, BYTE word)
{
	register LINE *prev;
	if(p->nbc != 0)
	{
		inv_curs(p,FALSE);
		if(word) p->nbc = backward_word(p->edited, p->nbc-1); else p->nbc--;
		p->nbrwc = p->nbrc = x2pos(p->edited, p->nbc);
		p->xcurs = (p->nbrc-p->left_pos) * XSIZE + gui.left;

		/* Is it gone outside edit area? */
		if(p->nbrc<p->left_pos)
			scroll_xy(p, adjust_leftpos(p, -gui.xstep), p->top_line, FALSE);

		if(p->ccp.select) move_selection(p, p->nbrc, p->nbl);
		inv_curs(p,TRUE);
		draw_info( p );

	}	else if( ( prev = p->edited->prev ) ) {
		/* jump up */
		p->nbrwc = x2pos(prev, prev->size);
		curs_up(p);
	}
}
예제 #18
0
파일: Desktop.cpp 프로젝트: GustavoMOG/ede
int Desktop::handle(int event) {
	switch(event) {
		case FL_FOCUS:
		case FL_UNFOCUS:
		case FL_SHORTCUT:
			return 1;

		case FL_PUSH: {
			/*
			 * First check where we clicked. If we do it on desktop unfocus any possible focused childs, and handle
			 * specific clicks. Otherwise, do rest for childs.
			 */
			Fl_Widget* clicked = Fl::belowmouse();
			
			if(NOT_SELECTABLE(clicked)) {
				//E_DEBUG(E_STRLOC ": DESKTOP CLICK !!!\n");
				if(!selectionbuf.empty()) {
					/*
					 * Only focused are in selectionbuf, so this is fine to do; also will prevent 
					 * full redraw when is clicked on desktop
					 */
					unfocus_all();
					selectionbuf.clear();
				}

				/* track position so moving can be deduced */
				if(Fl::event_button() == 1) {
					selbox->x = Fl::event_x();
					selbox->y = Fl::event_y();
				} else if(Fl::event_button() == 3) {
					last_px = Fl::event_x();
					last_py = Fl::event_y();

					damage(EDE_DESKTOP_DAMAGE_OVERLAY);
					const edelib::MenuItem* item = dmenu->menu()->popup(Fl::event_x(), Fl::event_y());
					dmenu->picked(item);
				}

				return 1;
			}

			/* from here, all events are managed for icons */
			DesktopIcon* tmp_icon = (DesktopIcon*)clicked;

			/* do no use assertion on this, since fltk::belowmouse() can miss our icon */
			if(!tmp_icon) return 1;

			if(SELECTION_MULTI) {
				Fl::event_is_click(0);
				select(tmp_icon);
				return 1;
			} else if(SELECTION_SINGLE) {
				if(!in_selection(tmp_icon)) {
					select_only(tmp_icon);
				}
			} else if(Fl::event_button() == 3) {
				select_only(tmp_icon);
			}

			/* 
			 * Let child handle the rest.
			 * Also prevent click on other mouse buttons during move.
			 */
			if(!moving)
				tmp_icon->handle(FL_PUSH);

			//E_DEBUG(E_STRLOC ": FL_PUSH from desktop\n");
			selection_x = Fl::event_x_root();
			selection_y = Fl::event_y_root();
	
			return 1;
		 }

		case FL_DRAG:
			moving = true;
			if(!selectionbuf.empty()) {
				//E_DEBUG(E_STRLOC ": DRAG icon from desktop\n");
				move_selection(Fl::event_x_root(), Fl::event_y_root(), false);
			} else {
				//E_DEBUG(E_STRLOC ": DRAG from desktop\n");
				/*
				 * Moving is started with pushed button.
				 * From this point selection box is created and is rolled until release
				 */
				if(selbox->x != 0 || selbox->y != 0) {
					selbox->w = Fl::event_x() - selbox->x;
					selbox->h = Fl::event_y() - selbox->y;

					selbox->show = true;

					/* see if there some icons inside selection area */
					select_in_area();

					/* redraw selection box */
					damage(EDE_DESKTOP_DAMAGE_OVERLAY);
				}
			}

			return 1;

		case FL_RELEASE:
			//E_DEBUG(E_STRLOC ": RELEASE from desktop\n");
			//E_DEBUG(E_STRLOC ": clicks: %i\n", Fl::event_is_click());

			if(selbox->show) {
				selbox->x = selbox->y = selbox->w = selbox->h = 0;
				selbox->show = false;
				damage(EDE_DESKTOP_DAMAGE_OVERLAY);

				/*
				 * Now pickup those who are in is_focused() state.
				 *
				 * Possible flickers due overlay will be later removed when is called move_selection(), which 
				 * will in turn redraw icons again after position them.
				 */
				if(!selectionbuf.empty())
					selectionbuf.clear();

				DesktopIcon *o;
				for(int i = 0; i < children(); i++) {
					if(NOT_SELECTABLE(child(i))) continue;

					o = (DesktopIcon*)child(i);
					if(o->is_focused())
						select(o, false);
				}

				return 1;
			}

			if(!selectionbuf.empty() && moving)
				move_selection(Fl::event_x_root(), Fl::event_y_root(), true);

			/* 
			 * Do not send FL_RELEASE during move
			 * TODO: should be alowed FL_RELEASE to multiple icons? (aka. run command for all selected icons)?
			 */
			if(selectionbuf.size() == 1 && !moving)
				selectionbuf.front()->handle(FL_RELEASE);

			moving = false;
			return 1;

		case FL_DND_ENTER:
		case FL_DND_DRAG:
		case FL_DND_LEAVE:
			return 1;

		case FL_DND_RELEASE: {
			DesktopIcon* di = below_mouse(Fl::event_x(), Fl::event_y());
			if(di) return di->handle(event);
			return 1;
		}

		case FL_PASTE: {
			DesktopIcon* di = below_mouse(Fl::event_x(), Fl::event_y());
			if(di) return di->handle(event);
			return 1;
		}

		case FL_ENTER:
		case FL_LEAVE:
		case FL_MOVE:
			return EDE_DESKTOP_WINDOW::handle(event);

		default:
			break;
	}

	return 0;
}
예제 #19
0
int main()
{
	int ch;
	
	initscr();			/* start curses	*/
	raw();				/* disable line buffering */
	keypad(stdscr, TRUE);
	noecho();

	start_color();
	use_default_colors();
	init_pair(10, COLOR_WHITE, COLOR_RED);

	statuswin = subwin(stdscr, 1, 0, 0, 0);
	hdrwin = subwin(stdscr, 1, 0, 1, 0);

	blockpad = newpad(1000, 60);

	errorw = statuswin;

	wclear(stdscr);

	db_connect();
	if (db_is_connected())
	{
		reporterror("connected");
		rels = db_fetch_relations(&nrels);
		if (rels)
			display_relations(hdrwin, blockpad, rels, nrels);
	}

	move_selection(0);
	refresh();

	for (;;)
	{
		refresh_screen();

		ch = getch();

		werase(statuswin);
		wrefresh(statuswin);

		switch (ch)
		{
			case KEY_UP:
				if (displayed_block != InvalidBlockNumber)
					scroll_blockpad(-1);
				else
					move_selection(-1);
				break;
			case KEY_DOWN:
				if (displayed_block != InvalidBlockNumber)
					scroll_blockpad(1);
				else
					move_selection(1);
				break;
			case KEY_NPAGE:
				if (displayed_block != InvalidBlockNumber)
					scroll_blockpad(15);
				else
					move_selection(15);
				break;
			case KEY_PPAGE:
				if (displayed_block != InvalidBlockNumber)
					scroll_blockpad(-15);
				else
					move_selection(-15);
				break;

			case KEY_ENTER:
			case KEY_RIGHT:
				if (displayed_block == InvalidBlockNumber)
				{
					block = db_fetch_block(rels[selected_rel].relname, "main", 0);
					if (block)
					{
						blockpad_pos_save = blockpad_pos;
						blockpad_pos = 0;
						displayed_block = 0;
						display_block(hdrwin, blockpad, block, displayed_block);
					}
				}
				else
				{
					displayed_block++;
					block = db_fetch_block(rels[selected_rel].relname, "main", displayed_block);
					if (block)
					{
						blockpad_pos_save = blockpad_pos;
						blockpad_pos = 0;
						display_block(hdrwin, blockpad, block, displayed_block);
					}
				}
				break;

			case KEY_LEFT:
				if (displayed_block != InvalidBlockNumber)
				{
					displayed_block--;
					if (displayed_block == InvalidBlockNumber)
					{
						blockpad_pos = blockpad_pos_save;
						if (displayed_block == InvalidBlockNumber)
						{
							display_relations(hdrwin, blockpad, rels, nrels);
							mvwchgat(blockpad, selected_rel, 0, 40, A_REVERSE, 0, NULL);
						}
					}
					else
					{
						block = db_fetch_block(rels[selected_rel].relname, "main", displayed_block);
						if (block)
						{
							blockpad_pos_save = blockpad_pos;
							blockpad_pos = 0;
							display_block(hdrwin, blockpad, block, displayed_block);
						}
					}

				}
				break;

			case 'g':				/* goto block */
				if (displayed_block != InvalidBlockNumber)
				{
					char str[11];
					BlockNumber blkno;
					char *endptr;

					werase(hdrwin);
					mvwprintw(hdrwin, 0, 0, "Goto block: ");
					refresh_screen();
					echo();
					getnstr(str, sizeof(str) - 1);
					noecho();

					blkno = strtoul(str, &endptr, 10);
					if (*endptr != '\0')
					{
						werase(hdrwin);
						mvwprintw(hdrwin, 0, 0, "Invalid block number");
					}
					else
					{
						block = db_fetch_block(rels[selected_rel].relname, "main", blkno);
						if (block)
						{
							displayed_block = blkno;
							blockpad_pos_save = blockpad_pos;
							blockpad_pos = 0;
							display_block(hdrwin, blockpad, block, displayed_block);
						}
					}
				}
				break;

			case 'q':
				endwin();			/* End curses mode		  */
				exit(0);
				break;
			default:
				reporterror("unknown key: %c", ch);
		}
	}
	endwin();			/* End curses mode		  */

	return 0;
}
예제 #20
0
/**
 * e_selection_model_key_press
 * @selection: #ESelectionModel to affect.
 * @key: The event.
 *
 * This routine does whatever is appropriate as if the user pressed
 * the given key.
 *
 * Returns: %TRUE if the #ESelectionModel used the key.
 */
gint
e_selection_model_key_press      (ESelectionModel *selection,
				  GdkEventKey          *key)
{
	selection->old_selection = -1;

	switch (key->keyval) {
	case GDK_Up:
	case GDK_KP_Up:
		return move_selection(selection, TRUE, key->state);
	case GDK_Down:
	case GDK_KP_Down:
		return move_selection(selection, FALSE, key->state);
	case GDK_space:
	case GDK_KP_Space:
		if (selection->mode != GTK_SELECTION_SINGLE) {
			int row = e_selection_model_cursor_row(selection);
			int col = e_selection_model_cursor_col(selection);
			if (row == -1)
				break;

			e_selection_model_toggle_single_row (selection, row);
			g_signal_emit(selection,
				      e_selection_model_signals[CURSOR_ACTIVATED], 0,
				      row, col);
			return TRUE;
		}
		break;
	case GDK_Return:
	case GDK_KP_Enter:
		if (selection->mode != GTK_SELECTION_SINGLE) {
			int row = e_selection_model_cursor_row(selection);
			int col = e_selection_model_cursor_col(selection);
			e_selection_model_select_single_row (selection, row);
			g_signal_emit(selection,
				      e_selection_model_signals[CURSOR_ACTIVATED], 0,
				      row, col);
			return TRUE;
		}
		break;
	case GDK_Home:
	case GDK_KP_Home:
		if (selection->cursor_mode == E_CURSOR_LINE) {
			int row = 0;
			int cursor_col = e_selection_model_cursor_col(selection);

			row = e_sorter_sorted_to_model(selection->sorter, row);
			e_selection_model_select_as_key_press (selection, row, cursor_col, key->state);
			return TRUE;
		}
		break;
	case GDK_End:
	case GDK_KP_End:
		if (selection->cursor_mode == E_CURSOR_LINE) {
			int row = e_selection_model_row_count(selection) - 1;
			int cursor_col = e_selection_model_cursor_col(selection);

			row = e_sorter_sorted_to_model(selection->sorter, row);
			e_selection_model_select_as_key_press (selection, row, cursor_col, key->state);
			return TRUE;
		}
		break;
	}
	return FALSE;
}