/**
* adreno_drawctxt_detach(): detach a context from the GPU
* @context: Generic KGSL context container for the context
*
*/
int adreno_drawctxt_detach(struct kgsl_context *context)
{
struct kgsl_device *device;
struct adreno_device *adreno_dev;
struct adreno_context *drawctxt;
int ret;
if (context == NULL)
return 0;
device = context->device;
adreno_dev = ADRENO_DEVICE(device);
drawctxt = ADRENO_CONTEXT(context);
/* deactivate context */
if (adreno_dev->drawctxt_active == drawctxt)
adreno_drawctxt_switch(adreno_dev, NULL, 0);
spin_lock(&drawctxt->lock);
while (drawctxt->cmdqueue_head != drawctxt->cmdqueue_tail) {
struct kgsl_cmdbatch *cmdbatch =
drawctxt->cmdqueue[drawctxt->cmdqueue_head];
drawctxt->cmdqueue_head = (drawctxt->cmdqueue_head + 1) %
ADRENO_CONTEXT_CMDQUEUE_SIZE;
spin_unlock(&drawctxt->lock);
/*
* If the context is deteached while we are waiting for
* the next command in GFT SKIP CMD, print the context
* detached status here.
*/
adreno_fault_skipcmd_detached(device, drawctxt, cmdbatch);
/*
* Don't hold the drawctxt mutex while the cmdbatch is being
* destroyed because the cmdbatch destroy takes the device
* mutex and the world falls in on itself
*/
kgsl_cmdbatch_destroy(cmdbatch);
spin_lock(&drawctxt->lock);
}
spin_unlock(&drawctxt->lock);
/*
* internal_timestamp is set in adreno_ringbuffer_addcmds,
* which holds the device mutex. The entire context destroy
* process requires the device mutex as well. But lets
* make sure we notice if the locking changes.
*/
BUG_ON(!mutex_is_locked(&device->mutex));
/* Wait for the last global timestamp to pass before continuing.
* The maxumum wait time is 30s, some large IB's can take longer
* than 10s and if hang happens then the time for the context's
* commands to retire will be greater than 10s. 30s should be sufficient
* time to wait for the commands even if a hang happens.
*/
ret = adreno_drawctxt_wait_global(adreno_dev, context,
drawctxt->internal_timestamp, 30 * 1000);
/*
* If the wait for global fails then nothing after this point is likely
* to work very well - BUG_ON() so we can take advantage of the debug
* tools to figure out what the h - e - double hockey sticks happened
*/
BUG_ON(ret);
kgsl_sharedmem_writel(device, &device->memstore,
KGSL_MEMSTORE_OFFSET(context->id, soptimestamp),
drawctxt->timestamp);
kgsl_sharedmem_writel(device, &device->memstore,
KGSL_MEMSTORE_OFFSET(context->id, eoptimestamp),
drawctxt->timestamp);
adreno_profile_process_results(device);
if (drawctxt->ops && drawctxt->ops->detach)
drawctxt->ops->detach(drawctxt);
/* wake threads waiting to submit commands from this context */
wake_up_all(&drawctxt->waiting);
wake_up_all(&drawctxt->wq);
return ret;
}
/**
* ubifs_wbuf_write_nolock - write data to flash via write-buffer.
* @wbuf: write-buffer
* @buf: node to write
* @len: node length
*
* This function writes data to flash via write-buffer @wbuf. This means that
* the last piece of the node won't reach the flash media immediately if it
* does not take whole max. write unit (@c->max_write_size). Instead, the node
* will sit in RAM until the write-buffer is synchronized (e.g., by timer, or
* because more data are appended to the write-buffer).
*
* This function returns zero in case of success and a negative error code in
* case of failure. If the node cannot be written because there is no more
* space in this logical eraseblock, %-ENOSPC is returned.
*/
int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len)
{
struct ubifs_info *c = wbuf->c;
int err, written, n, aligned_len = ALIGN(len, 8);
dbg_io("%d bytes (%s) to jhead %s wbuf at LEB %d:%d", len,
dbg_ntype(((struct ubifs_ch *)buf)->node_type),
dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs + wbuf->used);
ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt);
ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0);
ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size);
ubifs_assert(wbuf->avail > 0 && wbuf->avail <= wbuf->size);
ubifs_assert(wbuf->size >= c->min_io_size);
ubifs_assert(wbuf->size <= c->max_write_size);
ubifs_assert(wbuf->size % c->min_io_size == 0);
ubifs_assert(mutex_is_locked(&wbuf->io_mutex));
ubifs_assert(!c->ro_media && !c->ro_mount);
ubifs_assert(!c->space_fixup);
if (c->leb_size - wbuf->offs >= c->max_write_size)
ubifs_assert(!((wbuf->offs + wbuf->size) % c->max_write_size));
if (c->leb_size - wbuf->offs - wbuf->used < aligned_len) {
err = -ENOSPC;
goto out;
}
cancel_wbuf_timer_nolock(wbuf);
if (c->ro_error)
return -EROFS;
if (aligned_len <= wbuf->avail) {
/*
* The node is not very large and fits entirely within
* write-buffer.
*/
memcpy(wbuf->buf + wbuf->used, buf, len);
if (aligned_len == wbuf->avail) {
dbg_io("flush jhead %s wbuf to LEB %d:%d",
dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf,
wbuf->offs, wbuf->size,
wbuf->dtype);
if (err)
goto out;
spin_lock(&wbuf->lock);
wbuf->offs += wbuf->size;
if (c->leb_size - wbuf->offs >= c->max_write_size)
wbuf->size = c->max_write_size;
else
wbuf->size = c->leb_size - wbuf->offs;
wbuf->avail = wbuf->size;
wbuf->used = 0;
wbuf->next_ino = 0;
spin_unlock(&wbuf->lock);
} else {
spin_lock(&wbuf->lock);
wbuf->avail -= aligned_len;
wbuf->used += aligned_len;
spin_unlock(&wbuf->lock);
}
goto exit;
}
written = 0;
if (wbuf->used) {
/*
* The node is large enough and does not fit entirely within
* current available space. We have to fill and flush
* write-buffer and switch to the next max. write unit.
*/
dbg_io("flush jhead %s wbuf to LEB %d:%d",
dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs);
memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs,
wbuf->size, wbuf->dtype);
if (err)
goto out;
wbuf->offs += wbuf->size;
len -= wbuf->avail;
aligned_len -= wbuf->avail;
written += wbuf->avail;
} else if (wbuf->offs & (c->max_write_size - 1)) {
/*
* The write-buffer offset is not aligned to
* @c->max_write_size and @wbuf->size is less than
* @c->max_write_size. Write @wbuf->size bytes to make sure the
* following writes are done in optimal @c->max_write_size
* chunks.
*/
dbg_io("write %d bytes to LEB %d:%d",
wbuf->size, wbuf->lnum, wbuf->offs);
err = ubi_leb_write(c->ubi, wbuf->lnum, buf, wbuf->offs,
wbuf->size, wbuf->dtype);
if (err)
goto out;
wbuf->offs += wbuf->size;
len -= wbuf->size;
aligned_len -= wbuf->size;
written += wbuf->size;
}
/*
* The remaining data may take more whole max. write units, so write the
* remains multiple to max. write unit size directly to the flash media.
* We align node length to 8-byte boundary because we anyway flash wbuf
* if the remaining space is less than 8 bytes.
*/
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum,
wbuf->offs);
err = ubi_leb_write(c->ubi, wbuf->lnum, buf + written,
wbuf->offs, n, wbuf->dtype);
if (err)
goto out;
wbuf->offs += n;
aligned_len -= n;
len -= n;
written += n;
}
spin_lock(&wbuf->lock);
if (aligned_len)
/*
* And now we have what's left and what does not take whole
* max. write unit, so write it to the write-buffer and we are
* done.
*/
memcpy(wbuf->buf, buf + written, len);
if (c->leb_size - wbuf->offs >= c->max_write_size)
wbuf->size = c->max_write_size;
else
wbuf->size = c->leb_size - wbuf->offs;
wbuf->avail = wbuf->size - aligned_len;
wbuf->used = aligned_len;
wbuf->next_ino = 0;
spin_unlock(&wbuf->lock);
exit:
if (wbuf->sync_callback) {
int free = c->leb_size - wbuf->offs - wbuf->used;
err = wbuf->sync_callback(c, wbuf->lnum, free, 0);
if (err)
goto out;
}
if (wbuf->used)
new_wbuf_timer_nolock(wbuf);
return 0;
out:
ubifs_err("cannot write %d bytes to LEB %d:%d, error %d",
len, wbuf->lnum, wbuf->offs, err);
dbg_dump_node(c, buf);
dbg_dump_stack();
dbg_dump_leb(c, wbuf->lnum);
return err;
}
int cpu_maps_is_updating(void)
{
return mutex_is_locked(&cpu_add_remove_lock);
}
/**
* adreno_drawctxt_wait() - sleep until a timestamp expires
* @adreno_dev: pointer to the adreno_device struct
* @drawctxt: Pointer to the draw context to sleep for
* @timetamp: Timestamp to wait on
* @timeout: Number of jiffies to wait (0 for infinite)
*
* Register an event to wait for a timestamp on a context and sleep until it
* has past. Returns < 0 on error, -ETIMEDOUT if the timeout expires or 0
* on success
*/
int adreno_drawctxt_wait(struct adreno_device *adreno_dev,
struct kgsl_context *context,
uint32_t timestamp, unsigned int timeout)
{
static unsigned int io_cnt;
struct kgsl_device *device = &adreno_dev->dev;
struct kgsl_pwrctrl *pwr = &device->pwrctrl;
struct adreno_context *drawctxt = ADRENO_CONTEXT(context);
int ret, io;
if (kgsl_context_detached(context))
return -EINVAL;
if (drawctxt->state == ADRENO_CONTEXT_STATE_INVALID)
return -EDEADLK;
/* Needs to hold the device mutex */
BUG_ON(!mutex_is_locked(&device->mutex));
trace_adreno_drawctxt_wait_start(context->id, timestamp);
ret = kgsl_add_event(device, &context->events, timestamp,
wait_callback, (void *) drawctxt);
if (ret)
goto done;
/*
* For proper power accounting sometimes we need to call
* io_wait_interruptible_timeout and sometimes we need to call
* plain old wait_interruptible_timeout. We call the regular
* timeout N times out of 100, where N is a number specified by
* the current power level
*/
io_cnt = (io_cnt + 1) % 100;
io = (io_cnt < pwr->pwrlevels[pwr->active_pwrlevel].io_fraction)
? 0 : 1;
kgsl_mutex_unlock(&device->mutex, &device->mutex_owner);
if (timeout) {
ret = (int) adreno_wait_event_interruptible_timeout(
drawctxt->waiting,
_check_context_timestamp(device, drawctxt, timestamp),
msecs_to_jiffies(timeout), io);
if (ret == 0)
ret = -ETIMEDOUT;
else if (ret > 0)
ret = 0;
} else {
ret = (int) adreno_wait_event_interruptible(drawctxt->waiting,
_check_context_timestamp(device, drawctxt, timestamp),
io);
}
kgsl_mutex_lock(&device->mutex, &device->mutex_owner);
/* -EDEADLK if the context was invalidated while we were waiting */
if (drawctxt->state == ADRENO_CONTEXT_STATE_INVALID)
ret = -EDEADLK;
/* Return -EINVAL if the context was detached while we were waiting */
if (kgsl_context_detached(context))
ret = -EINVAL;
done:
trace_adreno_drawctxt_wait_done(context->id, timestamp, ret);
return ret;
}
/*
* Lookup a dquot in the incore dquot hashtable. We keep two separate
* hashtables for user and group dquots; and, these are global tables
* inside the XQM, not per-filesystem tables.
* The hash chain must be locked by caller, and it is left locked
* on return. Returning dquot is locked.
*/
STATIC int
xfs_qm_dqlookup(
xfs_mount_t *mp,
xfs_dqid_t id,
xfs_dqhash_t *qh,
xfs_dquot_t **O_dqpp)
{
xfs_dquot_t *dqp;
uint flist_locked;
xfs_dquot_t *d;
ASSERT(mutex_is_locked(&qh->qh_lock));
flist_locked = B_FALSE;
/*
* Traverse the hashchain looking for a match
*/
for (dqp = qh->qh_next; dqp != NULL; dqp = dqp->HL_NEXT) {
/*
* We already have the hashlock. We don't need the
* dqlock to look at the id field of the dquot, since the
* id can't be modified without the hashlock anyway.
*/
if (be32_to_cpu(dqp->q_core.d_id) == id && dqp->q_mount == mp) {
xfs_dqtrace_entry(dqp, "DQFOUND BY LOOKUP");
/*
* All in core dquots must be on the dqlist of mp
*/
ASSERT(dqp->MPL_PREVP != NULL);
xfs_dqlock(dqp);
if (dqp->q_nrefs == 0) {
ASSERT (XFS_DQ_IS_ON_FREELIST(dqp));
if (! xfs_qm_freelist_lock_nowait(xfs_Gqm)) {
xfs_dqtrace_entry(dqp, "DQLOOKUP: WANT");
/*
* We may have raced with dqreclaim_one()
* (and lost). So, flag that we don't
* want the dquot to be reclaimed.
*/
dqp->dq_flags |= XFS_DQ_WANT;
xfs_dqunlock(dqp);
xfs_qm_freelist_lock(xfs_Gqm);
xfs_dqlock(dqp);
dqp->dq_flags &= ~(XFS_DQ_WANT);
}
flist_locked = B_TRUE;
}
/*
* id couldn't have changed; we had the hashlock all
* along
*/
ASSERT(be32_to_cpu(dqp->q_core.d_id) == id);
if (flist_locked) {
if (dqp->q_nrefs != 0) {
xfs_qm_freelist_unlock(xfs_Gqm);
flist_locked = B_FALSE;
} else {
/*
* take it off the freelist
*/
xfs_dqtrace_entry(dqp,
"DQLOOKUP: TAKEOFF FL");
XQM_FREELIST_REMOVE(dqp);
/* xfs_qm_freelist_print(&(xfs_Gqm->
qm_dqfreelist),
"after removal"); */
}
}
/*
* grab a reference
*/
XFS_DQHOLD(dqp);
if (flist_locked)
xfs_qm_freelist_unlock(xfs_Gqm);
/*
* move the dquot to the front of the hashchain
*/
ASSERT(mutex_is_locked(&qh->qh_lock));
if (dqp->HL_PREVP != &qh->qh_next) {
xfs_dqtrace_entry(dqp,
"DQLOOKUP: HASH MOVETOFRONT");
if ((d = dqp->HL_NEXT))
d->HL_PREVP = dqp->HL_PREVP;
*(dqp->HL_PREVP) = d;
d = qh->qh_next;
d->HL_PREVP = &dqp->HL_NEXT;
dqp->HL_NEXT = d;
dqp->HL_PREVP = &qh->qh_next;
qh->qh_next = dqp;
}
xfs_dqtrace_entry(dqp, "LOOKUP END");
*O_dqpp = dqp;
ASSERT(mutex_is_locked(&qh->qh_lock));
return (0);
}
}
*O_dqpp = NULL;
ASSERT(mutex_is_locked(&qh->qh_lock));
return (1);
}
/*
* Given the file system, inode OR id, and type (UDQUOT/GDQUOT), return a
* a locked dquot, doing an allocation (if requested) as needed.
* When both an inode and an id are given, the inode's id takes precedence.
* That is, if the id changes while we don't hold the ilock inside this
* function, the new dquot is returned, not necessarily the one requested
* in the id argument.
*/
int
xfs_qm_dqget(
xfs_mount_t *mp,
xfs_inode_t *ip, /* locked inode (optional) */
xfs_dqid_t id, /* uid/projid/gid depending on type */
uint type, /* XFS_DQ_USER/XFS_DQ_PROJ/XFS_DQ_GROUP */
uint flags, /* DQALLOC, DQSUSER, DQREPAIR, DOWARN */
xfs_dquot_t **O_dqpp) /* OUT : locked incore dquot */
{
xfs_dquot_t *dqp;
xfs_dqhash_t *h;
uint version;
int error;
ASSERT(XFS_IS_QUOTA_RUNNING(mp));
if ((! XFS_IS_UQUOTA_ON(mp) && type == XFS_DQ_USER) ||
(! XFS_IS_PQUOTA_ON(mp) && type == XFS_DQ_PROJ) ||
(! XFS_IS_GQUOTA_ON(mp) && type == XFS_DQ_GROUP)) {
return (ESRCH);
}
h = XFS_DQ_HASH(mp, id, type);
#ifdef DEBUG
if (xfs_do_dqerror) {
if ((xfs_dqerror_target == mp->m_ddev_targp) &&
(xfs_dqreq_num++ % xfs_dqerror_mod) == 0) {
cmn_err(CE_DEBUG, "Returning error in dqget");
return (EIO);
}
}
#endif
again:
#ifdef DEBUG
ASSERT(type == XFS_DQ_USER ||
type == XFS_DQ_PROJ ||
type == XFS_DQ_GROUP);
if (ip) {
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
if (type == XFS_DQ_USER)
ASSERT(ip->i_udquot == NULL);
else
ASSERT(ip->i_gdquot == NULL);
}
#endif
mutex_lock(&h->qh_lock);
/*
* Look in the cache (hashtable).
* The chain is kept locked during lookup.
*/
if (xfs_qm_dqlookup(mp, id, h, O_dqpp) == 0) {
XQM_STATS_INC(xqmstats.xs_qm_dqcachehits);
/*
* The dquot was found, moved to the front of the chain,
* taken off the freelist if it was on it, and locked
* at this point. Just unlock the hashchain and return.
*/
ASSERT(*O_dqpp);
ASSERT(XFS_DQ_IS_LOCKED(*O_dqpp));
mutex_unlock(&h->qh_lock);
xfs_dqtrace_entry(*O_dqpp, "DQGET DONE (FROM CACHE)");
return (0); /* success */
}
XQM_STATS_INC(xqmstats.xs_qm_dqcachemisses);
/*
* Dquot cache miss. We don't want to keep the inode lock across
* a (potential) disk read. Also we don't want to deal with the lock
* ordering between quotainode and this inode. OTOH, dropping the inode
* lock here means dealing with a chown that can happen before
* we re-acquire the lock.
*/
if (ip)
xfs_iunlock(ip, XFS_ILOCK_EXCL);
/*
* Save the hashchain version stamp, and unlock the chain, so that
* we don't keep the lock across a disk read
*/
version = h->qh_version;
mutex_unlock(&h->qh_lock);
/*
* Allocate the dquot on the kernel heap, and read the ondisk
* portion off the disk. Also, do all the necessary initialization
* This can return ENOENT if dquot didn't exist on disk and we didn't
* ask it to allocate; ESRCH if quotas got turned off suddenly.
*/
if ((error = xfs_qm_idtodq(mp, id, type,
flags & (XFS_QMOPT_DQALLOC|XFS_QMOPT_DQREPAIR|
XFS_QMOPT_DOWARN),
&dqp))) {
if (ip)
xfs_ilock(ip, XFS_ILOCK_EXCL);
return (error);
}
/*
* See if this is mount code calling to look at the overall quota limits
* which are stored in the id == 0 user or group's dquot.
* Since we may not have done a quotacheck by this point, just return
* the dquot without attaching it to any hashtables, lists, etc, or even
* taking a reference.
* The caller must dqdestroy this once done.
*/
if (flags & XFS_QMOPT_DQSUSER) {
ASSERT(id == 0);
ASSERT(! ip);
goto dqret;
}
/*
* Dquot lock comes after hashlock in the lock ordering
*/
if (ip) {
xfs_ilock(ip, XFS_ILOCK_EXCL);
if (! XFS_IS_DQTYPE_ON(mp, type)) {
/* inode stays locked on return */
xfs_qm_dqdestroy(dqp);
return XFS_ERROR(ESRCH);
}
/*
* A dquot could be attached to this inode by now, since
* we had dropped the ilock.
*/
if (type == XFS_DQ_USER) {
if (ip->i_udquot) {
xfs_qm_dqdestroy(dqp);
dqp = ip->i_udquot;
xfs_dqlock(dqp);
goto dqret;
}
} else {
if (ip->i_gdquot) {
xfs_qm_dqdestroy(dqp);
dqp = ip->i_gdquot;
xfs_dqlock(dqp);
goto dqret;
}
}
}
/*
* Hashlock comes after ilock in lock order
*/
mutex_lock(&h->qh_lock);
if (version != h->qh_version) {
xfs_dquot_t *tmpdqp;
/*
* Now, see if somebody else put the dquot in the
* hashtable before us. This can happen because we didn't
* keep the hashchain lock. We don't have to worry about
* lock order between the two dquots here since dqp isn't
* on any findable lists yet.
*/
if (xfs_qm_dqlookup(mp, id, h, &tmpdqp) == 0) {
/*
* Duplicate found. Just throw away the new dquot
* and start over.
*/
xfs_qm_dqput(tmpdqp);
mutex_unlock(&h->qh_lock);
xfs_qm_dqdestroy(dqp);
XQM_STATS_INC(xqmstats.xs_qm_dquot_dups);
goto again;
}
}
/*
* Put the dquot at the beginning of the hash-chain and mp's list
* LOCK ORDER: hashlock, freelistlock, mplistlock, udqlock, gdqlock ..
*/
ASSERT(mutex_is_locked(&h->qh_lock));
dqp->q_hash = h;
XQM_HASHLIST_INSERT(h, dqp);
/*
* Attach this dquot to this filesystem's list of all dquots,
* kept inside the mount structure in m_quotainfo field
*/
xfs_qm_mplist_lock(mp);
/*
* We return a locked dquot to the caller, with a reference taken
*/
xfs_dqlock(dqp);
dqp->q_nrefs = 1;
XQM_MPLIST_INSERT(&(XFS_QI_MPL_LIST(mp)), dqp);
xfs_qm_mplist_unlock(mp);
mutex_unlock(&h->qh_lock);
dqret:
ASSERT((ip == NULL) || xfs_isilocked(ip, XFS_ILOCK_EXCL));
xfs_dqtrace_entry(dqp, "DQGET DONE");
*O_dqpp = dqp;
return (0);
}
/***
* mutex_destroy - mark a mutex unusable
* @lock: the mutex to be destroyed
*
* This function marks the mutex uninitialized, and any subsequent
* use of the mutex is forbidden. The mutex must not be locked when
* this function is called.
*/
void mutex_destroy(struct mutex *lock)
{
DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock));
lock->magic = NULL;
}
/* ARGSUSED */
int
xfs_qm_dqpurge(
xfs_dquot_t *dqp)
{
xfs_dqhash_t *thishash;
xfs_mount_t *mp = dqp->q_mount;
ASSERT(XFS_QM_IS_MPLIST_LOCKED(mp));
ASSERT(mutex_is_locked(&dqp->q_hash->qh_lock));
xfs_dqlock(dqp);
/*
* We really can't afford to purge a dquot that is
* referenced, because these are hard refs.
* It shouldn't happen in general because we went thru _all_ inodes in
* dqrele_all_inodes before calling this and didn't let the mountlock go.
* However it is possible that we have dquots with temporary
* references that are not attached to an inode. e.g. see xfs_setattr().
*/
if (dqp->q_nrefs != 0) {
xfs_dqunlock(dqp);
mutex_unlock(&dqp->q_hash->qh_lock);
return (1);
}
ASSERT(XFS_DQ_IS_ON_FREELIST(dqp));
/*
* If we're turning off quotas, we have to make sure that, for
* example, we don't delete quota disk blocks while dquots are
* in the process of getting written to those disk blocks.
* This dquot might well be on AIL, and we can't leave it there
* if we're turning off quotas. Basically, we need this flush
* lock, and are willing to block on it.
*/
if (!xfs_dqflock_nowait(dqp)) {
/*
* Block on the flush lock after nudging dquot buffer,
* if it is incore.
*/
xfs_qm_dqflock_pushbuf_wait(dqp);
}
/*
* XXXIf we're turning this type of quotas off, we don't care
* about the dirty metadata sitting in this dquot. OTOH, if
* we're unmounting, we do care, so we flush it and wait.
*/
if (XFS_DQ_IS_DIRTY(dqp)) {
int error;
xfs_dqtrace_entry(dqp, "DQPURGE ->DQFLUSH: DQDIRTY");
/* dqflush unlocks dqflock */
/*
* Given that dqpurge is a very rare occurrence, it is OK
* that we're holding the hashlist and mplist locks
* across the disk write. But, ... XXXsup
*
* We don't care about getting disk errors here. We need
* to purge this dquot anyway, so we go ahead regardless.
*/
error = xfs_qm_dqflush(dqp, XFS_QMOPT_SYNC);
if (error)
xfs_fs_cmn_err(CE_WARN, mp,
"xfs_qm_dqpurge: dquot %p flush failed", dqp);
xfs_dqflock(dqp);
}
ASSERT(atomic_read(&dqp->q_pincount) == 0);
ASSERT(XFS_FORCED_SHUTDOWN(mp) ||
!(dqp->q_logitem.qli_item.li_flags & XFS_LI_IN_AIL));
thishash = dqp->q_hash;
XQM_HASHLIST_REMOVE(thishash, dqp);
XQM_MPLIST_REMOVE(&(XFS_QI_MPL_LIST(mp)), dqp);
/*
* XXX Move this to the front of the freelist, if we can get the
* freelist lock.
*/
ASSERT(XFS_DQ_IS_ON_FREELIST(dqp));
dqp->q_mount = NULL;
dqp->q_hash = NULL;
dqp->dq_flags = XFS_DQ_INACTIVE;
memset(&dqp->q_core, 0, sizeof(dqp->q_core));
xfs_dqfunlock(dqp);
xfs_dqunlock(dqp);
mutex_unlock(&thishash->qh_lock);
return (0);
}
static int xattr_create(struct inode *dir, struct dentry *dentry, int mode)
{
BUG_ON(!mutex_is_locked(&dir->i_mutex));
return dir->i_op->create(dir, dentry, mode, NULL);
}
static int xattr_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
BUG_ON(!mutex_is_locked(&dir->i_mutex));
return dir->i_op->mkdir(dir, dentry, mode);
}
static void assert_key_lock(void)
{
WARN_ON(!mutex_is_locked(&key_mutex));
}
void kgsl_pwrscale_idle(struct kgsl_device *device)
{
BUG_ON(!mutex_is_locked(&device->mutex));
queue_work(device->pwrscale.devfreq_wq,
&device->pwrscale.devfreq_notify_ws);
}
static int ubifs_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *dentry)
{
struct ubifs_info *c = dir->i_sb->s_fs_info;
struct inode *inode = d_inode(old_dentry);
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_inode *dir_ui = ubifs_inode(dir);
int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
struct ubifs_budget_req req = { .new_dent = 1, .dirtied_ino = 2,
.dirtied_ino_d = ALIGN(ui->data_len, 8) };
/*
* Budget request settings: new direntry, changing the target inode,
* changing the parent inode.
*/
dbg_gen("dent '%pd' to ino %lu (nlink %d) in dir ino %lu",
dentry, inode->i_ino,
inode->i_nlink, dir->i_ino);
ubifs_assert(mutex_is_locked(&dir->i_mutex));
ubifs_assert(mutex_is_locked(&inode->i_mutex));
err = dbg_check_synced_i_size(c, inode);
if (err)
return err;
err = ubifs_budget_space(c, &req);
if (err)
return err;
lock_2_inodes(dir, inode);
inc_nlink(inode);
ihold(inode);
inode->i_ctime = ubifs_current_time(inode);
dir->i_size += sz_change;
dir_ui->ui_size = dir->i_size;
dir->i_mtime = dir->i_ctime = inode->i_ctime;
err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0);
if (err)
goto out_cancel;
unlock_2_inodes(dir, inode);
ubifs_release_budget(c, &req);
d_instantiate(dentry, inode);
return 0;
out_cancel:
dir->i_size -= sz_change;
dir_ui->ui_size = dir->i_size;
drop_nlink(inode);
unlock_2_inodes(dir, inode);
ubifs_release_budget(c, &req);
iput(inode);
return err;
}
static int ubifs_unlink(struct inode *dir, struct dentry *dentry)
{
struct ubifs_info *c = dir->i_sb->s_fs_info;
struct inode *inode = d_inode(dentry);
struct ubifs_inode *dir_ui = ubifs_inode(dir);
int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
int err, budgeted = 1;
struct ubifs_budget_req req = { .mod_dent = 1, .dirtied_ino = 2 };
unsigned int saved_nlink = inode->i_nlink;
/*
* Budget request settings: deletion direntry, deletion inode (+1 for
* @dirtied_ino), changing the parent directory inode. If budgeting
* fails, go ahead anyway because we have extra space reserved for
* deletions.
*/
dbg_gen("dent '%pd' from ino %lu (nlink %d) in dir ino %lu",
dentry, inode->i_ino,
inode->i_nlink, dir->i_ino);
ubifs_assert(mutex_is_locked(&dir->i_mutex));
ubifs_assert(mutex_is_locked(&inode->i_mutex));
err = dbg_check_synced_i_size(c, inode);
if (err)
return err;
err = ubifs_budget_space(c, &req);
if (err) {
if (err != -ENOSPC)
return err;
budgeted = 0;
}
lock_2_inodes(dir, inode);
inode->i_ctime = ubifs_current_time(dir);
drop_nlink(inode);
dir->i_size -= sz_change;
dir_ui->ui_size = dir->i_size;
dir->i_mtime = dir->i_ctime = inode->i_ctime;
err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 1, 0);
if (err)
goto out_cancel;
unlock_2_inodes(dir, inode);
if (budgeted)
ubifs_release_budget(c, &req);
else {
/* We've deleted something - clean the "no space" flags */
c->bi.nospace = c->bi.nospace_rp = 0;
smp_wmb();
}
return 0;
out_cancel:
dir->i_size += sz_change;
dir_ui->ui_size = dir->i_size;
set_nlink(inode, saved_nlink);
unlock_2_inodes(dir, inode);
if (budgeted)
ubifs_release_budget(c, &req);
return err;
}
/**
* check_dir_empty - check if a directory is empty or not.
* @c: UBIFS file-system description object
* @dir: VFS inode object of the directory to check
*
* This function checks if directory @dir is empty. Returns zero if the
* directory is empty, %-ENOTEMPTY if it is not, and other negative error codes
* in case of of errors.
*/
static int check_dir_empty(struct ubifs_info *c, struct inode *dir)
{
struct qstr nm = { .name = NULL };
struct ubifs_dent_node *dent;
union ubifs_key key;
int err;
lowest_dent_key(c, &key, dir->i_ino);
dent = ubifs_tnc_next_ent(c, &key, &nm);
if (IS_ERR(dent)) {
err = PTR_ERR(dent);
if (err == -ENOENT)
err = 0;
} else {
kfree(dent);
err = -ENOTEMPTY;
}
return err;
}
static int ubifs_rmdir(struct inode *dir, struct dentry *dentry)
{
struct ubifs_info *c = dir->i_sb->s_fs_info;
struct inode *inode = d_inode(dentry);
int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
int err, budgeted = 1;
struct ubifs_inode *dir_ui = ubifs_inode(dir);
struct ubifs_budget_req req = { .mod_dent = 1, .dirtied_ino = 2 };
/*
* Budget request settings: deletion direntry, deletion inode and
* changing the parent inode. If budgeting fails, go ahead anyway
* because we have extra space reserved for deletions.
*/
dbg_gen("directory '%pd', ino %lu in dir ino %lu", dentry,
inode->i_ino, dir->i_ino);
ubifs_assert(mutex_is_locked(&dir->i_mutex));
ubifs_assert(mutex_is_locked(&inode->i_mutex));
err = check_dir_empty(c, d_inode(dentry));
if (err)
return err;
err = ubifs_budget_space(c, &req);
if (err) {
if (err != -ENOSPC)
return err;
budgeted = 0;
}
lock_2_inodes(dir, inode);
inode->i_ctime = ubifs_current_time(dir);
clear_nlink(inode);
drop_nlink(dir);
dir->i_size -= sz_change;
dir_ui->ui_size = dir->i_size;
dir->i_mtime = dir->i_ctime = inode->i_ctime;
err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 1, 0);
if (err)
goto out_cancel;
unlock_2_inodes(dir, inode);
if (budgeted)
ubifs_release_budget(c, &req);
else {
/* We've deleted something - clean the "no space" flags */
c->bi.nospace = c->bi.nospace_rp = 0;
smp_wmb();
}
return 0;
out_cancel:
dir->i_size += sz_change;
dir_ui->ui_size = dir->i_size;
inc_nlink(dir);
set_nlink(inode, 2);
unlock_2_inodes(dir, inode);
if (budgeted)
ubifs_release_budget(c, &req);
return err;
}
static int ubifs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
{
struct inode *inode;
struct ubifs_inode *dir_ui = ubifs_inode(dir);
struct ubifs_info *c = dir->i_sb->s_fs_info;
int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
* directory inode.
*/
dbg_gen("dent '%pd', mode %#hx in dir ino %lu",
dentry, mode, dir->i_ino);
err = ubifs_budget_space(c, &req);
if (err)
return err;
inode = ubifs_new_inode(c, dir, S_IFDIR | mode);
if (IS_ERR(inode)) {
err = PTR_ERR(inode);
goto out_budg;
}
err = ubifs_init_security(dir, inode, &dentry->d_name);
if (err)
goto out_inode;
mutex_lock(&dir_ui->ui_mutex);
insert_inode_hash(inode);
inc_nlink(inode);
inc_nlink(dir);
dir->i_size += sz_change;
dir_ui->ui_size = dir->i_size;
dir->i_mtime = dir->i_ctime = inode->i_ctime;
err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0);
if (err) {
ubifs_err(c, "cannot create directory, error %d", err);
goto out_cancel;
}
mutex_unlock(&dir_ui->ui_mutex);
ubifs_release_budget(c, &req);
d_instantiate(dentry, inode);
return 0;
out_cancel:
dir->i_size -= sz_change;
dir_ui->ui_size = dir->i_size;
drop_nlink(dir);
mutex_unlock(&dir_ui->ui_mutex);
out_inode:
make_bad_inode(inode);
iput(inode);
out_budg:
ubifs_release_budget(c, &req);
return err;
}
static int ubifs_mknod(struct inode *dir, struct dentry *dentry,
umode_t mode, dev_t rdev)
{
struct inode *inode;
struct ubifs_inode *ui;
struct ubifs_inode *dir_ui = ubifs_inode(dir);
struct ubifs_info *c = dir->i_sb->s_fs_info;
union ubifs_dev_desc *dev = NULL;
int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
int err, devlen = 0;
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
.new_ino_d = ALIGN(devlen, 8),
.dirtied_ino = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
* directory inode.
*/
dbg_gen("dent '%pd' in dir ino %lu", dentry, dir->i_ino);
if (S_ISBLK(mode) || S_ISCHR(mode)) {
dev = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS);
if (!dev)
return -ENOMEM;
devlen = ubifs_encode_dev(dev, rdev);
}
err = ubifs_budget_space(c, &req);
if (err) {
kfree(dev);
return err;
}
inode = ubifs_new_inode(c, dir, mode);
if (IS_ERR(inode)) {
kfree(dev);
err = PTR_ERR(inode);
goto out_budg;
}
init_special_inode(inode, inode->i_mode, rdev);
inode->i_size = ubifs_inode(inode)->ui_size = devlen;
ui = ubifs_inode(inode);
ui->data = dev;
ui->data_len = devlen;
err = ubifs_init_security(dir, inode, &dentry->d_name);
if (err)
goto out_inode;
mutex_lock(&dir_ui->ui_mutex);
dir->i_size += sz_change;
dir_ui->ui_size = dir->i_size;
dir->i_mtime = dir->i_ctime = inode->i_ctime;
err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0);
if (err)
goto out_cancel;
mutex_unlock(&dir_ui->ui_mutex);
ubifs_release_budget(c, &req);
insert_inode_hash(inode);
d_instantiate(dentry, inode);
return 0;
out_cancel:
dir->i_size -= sz_change;
dir_ui->ui_size = dir->i_size;
mutex_unlock(&dir_ui->ui_mutex);
out_inode:
make_bad_inode(inode);
iput(inode);
out_budg:
ubifs_release_budget(c, &req);
return err;
}
static int ubifs_symlink(struct inode *dir, struct dentry *dentry,
const char *symname)
{
struct inode *inode;
struct ubifs_inode *ui;
struct ubifs_inode *dir_ui = ubifs_inode(dir);
struct ubifs_info *c = dir->i_sb->s_fs_info;
int err, len = strlen(symname);
int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
.new_ino_d = ALIGN(len, 8),
.dirtied_ino = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
* directory inode.
*/
dbg_gen("dent '%pd', target '%s' in dir ino %lu", dentry,
symname, dir->i_ino);
if (len > UBIFS_MAX_INO_DATA)
return -ENAMETOOLONG;
err = ubifs_budget_space(c, &req);
if (err)
return err;
inode = ubifs_new_inode(c, dir, S_IFLNK | S_IRWXUGO);
if (IS_ERR(inode)) {
err = PTR_ERR(inode);
goto out_budg;
}
ui = ubifs_inode(inode);
ui->data = kmalloc(len + 1, GFP_NOFS);
if (!ui->data) {
err = -ENOMEM;
goto out_inode;
}
memcpy(ui->data, symname, len);
((char *)ui->data)[len] = '\0';
inode->i_link = ui->data;
/*
* The terminating zero byte is not written to the flash media and it
* is put just to make later in-memory string processing simpler. Thus,
* data length is @len, not @len + %1.
*/
ui->data_len = len;
inode->i_size = ubifs_inode(inode)->ui_size = len;
err = ubifs_init_security(dir, inode, &dentry->d_name);
if (err)
goto out_inode;
mutex_lock(&dir_ui->ui_mutex);
dir->i_size += sz_change;
dir_ui->ui_size = dir->i_size;
dir->i_mtime = dir->i_ctime = inode->i_ctime;
err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0);
if (err)
goto out_cancel;
mutex_unlock(&dir_ui->ui_mutex);
ubifs_release_budget(c, &req);
insert_inode_hash(inode);
d_instantiate(dentry, inode);
return 0;
out_cancel:
dir->i_size -= sz_change;
dir_ui->ui_size = dir->i_size;
mutex_unlock(&dir_ui->ui_mutex);
out_inode:
make_bad_inode(inode);
iput(inode);
out_budg:
ubifs_release_budget(c, &req);
return err;
}
/**
* lock_3_inodes - a wrapper for locking three UBIFS inodes.
* @inode1: first inode
* @inode2: second inode
* @inode3: third inode
*
* This function is used for 'ubifs_rename()' and @inode1 may be the same as
* @inode2 whereas @inode3 may be %NULL.
*
* We do not implement any tricks to guarantee strict lock ordering, because
* VFS has already done it for us on the @i_mutex. So this is just a simple
* wrapper function.
*/
static void lock_3_inodes(struct inode *inode1, struct inode *inode2,
struct inode *inode3)
{
mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
if (inode2 != inode1)
mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
if (inode3)
mutex_lock_nested(&ubifs_inode(inode3)->ui_mutex, WB_MUTEX_3);
}
/**
* unlock_3_inodes - a wrapper for unlocking three UBIFS inodes for rename.
* @inode1: first inode
* @inode2: second inode
* @inode3: third inode
*/
static void unlock_3_inodes(struct inode *inode1, struct inode *inode2,
struct inode *inode3)
{
if (inode3)
mutex_unlock(&ubifs_inode(inode3)->ui_mutex);
if (inode1 != inode2)
mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
}
static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir, struct dentry *new_dentry)
{
struct ubifs_info *c = old_dir->i_sb->s_fs_info;
struct inode *old_inode = d_inode(old_dentry);
struct inode *new_inode = d_inode(new_dentry);
struct ubifs_inode *old_inode_ui = ubifs_inode(old_inode);
int err, release, sync = 0, move = (new_dir != old_dir);
int is_dir = S_ISDIR(old_inode->i_mode);
int unlink = !!new_inode;
int new_sz = CALC_DENT_SIZE(new_dentry->d_name.len);
int old_sz = CALC_DENT_SIZE(old_dentry->d_name.len);
struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1,
.dirtied_ino = 3 };
struct ubifs_budget_req ino_req = { .dirtied_ino = 1,
.dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) };
struct timespec time;
unsigned int uninitialized_var(saved_nlink);
/*
* Budget request settings: deletion direntry, new direntry, removing
* the old inode, and changing old and new parent directory inodes.
*
* However, this operation also marks the target inode as dirty and
* does not write it, so we allocate budget for the target inode
* separately.
*/
dbg_gen("dent '%pd' ino %lu in dir ino %lu to dent '%pd' in dir ino %lu",
old_dentry, old_inode->i_ino, old_dir->i_ino,
new_dentry, new_dir->i_ino);
ubifs_assert(mutex_is_locked(&old_dir->i_mutex));
ubifs_assert(mutex_is_locked(&new_dir->i_mutex));
if (unlink)
ubifs_assert(mutex_is_locked(&new_inode->i_mutex));
if (unlink && is_dir) {
err = check_dir_empty(c, new_inode);
if (err)
return err;
}
err = ubifs_budget_space(c, &req);
if (err)
return err;
err = ubifs_budget_space(c, &ino_req);
if (err) {
ubifs_release_budget(c, &req);
return err;
}
lock_3_inodes(old_dir, new_dir, new_inode);
/*
* Like most other Unix systems, set the @i_ctime for inodes on a
* rename.
*/
time = ubifs_current_time(old_dir);
old_inode->i_ctime = time;
/* We must adjust parent link count when renaming directories */
if (is_dir) {
if (move) {
/*
* @old_dir loses a link because we are moving
* @old_inode to a different directory.
*/
drop_nlink(old_dir);
/*
* @new_dir only gains a link if we are not also
* overwriting an existing directory.
*/
if (!unlink)
inc_nlink(new_dir);
} else {
/*
* @old_inode is not moving to a different directory,
* but @old_dir still loses a link if we are
* overwriting an existing directory.
*/
if (unlink)
drop_nlink(old_dir);
}
}
old_dir->i_size -= old_sz;
ubifs_inode(old_dir)->ui_size = old_dir->i_size;
old_dir->i_mtime = old_dir->i_ctime = time;
new_dir->i_mtime = new_dir->i_ctime = time;
/*
* And finally, if we unlinked a direntry which happened to have the
* same name as the moved direntry, we have to decrement @i_nlink of
* the unlinked inode and change its ctime.
*/
if (unlink) {
/*
* Directories cannot have hard-links, so if this is a
* directory, just clear @i_nlink.
*/
saved_nlink = new_inode->i_nlink;
if (is_dir)
clear_nlink(new_inode);
else
drop_nlink(new_inode);
new_inode->i_ctime = time;
} else {
new_dir->i_size += new_sz;
ubifs_inode(new_dir)->ui_size = new_dir->i_size;
}
/*
* Do not ask 'ubifs_jnl_rename()' to flush write-buffer if @old_inode
* is dirty, because this will be done later on at the end of
* 'ubifs_rename()'.
*/
if (IS_SYNC(old_inode)) {
sync = IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir);
if (unlink && IS_SYNC(new_inode))
sync = 1;
}
err = ubifs_jnl_rename(c, old_dir, old_dentry, new_dir, new_dentry,
sync);
if (err)
goto out_cancel;
unlock_3_inodes(old_dir, new_dir, new_inode);
ubifs_release_budget(c, &req);
mutex_lock(&old_inode_ui->ui_mutex);
release = old_inode_ui->dirty;
mark_inode_dirty_sync(old_inode);
mutex_unlock(&old_inode_ui->ui_mutex);
if (release)
ubifs_release_budget(c, &ino_req);
if (IS_SYNC(old_inode))
err = old_inode->i_sb->s_op->write_inode(old_inode, NULL);
return err;
out_cancel:
if (unlink) {
set_nlink(new_inode, saved_nlink);
} else {
new_dir->i_size -= new_sz;
ubifs_inode(new_dir)->ui_size = new_dir->i_size;
}
old_dir->i_size += old_sz;
ubifs_inode(old_dir)->ui_size = old_dir->i_size;
if (is_dir) {
if (move) {
inc_nlink(old_dir);
if (!unlink)
drop_nlink(new_dir);
} else {
if (unlink)
inc_nlink(old_dir);
}
}
unlock_3_inodes(old_dir, new_dir, new_inode);
ubifs_release_budget(c, &ino_req);
ubifs_release_budget(c, &req);
return err;
}
int ubifs_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat)
{
loff_t size;
struct inode *inode = d_inode(dentry);
struct ubifs_inode *ui = ubifs_inode(inode);
mutex_lock(&ui->ui_mutex);
generic_fillattr(inode, stat);
stat->blksize = UBIFS_BLOCK_SIZE;
stat->size = ui->ui_size;
/*
* Unfortunately, the 'stat()' system call was designed for block
* device based file systems, and it is not appropriate for UBIFS,
* because UBIFS does not have notion of "block". For example, it is
* difficult to tell how many block a directory takes - it actually
* takes less than 300 bytes, but we have to round it to block size,
* which introduces large mistake. This makes utilities like 'du' to
* report completely senseless numbers. This is the reason why UBIFS
* goes the same way as JFFS2 - it reports zero blocks for everything
* but regular files, which makes more sense than reporting completely
* wrong sizes.
*/
if (S_ISREG(inode->i_mode)) {
size = ui->xattr_size;
size += stat->size;
size = ALIGN(size, UBIFS_BLOCK_SIZE);
/*
* Note, user-space expects 512-byte blocks count irrespectively
* of what was reported in @stat->size.
*/
stat->blocks = size >> 9;
} else
stat->blocks = 0;
mutex_unlock(&ui->ui_mutex);
return 0;
}
const struct inode_operations ubifs_dir_inode_operations = {
.lookup = ubifs_lookup,
.create = ubifs_create,
.link = ubifs_link,
.symlink = ubifs_symlink,
.unlink = ubifs_unlink,
.mkdir = ubifs_mkdir,
.rmdir = ubifs_rmdir,
.mknod = ubifs_mknod,
.rename = ubifs_rename,
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
.setxattr = ubifs_setxattr,
.getxattr = ubifs_getxattr,
.listxattr = ubifs_listxattr,
.removexattr = ubifs_removexattr,
#ifdef CONFIG_UBIFS_ATIME_SUPPORT
.update_time = ubifs_update_time,
#endif
};
const struct file_operations ubifs_dir_operations = {
.llseek = generic_file_llseek,
.release = ubifs_dir_release,
.read = generic_read_dir,
.iterate = ubifs_readdir,
.fsync = ubifs_fsync,
.unlocked_ioctl = ubifs_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = ubifs_compat_ioctl,
#endif
};
/**
* adreno_drawctxt_detach(): detach a context from the GPU
* @context: Generic KGSL context container for the context
*
*/
int adreno_drawctxt_detach(struct kgsl_context *context)
{
struct kgsl_device *device;
struct adreno_device *adreno_dev;
struct adreno_context *drawctxt;
int ret;
if (context == NULL)
return 0;
device = context->device;
adreno_dev = ADRENO_DEVICE(device);
drawctxt = ADRENO_CONTEXT(context);
/* deactivate context */
if (adreno_dev->drawctxt_active == drawctxt)
adreno_drawctxt_switch(adreno_dev, NULL, 0);
mutex_lock(&drawctxt->mutex);
while (drawctxt->cmdqueue_head != drawctxt->cmdqueue_tail) {
struct kgsl_cmdbatch *cmdbatch =
drawctxt->cmdqueue[drawctxt->cmdqueue_head];
drawctxt->cmdqueue_head = (drawctxt->cmdqueue_head + 1) %
ADRENO_CONTEXT_CMDQUEUE_SIZE;
mutex_unlock(&drawctxt->mutex);
/*
* Don't hold the drawctxt mutex while the cmdbatch is being
* destroyed because the cmdbatch destroy takes the device
* mutex and the world falls in on itself
*/
kgsl_cmdbatch_destroy(cmdbatch);
mutex_lock(&drawctxt->mutex);
}
mutex_unlock(&drawctxt->mutex);
/*
* internal_timestamp is set in adreno_ringbuffer_addcmds,
* which holds the device mutex. The entire context destroy
* process requires the device mutex as well. But lets
* make sure we notice if the locking changes.
*/
BUG_ON(!mutex_is_locked(&device->mutex));
/* Wait for the last global timestamp to pass before continuing */
ret = adreno_drawctxt_wait_global(adreno_dev, context,
drawctxt->internal_timestamp, 10 * 1000);
/*
* If the wait for global fails then nothing after this point is likely
* to work very well - BUG_ON() so we can take advantage of the debug
* tools to figure out what the h - e - double hockey sticks happened
*/
BUG_ON(ret);
kgsl_sharedmem_writel(device, &device->memstore,
KGSL_MEMSTORE_OFFSET(context->id, soptimestamp),
drawctxt->timestamp);
kgsl_sharedmem_writel(device, &device->memstore,
KGSL_MEMSTORE_OFFSET(context->id, eoptimestamp),
drawctxt->timestamp);
kgsl_sharedmem_free(&drawctxt->gpustate);
kgsl_sharedmem_free(&drawctxt->context_gmem_shadow.gmemshadow);
if (drawctxt->ops->detach)
drawctxt->ops->detach(drawctxt);
/* wake threads waiting to submit commands from this context */
wake_up_all(&drawctxt->waiting);
wake_up_all(&drawctxt->wq);
return ret;
}
/**
* @brief@ main sleep work handling function which update the flags
* and activate and deactivate UART ,check FIFO.
*/
static void bluesleep_sleep_work(struct work_struct *work)
{
#if defined(CONFIG_SEC_MIF_UART_SWITCH)
int uart_sel = 0;
#endif
if (mutex_is_locked(&bluesleep_mutex))
BT_DBG("Wait for mutex unlock in bluesleep_sleep_work");
if (bsi->uport == NULL) {
BT_DBG("bluesleep_sleep_work - uport is null");
return;
}
if (bsi->uport->state == NULL) {
BT_DBG("bluesleep_sleep_work - bsi->uport->state is null");
return;
}
if (bsi->uport->state->port.tty == NULL) {
BT_DBG("bluesleep_sleep_work - bsi->uport->state->port.tty is null");
return;
}
mutex_lock(&bluesleep_mutex);
if (bluesleep_can_sleep()) {
/* already asleep, this is an error case */
if (test_bit(BT_ASLEEP, &flags)) {
BT_DBG("already asleep");
mutex_unlock(&bluesleep_mutex);
return;
}
if (msm_hs_tx_empty(bsi->uport)) {
if (test_bit(BT_TXDATA, &flags)) {
BT_DBG("TXDATA remained. Wait until timer expires.");
mod_timer(&tx_timer, jiffies + TX_TIMER_INTERVAL * HZ);
mutex_unlock(&bluesleep_mutex);
return;
}
#if defined(CONFIG_SEC_MIF_UART_SWITCH)
if(system_rev <= 6 /*board rev 06*/) {
uart_sel = gpio_get_value(GPIO_UART_SEL);
}
else{
uart_sel = gpio_get_value(GPIO_UART_SEL_REV07);
}
if (uart_sel ==1) {
BT_DBG("bluesleep_sleep_work GPIO_UART_SEL (%d)", uart_sel);
return;
}
#endif
BT_DBG("going to sleep...");
set_bit(BT_ASLEEP, &flags);
/*Deactivating UART */
hsuart_power(0);
/* Moved from Timer expired */
if (bsi->has_ext_wake == 1)
gpio_set_value(bsi->ext_wake, 0);
clear_bit(BT_EXT_WAKE, &flags);
/*Deactivating UART */
/* UART clk is not turned off immediately. Release
* wakelock after 500 ms.
*/
wake_lock_timeout(&bsi->wake_lock, HZ / 2);
} else {
BT_DBG("host can enter sleep but some tx remained.");
mod_timer(&tx_timer, jiffies + TX_TIMER_INTERVAL * HZ);
mutex_unlock(&bluesleep_mutex);
return;
}
} else if (!test_bit(BT_EXT_WAKE, &flags)
&& !test_bit(BT_ASLEEP, &flags)) {
BT_DBG("host_wake high and BT_EXT_WAKE & BT_ASLEEP already freed.");
mod_timer(&tx_timer, jiffies + (TX_TIMER_INTERVAL * HZ));
if (bsi->has_ext_wake == 1) {
gpio_set_value(bsi->ext_wake, 1);
}
set_bit(BT_EXT_WAKE, &flags);
} else {
bluesleep_sleep_wakeup();
}
mutex_unlock(&bluesleep_mutex);
}