예제 #1
0
파일: nbio.c 프로젝트: snktagarwal/openafs
int nb_readx(int handle, int offset, int size, int ret_size)
{
    int     i;
    ssize_t ret;
    char    FileName[128];
    char    temp[512];
    DWORD   gle;

    sprintf(FileName, "Thread_%05d.log", ProcessNumber);

    if ((i = FindHandle(handle)) == -1)
        return(-1);

    StartFirstTimer();
    ret = nb_read(ftable[i].fd, IoBuffer, offset, size);
    gle = GetLastError();
    if ((ret != size) && (ret != ret_size))
    {
        EndFirstTimer(CMD_READX, 0);
        LeaveThread(0, "", CMD_READX);
        if (ret == 0)
            sprintf(temp, "File: read failed on index=%d, offset=%d ReadSize=%d ActualRead=%d handle=%p GLE(0x%x)\n",
                    handle, offset, size, ret, ftable[i].fd, gle);
        if (ret == -1)
            sprintf(temp, "File: %s. On read, cannot set file pointer GLE(0x%x)\n", ftable[i].name, gle);
        if (verbose)
            printf("%s", temp);
        nb_close(handle);
        LogMessage(ProcessNumber, HostName, FileName, temp, LogID);
        return(-1);
    }
    EndFirstTimer(CMD_READX, 1);
    ftable[i].reads++;
    return(0);
}
예제 #2
0
파일: remove.c 프로젝트: bitfixer/bitfixer
int remove(char *name)
{
	/*  Open the directory device on stream 15 */
	nb_open( OUTP, 15, DEV_SDISCIO, 0, "" );
	
	/* send 'ERASE' command (0) to directory device */
	nb_puts( 15, "0" );
	/* pass file name or file mask */
	nb_puts( 15, name );
	/* <CR> */
	nb_puts( 15, "\n" );
	
	nb_close( 15 );
	return (0);
}
예제 #3
0
파일: nbio.c 프로젝트: snktagarwal/openafs
int nb_writex(int handle, int offset, int size, int ret_size)
{
    int     i;
    ssize_t status;
    char    FileName[128];
    char    temp[512];
    unsigned char magic = (unsigned char)getpid();

    sprintf(FileName, "Thread_%05d.log", ProcessNumber);

    if (IoBuffer[0] != magic ||
        IoBuffer[1] != magic ||
        IoBuffer[2] != magic ||
        IoBuffer[3] != magic)
        memset(IoBuffer, magic, BufferSize);

    if ((i = FindHandle(handle)) == -1)
        return(-1);
    StartFirstTimer();
    status = nb_write(ftable[i].fd, IoBuffer, offset, size);
    if (status != ret_size) 
    {
        EndFirstTimer(CMD_WRITEX, 0);
		LeaveThread(0, "", CMD_WRITEX);
        if (status == 0)
            sprintf(temp, "File: %s. wrote %d bytes, got %d bytes\n", ftable[i].name, size, status);
        if (status == -1)
            sprintf(temp, "File: %s. On write, cannot set file pointer\n", ftable[i].name);
        if (verbose)
            printf("%s", temp);
        nb_close(handle);
        if (verbose)
            printf("%s", temp);
        LogMessage(ProcessNumber, HostName, FileName, temp, LogID);
        return(-1);
	}
    EndFirstTimer(CMD_WRITEX, 1);

    ftable[i].writes++;
    return(0);
}
예제 #4
0
파일: nbench.c 프로젝트: gojdic/samba
/* run a test that simulates an approximate netbench client load */
static bool run_netbench(struct torture_context *tctx, struct smbcli_state *cli, int client)
{
	int torture_nprocs = torture_setting_int(tctx, "nprocs", 4);
	int i;
	char line[1024];
	char *cname;
	FILE *f;
	bool correct = true;
	double target_rate = torture_setting_double(tctx, "targetrate", 0);	
	int n;

	if (target_rate != 0 && client == 0) {
		printf("Targetting %.4f MByte/sec\n", target_rate);
	}

	nb_setup(cli, client);

	if (torture_nprocs == 1) {
		if (!read_only) {
			NB_RETRY(torture_setup_dir(cli, "\\clients"));
		}
	}

	asprintf(&cname, "client%d", client+1);

	f = fopen(loadfile, "r");

	if (!f) {
		perror(loadfile);
		return false;
	}

again:
	nbio_time_reset();

	while (fgets(line, sizeof(line)-1, f)) {
		NTSTATUS status;
		const char **params0, **params;

		nbench_line_count++;

		line[strlen(line)-1] = 0;

		all_string_sub(line,"client1", cname, sizeof(line));
		
		params = params0 = str_list_make_shell(NULL, line, " ");
		i = str_list_length(params);

		if (i > 0 && isdigit(params[0][0])) {
			double targett = strtod(params[0], NULL);
			if (target_rate != 0) {
				nbio_target_rate(target_rate);
			} else {
				nbio_time_delay(targett);
			}
			params++;
			i--;
		} else if (target_rate != 0) {
			nbio_target_rate(target_rate);
		}

		if (i < 2 || params[0][0] == '#') continue;

		if (!strncmp(params[0],"SMB", 3)) {
			printf("ERROR: You are using a dbench 1 load file\n");
			nb_exit(1);
		}

		if (strncmp(params[i-1], "NT_STATUS_", 10) != 0 &&
		    strncmp(params[i-1], "0x", 2) != 0) {
			printf("Badly formed status at line %d\n", nbench_line_count);
			talloc_free(params);
			continue;
		}

		/* accept numeric or string status codes */
		if (strncmp(params[i-1], "0x", 2) == 0) {
			status = NT_STATUS(strtoul(params[i-1], NULL, 16));
		} else {
			status = nt_status_string_to_code(params[i-1]);
		}

		DEBUG(9,("run_netbench(%d): %s %s\n", client, params[0], params[1]));

		if (!strcmp(params[0],"NTCreateX")) {
			NB_RETRY(nb_createx(params[1], ival(params[2]), ival(params[3]), 
					    ival(params[4]), status));
		} else if (!strcmp(params[0],"Close")) {
			NB_RETRY(nb_close(ival(params[1]), status));
		} else if (!read_only && !strcmp(params[0],"Rename")) {
			NB_RETRY(nb_rename(params[1], params[2], status, n>0));
		} else if (!read_only && !strcmp(params[0],"Unlink")) {
			NB_RETRY(nb_unlink(params[1], ival(params[2]), status, n>0));
		} else if (!read_only && !strcmp(params[0],"Deltree")) {
			NB_RETRY(nb_deltree(params[1], n>0));
		} else if (!read_only && !strcmp(params[0],"Rmdir")) {
			NB_RETRY(nb_rmdir(params[1], status, n>0));
		} else if (!read_only && !strcmp(params[0],"Mkdir")) {
			NB_RETRY(nb_mkdir(params[1], status, n>0));
		} else if (!strcmp(params[0],"QUERY_PATH_INFORMATION")) {
			NB_RETRY(nb_qpathinfo(params[1], ival(params[2]), status));
		} else if (!strcmp(params[0],"QUERY_FILE_INFORMATION")) {
			NB_RETRY(nb_qfileinfo(ival(params[1]), ival(params[2]), status));
		} else if (!strcmp(params[0],"QUERY_FS_INFORMATION")) {
			NB_RETRY(nb_qfsinfo(ival(params[1]), status));
		} else if (!read_only && !strcmp(params[0],"SET_FILE_INFORMATION")) {
			NB_RETRY(nb_sfileinfo(ival(params[1]), ival(params[2]), status));
		} else if (!strcmp(params[0],"FIND_FIRST")) {
			NB_RETRY(nb_findfirst(params[1], ival(params[2]), 
					      ival(params[3]), ival(params[4]), status));
		} else if (!read_only && !strcmp(params[0],"WriteX")) {
			NB_RETRY(nb_writex(ival(params[1]), 
					   ival(params[2]), ival(params[3]), ival(params[4]),
					   status));
		} else if (!read_only && !strcmp(params[0],"Write")) {
			NB_RETRY(nb_write(ival(params[1]), 
					  ival(params[2]), ival(params[3]), ival(params[4]),
					  status));
		} else if (!strcmp(params[0],"LockX")) {
			NB_RETRY(nb_lockx(ival(params[1]), 
					  ival(params[2]), ival(params[3]), status));
		} else if (!strcmp(params[0],"UnlockX")) {
			NB_RETRY(nb_unlockx(ival(params[1]), 
					    ival(params[2]), ival(params[3]), status));
		} else if (!strcmp(params[0],"ReadX")) {
			NB_RETRY(nb_readx(ival(params[1]), 
					  ival(params[2]), ival(params[3]), ival(params[4]),
					  status));
		} else if (!strcmp(params[0],"Flush")) {
			NB_RETRY(nb_flush(ival(params[1]), status));
		} else if (!strcmp(params[0],"Sleep")) {
			nb_sleep(ival(params[1]), status);
		} else {
			printf("[%d] Unknown operation %s\n", nbench_line_count, params[0]);
		}

		if (n > nb_max_retries) {
			printf("Maximum reconnect retries reached for op '%s'\n", params[0]);
			nb_exit(1);
		}

		talloc_free(params0);
		
		if (nb_tick()) goto done;
	}

	rewind(f);
	goto again;

done:
	fclose(f);

	if (!read_only && torture_nprocs == 1) {
		smbcli_deltree(cli->tree, "\\clients");
	}
	if (!torture_close_connection(cli)) {
		correct = false;
	}
	
	return correct;
}