C++ (Cpp) olinuxino_init_usb 예제들

예제 #1

파일: imx23-olinuxino.c 프로젝트: Reggi3/mini210s-barebox

static int imx23_olinuxino_devices_init(void)
{
	int i, rc;


	/* initizalize gpios */
	for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
		imx_gpio_mode(pad_setup[i]);

	armlinux_set_bootparams((void *)IMX_MEMORY_BASE + 0x100);
	armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);

	/* enable IOCLK to run at the PLL frequency */
	imx_set_ioclk(480000000);

	/* run the SSP unit clock at 100,000 kHz */
	imx_set_sspclk(0, 100000000, 1);

	add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
					0x8000, IORESOURCE_MEM, &mci_pdata);

	olinuxino_init_usb();

	rc = envfs_register_partition("disk0", 1);
	if (rc != 0)
		printf("Cannot create the 'env0' persistent "
			 "environment storage (%d)\n", rc);

	return 0;
}

예제 #2

파일: imx23-olinuxino.c 프로젝트: MinimumLaw/ravion-barebox

static int imx23_olinuxino_devices_init(void)
{
	armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);
	defaultenv_append_directory(defaultenv_imx233_olinuxino);

	led_gpio_register(&led1);
	led_set_trigger(LED_TRIGGER_HEARTBEAT, &led1.led);

	add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
					0x8000, IORESOURCE_MEM, &mci_pdata);

	olinuxino_init_usb();

	default_environment_path_set("/dev/disk0.1");

	return 0;
}

예제 #3

파일: imx23-olinuxino.c 프로젝트: RobertCNelson/barebox

static int imx23_olinuxino_devices_init(void)
{
	int i;

	/* initizalize gpios */
	for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
		imx_gpio_mode(pad_setup[i]);

	armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);

	add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
					0x8000, IORESOURCE_MEM, &mci_pdata);

	olinuxino_init_usb();

	default_environment_path_set("/dev/disk0.1");

	return 0;
}

예제 #4

파일: imx23-olinuxino.c 프로젝트: bmourit/barebox

static int imx23_olinuxino_devices_init(void)
{
	int i, rc;


	/* initizalize gpios */
	for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
		imx_gpio_mode(pad_setup[i]);

	armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);

	add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
					0x8000, IORESOURCE_MEM, &mci_pdata);

	olinuxino_init_usb();

	rc = envfs_register_partition("disk0", 1);
	if (rc != 0)
		printf("Cannot create the 'env0' persistent "
			 "environment storage (%d)\n", rc);

	return 0;
}