C++ (Cpp) mperror_bootloader_check_reset_cause 예제들

예제 #1

파일: main.c 프로젝트: Ga-vin/micropython

//*****************************************************************************
//! Board Initialization & Configuration
//*****************************************************************************
static void bootmgr_board_init(void) {
    // set the vector table base
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    // enable processor interrupts
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    // mandatory MCU initialization
    PRCMCC3200MCUInit();

    mperror_bootloader_check_reset_cause();

#if MICROPY_HW_ANTENNA_DIVERSITY
    // configure the antenna selection pins
    antenna_init0();
#endif

    // enable the data hashing engine
    CRYPTOHASH_Init();

    // init the system led and the system switch
    mperror_init0();

    // clear the safe boot flag, since we can't trust its content after reset
    PRCMClearSafeBootRequest();
}

예제 #2

파일: main.c 프로젝트: 19emtuck/micropython

//*****************************************************************************
//! Board Initialization & Configuration
//*****************************************************************************
static void bootmgr_board_init(void) {
    // set the vector table base
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    // enable processor interrupts
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    // mandatory MCU initialization
    PRCMCC3200MCUInit();

    // clear all the special bits, since we can't trust their content after reset
    // except for the WDT reset one!!
    PRCMClearSpecialBit(PRCM_SAFE_BOOT_BIT);
    PRCMClearSpecialBit(PRCM_FIRST_BOOT_BIT);

    // check the reset after clearing the special bits
    mperror_bootloader_check_reset_cause();

#if MICROPY_HW_ANTENNA_DIVERSITY
    // configure the antenna selection pins
    antenna_init0();
#endif

    // enable the data hashing engine
    CRYPTOHASH_Init();

    // init the system led and the system switch
    mperror_init0();
}

예제 #3

파일: main.c 프로젝트: Dreamapple/micropython

//*****************************************************************************
//! Board Initialization & Configuration
//*****************************************************************************
static void bootmgr_board_init(void) {
    // Set vector table base
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    // Enable Processor Interrupts
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    // Mandatory MCU Initialization
    PRCMCC3200MCUInit();

    mperror_bootloader_check_reset_cause();

    // Enable the Data Hashing Engine
    HASH_Init();

    // Init the system led and the system switch
    mperror_init0();

    // clear the safe boot flag, since we can't trust its content after reset
    PRCMClearSafeBootRequest();
}