C++ (Cpp) mxc_init_sgtl5000 예제들

예제 #1

파일: mx35_3stack.c 프로젝트: vasubabu/kernel

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();

	mxc_register_gpios();
	mxc_init_devices();
	if (!board_is_rev(BOARD_REV_2))
		mx35_3stack_fixup_for_board_v1();
	mx35_3stack_gpio_init();
	mxc_init_enet();
	mxc_init_nor_mtd();
	mxc_init_nand_mtd();

	mx35_3stack_init_mc13892();
	mx35_3stack_init_mc9s08dz60();
	mxc_init_lcd();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_sgtl5000();
	mxc_init_ak4647();

	i2c_register_board_info(0, mxc_i2c_board_info,
				ARRAY_SIZE(mxc_i2c_board_info));

	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));
	mxc_init_mmc();
	mxc_init_pata();
	mxc_init_bluetooth();
	mxc_init_gps();
	mxc_init_mlb();
	mxc_init_fec();
}

예제 #2

파일: mx51_3stack.c 프로젝트: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	int err;

	mxc_cpu_common_init();
	mxc_gpio_init();
	mx51_3stack_io_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();

	mxc_expio_init();
	mxc_init_enet();
	mxc_init_pata();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_keypad();
	mxc_init_nand_mtd();
	mxc_init_mmc();
	mxc_init_sim();
	mxc_init_srpgconfig();
	mx51_3stack_init_mc13892();

#if defined(CONFIG_I2C_MXC) || defined(CONFIG_I2C_MXC_MODULE)

#ifdef CONFIG_I2C_MXC_SELECT1
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
#endif
#ifdef CONFIG_I2C_MXC_SELECT2
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));
#endif
#if defined(CONFIG_I2C_MXC_HS) || defined(CONFIG_I2C_MXC_HS_MODULE)
	i2c_register_board_info(3, mxc_i2c_hs_board_info,
				ARRAY_SIZE(mxc_i2c_hs_board_info));
#endif

#endif
	mxc_init_touchscreen();
	mxc_init_wm8903();
	mxc_init_sgtl5000();
	mxc_init_bluetooth();
	mxc_init_gps();

	err = mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_GPIO);
	if (err)
		printk(KERN_ERR "Error: bt reset request gpio failed!\n");
	else
	mxc_set_gpio_direction(MX51_PIN_EIM_D19, 0);
}

예제 #3

파일: mx25_3stack.c 프로젝트: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	pr_info("AIPS1 VA base: 0x%x\n", IO_ADDRESS(AIPS1_BASE_ADDR));
	mxc_cpu_common_init();
	mxc_gpio_init();
	mx25_3stack_gpio_init();
	early_console_setup(saved_command_line);
	mxc_init_keypad();
#ifdef CONFIG_I2C
	i2c_register_board_info(0, mxc_i2c_board_info,
				ARRAY_SIZE(mxc_i2c_board_info));
#endif
	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));
	mx25_3stack_init_mc34704();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_nand_mtd();
	mxc_init_sgtl5000();
	mxc_init_mmc();
}

예제 #4

파일: mx37_3stack.c 프로젝트: traveller42/linux-2.6.28.mx233-falconwing

/*!
 * Board specific initialization.
 */
static void __init mxc_board_init(void)
{
	mxc_cpu_common_init();
	mxc_gpio_init();
	early_console_setup(saved_command_line);
	mxc_init_devices();
	if (!board_is_mx37(BOARD_REV_2))
		mx37_3stack_fixup_for_board_v1();
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));

	spi_register_board_info(mxc_spi_board_info,
				ARRAY_SIZE(mxc_spi_board_info));
	mxc_init_nand_mtd();
	mxc_init_mmc();
	mxc_init_pata();
	mxc_init_fb();
	mxc_init_bl();
	mxc_init_bluetooth();
	mxc_init_gps();
	mxc_init_sgtl5000();
}