static void __init msm_cpr_init(void)
{
struct cpr_info_type *cpr_info = NULL;
uint8_t ring_osc = 0;
cpr_info = kzalloc(sizeof(struct cpr_info_type), GFP_KERNEL);
if (!cpr_info) {
pr_err("%s: Out of memory %d\n", __func__, -ENOMEM);
return;
}
msm_smem_get_cpr_info(cpr_info);
/**
* Set the ring_osc based on efuse BIT(0)
* CPR_fuse[0] = 0 selects 2nd RO (010)
* CPR_fuse[0] = 1 select 3rd RO (011)
*/
if (cpr_info->ring_osc == 0x0)
ring_osc = 0x2;
else if (cpr_info->ring_osc == 0x1)
ring_osc = 0x3;
msm_cpr_mode_data[TURBO_MODE].ring_osc = ring_osc;
msm_cpr_mode_data[NORMAL_MODE].ring_osc = ring_osc;
/* GCNT = 1000 nsec/52nsec (@TCX0=19.2Mhz) = 19.2 */
msm_cpr_mode_data[TURBO_MODE].ring_osc_data[ring_osc].gcnt = 19;
msm_cpr_mode_data[NORMAL_MODE].ring_osc_data[ring_osc].gcnt = 19;
/**
* The scaling factor and offset are as per chip characterization data
* This formula is used since available fuse bits in the chip are not
* enough to represent the value of maximum quot
*/
msm_cpr_pdata.max_quot = cpr_info->turbo_quot * 10 + 600;
/**
* Bits 4:0 of pvs_fuse provide mapping to the safe boot up voltage.
* Boot up mode is by default Turbo.
*/
msm_cpr_mode_data[TURBO_MODE].calibrated_uV =
msm_c2_pmic_mv[cpr_info->pvs_fuse & 0x1F];
pr_debug("%s: cpr: ring_osc: 0x%x\n", __func__,
msm_cpr_mode_data[TURBO_MODE].ring_osc);
pr_debug("%s: cpr: turbo_quot: 0x%x\n", __func__, cpr_info->turbo_quot);
pr_debug("%s: cpr: pvs_fuse: 0x%x\n", __func__, cpr_info->pvs_fuse);
kfree(cpr_info);
if (msm8625_cpu_id() == MSM8625A)
msm_cpr_pdata.max_freq = 1209600;
else if (msm8625_cpu_id() == MSM8625)
msm_cpr_pdata.max_freq = 1008000;
msm_cpr_clk_enable();
platform_device_register(&msm8625_vp_device);
platform_device_register(&msm8625_device_cpr);
}
static void __init msm_cpr_init(void)
{
struct cpr_info_type *cpr_info = NULL;
uint8_t ring_osc = 0;
cpr_info = kzalloc(sizeof(struct cpr_info_type), GFP_KERNEL);
if (!cpr_info) {
pr_err("%s: Out of memory %d\n", __func__, -ENOMEM);
return;
}
msm_smem_get_cpr_info(cpr_info);
msm_cpr_pdata.disable_cpr = cpr_info->disable_cpr;
/**
* Set the ring_osc based on efuse BIT(0)
* CPR_fuse[0] = 0 selects 2nd RO (010)
* CPR_fuse[0] = 1 select 3rd RO (011)
*/
if (cpr_info->ring_osc == 0x0)
ring_osc = 0x2;
else if (cpr_info->ring_osc == 0x1)
ring_osc = 0x3;
msm_cpr_mode_data[TURBO_MODE].ring_osc = ring_osc;
msm_cpr_mode_data[NORMAL_MODE].ring_osc = ring_osc;
/* GCNT = 1000 nsec/52nsec (@TCX0=19.2Mhz) = 19.2 */
msm_cpr_mode_data[TURBO_MODE].ring_osc_data[ring_osc].gcnt = 19;
msm_cpr_mode_data[NORMAL_MODE].ring_osc_data[ring_osc].gcnt = 19;
/**
* The scaling factor and offset are as per chip characterization data
* This formula is used since available fuse bits in the chip are not
* enough to represent the value of maximum quot
*/
msm_cpr_pdata.max_quot = cpr_info->turbo_quot * 10 + 600;
/**
* Fused Quot value for 1.2GHz on a 1.2GHz part is lower than
* the quot value calculated using the scaling factor formula for
* 1.2GHz when running on a 1.4GHz part. So, prop up the Quot for
* a 1.2GHz part by a chip characterization recommended value.
* Ditto for a 1.0GHz part.
*/
if (msm8625_cpu_id() == MSM8625A) {
msm_cpr_pdata.max_quot += 30;
if (msm_cpr_pdata.max_quot > 1400)
msm_cpr_pdata.max_quot = 1400;
} else if (msm8625_cpu_id() == MSM8625) {
msm_cpr_pdata.max_quot += 50;
if (msm_cpr_pdata.max_quot > 1350)
msm_cpr_pdata.max_quot = 1350;
}
/**
* Bits 4:0 of pvs_fuse provide mapping to the safe boot up voltage.
* Boot up mode is by default Turbo.
*/
msm_cpr_mode_data[TURBO_MODE].calibrated_uV =
msm_c2_pmic_mv[cpr_info->pvs_fuse & 0x1F];
if ((cpr_info->floor_fuse & 0x3) == 0x0) {
msm_cpr_mode_data[TURBO_MODE].nom_Vmin = 1000000;
msm_cpr_mode_data[TURBO_MODE].turbo_Vmin = 1100000;
} else if ((cpr_info->floor_fuse & 0x3) == 0x1) {
msm_cpr_mode_data[TURBO_MODE].nom_Vmin = 1050000;
msm_cpr_mode_data[TURBO_MODE].turbo_Vmin = 1100000;
} else if ((cpr_info->floor_fuse & 0x3) == 0x2) {
msm_cpr_mode_data[TURBO_MODE].nom_Vmin = 1100000;
msm_cpr_mode_data[TURBO_MODE].turbo_Vmin = 1100000;
}
pr_info("%s: cpr: ring_osc: 0x%x\n", __func__,
msm_cpr_mode_data[TURBO_MODE].ring_osc);
pr_info("%s: cpr: turbo_quot: 0x%x\n", __func__, cpr_info->turbo_quot);
pr_info("%s: cpr: pvs_fuse: 0x%x\n", __func__, cpr_info->pvs_fuse);
pr_info("%s: cpr: floor_fuse: 0x%x\n", __func__, cpr_info->floor_fuse);
pr_info("%s: cpr: nom_Vmin: %d, turbo_Vmin: %d\n", __func__,
msm_cpr_mode_data[TURBO_MODE].nom_Vmin,
msm_cpr_mode_data[TURBO_MODE].turbo_Vmin);
pr_info("%s: cpr: nom_Vmax: %d, turbo_Vmax: %d\n", __func__,
msm_cpr_mode_data[TURBO_MODE].nom_Vmax,
msm_cpr_mode_data[TURBO_MODE].turbo_Vmax);
kfree(cpr_info);
if (msm8625_cpu_id() == MSM8625A)
msm_cpr_pdata.max_freq = 1209600;
else if (msm8625_cpu_id() == MSM8625)
msm_cpr_pdata.max_freq = 1008000;
msm_cpr_clk_enable();
platform_device_register(&msm8625_vp_device);
platform_device_register(&msm8625_device_cpr);
}
static void __init msm_cpr_init(void)
{
struct cpr_info_type *cpr_info = NULL;
uint8_t ring_osc = 0;
uint32_t reg_val;
cpr_info = kzalloc(sizeof(struct cpr_info_type), GFP_KERNEL);
if (!cpr_info) {
pr_err("%s: Out of memory %d\n", __func__, -ENOMEM);
return;
}
msm_smem_get_cpr_info(cpr_info);
/**
* Set the ring_osc based on efuse BIT(0)
* CPR_fuse[0] = 0 selects 2nd RO (010)
* CPR_fuse[0] = 1 select 3rd RO (011)
*/
if (cpr_info->ring_osc == 0x0)
ring_osc = 0x2;
else if (cpr_info->ring_osc == 0x1)
ring_osc = 0x3;
msm_cpr_mode_data[TURBO_MODE].ring_osc = ring_osc;
msm_cpr_mode_data[NORMAL_MODE].ring_osc = ring_osc;
/* GCNT = 1000 nsec/52nsec (@TCX0=19.2Mhz) = 19.2 */
msm_cpr_mode_data[TURBO_MODE].ring_osc_data[ring_osc].gcnt = 19;
msm_cpr_mode_data[NORMAL_MODE].ring_osc_data[ring_osc].gcnt = 19;
/* The multiplier and offset are as per PTE data */
msm_cpr_mode_data[TURBO_MODE].ring_osc_data[ring_osc].target_count =
cpr_info->turbo_quot * 10 + 440;
msm_cpr_mode_data[NORMAL_MODE].ring_osc_data[ring_osc].target_count =
cpr_info->turbo_quot / msm_cpr_pdata.tgt_count_div_N;
/**
* Bits 4:0 of pvs_fuse provide mapping to the safe boot up voltage.
* Boot up mode is by default Turbo.
*/
msm_cpr_mode_data[TURBO_MODE].calibrated_mV =
msm_c2_pmic_mv[cpr_info->pvs_fuse & 0x1F];
/* TODO: Store the tgt_volt_offset values for the modes from PTE */
pr_debug("%s: cpr: ring_osc: 0x%x\n", __func__,
msm_cpr_mode_data[TURBO_MODE].ring_osc);
pr_debug("%s: cpr: turbo_quot: 0x%x\n", __func__, cpr_info->turbo_quot);
pr_debug("%s: cpr: pvs_fuse: 0x%x\n", __func__, cpr_info->pvs_fuse);
kfree(cpr_info);
/* Select TCXO (19.2MHz) as clock source */
reg_val = readl_relaxed(A11S_TEST_BUS_SEL_ADDR);
reg_val |= RBCPR_CLK_MUX_SEL;
writel_relaxed(reg_val, A11S_TEST_BUS_SEL_ADDR);
/* Get CPR out of reset */
writel_relaxed(0x1, RBCPR_SW_RESET_N);
platform_device_register(&msm8625_vp_device);
platform_device_register(&msm8625_device_cpr);
}
