// We return the UserSettings here because we have to make changes to the
// configuration and the location of the file may change between releases.
UserSettingsPointer Upgrade::versionUpgrade(const QString& settingsPath) {
/* Pre-1.7.0:
*
* Since we didn't store version numbers in the config file prior to 1.7.0,
* we check to see if the user is upgrading if his config files are in the old location,
* since we moved them in 1.7.0. This code takes care of moving them.
*/
QDir oldLocation = QDir(QDir::homePath());
#ifdef __WINDOWS__
QFileInfo* pre170Config = new QFileInfo(oldLocation.filePath("mixxx.cfg"));
#else
QFileInfo* pre170Config = new QFileInfo(oldLocation.filePath(".mixxx.cfg"));
#endif
if (pre170Config->exists()) {
// Move the files to their new location
QDir newLocation = QDir(settingsPath);
if (!newLocation.exists()) {
qDebug() << "Creating new settings directory" << newLocation.absolutePath();
newLocation.mkpath(".");
}
QString errorText = "Error moving your %1 file %2 to the new location %3: \n";
#ifdef __WINDOWS__
QString oldFilePath = oldLocation.filePath("mixxxtrack.xml");
#else
QString oldFilePath = oldLocation.filePath(".mixxxtrack.xml");
#endif
QString newFilePath = newLocation.filePath("mixxxtrack.xml");
QFile* oldFile = new QFile(oldFilePath);
if (oldFile->exists()) {
if (oldFile->copy(newFilePath)) {
oldFile->remove();
}
else {
if (oldFile->error()==14) qDebug() << errorText.arg("library", oldFilePath, newFilePath) << "The destination file already exists.";
else qDebug() << errorText.arg("library", oldFilePath, newFilePath) << "Error #" << oldFile->error();
}
}
delete oldFile;
#ifdef __WINDOWS__
oldFilePath = oldLocation.filePath("mixxxbpmschemes.xml");
#else
oldFilePath = oldLocation.filePath(".mixxxbpmscheme.xml");
#endif
newFilePath = newLocation.filePath("mixxxbpmscheme.xml");
oldFile = new QFile(oldFilePath);
if (oldFile->exists()) {
if (oldFile->copy(newFilePath))
oldFile->remove();
else {
if (oldFile->error()==14) qDebug() << errorText.arg("settings", oldFilePath, newFilePath) << "The destination file already exists.";
else qDebug() << errorText.arg("settings", oldFilePath, newFilePath) << "Error #" << oldFile->error();
}
}
delete oldFile;
#ifdef __WINDOWS__
oldFilePath = oldLocation.filePath("MixxxMIDIBindings.xml");
#else
oldFilePath = oldLocation.filePath(".MixxxMIDIBindings.xml");
#endif
newFilePath = newLocation.filePath("MixxxMIDIBindings.xml");
oldFile = new QFile(oldFilePath);
if (oldFile->exists()) {
qWarning() << "The MIDI mapping file format has changed in this version of Mixxx. You will need to reconfigure your MIDI controller. See the Wiki for full details on the new format.";
if (oldFile->copy(newFilePath))
oldFile->remove();
else {
if (oldFile->error()==14) qDebug() << errorText.arg("MIDI mapping", oldFilePath, newFilePath) << "The destination file already exists.";
else qDebug() << errorText.arg("MIDI mapping", oldFilePath, newFilePath) << "Error #" << oldFile->error();
}
}
// Tidy up
delete oldFile;
#ifdef __WINDOWS__
QFile::remove(oldLocation.filePath("MixxxMIDIDevice.xml")); // Obsolete file, so just delete it
#else
QFile::remove(oldLocation.filePath(".MixxxMIDIDevice.xml")); // Obsolete file, so just delete it
#endif
#ifdef __WINDOWS__
oldFilePath = oldLocation.filePath("mixxx.cfg");
#else
oldFilePath = oldLocation.filePath(".mixxx.cfg");
#endif
newFilePath = newLocation.filePath(SETTINGS_FILE);
oldFile = new QFile(oldFilePath);
if (oldFile->copy(newFilePath))
oldFile->remove();
else {
if (oldFile->error()==14) qDebug() << errorText.arg("configuration", oldFilePath, newFilePath) << "The destination file already exists.";
else qDebug() << errorText.arg("configuration", oldFilePath, newFilePath) << "Error #" << oldFile->error();
}
delete oldFile;
}
// Tidy up
delete pre170Config;
// End pre-1.7.0 code
/***************************************************************************
* Post-1.7.0 upgrade code
*
* Add entries to the IF ladder below if anything needs to change from the
* previous to the current version. This allows for incremental upgrades
* in case a user upgrades from a few versions prior.
****************************************************************************/
// Read the config file from home directory
UserSettingsPointer config(new ConfigObject<ConfigValue>(
QDir(settingsPath).filePath(SETTINGS_FILE)));
QString configVersion = config->getValueString(ConfigKey("[Config]","Version"));
if (configVersion.isEmpty()) {
#ifdef __APPLE__
qDebug() << "Config version is empty, trying to read pre-1.9.0 config";
// Try to read the config from the pre-1.9.0 final directory on OS X (we moved it in 1.9.0 final)
QScopedPointer<QFile> oldConfigFile(new QFile(QDir::homePath().append("/").append(".mixxx/mixxx.cfg")));
if (oldConfigFile->exists() && ! CmdlineArgs::Instance().getSettingsPathSet()) {
qDebug() << "Found pre-1.9.0 config for OS X";
// Note: We changed SETTINGS_PATH in 1.9.0 final on OS X so it must be hardcoded to ".mixxx" here for legacy.
config = UserSettingsPointer(new ConfigObject<ConfigValue>(
QDir::homePath().append("/.mixxx/mixxx.cfg")));
// Just to be sure all files like logs and soundconfig go with mixxx.cfg
// TODO(XXX) Trailing slash not needed anymore as we switches from String::append
// to QDir::filePath elsewhere in the code. This is candidate for removal.
CmdlineArgs::Instance().setSettingsPath(QDir::homePath().append("/.mixxx/"));
configVersion = config->getValueString(ConfigKey("[Config]","Version"));
}
else {
#elif __WINDOWS__
qDebug() << "Config version is empty, trying to read pre-1.12.0 config";
// Try to read the config from the pre-1.12.0 final directory on Windows (we moved it in 1.12.0 final)
QScopedPointer<QFile> oldConfigFile(new QFile(QDir::homePath().append("/Local Settings/Application Data/Mixxx/mixxx.cfg")));
if (oldConfigFile->exists() && ! CmdlineArgs::Instance().getSettingsPathSet()) {
qDebug() << "Found pre-1.12.0 config for Windows";
// Note: We changed SETTINGS_PATH in 1.12.0 final on Windows so it must be hardcoded to "Local Settings/Application Data/Mixxx/" here for legacy.
config = UserSettingsPointer(new ConfigObject<ConfigValue>(
QDir::homePath().append("/Local Settings/Application Data/Mixxx/mixxx.cfg")));
// Just to be sure all files like logs and soundconfig go with mixxx.cfg
// TODO(XXX) Trailing slash not needed anymore as we switches from String::append
// to QDir::filePath elsewhere in the code. This is candidate for removal.
CmdlineArgs::Instance().setSettingsPath(QDir::homePath().append("/Local Settings/Application Data/Mixxx/"));
configVersion = config->getValueString(ConfigKey("[Config]","Version"));
}
else {
#endif
// This must have been the first run... right? :)
qDebug() << "No version number in configuration file. Setting to" << MIXXX_VERSION;
config->set(ConfigKey("[Config]","Version"), ConfigValue(MIXXX_VERSION));
m_bFirstRun = true;
return config;
#ifdef __APPLE__
}
#elif __WINDOWS__
}
#endif
}
// If it's already current, stop here
if (configVersion == MIXXX_VERSION) {
qDebug() << "Configuration file is at the current version" << MIXXX_VERSION;
return config;
}
// Allows for incremental upgrades in case someone upgrades from a few versions prior
// (I wish we could do a switch on a QString.)
/*
// Examples, since we didn't store the version number prior to v1.7.0
if (configVersion.startsWith("1.6.0")) {
qDebug() << "Upgrading from v1.6.0 to 1.6.1...";
// Upgrade tasks go here
configVersion = "1.6.1";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.6.1"));
}
if (configVersion.startsWith("1.6.1")) {
qDebug() << "Upgrading from v1.6.1 to 1.7.0...";
// Upgrade tasks go here
configVersion = "1.7.0";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.7.0"));
}
*/
// We use the following blocks to detect if this is the first time
// you've run the latest version of Mixxx. This lets us show
// the promo tracks stats agreement stuff for all users that are
// upgrading Mixxx.
if (configVersion.startsWith("1.7")) {
qDebug() << "Upgrading from v1.7.x...";
// Upgrade tasks go here
// Nothing to change, really
configVersion = "1.8.0";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.8.0"));
}
if (configVersion.startsWith("1.8.0~beta1") ||
configVersion.startsWith("1.8.0~beta2")) {
qDebug() << "Upgrading from v1.8.0~beta...";
// Upgrade tasks go here
configVersion = "1.8.0";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.8.0"));
}
if (configVersion.startsWith("1.8") || configVersion.startsWith("1.9.0beta1")) {
qDebug() << "Upgrading from" << configVersion << "...";
// Upgrade tasks go here
#ifdef __APPLE__
QString OSXLocation180 = QDir::homePath().append("/").append(".mixxx");
QString OSXLocation190 = settingsPath;
QDir newOSXDir(OSXLocation190);
newOSXDir.mkpath(OSXLocation190);
QList<QPair<QString, QString> > dirsToMove;
dirsToMove.push_back(QPair<QString, QString>(OSXLocation180, OSXLocation190));
dirsToMove.push_back(QPair<QString, QString>(OSXLocation180 + "/midi", OSXLocation190 + "midi"));
dirsToMove.push_back(QPair<QString, QString>(OSXLocation180 + "/presets", OSXLocation190 + "presets"));
QListIterator<QPair<QString, QString> > dirIt(dirsToMove);
QPair<QString, QString> curPair;
while (dirIt.hasNext())
{
curPair = dirIt.next();
qDebug() << "Moving" << curPair.first << "to" << curPair.second;
QDir oldSubDir(curPair.first);
QDir newSubDir(curPair.second);
newSubDir.mkpath(curPair.second); // Create the new destination directory
QStringList contents = oldSubDir.entryList(QDir::Files | QDir::NoDotAndDotDot);
QStringListIterator it(contents);
QString cur;
// Iterate over all the files in the source directory and copy them to the dest dir.
while (it.hasNext())
{
cur = it.next();
QString src = curPair.first + "/" + cur;
QString dest = curPair.second + "/" + cur;
qDebug() << "Copying" << src << "to" << dest;
if (!QFile::copy(src, dest))
{
qDebug() << "Failed to move file during upgrade.";
}
}
// Rename the old directory.
newOSXDir.rename(OSXLocation180, OSXLocation180 + "-1.8");
}
// Reload the configuration file from the new location.
// (We want to make sure we save to the new location...)
config = UserSettingsPointer(new ConfigObject<ConfigValue>(
QDir(settingsPath).filePath(SETTINGS_FILE)));
#endif
configVersion = "1.9.0";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.9.0"));
}
if (configVersion.startsWith("1.9") || configVersion.startsWith("1.10")) {
qDebug() << "Upgrading from v1.9.x/1.10.x...";
bool successful = true;
qDebug() << "Copying midi/ to controllers/";
QString midiPath = legacyUserPresetsPath(config);
QString controllerPath = userPresetsPath(config);
QDir oldDir(midiPath);
QDir newDir(controllerPath);
newDir.mkpath(controllerPath); // create the new directory
QStringList contents = oldDir.entryList(QDir::Files | QDir::NoDotAndDotDot);
QStringListIterator it(contents);
QString cur;
// Iterate over all the files in the source directory and copy them to the dest dir.
while (it.hasNext()) {
cur = it.next();
if (newDir.exists(cur)) {
qDebug() << cur << "already exists in"
<< controllerPath << "Skipping.";
continue;
}
QString src = oldDir.absoluteFilePath(cur);
QString dest = newDir.absoluteFilePath(cur);
qDebug() << "Copying" << src << "to" << dest;
if (!QFile::copy(src, dest)) {
qDebug() << "Failed to copy file during upgrade.";
successful = false;
}
}
bool reanalyze_choice = askReanalyzeBeats();
BeatDetectionSettings bpmSettings(config);
bpmSettings.setReanalyzeWhenSettingsChange(reanalyze_choice);
if (successful) {
qDebug() << "Upgrade Successful";
configVersion = "1.11.0";
config->set(ConfigKey("[Config]","Version"),
ConfigValue(configVersion));
} else {
qDebug() << "Upgrade Failed";
}
}
if (configVersion.startsWith("1.11")) {
qDebug() << "Upgrading from v1.11.x...";
bool successful = false;
{
MixxxDb mixxxDb(config);
const mixxx::DbConnectionPooler dbConnectionPooler(
mixxxDb.connectionPool());
if (dbConnectionPooler.isPooling()) {
QSqlDatabase dbConnection = mixxx::DbConnectionPooled(mixxxDb.connectionPool());
DEBUG_ASSERT(dbConnection.isOpen());
if (MixxxDb::initDatabaseSchema(dbConnection)) {
TrackCollection tc(config);
tc.connectDatabase(dbConnection);
// upgrade to the multi library folder settings
QString currentFolder = config->getValueString(PREF_LEGACY_LIBRARY_DIR);
// to migrate the DB just add the current directory to the new
// directories table
// NOTE(rryan): We don't have to ask for sandbox permission to this
// directory because the normal startup integrity check in Library will
// notice if we don't have permission and ask for access. Also, the
// Sandbox isn't setup yet at this point in startup because it relies on
// the config settings path and this function is what loads the config
// so it's not ready yet.
successful = tc.getDirectoryDAO().addDirectory(currentFolder);
tc.disconnectDatabase();
}
}
}
// ask for library rescan to activate cover art. We can later ask for
// this variable when the library scanner is constructed.
m_bRescanLibrary = askReScanLibrary();
// Versions of mixxx until 1.11 had a hack that multiplied gain by 1/2,
// which was compensation for another hack that set replaygain to a
// default of 6. We've now removed all of the hacks, so subtracting
// 6 from everyone's replay gain should keep things consistent for
// all users.
int oldReplayGain = config->getValue(
ConfigKey("[ReplayGain]", "InitialReplayGainBoost"), 6);
int newReplayGain = math_max(-6, oldReplayGain - 6);
config->set(ConfigKey("[ReplayGain]", "InitialReplayGainBoost"),
ConfigValue(newReplayGain));
// if everything until here worked fine we can mark the configuration as
// updated
if (successful) {
configVersion = MIXXX_VERSION;
config->set(ConfigKey("[Config]","Version"), ConfigValue(MIXXX_VERSION));
}
else {
qDebug() << "Upgrade failed!\n";
}
}
if (configVersion.startsWith("1.12") ||
configVersion.startsWith("2.0") ||
configVersion.startsWith("2.1.0")) {
// No special upgrade required, just update the value.
configVersion = MIXXX_VERSION;
config->set(ConfigKey("[Config]","Version"), ConfigValue(MIXXX_VERSION));
}
if (configVersion == MIXXX_VERSION) qDebug() << "Configuration file is now at the current version" << MIXXX_VERSION;
else {
qWarning() << "Configuration file is at version" << configVersion
<< "instead of the current" << MIXXX_VERSION;
}
return config;
}
// We return the ConfigObject here because we have to make changes to the
// configuration and the location of the file may change between releases.
ConfigObject<ConfigValue>* Upgrade::versionUpgrade(const QString& settingsPath) {
/* Pre-1.7.0:
*
* Since we didn't store version numbers in the config file prior to 1.7.0,
* we check to see if the user is upgrading if his config files are in the old location,
* since we moved them in 1.7.0. This code takes care of moving them.
*/
QString oldLocation = QDir::homePath().append("/%1");
#ifdef __WINDOWS__
QFileInfo* pre170Config = new QFileInfo(oldLocation.arg("mixxx.cfg"));
#else
QFileInfo* pre170Config = new QFileInfo(oldLocation.arg(".mixxx.cfg"));
#endif
if (pre170Config->exists()) {
// Move the files to their new location
QString newLocation = settingsPath;
if (!QDir(newLocation).exists()) {
qDebug() << "Creating new settings directory" << newLocation;
QDir().mkpath(newLocation);
}
newLocation.append("%1");
QString errorText = "Error moving your %1 file %2 to the new location %3: \n";
#ifdef __WINDOWS__
QString oldFilePath = oldLocation.arg("mixxxtrack.xml");
#else
QString oldFilePath = oldLocation.arg(".mixxxtrack.xml");
#endif
QString newFilePath = newLocation.arg("mixxxtrack.xml");
QFile* oldFile = new QFile(oldFilePath);
if (oldFile->exists()) {
if (oldFile->copy(newFilePath)) {
oldFile->remove();
m_bUpgraded = true;
}
else {
if (oldFile->error()==14) qDebug() << errorText.arg("library", oldFilePath, newFilePath) << "The destination file already exists.";
else qDebug() << errorText.arg("library", oldFilePath, newFilePath) << "Error #" << oldFile->error();
}
}
delete oldFile;
#ifdef __WINDOWS__
oldFilePath = oldLocation.arg("mixxxbpmschemes.xml");
#else
oldFilePath = oldLocation.arg(".mixxxbpmscheme.xml");
#endif
newFilePath = newLocation.arg("mixxxbpmscheme.xml");
oldFile = new QFile(oldFilePath);
if (oldFile->exists()) {
if (oldFile->copy(newFilePath))
oldFile->remove();
else {
if (oldFile->error()==14) qDebug() << errorText.arg("settings", oldFilePath, newFilePath) << "The destination file already exists.";
else qDebug() << errorText.arg("settings", oldFilePath, newFilePath) << "Error #" << oldFile->error();
}
}
delete oldFile;
#ifdef __WINDOWS__
oldFilePath = oldLocation.arg("MixxxMIDIBindings.xml");
#else
oldFilePath = oldLocation.arg(".MixxxMIDIBindings.xml");
#endif
newFilePath = newLocation.arg("MixxxMIDIBindings.xml");
oldFile = new QFile(oldFilePath);
if (oldFile->exists()) {
qWarning() << "The MIDI mapping file format has changed in this version of Mixxx. You will need to reconfigure your MIDI controller. See the Wiki for full details on the new format.";
if (oldFile->copy(newFilePath))
oldFile->remove();
else {
if (oldFile->error()==14) qDebug() << errorText.arg("MIDI mapping", oldFilePath, newFilePath) << "The destination file already exists.";
else qDebug() << errorText.arg("MIDI mapping", oldFilePath, newFilePath) << "Error #" << oldFile->error();
}
}
// Tidy up
delete oldFile;
QFile::remove(oldLocation.arg(".MixxxMIDIDevice.xml")); // Obsolete file, so just delete it
#ifdef __WINDOWS__
oldFilePath = oldLocation.arg("mixxx.cfg");
#else
oldFilePath = oldLocation.arg(".mixxx.cfg");
#endif
newFilePath = newLocation.arg(SETTINGS_FILE);
oldFile = new QFile(oldFilePath);
if (oldFile->copy(newFilePath))
oldFile->remove();
else {
if (oldFile->error()==14) qDebug() << errorText.arg("configuration", oldFilePath, newFilePath) << "The destination file already exists.";
else qDebug() << errorText.arg("configuration", oldFilePath, newFilePath) << "Error #" << oldFile->error();
}
delete oldFile;
}
// Tidy up
delete pre170Config;
// End pre-1.7.0 code
/***************************************************************************
* Post-1.7.0 upgrade code
*
* Add entries to the IF ladder below if anything needs to change from the
* previous to the current version. This allows for incremental upgrades
* incase a user upgrades from a few versions prior.
****************************************************************************/
// Read the config file from home directory
ConfigObject<ConfigValue> *config = new ConfigObject<ConfigValue>(settingsPath + SETTINGS_FILE);
QString configVersion = config->getValueString(ConfigKey("[Config]","Version"));
if (configVersion.isEmpty()) {
#ifdef __APPLE__
qDebug() << "Config version is empty, trying to read pre-1.9.0 config";
//Try to read the config from the pre-1.9.0 final directory on OS X (we moved it in 1.9.0 final)
QFile* oldFile = new QFile(QDir::homePath().append("/").append(".mixxx/mixxx.cfg"));
if (oldFile->exists()) {
qDebug() << "Found pre-1.9.0 config for OS X";
config = new ConfigObject<ConfigValue>(QDir::homePath().append("/").append(".mixxx/mixxx.cfg"));
//Note: We changed SETTINGS_PATH in 1.9.0 final on OS X so it must be hardcoded to ".mixxx" here for legacy.
configVersion = config->getValueString(ConfigKey("[Config]","Version"));
delete oldFile;
}
else {
#endif
//This must have been the first run... right? :)
qDebug() << "No version number in configuration file. Setting to" << VERSION;
config->set(ConfigKey("[Config]","Version"), ConfigValue(VERSION));
m_bFirstRun = true;
return config;
#ifdef __APPLE__
}
#endif
}
// If it's already current, stop here
if (configVersion == VERSION) {
qDebug() << "Configuration file is at the current version" << VERSION;
return config;
}
// Allows for incremental upgrades incase someone upgrades from a few versions prior
// (I wish we could do a switch on a QString.)
/*
// Examples, since we didn't store the version number prior to v1.7.0
if (configVersion.startsWith("1.6.0")) {
qDebug() << "Upgrading from v1.6.0 to 1.6.1...";
// Upgrade tasks go here
configVersion = "1.6.1";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.6.1"));
}
if (configVersion.startsWith("1.6.1")) {
qDebug() << "Upgrading from v1.6.1 to 1.7.0...";
// Upgrade tasks go here
configVersion = "1.7.0";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.7.0"));
}
*/
//We use the following blocks to detect if this is the first time
//you've run the latest version of Mixxx. This lets us show
//the promo tracks stats agreement stuff for all users that are
//upgrading Mixxx.
if (configVersion.startsWith("1.7")) {
qDebug() << "Upgrading from v1.7.x...";
// Upgrade tasks go here
// Nothing to change, really
configVersion = "1.8.0";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.8.0"));
}
if (configVersion.startsWith("1.8.0~beta1") ||
configVersion.startsWith("1.8.0~beta2")) {
qDebug() << "Upgrading from v1.8.0~beta...";
// Upgrade tasks go here
configVersion = "1.8.0";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.8.0"));
}
if (configVersion.startsWith("1.8") || configVersion.startsWith("1.9.0beta1")) {
qDebug() << "Upgrading from" << configVersion << "...";
// Upgrade tasks go here
#ifdef __APPLE__
QString OSXLocation180 = QDir::homePath().append("/").append(".mixxx");
QString OSXLocation190 = settingsPath;
QDir newOSXDir(OSXLocation190);
newOSXDir.mkpath(OSXLocation190);
QList<QPair<QString, QString> > dirsToMove;
dirsToMove.push_back(QPair<QString, QString>(OSXLocation180, OSXLocation190));
dirsToMove.push_back(QPair<QString, QString>(OSXLocation180 + "/midi", OSXLocation190 + "midi"));
dirsToMove.push_back(QPair<QString, QString>(OSXLocation180 + "/presets", OSXLocation190 + "presets"));
QListIterator<QPair<QString, QString> > dirIt(dirsToMove);
QPair<QString, QString> curPair;
while (dirIt.hasNext())
{
curPair = dirIt.next();
qDebug() << "Moving" << curPair.first << "to" << curPair.second;
QDir oldSubDir(curPair.first);
QDir newSubDir(curPair.second);
newSubDir.mkpath(curPair.second); //Create the new destination directory
QStringList contents = oldSubDir.entryList(QDir::Files | QDir::NoDotAndDotDot);
QStringListIterator it(contents);
QString cur;
//Iterate over all the files in the source directory and copy them to the dest dir.
while (it.hasNext())
{
cur = it.next();
QString src = curPair.first + "/" + cur;
QString dest = curPair.second + "/" + cur;
qDebug() << "Copying" << src << "to" << dest;
if (!QFile::copy(src, dest))
{
qDebug() << "Failed to move file during upgrade.";
}
}
//Rename the old directory.
newOSXDir.rename(OSXLocation180, OSXLocation180 + "-1.8");
}
//Reload the configuration file from the new location.
//(We want to make sure we save to the new location...)
config = new ConfigObject<ConfigValue>(settingsPath + SETTINGS_FILE);
#endif
configVersion = "1.9.0";
config->set(ConfigKey("[Config]","Version"), ConfigValue("1.9.0"));
}
if (configVersion.startsWith("1.9") || configVersion.startsWith("1.10")) {
qDebug() << "Upgrading from v1.9.x/1.10.x...";
bool successful = true;
qDebug() << "Copying midi/ to controllers/";
QString midiPath = legacyUserPresetsPath(config);
QString controllerPath = userPresetsPath(config);
QDir oldDir(midiPath);
QDir newDir(controllerPath);
newDir.mkpath(controllerPath); // create the new directory
QStringList contents = oldDir.entryList(QDir::Files | QDir::NoDotAndDotDot);
QStringListIterator it(contents);
QString cur;
//Iterate over all the files in the source directory and copy them to the dest dir.
while (it.hasNext()) {
cur = it.next();
if (newDir.exists(cur)) {
qDebug() << cur << "already exists in"
<< controllerPath << "Skipping.";
continue;
}
QString src = oldDir.absoluteFilePath(cur);
QString dest = newDir.absoluteFilePath(cur);
qDebug() << "Copying" << src << "to" << dest;
if (!QFile::copy(src, dest)) {
qDebug() << "Failed to copy file during upgrade.";
successful = false;
}
}
bool reanalyze_choice = askReanalyzeBeats();
config->set(ConfigKey(BPM_CONFIG_KEY,
BPM_REANALYZE_WHEN_SETTINGS_CHANGE),
ConfigValue(reanalyze_choice));
if (successful) {
qDebug() << "Upgrade Successful";
configVersion = "1.11.0";
m_bUpgraded = true;
config->set(ConfigKey("[Config]","Version"),
ConfigValue(configVersion));
} else {
qDebug() << "Upgrade Failed";
}
}
if (configVersion.startsWith("1.11")) {
qDebug() << "Upgrading from v1.11.x...";
// upgrade to the multi library folder settings
QString currentFolder = config->getValueString(PREF_LEGACY_LIBRARY_DIR);
// to migrate the DB just add the current directory to the new
// directories table
TrackCollection tc(config);
DirectoryDAO directoryDAO = tc.getDirectoryDAO();
// NOTE(rryan): We don't have to ask for sandbox permission to this
// directory because the normal startup integrity check in Library will
// notice if we don't have permission and ask for access. Also, the
// Sandbox isn't setup yet at this point in startup because it relies on
// the config settings path and this function is what loads the config
// so it's not ready yet.
bool successful = directoryDAO.addDirectory(currentFolder);
// ask for library rescan to activate cover art. We can later ask for
// this variable when the library scanner is constructed.
m_bRescanLibrary = askReScanLibrary();
// if everything until here worked fine we can mark the configuration as
// updated
if (successful) {
configVersion = VERSION;
m_bUpgraded = true;
config->set(ConfigKey("[Config]","Version"), ConfigValue(VERSION));
}
else {
qDebug() << "Upgrade failed!\n";
}
}
if (configVersion == VERSION) qDebug() << "Configuration file is now at the current version" << VERSION;
else {
/* Way too verbose, this confuses the hell out of Linux users when they see this:
qWarning() << "Configuration file is at version" << configVersion
<< "and I don't know how to upgrade it to the current" << VERSION
<< "\n (That means a function to do this needs to be added to upgrade.cpp.)"
<< "\n-> Leaving the configuration file version as-is.";
*/
qWarning() << "Configuration file is at version" << configVersion
<< "instead of the current" << VERSION;
}
return config;
}