C++ (Cpp) mxc_init_keypad 예제들

예제 #1

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();
	mxc_clocks_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();
	mxc_init_pmic_audio();
	mxc_gpio_init();
	mx31ads_gpio_init();
	mxc_expio_init();
	mxc_init_keypad();
	mxc_init_extuart();
	mxc_init_nor_mtd();
	mxc_init_nand_mtd();

	i2c_register_board_info(0, mxc_i2c_info, ARRAY_SIZE(mxc_i2c_info));
	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));

	mxc_init_fb();
	mxc_init_bl();
	mxc_init_ir();
	mxc_init_mmc();
	mxc_init_ide();
	mxc_init_pata();
}

예제 #2

파일: mx51_3stack.c 프로젝트: R0-Developers/YP-R0_Kernel

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();
	mxc_clocks_init();
	mxc_gpio_init();
	early_console_setup(saved_command_line);

	mxc_expio_init();
	mxc_init_enet();
	mxc_init_pata();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_keypad();
	mxc_init_nand_mtd();
	mxc_init_mmc();

#if defined(CONFIG_I2C_MXC) || defined(CONFIG_I2C_MXC_MODULE)

#ifdef CONFIG_I2C_MXC_SELECT1
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
#endif

#ifdef CONFIG_I2C_MXC_SELECT2
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));
#endif

#endif

}

예제 #3

파일: mxc30030evb.c 프로젝트: R0-Developers/YP-R0_Kernel

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();
	mxc_clocks_init();
	early_console_setup(saved_command_line);

	/* Enable 26 mhz clock on CKO1 for PMIC audio */
	mxc_init_pmic_audio();

	pm_power_off = mxc_power_off;

	mxc_gpio_init();
	mxc_init_keypad();
	mxc_init_extuart();
	mxc_init_enet();
	mxc_init_nor_mtd();
	mxc_init_nand_mtd();

	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));

	mxc_init_fb();
	mxc_init_bl();
	mxc_init_ir();
	/* Search for dsp specific parameters from kernel's command line */
	if (dsp_parse_cmdline((const char *)command_line) != 0) {
		dsp_startapp_request();
	}
}

예제 #4

파일: mx51_3stack.c 프로젝트: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	int err;

	mxc_cpu_common_init();
	mxc_gpio_init();
	mx51_3stack_io_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();

	mxc_expio_init();
	mxc_init_enet();
	mxc_init_pata();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_keypad();
	mxc_init_nand_mtd();
	mxc_init_mmc();
	mxc_init_sim();
	mxc_init_srpgconfig();
	mx51_3stack_init_mc13892();

#if defined(CONFIG_I2C_MXC) || defined(CONFIG_I2C_MXC_MODULE)

#ifdef CONFIG_I2C_MXC_SELECT1
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
#endif
#ifdef CONFIG_I2C_MXC_SELECT2
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));
#endif
#if defined(CONFIG_I2C_MXC_HS) || defined(CONFIG_I2C_MXC_HS_MODULE)
	i2c_register_board_info(3, mxc_i2c_hs_board_info,
				ARRAY_SIZE(mxc_i2c_hs_board_info));
#endif

#endif
	mxc_init_touchscreen();
	mxc_init_wm8903();
	mxc_init_sgtl5000();
	mxc_init_bluetooth();
	mxc_init_gps();

	err = mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_GPIO);
	if (err)
		printk(KERN_ERR "Error: bt reset request gpio failed!\n");
	else
	mxc_set_gpio_direction(MX51_PIN_EIM_D19, 0);
}

예제 #5

파일: mx31ads.c 프로젝트: GodFox/magx_kernel_xpixl

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();

	/* Enable 26 mhz clock on CKO1 for MC13783 audio */
	mxc_ccm_modify_reg(MXC_CCM_COSR, 0x00000fff, 0x00000208);

	mxc_gpio_init();
        mx31ads_gpio_init();
	mxc_expio_init();
	mxc_init_keypad();
	mxc_init_extuart();
	mxc_init_nor_mtd();
	mxc_init_nand_mtd();
}

예제 #6

파일: board-mx51_3ds.c 프로젝트: 15-712/linux-2.6

/*
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
					ARRAY_SIZE(mx51_3ds_pads));
	mxc_init_imx_uart();

	imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
	spi_register_board_info(mx51_3ds_spi_nor_device,
				ARRAY_SIZE(mx51_3ds_spi_nor_device));

	if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
		printk(KERN_WARNING "Init of the debugboard failed, all "
				    "devices on the board are unusable.\n");

	imx51_add_sdhci_esdhc_imx(0, NULL);
	mxc_init_keypad();
}

예제 #7

파일: mx3_3stack.c 프로젝트: vasubabu/kernel

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	/* config CS5 for debug board */
	mxc_request_iomux(MX31_PIN_CS5, OUTPUTCONFIG_FUNC, INPUTCONFIG_FUNC);

	mxc_cpu_common_init();
	mxc_register_gpios();
	mxc_init_devices();

	/*Pull down MX31_PIN_USB_BYP to reset USB3317 */
	mxc_request_iomux(MX31_PIN_USB_BYP, OUTPUTCONFIG_GPIO,
			  INPUTCONFIG_NONE);
	gpio_request(IOMUX_TO_GPIO(MX31_PIN_USB_BYP), "usb_byp");
	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_USB_BYP), 0);
	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_USB_BYP), 0);
	mxc_free_iomux(MX31_PIN_USB_BYP, OUTPUTCONFIG_GPIO, INPUTCONFIG_NONE);

	/* Reset BT/WiFi chip */
	mxc_request_iomux(MX31_PIN_DCD_DCE1, OUTPUTCONFIG_GPIO,
			  INPUTCONFIG_NONE);
	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1), "dcd_dce1");
	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1), 0);
	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1), 0);

	mxc_init_pmic_audio();
	mxc_expio_init();
	mxc_init_keypad();
	mxc_init_enet();
	mxc_init_nand_mtd();
	mxc_init_ch7024();
	mx3_3stack_init_mc13783();

	i2c_register_board_info(0, mxc_i2c_board_info,
				ARRAY_SIZE(mxc_i2c_board_info));
	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));

	mxc_init_fb();
	mxc_init_bl();
	mxc_init_mmc();
	mxc_init_ide();
	mxc_init_pata();
	mxc_init_bluetooth();
	mxc_init_gps();
}

예제 #8

파일: mx3_3stack.c 프로젝트: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	/* config CS5 for debug board */
	mxc_request_iomux(MX31_PIN_CS5, OUTPUTCONFIG_FUNC, INPUTCONFIG_FUNC);

	mxc_cpu_common_init();
	mxc_gpio_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();

	/*Pull down MX31_PIN_USB_BYP to reset USB3317 */
	mxc_request_iomux(MX31_PIN_USB_BYP, OUTPUTCONFIG_GPIO,
			  INPUTCONFIG_NONE);
	mxc_set_gpio_direction(MX31_PIN_USB_BYP, 0);
	mxc_set_gpio_dataout(MX31_PIN_USB_BYP, 0);
	mxc_free_iomux(MX31_PIN_USB_BYP, OUTPUTCONFIG_GPIO, INPUTCONFIG_NONE);

	/* Reset BT/WiFi chip */
	mxc_request_iomux(MX31_PIN_DCD_DCE1, OUTPUTCONFIG_GPIO,
			  INPUTCONFIG_NONE);
	mxc_set_gpio_direction(MX31_PIN_DCD_DCE1, 0);
	mxc_set_gpio_dataout(MX31_PIN_DCD_DCE1, 0);

	mxc_init_pmic_audio();
	mxc_expio_init();
	mxc_init_keypad();
	mxc_init_enet();
	mxc_init_nand_mtd();
	mxc_init_ch7024();
	mx3_3stack_init_mc13783();

	i2c_register_board_info(0, mxc_i2c_board_info,
				ARRAY_SIZE(mxc_i2c_board_info));
	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));

	mxc_init_fb();
	mxc_init_bl();
	mxc_init_mmc();
	mxc_init_ide();
	mxc_init_pata();
	mxc_init_bluetooth();
	mxc_init_gps();
}

예제 #9

파일: mx25_3stack.c 프로젝트: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	pr_info("AIPS1 VA base: 0x%x\n", IO_ADDRESS(AIPS1_BASE_ADDR));
	mxc_cpu_common_init();
	mxc_gpio_init();
	mx25_3stack_gpio_init();
	early_console_setup(saved_command_line);
	mxc_init_keypad();
#ifdef CONFIG_I2C
	i2c_register_board_info(0, mxc_i2c_board_info,
				ARRAY_SIZE(mxc_i2c_board_info));
#endif
	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));
	mx25_3stack_init_mc34704();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_nand_mtd();
	mxc_init_sgtl5000();
	mxc_init_mmc();
}