static void browserToCgiService(HttpQueue *q)
{
HttpConn *conn;
HttpPacket *packet;
Cgi *cgi;
MprCmd *cmd;
MprBuf *buf;
ssize rc, len;
int err;
if ((cgi = q->queueData) == 0) {
return;
}
assert(q == cgi->writeq);
cmd = cgi->cmd;
assert(cmd);
conn = cgi->conn;
for (packet = httpGetPacket(q); packet; packet = httpGetPacket(q)) {
if ((buf = packet->content) == 0) {
/* End packet */
continue;
}
len = mprGetBufLength(buf);
rc = mprWriteCmd(cmd, MPR_CMD_STDIN, mprGetBufStart(buf), len);
if (rc < 0) {
err = mprGetError();
if (err == EINTR) {
continue;
} else if (err == EAGAIN || err == EWOULDBLOCK) {
httpPutBackPacket(q, packet);
break;
}
mprLog(2, "CGI: write to gateway failed for %d bytes, rc %d, errno %d", len, rc, mprGetOsError());
mprCloseCmdFd(cmd, MPR_CMD_STDIN);
httpDiscardQueueData(q, 1);
httpError(conn, HTTP_CODE_BAD_GATEWAY, "Cannot write body data to CGI gateway");
break;
}
mprTrace(6, "CGI: browserToCgiService %d/%d, qmax %d", rc, len, q->max);
mprAdjustBufStart(buf, rc);
if (mprGetBufLength(buf) > 0) {
httpPutBackPacket(q, packet);
break;
}
}
if (q->count > 0) {
/* Wait for writable event so cgiCallback can recall this routine */
mprEnableCmdEvents(cmd, MPR_CMD_STDIN);
} else if (conn->rx->eof) {
mprCloseCmdFd(cmd, MPR_CMD_STDIN);
} else {
mprDisableCmdEvents(cmd, MPR_CMD_STDIN);
}
}
/*
* Default callback routine for the mprRunCmd routines. Uses may supply their own callback instead of this routine.
* The callback is run whenever there is I/O to read/write to the CGI gateway.
*/
static int cmdCallback(MprCmd *cmd, int channel, void *data)
{
MprBuf *buf;
int len, space;
/*
* Note: stdin, stdout and stderr are named from the client's perspective
*/
buf = 0;
switch (channel) {
case MPR_CMD_STDIN:
return 0;
case MPR_CMD_STDOUT:
buf = cmd->stdoutBuf;
break;
case MPR_CMD_STDERR:
buf = cmd->stderrBuf;
break;
}
/*
* Read and aggregate the result into a single string
*/
space = mprGetBufSpace(buf);
if (space < (MPR_BUFSIZE / 4)) {
if (mprGrowBuf(buf, MPR_BUFSIZE) < 0) {
mprCloseCmdFd(cmd, channel);
return 0;
}
space = mprGetBufSpace(buf);
}
len = mprReadCmdPipe(cmd, channel, mprGetBufEnd(buf), space);
if (len <= 0) {
if (len == 0 || (len < 0 && !(errno == EAGAIN || errno == EWOULDBLOCK))) {
if (channel == MPR_CMD_STDOUT && cmd->flags & MPR_CMD_ERR) {
/*
* Now that stdout is complete, enable stderr to receive an EOF or any error output.
* This is serialized to eliminate both stdin and stdout events on different threads at the same time.
* Do before closing as the stderr event may come on another thread and we want to ensure avoid locking.
*/
mprCloseCmdFd(cmd, channel);
} else {
mprCloseCmdFd(cmd, channel);
}
return 0;
}
} else {
mprAdjustBufEnd(buf, len);
}
return 0;
}
/*
Default callback routine for the mprRunCmd routines. Uses may supply their own callback instead of this routine.
The callback is run whenever there is I/O to read/write to the CGI gateway.
*/
static void defaultCmdCallback(MprCmd *cmd, int channel, void *data)
{
MprBuf *buf;
ssize len, space;
int errCode;
/*
Note: stdin, stdout and stderr are named from the client's perspective
*/
buf = 0;
switch (channel) {
case MPR_CMD_STDIN:
return;
case MPR_CMD_STDOUT:
buf = cmd->stdoutBuf;
break;
case MPR_CMD_STDERR:
buf = cmd->stderrBuf;
break;
default:
/* Child death notification */
return;
}
/*
Read and aggregate the result into a single string
*/
space = mprGetBufSpace(buf);
if (space < (ME_BUFSIZE / 4)) {
if (mprGrowBuf(buf, ME_BUFSIZE) < 0) {
mprCloseCmdFd(cmd, channel);
return;
}
space = mprGetBufSpace(buf);
}
len = mprReadCmd(cmd, channel, mprGetBufEnd(buf), space);
errCode = mprGetError();
if (len <= 0) {
if (len == 0 || (len < 0 && !(errCode == EAGAIN || errCode == EWOULDBLOCK))) {
mprCloseCmdFd(cmd, channel);
return;
}
} else {
mprAdjustBufEnd(buf, len);
}
mprAddNullToBuf(buf);
mprEnableCmdEvents(cmd, channel);
}
static void writeToCGI(MaQueue *q)
{
MaConn *conn;
MaPacket *packet;
MprCmd *cmd;
MprBuf *buf;
int len, rc, err;
cmd = (MprCmd*) q->pair->queueData;
mprAssert(cmd);
conn = q->conn;
for (packet = maGet(q); packet && !conn->requestFailed; packet = maGet(q)) {
buf = packet->content;
len = mprGetBufLength(buf);
mprAssert(len > 0);
rc = mprWriteCmdPipe(cmd, MPR_CMD_STDIN, mprGetBufStart(buf), len);
mprLog(q, 5, "CGI: write %d bytes to gateway. Rc rc %d, errno %d", len, rc, mprGetOsError());
if (rc < 0) {
err = mprGetError();
if (err == EINTR) {
continue;
} else if (err == EAGAIN || err == EWOULDBLOCK) {
break;
}
mprLog(q, 2, "CGI: write to gateway failed for %d bytes, rc %d, errno %d", len, rc, mprGetOsError());
mprCloseCmdFd(cmd, MPR_CMD_STDIN);
maFailRequest(conn, MPR_HTTP_CODE_BAD_GATEWAY, "Can't write body data to CGI gateway");
break;
} else {
mprLog(q, 5, "CGI: write to gateway %d bytes asked to write %d", rc, len);
mprAdjustBufStart(buf, rc);
if (mprGetBufLength(buf) > 0) {
maPutBack(q, packet);
} else {
maFreePacket(q, packet);
}
}
}
}
/*
This routine runs after all incoming data has been received
*/
static void runCgi(MaQueue *q)
{
MaResponse *resp;
MaConn *conn;
MprCmd *cmd;
conn = q->conn;
resp = conn->response;
cmd = (MprCmd*) q->queueData;
if (cmd == 0) {
startCgi(q);
cmd = (MprCmd*) q->queueData;
if (q->pair->count > 0) {
writeToCGI(q->pair);
}
}
/*
Close the CGI program's stdin. This will allow it to exit if it was expecting input data.
*/
mprCloseCmdFd(cmd, MPR_CMD_STDIN);
if (conn->requestFailed) {
maPutForService(q, maCreateEndPacket(q), 1);
return;
}
while (mprWaitForCmd(cmd, 1000) < 0) {
if (mprGetElapsedTime(cmd, cmd->lastActivity) >= conn->host->timeout) {
break;
}
}
if (cmd->pid == 0) {
maPutForService(q, maCreateEndPacket(q), 1);
} else {
mprStopCmd(cmd);
mprReapCmd(cmd, MPR_TIMEOUT_STOP_TASK);
cmd->status = 255;
}
}
PUBLIC void mprFinalizeCmd(MprCmd *cmd)
{
assert(cmd);
mprCloseCmdFd(cmd, MPR_CMD_STDIN);
}
static void readFromCgi(Cgi *cgi, int channel)
{
HttpConn *conn;
HttpPacket *packet;
HttpTx *tx;
HttpQueue *q, *writeq;
MprCmd *cmd;
ssize nbytes;
int err;
cmd = cgi->cmd;
conn = cgi->conn;
tx = conn->tx;
q = cgi->readq;
writeq = conn->writeq;
assert(conn->sock);
assert(conn->state > HTTP_STATE_BEGIN);
if (tx->finalized) {
mprCloseCmdFd(cmd, channel);
}
while (mprGetCmdFd(cmd, channel) >= 0 && !tx->finalized && writeq->count < writeq->max) {
if ((packet = cgi->headers) != 0) {
if (mprGetBufSpace(packet->content) < ME_MAX_BUFFER && mprGrowBuf(packet->content, ME_MAX_BUFFER) < 0) {
break;
}
} else if ((packet = httpCreateDataPacket(ME_MAX_BUFFER)) == 0) {
break;
}
nbytes = mprReadCmd(cmd, channel, mprGetBufEnd(packet->content), ME_MAX_BUFFER);
if (nbytes < 0) {
err = mprGetError();
if (err == EINTR) {
continue;
} else if (err == EAGAIN || err == EWOULDBLOCK) {
break;
}
mprCloseCmdFd(cmd, channel);
break;
} else if (nbytes == 0) {
mprCloseCmdFd(cmd, channel);
break;
} else {
traceData(cmd, mprGetBufEnd(packet->content), nbytes);
mprAdjustBufEnd(packet->content, nbytes);
}
if (channel == MPR_CMD_STDERR) {
mprLog("error cgi", 0, "CGI failed uri=\"%s\", details: %s", conn->rx->uri, mprGetBufStart(packet->content));
httpSetStatus(conn, HTTP_CODE_SERVICE_UNAVAILABLE);
cgi->seenHeader = 1;
}
if (!cgi->seenHeader) {
if (!parseCgiHeaders(cgi, packet)) {
cgi->headers = packet;
return;
}
cgi->headers = 0;
cgi->seenHeader = 1;
}
if (!tx->finalizedOutput && httpGetPacketLength(packet) > 0) {
/* Put the data to the CGI readq, then cgiToBrowserService will take care of it */
httpPutPacket(q, packet);
}
}
}
static void cgiEvent(MaQueue *q, MprCmd *cmd, int channel)
{
MaConn *conn;
MaResponse *resp;
MprBuf *buf;
int space, nbytes, err;
mprLog(cmd, 6, "CGI callback channel %d", channel);
buf = 0;
conn = q->conn;
resp = conn->response;
mprAssert(resp);
cmd->lastActivity = mprGetTime(cmd);
switch (channel) {
case MPR_CMD_STDIN:
writeToCGI(q->pair);
return;
case MPR_CMD_STDOUT:
buf = cmd->stdoutBuf;
break;
case MPR_CMD_STDERR:
buf = cmd->stderrBuf;
break;
}
mprAssert(buf);
mprResetBufIfEmpty(buf);
/*
Come here for CGI stdout, stderr events. ie. reading data from the CGI program.
*/
while (mprGetCmdFd(cmd, channel) >= 0) {
/*
Read as much data from the CGI as possible
*/
do {
if ((space = mprGetBufSpace(buf)) == 0) {
mprGrowBuf(buf, MA_BUFSIZE);
if ((space = mprGetBufSpace(buf)) == 0) {
break;
}
}
nbytes = mprReadCmdPipe(cmd, channel, mprGetBufEnd(buf), space);
mprLog(q, 5, "CGI: read from gateway %d on channel %d. errno %d", nbytes, channel,
nbytes >= 0 ? 0 : mprGetOsError());
if (nbytes < 0) {
err = mprGetError();
if (err == EINTR) {
continue;
} else if (err == EAGAIN || err == EWOULDBLOCK) {
break;
}
mprLog(cmd, 5, "CGI read error %d for %", mprGetError(), (channel == MPR_CMD_STDOUT) ? "stdout" : "stderr");
mprCloseCmdFd(cmd, channel);
} else if (nbytes == 0) {
/*
This may reap the terminated child and thus clear cmd->process if both stderr and stdout are closed.
*/
mprLog(cmd, 5, "CGI EOF for %s", (channel == MPR_CMD_STDOUT) ? "stdout" : "stderr");
mprCloseCmdFd(cmd, channel);
break;
} else {
mprLog(cmd, 5, "CGI read %d bytes from %s", nbytes, (channel == MPR_CMD_STDOUT) ? "stdout" : "stderr");
mprAdjustBufEnd(buf, nbytes);
traceData(cmd, mprGetBufStart(buf), nbytes);
}
} while ((space = mprGetBufSpace(buf)) > 0);
if (mprGetBufLength(buf) == 0) {
return;
}
if (channel == MPR_CMD_STDERR) {
/*
If we have an error message, send that to the client
*/
if (mprGetBufLength(buf) > 0) {
mprAddNullToBuf(buf);
mprLog(conn, 4, mprGetBufStart(buf));
if (writeToClient(q, cmd, buf, channel) < 0) {
return;
}
maSetResponseCode(conn, MPR_HTTP_CODE_SERVICE_UNAVAILABLE);
cmd->userFlags |= MA_CGI_SEEN_HEADER;
cmd->status = 0;
}
} else {
if (!(cmd->userFlags & MA_CGI_SEEN_HEADER) && !parseHeader(conn, cmd)) {
return;
}
if (cmd->userFlags & MA_CGI_SEEN_HEADER) {
if (writeToClient(q, cmd, buf, channel) < 0) {
return;
}
}
}
}
}
static void readFromCgi(Cgi *cgi, int channel)
{
HttpConn *conn;
HttpPacket *packet;
HttpTx *tx;
HttpQueue *q, *writeq;
MprCmd *cmd;
ssize nbytes;
int err;
cmd = cgi->cmd;
conn = cgi->conn;
tx = conn->tx;
q = cgi->readq;
writeq = conn->writeq;
assert(conn->sock);
assert(conn->state > HTTP_STATE_BEGIN);
if (tx->finalized) {
mprCloseCmdFd(cmd, channel);
}
while (mprGetCmdFd(cmd, channel) >= 0 && !tx->finalized && writeq->count < writeq->max) {
if ((packet = cgi->headers) != 0) {
if (mprGetBufSpace(packet->content) < ME_MAX_BUFFER && mprGrowBuf(packet->content, ME_MAX_BUFFER) < 0) {
break;
}
} else if ((packet = httpCreateDataPacket(ME_MAX_BUFFER)) == 0) {
break;
}
nbytes = mprReadCmd(cmd, channel, mprGetBufEnd(packet->content), ME_MAX_BUFFER);
if (nbytes < 0) {
err = mprGetError();
if (err == EINTR) {
continue;
} else if (err == EAGAIN || err == EWOULDBLOCK) {
break;
}
mprTrace(6, "CGI: Gateway read error %d for %s", err, (channel == MPR_CMD_STDOUT) ? "stdout" : "stderr");
mprCloseCmdFd(cmd, channel);
break;
} else if (nbytes == 0) {
mprTrace(6, "CGI: Gateway EOF for %s, pid %d", (channel == MPR_CMD_STDOUT) ? "stdout" : "stderr", cmd->pid);
mprCloseCmdFd(cmd, channel);
break;
} else {
mprTrace(6, "CGI: Gateway read %d bytes from %s", nbytes, (channel == MPR_CMD_STDOUT) ? "stdout" : "stderr");
traceData(cmd, mprGetBufEnd(packet->content), nbytes);
mprAdjustBufEnd(packet->content, nbytes);
}
if (channel == MPR_CMD_STDERR) {
// FUTURE - should be an option to keep going despite stderr output
mprError("CGI: Error for \"%s\"\n\n%s", conn->rx->uri, mprGetBufStart(packet->content));
httpSetStatus(conn, HTTP_CODE_SERVICE_UNAVAILABLE);
cgi->seenHeader = 1;
}
if (!cgi->seenHeader) {
if (!parseCgiHeaders(cgi, packet)) {
cgi->headers = packet;
return;
}
cgi->headers = 0;
cgi->seenHeader = 1;
}
if (!tx->finalizedOutput && httpGetPacketLength(packet) > 0) {
/* Put the data to the CGI readq, then cgiToBrowserService will take care of it */
httpPutPacket(q, packet);
}
}
}
/*
* This routine runs a command and waits for its completion. Stdoutput and Stderr are returned in *out and *err
* respectively. The command returns the exit status of the command.
* Valid flags are:
* MPR_CMD_NEW_SESSION Create a new session on Unix
* MPR_CMD_SHOW Show the commands window on Windows
* MPR_CMD_IN Connect to stdin
*/
int mprRunCmdV(MprCmd *cmd, int argc, char **argv, char **out, char **err, int flags)
{
int rc, status;
if (err) {
*err = 0;
flags |= MPR_CMD_ERR;
} else {
flags &= ~MPR_CMD_ERR;
}
if (out) {
*out = 0;
flags |= MPR_CMD_OUT;
} else {
flags &= ~MPR_CMD_OUT;
}
if (flags & MPR_CMD_OUT) {
mprFree(cmd->stdoutBuf);
cmd->stdoutBuf = mprCreateBuf(cmd, MPR_BUFSIZE, -1);
}
if (flags & MPR_CMD_ERR) {
mprFree(cmd->stderrBuf);
cmd->stderrBuf = mprCreateBuf(cmd, MPR_BUFSIZE, -1);
}
mprSetCmdCallback(cmd, cmdCallback, NULL);
lock(cmd);
rc = mprStartCmd(cmd, argc, argv, NULL, flags);
/*
* Close the pipe connected to the client's stdin
*/
if (cmd->files[MPR_CMD_STDIN].fd >= 0) {
mprCloseCmdFd(cmd, MPR_CMD_STDIN);
}
if (rc < 0) {
if (err) {
if (rc == MPR_ERR_CANT_ACCESS) {
*err = mprAsprintf(cmd, -1, "Can't access command %s", cmd->program);
} else if (MPR_ERR_CANT_OPEN) {
*err = mprAsprintf(cmd, -1, "Can't open standard I/O for command %s", cmd->program);
} else if (rc == MPR_ERR_CANT_CREATE) {
*err = mprAsprintf(cmd, -1, "Can't create process for %s", cmd->program);
}
}
unlock(cmd);
return rc;
}
if (cmd->flags & MPR_CMD_DETACH) {
unlock(cmd);
return 0;
}
unlock(cmd);
if (mprWaitForCmd(cmd, -1) < 0) {
return MPR_ERR_NOT_READY;
}
lock(cmd);
if (mprGetCmdExitStatus(cmd, &status) < 0) {
unlock(cmd);
return MPR_ERR;
}
if (err && flags & MPR_CMD_ERR) {
mprAddNullToBuf(cmd->stderrBuf);
*err = mprGetBufStart(cmd->stderrBuf);
}
if (out && flags & MPR_CMD_OUT) {
mprAddNullToBuf(cmd->stdoutBuf);
*out = mprGetBufStart(cmd->stdoutBuf);
}
unlock(cmd);
return status;
}