void platform_init(void)
{
dprintf(INFO, "platform_init()\n");
#ifdef LK_PROFILING
unsigned int time_nand_emmc;
unsigned int time_load_logo;
unsigned int time_bat_init;
unsigned int time_backlight;
unsigned int time_show_logo;
unsigned int time_boot_mode;
unsigned int time_sw_env;
unsigned int time_platform_init;
time_platform_init = get_timer(0);
time_nand_emmc = get_timer(0);
#endif
#ifdef MTK_EMMC_SUPPORT
mmc_legacy_init(1);
#else
nand_init();
nand_driver_test();
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- NAND/EMMC init takes %d ms -------- \n", get_timer(time_nand_emmc));
time_load_logo = get_timer(0);
#endif
mboot_common_load_logo((unsigned long)mt_get_logo_db_addr(), "logo");
dprintf(INFO, "Show BLACK_PICTURE\n");
mt_disp_fill_rect(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT, 0x0);
mt_disp_power(TRUE);
//<2012/11/14-Yuting Shih-[BU2SC00137502]Add for LOGO display.
#if 1
mt_disp_show_boot_logo();
#else
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_power(1); //power on display related modules
#endif
//>2012/11/14-Yuting Shih-[BU2SC00137502].
#ifdef LK_PROFILING
printf("[PROFILE] ------- load_logo takes %d ms -------- \n", get_timer(time_load_logo));
time_backlight = get_timer(0);
#endif
mt65xx_backlight_on();
#ifdef LK_PROFILING
printf("[PROFILE] ------- backlight takes %d ms -------- \n", get_timer(time_backlight));
time_boot_mode = get_timer(0);
#endif
boot_mode_select();
#ifdef LK_PROFILING
printf("[PROFILE] ------- boot mode select takes %d ms -------- \n", get_timer(time_boot_mode));
#endif
/*Show download logo & message on screen */
if (g_boot_arg->boot_mode == DOWNLOAD_BOOT)
{
mt_disp_show_boot_logo();
video_printf(" => Downloading...\n");
mt65xx_backlight_on();
mtk_wdt_disable();//Disable wdt before jump to DA
platform_uninit();
#ifdef HAVE_CACHE_PL310
l2_disable();
#endif
arch_disable_cache(UCACHE);
arch_disable_mmu();
jump_da(g_boot_arg->da_info.addr, g_boot_arg->da_info.arg1, g_boot_arg->da_info.arg2);
}
#ifdef LK_PROFILING
time_bat_init = get_timer(0);
#endif
mt65xx_bat_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- battery init takes %d ms -------- \n", get_timer(time_bat_init));
#endif
/* NOTE: if define CFG_POWER_CHARGING, will rtc_boot_check() in mt65xx_bat_init() */
#ifndef CFG_POWER_CHARGING
rtc_boot_check(false);
#endif
#ifdef LK_PROFILING
time_show_logo = get_timer(0);
#endif
if ((g_boot_mode != ALARM_BOOT) && (g_boot_mode != FASTBOOT))
{
printf("show log disable\n");
mt_disp_show_boot_logo();
printf("show log end\n");
}
#ifdef LK_PROFILING
printf("[PROFILE] ------- show logo takes %d ms -------- \n", get_timer(time_show_logo));
time_sw_env= get_timer(0);
#endif
sw_env();
#ifdef LK_PROFILING
printf("[PROFILE] ------- sw_env takes %d ms -------- \n", get_timer(time_sw_env));
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- platform_init takes %d ms -------- \n", get_timer(time_platform_init));
#endif
}
void platform_init(void)
{
/* init timer */
//mtk_timer_init();
#ifdef LK_PROFILING
unsigned int time_nand_emmc;
unsigned int time_load_logo;
unsigned int time_bat_init;
unsigned int time_backlight;
unsigned int time_show_logo;
unsigned int time_boot_mode;
unsigned int time_sw_env;
unsigned int time_platform_init;
unsigned int time_env;
time_platform_init = get_timer(0);
time_nand_emmc = get_timer(0);
#endif
dprintf(INFO, "platform_init()\n");
#ifdef MTK_MT8193_SUPPORT
mt8193_init();
#endif
#ifdef MTK_EMMC_SUPPORT
mmc_legacy_init(1);
#else
nand_init();
nand_driver_test();
#endif
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
if((g_boot_arg->boot_reason == BR_USB) && (upmu_is_chr_det() == KAL_FALSE))
{
printf("[%s] Unplugged Charger/Usb between Pre-loader and Uboot in Kernel Charging Mode, Power Off \n", __func__);
mt6575_power_off();
}
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- NAND/EMMC init takes %d ms -------- \n", get_timer(time_nand_emmc));
time_env = get_timer(0);
#endif
env_init();
print_env();
#ifdef LK_PROFILING
printf("[PROFILE] ------- ENV init takes %d ms -------- \n", get_timer(time_env));
time_load_logo = get_timer(0);
#endif
mboot_common_load_logo((unsigned long)mt_get_logo_db_addr(), "logo");
#if ((!defined(MTK_NCP1851_SUPPORT)) && (!defined(MTK_BQ24196_SUPPORT)))
mt_disp_power(TRUE); //power on display related modules
#endif
dprintf(INFO, "Show BLACK_PICTURE\n");
mt_disp_fill_rect(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT, 0x0);
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
#ifdef LK_PROFILING
printf("[PROFILE] ------- load_logo takes %d ms -------- \n", get_timer(time_load_logo));
time_backlight = get_timer(0);
#endif
/*for kpd pmic mode setting*/
set_kpd_pmic_mode();
#if ((!defined(MTK_NCP1851_SUPPORT)) && (!defined(MTK_BQ24196_SUPPORT)))
//mt65xx_backlight_on();
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- backlight takes %d ms -------- \n", get_timer(time_backlight));
time_boot_mode = get_timer(0);
#endif
enable_PMIC_kpd_clock();
boot_mode_select();
#ifdef LK_PROFILING
printf("[PROFILE] ------- boot mode select takes %d ms -------- \n", get_timer(time_boot_mode));
#endif
/* initialize security library */
#ifdef MTK_EMMC_SUPPORT
sec_func_init(1);
#else
sec_func_init(0);
#endif
/*Show download logo & message on screen */
if (g_boot_arg->boot_mode == DOWNLOAD_BOOT)
{
printf("[LK] boot mode is DOWNLOAD_BOOT\n");
/* verify da before jumping to da*/
if (sec_usbdl_enabled()) {
u8 *da_addr = g_boot_arg->da_info.addr;
u32 da_sig_len = DRV_Reg32(SRAMROM_BASE + 0x54);
u32 da_len = da_sig_len >> 10;
u32 sig_len = da_sig_len & 0x3ff;
u8 *sig_addr = (unsigned char *)da_addr + (da_len - sig_len);
if (da_len == 0 || sig_len == 0) {
printf("[LK] da argument is invalid\n");
printf("da_addr = 0x%x\n", da_addr);
printf("da_len = 0x%x\n", da_len);
printf("sig_len = 0x%x\n", sig_len);
}
if (sec_usbdl_verify_da(da_addr, (da_len - sig_len), sig_addr, sig_len)) {
/* da verify fail */
video_printf(" => Not authenticated tool, download stop...\n");
DRV_WriteReg32(SRAMROM_BASE + 0x54, 0x0);
while(1); /* fix me, should not be infinite loop in lk */
}
}
else {
void platform_init(void)
{
#ifdef LK_PROFILING
unsigned int time_nand_emmc;
unsigned int time_load_logo;
unsigned int time_bat_init;
unsigned int time_backlight;
unsigned int time_show_logo;
unsigned int time_boot_mode;
unsigned int time_sw_env;
unsigned int time_platform_init;
unsigned int time_env;
unsigned int time_disp_init;
unsigned int time_security_init;
unsigned int time_RTC_boot_Check;
time_platform_init = get_timer(0);
time_nand_emmc = get_timer(0);
#endif
dprintf(INFO, "platform_init()\n");
#ifdef DUMMY_AP
dummy_ap_entry();
#endif
#ifdef MTK_EMMC_SUPPORT
mmc_legacy_init(1);
#else
#ifndef MACH_FPGA
nand_init();
nand_driver_test();
#endif
#endif
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
if((g_boot_arg->boot_reason == BR_USB) && (upmu_is_chr_det() == KAL_FALSE))
{
printf("[%s] Unplugged Charger/Usb between Pre-loader and Uboot in Kernel Charging Mode, Power Off \n", __func__);
mt6575_power_off();
}
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- NAND/EMMC init takes %d ms -------- \n", get_timer(time_nand_emmc));
time_env = get_timer(0);
#endif
env_init();
print_env();
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- ENV init takes %d ms -------- \n", (int)get_timer(time_env));
#endif
#ifdef LK_PROFILING
time_disp_init = get_timer(0);
#endif
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if(lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode ==CMD_MODE)
mt_disp_init((void *)g_fb_base);
#endif
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- disp init takes %d ms -------- \n", (int)get_timer(time_disp_init));
#endif
#ifdef LK_PROFILING
time_load_logo = get_timer(0);
#endif
#ifdef CONFIG_CFB_CONSOLE
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
drv_video_init();
#endif
#endif
//#endif
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
mboot_common_load_logo((unsigned long)mt_get_logo_db_addr(), "logo");
dprintf(INFO, "Show BLACK_PICTURE\n");
#endif
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
if(!is_low_battery(0))
{
#endif
mt_disp_fill_rect(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT, 0x0);
mt_disp_power(TRUE);
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_wait_idle();
mt_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);
mt_disp_wait_idle();
mt_disp_power(1); //power on display related modules
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- load_logo takes %d ms -------- \n", get_timer(time_load_logo));
time_backlight = get_timer(0);
#endif
/*for kpd pmic mode setting*/
set_kpd_pmic_mode();
//FIXME: Disable for MT6582 FPGA Ealry Porting
//#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
if(!is_low_battery(0))
{
#endif
/*some lcm panel need more time to start show picture*/
msleep(50);
mt65xx_backlight_on();
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
//#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- backlight takes %d ms -------- \n", get_timer(time_backlight));
time_boot_mode = get_timer(0);
#endif
boot_mode_select();
#ifdef LK_PROFILING
printf("[PROFILE] ------- boot mode select takes %d ms -------- \n", get_timer(time_boot_mode));
#endif
#ifdef MTK_SECURITY_SW_SUPPORT
#ifdef LK_PROFILING
time_security_init = get_timer(0);
#endif
/* initialize security library */
#ifdef MTK_EMMC_SUPPORT
sec_func_init(1);
#else
sec_func_init(0);
#endif
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- Security init takes %d ms -------- \n", (int)get_timer(time_security_init));
#endif
#endif
/*Show download logo & message on screen */
if (g_boot_arg->boot_mode == DOWNLOAD_BOOT)
{
printf("[LK] boot mode is DOWNLOAD_BOOT\n");
#ifdef MTK_SECURITY_SW_SUPPORT
/* verify da before jumping to da*/
if (sec_usbdl_enabled()) {
u8 *da_addr = (u8 *)g_boot_arg->da_info.addr;
u32 da_len = g_boot_arg->da_info.len;
u32 sig_len = g_boot_arg->da_info.sig_len;
u8 *sig_addr = (unsigned char *)da_addr + (da_len - sig_len);
if (da_len == 0 || sig_len == 0) {
printf("[LK] da argument is invalid\n");
printf("da_addr = 0x%x\n", da_addr);
printf("da_len = 0x%x\n", da_len);
printf("sig_len = 0x%x\n", sig_len);
}
if (sec_usbdl_verify_da(da_addr, (da_len - sig_len), sig_addr, sig_len)) {
/* da verify fail */
video_printf(" => Not authenticated tool, download stop...\n");
while(1); /* fix me, should not be infinite loop in lk */
}
}
else
#endif
{
printf(" DA verification disabled...\n");
}
mt_disp_show_boot_logo();
video_printf(" => Downloading...\n");
mt65xx_backlight_on();
mtk_wdt_disable();//Disable wdt before jump to DA
platform_uninit();
#ifdef HAVE_CACHE_PL310
l2_disable();
#endif
#ifdef ENABLE_L2_SHARING
config_shared_SRAM_size();
#endif
arch_disable_cache(UCACHE);
arch_disable_mmu();
jump_da(g_boot_arg->da_info.addr, g_boot_arg->da_info.arg1, g_boot_arg->da_info.arg2);
}
#ifdef LK_PROFILING
time_bat_init = get_timer(0);
#endif
mt65xx_bat_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- battery init takes %d ms -------- \n", get_timer(time_bat_init));
#endif
#ifndef CFG_POWER_CHARGING
#ifdef LK_PROFILING
time_RTC_boot_Check = get_timer(0);
#endif
/* NOTE: if define CFG_POWER_CHARGING, will rtc_boot_check() in mt65xx_bat_init() */
rtc_boot_check(false);
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- RTC boot check Init takes %d ms -------- \n", (int)get_timer(time_RTC_boot_Check));
#endif
#endif
#ifdef LK_PROFILING
time_show_logo = get_timer(0);
#endif
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
if(kernel_charging_boot() == 1)
{
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
CHARGER_TYPE CHR_Type_num = CHARGER_UNKNOWN;
charging_get_charger_type(&CHR_Type_num);
if ((g_boot_mode != LOW_POWER_OFF_CHARGING_BOOT) ||
((CHR_Type_num != STANDARD_HOST) && (CHR_Type_num != NONSTANDARD_CHARGER)))
{
dprintf(INFO, "[PROFILE] ------- g_boot_mode = %d -------- \n", g_boot_mode);
#endif
mt_disp_power(TRUE);
mt_disp_show_low_battery();
mt_disp_wait_idle();
mt65xx_leds_brightness_set(6, 110);
#ifdef MTK_BATLOWV_NO_PANEL_ON_EARLY
}
#endif
}
else if(g_boot_mode != KERNEL_POWER_OFF_CHARGING_BOOT && g_boot_mode != LOW_POWER_OFF_CHARGING_BOOT)
{
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if (g_boot_mode != ALARM_BOOT && (g_boot_mode != FASTBOOT))
{
mt_disp_show_boot_logo();
}
#endif
}
#else
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if (g_boot_mode != ALARM_BOOT && (g_boot_mode != FASTBOOT))
{
mt_disp_show_boot_logo();
}
#endif
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- show logo takes %d ms -------- \n", get_timer(time_show_logo));
time_sw_env= get_timer(0);
#endif
//sw_env();
#ifdef LK_PROFILING
printf("[PROFILE] ------- sw_env takes %d ms -------- \n", get_timer(time_sw_env));
printf("[PROFILE] ------- platform_init takes %d ms -------- \n", get_timer(time_platform_init));
#endif
}
void boot_mode_menu_select()
{
int select = 0; // 0=recovery mode, 1=fastboot. 2=normal boot 3=normal boot + ftrace.4=slub debug off
const char* title_msg = "Select Boot Mode:\n[VOLUME_UP to select. VOLUME_DOWN is OK.]\n\n";
video_clean_screen();
video_set_cursor(video_get_rows()/2, 0);
video_printf(title_msg);
video_printf("[Recovery Mode] <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
video_printf("[Fastboot Mode] \n");
#endif
video_printf("[Normal Boot] \n");
#ifndef USER_BUILD
video_printf("[Normal Boot +ftrace] \n");
video_printf("[Normal slub debug off] \n");
#endif
#if (defined(MTK_NCP1851_SUPPORT) || defined(MTK_BQ24196_SUPPORT))
mt_disp_power(TRUE);
#endif
#if (defined(MTK_NCP1851_SUPPORT) || defined(MTK_BQ24196_SUPPORT))
mt65xx_backlight_on();
#endif
while(1)
{
if(mtk_detect_key(MT65XX_MENU_SELECT_KEY))//VOL_UP
{
g_boot_menu = true;
switch(select) {
case 0:
#ifdef MTK_FASTBOOT_SUPPORT
select = 1;
video_set_cursor(video_get_rows()/2, 0);
video_printf(title_msg);
video_printf("[Recovery Mode] \n");
video_printf("[Fastboot Mode] <<==\n");
video_printf("[Normal Boot] \n");
#ifndef USER_BUILD
video_printf("[Normal Boot +ftrace] \n");
video_printf("[Normal slub debug off] \n");
#endif
break;
#endif
case 1:
select = 2;
video_set_cursor(video_get_rows()/2, 0);
video_printf(title_msg);
video_printf("[Recovery Mode] \n");
#ifdef MTK_FASTBOOT_SUPPORT
video_printf("[Fastboot Mode] \n");
#endif
video_printf("[Normal Boot] <<==\n");
#ifndef USER_BUILD
video_printf("[Normal Boot +ftrace] \n");
video_printf("[Normal slub debug off] \n");
#endif
break;
case 2:
#ifdef USER_BUILD
select = 0;
#else
select = 3;
#endif
video_set_cursor(video_get_rows()/2, 0);
video_printf(title_msg);
#ifdef USER_BUILD
video_printf("[Recovery Mode] <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
video_printf("[Fastboot Mode] \n");
#endif
video_printf("[Normal Boot] \n");
#else
video_printf("[Recovery Mode] \n");
#ifdef MTK_FASTBOOT_SUPPORT
video_printf("[Fastboot Mode] \n");
#endif
video_printf("[Normal Boot] \n");
video_printf("[Normal Boot +ftrace] <<==\n");
video_printf("[Normal slub debug off] \n");
#endif
break;
#ifndef USER_BUILD
case 3:
select = 4;
video_set_cursor(video_get_rows()/2, 0);
video_printf(title_msg);
video_printf("[Recovery Mode] \n");
#ifdef MTK_FASTBOOT_SUPPORT
video_printf("[Fastboot Mode] \n");
#endif
video_printf("[Normal Boot] \n");
video_printf("[Normal Boot +ftrace] \n");
video_printf("[Normal slub debug off] <<==\n");
break;
#endif
#ifndef USER_BUILD
case 4:
select = 0;
video_set_cursor(video_get_rows()/2, 0);
video_printf(title_msg);
video_printf("[Recovery Mode] <<==\n");
#ifdef MTK_FASTBOOT_SUPPORT
video_printf("[Fastboot Mode] \n");
#endif
video_printf("[Normal Boot] \n");
video_printf("[Normal Boot +ftrace] \n");
video_printf("[Normal slub debug off] \n");
break;
#endif
default:
break;
}
dprintf(0, "[VOL_UP]Key Detect, current select:%d\n", select);
mdelay(300);
}
else if(mtk_detect_key(MT65XX_MENU_OK_KEY))//VOL_DOWN,
{
//use for OK
break;
}
else
{
//pass
}
}
if(select == 0)
{
g_boot_mode = RECOVERY_BOOT;
}
else if(select == 1)
{
g_boot_mode = FASTBOOT;
}
else if(select == 2)
{
g_boot_mode = NORMAL_BOOT;
}
else if(select == 3)
{
sprintf(g_CMDLINE, "%s trace_buf_size=11m boot_time_ftrace", g_CMDLINE);
g_boot_mode = NORMAL_BOOT;
}
else if (select == 4)
{
sprintf(g_CMDLINE, "%s slub_debug=-", g_CMDLINE);
g_boot_mode = NORMAL_BOOT;
}
else{
//pass
}
video_set_cursor(video_get_rows()/2 +8, 0);
return;
}