otError otPlatUartDisable(void)
{
otError error = OT_ERROR_NONE;
otEXPECT_ACTION(sUartEnabled == true, error = OT_ERROR_ALREADY);
// Disable NVIC interrupt.
NVIC_DisableIRQ(UART_IRQN);
NVIC_ClearPendingIRQ(UART_IRQN);
NVIC_SetPriority(UART_IRQN, 0);
// Disable interrupts for TX.
nrf_uart_int_disable(UART_INSTANCE, NRF_UART_INT_MASK_TXDRDY);
// Disable interrupts for RX.
nrf_uart_int_disable(UART_INSTANCE, NRF_UART_INT_MASK_RXDRDY | NRF_UART_INT_MASK_ERROR);
// Disable UART instance.
nrf_uart_disable(UART_INSTANCE);
// Release HF clock.
nrf_drv_clock_hfclk_release();
sUartEnabled = false;
exit:
return error;
}
otError otPlatUartDisable(void)
{
// Disable UART instance.
nrf_uart_disable(UART_INSTANCE);
// Release HF clock.
nrf_drv_clock_hfclk_release();
return OT_ERROR_NONE;
}
void nrfx_uart_uninit(nrfx_uart_t const * p_instance)
{
uart_control_block_t * p_cb = &m_cb[p_instance->drv_inst_idx];
nrf_uart_disable(p_instance->p_reg);
if (p_cb->handler)
{
interrupts_disable(p_instance);
}
pins_to_default(p_instance);
#if NRFX_CHECK(NRFX_PRS_ENABLED)
nrfx_prs_release(p_instance->p_reg);
#endif
p_cb->state = NRFX_DRV_STATE_UNINITIALIZED;
p_cb->handler = NULL;
NRFX_LOG_INFO("Instance uninitialized: %d.", p_instance->drv_inst_idx);
}
static rt_err_t _uart_cfg(struct rt_serial_device *serial, struct serial_configure *cfg)
{
nrf_drv_uart_config_t config = NRF_DRV_UART_DEFAULT_CONFIG;
UART_CFG_T *instance = &uart0;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
if (serial->parent.user_data != RT_NULL)
{
instance = (UART_CFG_T*)serial->parent.user_data;
}
nrf_uart_disable(instance->uart.reg.p_uart);
switch (cfg->baud_rate)
{
case 115200:
config.baudrate = NRF_UART_BAUDRATE_115200;
break;
case 9600:
config.baudrate = NRF_UART_BAUDRATE_9600;
break;
default:
config.baudrate = NRF_UART_BAUDRATE_115200;
break;
}
if (cfg->parity == PARITY_NONE)
{
config.parity = NRF_UART_PARITY_EXCLUDED;
}
else
{
config.parity = NRF_UART_PARITY_INCLUDED;
}
config.hwfc = NRF_UART_HWFC_DISABLED;
config.interrupt_priority = APP_IRQ_PRIORITY_LOWEST;
config.pselcts = 0;
config.pselrts = 0;
config.pselrxd = instance->rx_pin;
config.pseltxd = instance->tx_pin;
nrf_gpio_pin_set(config.pseltxd);
nrf_gpio_cfg_output(config.pseltxd);
nrf_gpio_pin_clear(config.pseltxd);
nrf_gpio_cfg_input(config.pselrxd, NRF_GPIO_PIN_NOPULL);
nrf_uart_baudrate_set(instance->uart.reg.p_uart, config.baudrate);
nrf_uart_configure(instance->uart.reg.p_uart, config.parity, config.hwfc);
nrf_uart_txrx_pins_set(instance->uart.reg.p_uart, config.pseltxd, config.pselrxd);
if (config.hwfc == NRF_UART_HWFC_ENABLED)
{
nrf_uart_hwfc_pins_set(instance->uart.reg.p_uart, config.pselrts, config.pselcts);
}
nrf_uart_event_clear(instance->uart.reg.p_uart, NRF_UART_EVENT_TXDRDY);
nrf_uart_event_clear(instance->uart.reg.p_uart, NRF_UART_EVENT_RXDRDY);
nrf_uart_event_clear(instance->uart.reg.p_uart, NRF_UART_EVENT_RXTO);
nrf_uart_event_clear(instance->uart.reg.p_uart, NRF_UART_EVENT_ERROR);
nrf_uart_int_enable(instance->uart.reg.p_uart, NRF_UART_INT_MASK_RXDRDY | NRF_UART_INT_MASK_RXTO | NRF_UART_INT_MASK_ERROR);
nrf_drv_common_irq_enable(nrf_drv_get_IRQn((void *)instance->uart.reg.p_uart), config.interrupt_priority);
nrf_uart_enable(instance->uart.reg.p_uart);
// nrf_uart_task_trigger(instance->uart.reg.p_uart, NRF_UART_TASK_STARTRX);
working_cfg = instance;
return RT_EOK;
}
static rt_err_t _uart_ctrl(struct rt_serial_device *serial, int cmd, void *arg)
{
UART_CFG_T *instance = working_cfg;
RT_ASSERT(serial != RT_NULL);
if (serial->parent.user_data != RT_NULL)
{
instance = (UART_CFG_T*)serial->parent.user_data;
}
switch (cmd)
{
/* disable interrupt */
case RT_DEVICE_CTRL_CLR_INT:
nrf_uart_task_trigger(instance->uart.reg.p_uart, NRF_UART_TASK_STOPRX);
nrf_uart_int_disable(instance->uart.reg.p_uart, NRF_UART_INT_MASK_RXDRDY
| NRF_UART_INT_MASK_RXTO
| NRF_UART_INT_MASK_ERROR);
nrf_drv_common_irq_disable(nrf_drv_get_IRQn((void *)instance->uart.reg.p_uart));
break;
/* enable interrupt */
case RT_DEVICE_CTRL_SET_INT:
nrf_uart_event_clear(instance->uart.reg.p_uart, NRF_UART_EVENT_RXDRDY);
nrf_uart_event_clear(instance->uart.reg.p_uart, NRF_UART_EVENT_RXTO);
nrf_uart_event_clear(instance->uart.reg.p_uart, NRF_UART_EVENT_ERROR);
/* Enable RX interrupt. */
nrf_uart_int_enable(instance->uart.reg.p_uart, NRF_UART_INT_MASK_RXDRDY
| NRF_UART_INT_MASK_RXTO
| NRF_UART_INT_MASK_ERROR);
nrf_drv_common_irq_enable(nrf_drv_get_IRQn((void *)instance->uart.reg.p_uart), APP_IRQ_PRIORITY_LOWEST);
nrf_uart_task_trigger(instance->uart.reg.p_uart, NRF_UART_TASK_STARTRX);
break;
case RT_DEVICE_CTRL_CUSTOM:
if ((rt_uint32_t)(arg) == UART_CONFIG_BAUD_RATE_9600)
{
instance->serial->config.baud_rate = 9600;
nrf_uart_baudrate_set(instance->uart.reg.p_uart, NRF_UART_BAUDRATE_9600);
}
else if ((rt_uint32_t)(arg) == UART_CONFIG_BAUD_RATE_115200)
{
instance->serial->config.baud_rate = 115200;
nrf_uart_baudrate_set(instance->uart.reg.p_uart, NRF_UART_BAUDRATE_115200);
}
// _uart_cfg(instance->serial, &(instance->serial->config));
// nrf_uart_task_trigger(instance->uart.reg.p_uart, NRF_UART_TASK_STARTRX);
break;
case RT_DEVICE_CTRL_PIN:
if (working_cfg != instance)
{
_uart_cfg(instance->serial, &(instance->serial->config));
}
break;
case RT_DEVICE_POWERSAVE:
nrf_uart_disable(instance->uart.reg.p_uart);
nrf_uart_txrx_pins_disconnect(instance->uart.reg.p_uart);
nrf_gpio_pin_clear(instance->rx_pin);
nrf_gpio_cfg_output(instance->rx_pin);
nrf_gpio_pin_clear(instance->tx_pin);
nrf_gpio_cfg_output(instance->tx_pin);
break;
case RT_DEVICE_WAKEUP:
_uart_cfg(instance->serial, &(instance->serial->config));
break;
default:
return RT_ERROR;
}
return RT_EOK;
}