C++ (Cpp) msm7x2x_misc_init 예제들

예제 #1

0

파일 보기

파일: board-msm7x27a_u0.c 프로젝트: broneksce/lge_MonsterKernel-KK

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();
	msm_adsp_add_pdev();
	if (cpu_is_msm8625())
		msm8625_device_i2c_init();
	else
		msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();

	msm7x27a_otg_gadget();
/* LGE_CHANGE_: 2012/11/2 [email protected] U0 Flash Porting */
#ifndef CONFIG_MACH_LGE
	msm7x27a_cfg_smsc911x();
#endif
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */

	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
	msm7627a_init_mmc();
	msm_fb_add_devices();
	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
	register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
	lge_add_sound_devices();
#endif
/* LGE_CHANGE_S: 2012/11/2 [email protected] U0 Flash Porting */
	msm7627a_camera_init();
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */
	msm7627a_add_io_devices();
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
	/*8x25 kgsl initializations*/
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
/* 2012-10-25 [email protected] Boot Mode Check [END] */
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
	lge_add_pm_devices();
}

예제 #2

0

파일 보기

파일: board-msm7x27a.c 프로젝트: arjen75/icecold-kernel

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();
	msm_adsp_add_pdev();
	if (cpu_is_msm8625())
		msm8625_device_i2c_init();
	else
		msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();

	msm7x27a_otg_gadget();
	msm7x27a_cfg_smsc911x();

	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
	msm7627a_init_mmc();
	msm_fb_add_devices();
	msm7x2x_init_host();
	msm7x27a_pm_init();
	register_i2c_devices();
	msm7627a_bt_power_init();
	msm7627a_camera_init();
	msm7627a_add_io_devices();
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
	/*8x25 kgsl initializations*/
	msm8x25_kgsl_3d0_init();
}

예제 #3

0

파일 보기

파일: board-msm7x27a_v1.c 프로젝트: paaaz/SKernel

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();
/* [LGE_BSP_S] [email protected], 20130212 - RT8966A miniABB regulator */
#ifdef CONFIG_MINIABB_REGULATOR
	init_miniabb_regulators();
#endif /* CONFIG_MINIABB_REGULATOR */
/* [LGE_BSP_E] [email protected], 20130212 - RT8966A miniABB regulator */
	msm_adsp_add_pdev();
	msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();

	msm7x27a_otg_gadget();

	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
	msm7627a_init_mmc();
	msm_fb_add_devices();
	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO //ew0804.kim
	lge_add_sound_devices();
#endif
	msm7627a_camera_init();
	msm7627a_add_io_devices();
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
	/*8x25 kgsl initializations*/
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif 

// LGE_CHANGE_S, [email protected],Add pm device	
	lge_add_pm_devices();
// LGE_CHANGE_E, [email protected],Add pm device	
}

예제 #4

0

파일 보기

파일: board-msm7x27a.c 프로젝트: arjen75/icecold-kernel

static void __init msm8625_rumi3_init(void)
{
	msm7x2x_misc_init();
	msm_adsp_add_pdev();
	msm8625_device_i2c_init();
	platform_add_devices(msm8625_rumi3_devices,
			ARRAY_SIZE(msm8625_rumi3_devices));

	msm_pm_set_platform_data(msm8625_pm_data,
			 ARRAY_SIZE(msm8625_pm_data));
	BUG_ON(msm_pm_boot_init(&msm_pm_8625_boot_pdata));
	msm8x25_spm_device_init();
}

예제 #5

0

파일 보기

파일: board-qrd7627a.c 프로젝트: weritos666/ARCHOS_50_Platinum

static void __init msm_qrd_init(void)
{
	msm7x2x_misc_init();
	msm7627a_init_regulators();
	msmqrd_adsp_add_pdev();

	if (cpu_is_msm8625() || cpu_is_msm8625q())
		msm8625_device_i2c_init();
	else
		msm7627a_device_i2c_init();

	/* uart1dm*/
	qrd7627a_uart1dm_config();
	/*OTG gadget*/
	qrd7627a_otg_gadget();

	msm_add_footswitch_devices();
	add_platform_devices();

	/* Ensure ar6000pm device is registered before MMC/SDC */
	
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm_qrd_init_ar6000pm();
#endif	
	msm7627a_init_mmc();

#ifdef CONFIG_USB_EHCI_MSM_72K
	msm7627a_init_host();
#endif
	msm_pm_init();

	msm_pm_register_irqs();
	msm_fb_add_devices();

	if (machine_is_msm8625q_evbd() || machine_is_msm8625q_skud()
				       || machine_is_msm8625q_skue())
		i2c_register_board_info(2, i2c2_info,
				ARRAY_SIZE(i2c2_info));

#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
	msm7627a_sensor_init();
	msm7627a_camera_init();
	qrd7627a_add_io_devices();
	msm7x25a_kgsl_3d0_init();
	msm8x25_kgsl_3d0_init();
}

예제 #6

0

파일 보기

파일: board-qrd7627a.c 프로젝트: lupohirp/Acer_Liquid_Glow_Kernel

static void __init msm_qrd1_init(void)
{
	msm7x2x_misc_init();
	msm7627a_init_regulators();
	msm_device_i2c_init();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

#ifdef CONFIG_USB_MSM_OTG_72K
	msm_otg_pdata.swfi_latency = msm7627a_pm_data
		[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
	msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
	msm_device_gadget_peripheral.dev.platform_data =
		&msm_gadget_pdata;
	platform_add_devices(qrd1_devices,
			ARRAY_SIZE(qrd1_devices));
	msm7627a_init_mmc();

#ifdef CONFIG_USB_EHCI_MSM_72K
	msm7627a_init_host();
#endif
	msm_pm_set_platform_data(msm7627a_pm_data,
				ARRAY_SIZE(msm7627a_pm_data));
	BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));

	msm_fb_add_devices();

#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif

	msm7627a_camera_init();

#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) || \
	defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C_MODULE)
	i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
				synaptic_i2c_clearpad3k,
				ARRAY_SIZE(synaptic_i2c_clearpad3k));
#endif
	platform_device_register(&hs_pdev);

#ifdef CONFIG_MSM_RPC_VIBRATOR
	msm_init_pmic_vibrator();
#endif
}

예제 #7

0

파일 보기

파일: board-msm7x27a_v1.c 프로젝트: RolanDroid/lge_MonsterKernel-lproj

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	msm7x27a_init_regulators();

#ifdef CONFIG_MINIABB_REGULATOR
	init_miniabb_regulators();
#endif
	msm_adsp_add_pdev();

	msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();
	msm7x27a_otg_gadget();
	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	msm7x27a_init_ar6000pm();

	msm7627a_init_mmc();

	msm_fb_add_devices();

	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
	lge_add_sound_devices();
#endif
	msm7627a_camera_init();
	msm7627a_add_io_devices();
	msm7x25a_kgsl_3d0_init();
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
	lge_add_pm_devices();
}

예제 #8

0

파일 보기

파일: board-qrd7627a.c 프로젝트: CryToCry96/Huawei-Y300_G510-CM10.1

static void __init msm_qrd_init(void)
{
	msm7x2x_misc_init();
	msm7627a_init_regulators();
	msmqrd_adsp_add_pdev();

	if (cpu_is_msm8625())
		msm8625_device_i2c_init();
	else
		msm7627a_device_i2c_init();

	/* uart1dm*/
	qrd7627a_uart1dm_config();
	/*OTG gadget*/
	qrd7627a_otg_gadget();

	msm_add_footswitch_devices();
	add_platform_devices();

	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm_qrd_init_ar6000pm();
	msm7627a_init_mmc();

#ifdef CONFIG_USB_EHCI_MSM_72K
	msm7627a_init_host();
#endif
	msm_pm_init();

	msm_pm_register_irqs();
	msm_fb_add_devices();

#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
    /* qcomm QRD phone concerned not need by hw product*/
	//msm7627a_bt_power_init();
#endif

	msm7627a_camera_init();
	qrd7627a_add_io_devices();
	msm7x25a_kgsl_3d0_init();
	msm8x25_kgsl_3d0_init();
}

예제 #9

0

파일 보기

파일: board-msm7x27a.c 프로젝트: HONO/CM10_Kernel

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();

	/* Common functions for SURF/FFA/RUMI3 */
	msm_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_cfg_uart2dm_serial();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

#ifdef CONFIG_USB_MSM_OTG_72K
	msm_otg_pdata.swfi_latency =
		msm7x27a_pm_data
		[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
	msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
	msm_device_gadget_peripheral.dev.platform_data =
		&msm_gadget_pdata;
	msm7x27a_cfg_smsc911x();
	platform_add_devices(msm_footswitch_devices,
			msm_num_footswitch_devices);
	platform_add_devices(surf_ffa_devices,
			ARRAY_SIZE(surf_ffa_devices));
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
#ifdef CONFIG_MMC_MSM
	msm7627a_init_mmc();
#endif
	msm_fb_add_devices();
#ifdef CONFIG_USB_EHCI_MSM_72K
	msm7x2x_init_host();
#endif

	msm_pm_set_platform_data(msm7x27a_pm_data,
				ARRAY_SIZE(msm7x27a_pm_data));
	BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));

#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
	register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
	if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) {
		atmel_ts_pdata.min_x = 0;
		atmel_ts_pdata.max_x = 480;
		atmel_ts_pdata.min_y = 0;
		atmel_ts_pdata.max_y = 320;
	}

	i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
		atmel_ts_i2c_info,
		ARRAY_SIZE(atmel_ts_i2c_info));

#if defined(CONFIG_MSM_CAMERA)
	msm7627a_camera_init();
#endif
	platform_device_register(&kp_pdev);
	platform_device_register(&hs_pdev);

	/* configure it as a pdm function*/
	if (gpio_tlmm_config(GPIO_CFG(LED_GPIO_PDM, 3,
				GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
				GPIO_CFG_8MA), GPIO_CFG_ENABLE))
		pr_err("%s: gpio_tlmm_config for %d failed\n",
			__func__, LED_GPIO_PDM);
	else
		platform_device_register(&led_pdev);

#ifdef CONFIG_MSM_RPC_VIBRATOR
	if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
		msm_init_pmic_vibrator();
#endif
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
}

예제 #10

0

파일 보기

파일: board-qrd7627a.c 프로젝트: akw28888/msm

static void __init msm_qrd_init(void)
{
	msm7x2x_misc_init();
	msm7627a_init_regulators();
	msmqrd_adsp_add_pdev();

	if (cpu_is_msm8625() || cpu_is_msm8625q())
		msm8625_device_i2c_init();
	else
		msm7627a_device_i2c_init();

	/* uart1dm*/
	qrd7627a_uart1dm_config();
	/*OTG gadget*/
	qrd7627a_otg_gadget();

	msm_add_footswitch_devices();
	add_platform_devices();

	/* Ensure ar6000pm device is registered before MMC/SDC */
/* modified by fanjiankang begin*/	
	//msm_qrd_init_ar6000pm();

	wlan_init_power();
    msm_read_nv(NV_ITEM_WLAN_MAC_ADDR, wlan_mac_addr);
	
	msm7627a_init_mmc();

#ifdef CONFIG_USB_EHCI_MSM_72K
	msm7627a_init_host();
#endif
	msm_pm_init();

	msm_pm_register_irqs();
	msm_fb_add_devices();

// zhangji modify for del mp8845c
// platform_device_register(&mp8845c_platform_device);
platform_device_register(&ncp6335d_platform_device);
#ifdef CONFIG_I2C_GPIO
	//if (machine_is_msm8625q_evbd() || machine_is_msm8625q_skud()
	//			       || machine_is_msm8625q_skue())
	//	i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
#endif


#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
	//msm7627a_sensor_init();
	msm7627a_camera_init();
	qrd7627a_add_io_devices();
	msm7x25a_kgsl_3d0_init();
	msm8x25_kgsl_3d0_init();
        msm7x27a_sensor_init();
	
	#ifdef CONFIG_PN544_NFC
	nfc_init();
	#endif
	
}

예제 #11

0

파일 보기

파일: board-msm7x27a.c 프로젝트: CryToCry96/Huawei-Y300_G510-CM10.1

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();
	msm_adsp_add_pdev();
	if (cpu_is_msm8625())
		msm8625_device_i2c_init();
	else
		msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();

#ifdef CONFIG_HUAWEI_KERNEL
    import_kernel_cmdline();
#endif

	msm7x27a_otg_gadget();
#ifndef CONFIG_HUAWEI_CAMERA
    msm7x27a_cfg_smsc911x();
#endif
#if (defined(CONFIG_HUAWEI_BT_BCM43XX) && defined(CONFIG_HUAWEI_KERNEL))
    /*before bt probe, config the bt_wake_msm gpio*/
    bt_wake_msm_config();
#endif
	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
	msm7627a_init_mmc();
	msm_fb_add_devices();
	msm7x2x_init_host();
	msm7x27a_pm_init();
	register_i2c_devices();
//#if (defined(HUAWEI_BT_BLUEZ_VER30) || (!defined(CONFIG_HUAWEI_KERNEL)))
	//msm7627a_bt_power_init() will check QC or BCM bt chip powers inner.
	msm7627a_bt_power_init();
//#endif
	msm7627a_camera_init();
	msm7627a_add_io_devices();
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
	
#ifdef CONFIG_HUAWEI_FEATURE_OEMINFO
    rmt_oeminfo_add_device();
#endif

#ifdef CONFIG_HUAWEI_KERNEL
	virtualkeys_init();
#endif

#ifdef CONFIG_HUAWEI_KERNEL
    hw_extern_sdcard_add_device();
#endif
    
	/*8x25 kgsl initializations*/
	msm8x25_kgsl_3d0_init();

	
#ifdef CONFIG_HUAWEI_MTK6252_MODEM
	{
		unsigned smem_size;
		boot_reason = *(unsigned int *)
			(smem_get_entry(SMEM_POWER_ON_STATUS_INFO, &smem_size));
		printk(KERN_NOTICE "Boot Reason = 0x%02x\n", boot_reason);
		mtk6252_dev_init();
	}
#endif
}