// Set the data source inputs.
void AM1DRunningAverageFilterAB::setInputDataSourcesImplementation(const QList<AMDataSource*>& dataSources) {
// disconnect connections from old source, if it exists.
if(inputSource_) {
disconnect(inputSource_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(inputSource_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(inputSource_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
if(dataSources.isEmpty()) {
inputSource_ = 0;
sources_.clear();
axes_[0] = AMAxisInfo("invalid", 0, "No input data");
setDescription("-- No input data --");
}
// we know that this will only be called with valid input source
else {
inputSource_ = dataSources.at(0);
sources_ = dataSources;
axes_[0] = inputSource_->axisInfoAt(0);
setDescription(QString("Running Average of %1")
.arg(inputSource_->name()));
connect(inputSource_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(inputSource_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(inputSource_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
reviewState();
emitSizeChanged(0);
emitValuesChanged();
emitAxisInfoChanged(0);
emitInfoChanged();
}
// Set the data source inputs.
void AM2DDeadTimeAB::setInputDataSourcesImplementation(const QList<AMDataSource*>& dataSources)
{
// disconnect connections from old sources, if they exist.
if(spectra_ != 0 && icr_ != 0 && ocr_ != 0) {
disconnect(spectra_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(spectra_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(spectra_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
disconnect(icr_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(icr_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(icr_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
disconnect(ocr_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(ocr_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(ocr_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
spectra_ = 0;
icr_ = 0;
ocr_ = 0;
}
void AM1DDarkCurrentCorrectionAB::setInputSources()
{
if (data_){
disconnect(data_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(data_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(data_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
data_ = 0;
}
if (dwellTime_){
disconnect(dwellTime_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(dwellTime_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(dwellTime_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
dwellTime_ = 0;
}
int dataIndex = indexOfInputSource(dataName_);
int dwellTimeIndex = indexOfInputSource(dwellTimeName_);
if (dataIndex >= 0 && dwellTimeIndex >= 0){
data_ = inputDataSourceAt(dataIndex);
dwellTime_ = inputDataSourceAt(dwellTimeIndex);
canAnalyze_ = true;
axes_[0] = data_->axisInfoAt(0);
setDescription(QString("Dark Current Corrected %1").arg(data_->name()));
connect(data_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(data_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(data_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
connect(dwellTime_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(dwellTime_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(dwellTime_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
void AM1DNormalizationAB::setInputSources()
{
if (data_){
disconnect(data_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(data_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(data_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
data_ = 0;
}
if (normalizer_){
disconnect(normalizer_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(normalizer_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(normalizer_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
normalizer_ = 0;
}
int dataIndex = indexOfInputSource(dataName_);
int normalizationIndex = indexOfInputSource(normalizationName_);
if (dataIndex >= 0 && normalizationIndex >= 0){
data_ = inputDataSourceAt(dataIndex);
normalizer_ = inputDataSourceAt(normalizationIndex);
canAnalyze_ = true;
axes_[0] = data_->axisInfoAt(0);
cacheUpdateRequired_ = true;
cachedData_ = QVector<double>(size().product());
setDescription(QString("Normalized %1").arg(data_->name()));
connect(data_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(data_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(data_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
connect(normalizer_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(normalizer_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(normalizer_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
// Set the data source inputs.
void AM1DSummingAB::setInputDataSourcesImplementation(const QList<AMDataSource*>& dataSources)
{
// disconnect connections from old sources, if they exist.
if(!sources_.isEmpty()) {
for (int i = 0; i < sources_.size(); i++){
disconnect(sources_.at(i)->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(sources_.at(i)->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(sources_.at(i)->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
}
if(dataSources.isEmpty()) {
sources_.clear();
axes_[0] = AMAxisInfo("invalid", 0, "No input data");
setDescription("-- No input data --");
}
// we know that this will only be called with valid input source
else {
sources_ = dataSources;
axes_[0] = sources_.at(0)->axisInfoAt(0);
setDescription(QString("Sum of %1 spectra").arg(sources_.size()));
for (int i = 0; i < sources_.size(); i++){
connect(sources_.at(i)->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(sources_.at(i)->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(sources_.at(i)->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
}
reviewState();
emitSizeChanged(0);
emitValuesChanged();
emitAxisInfoChanged(0);
emitInfoChanged();
}
void AM2DNormalizationAB::setInputDataSourcesImplementation(const QList<AMDataSource *> &dataSources)
{
if (data_){
disconnect(data_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(data_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(data_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
data_ = 0;
}
if (normalizer_){
disconnect(normalizer_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(normalizer_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(normalizer_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
normalizer_ = 0;
}
if (dataSources.isEmpty()){
data_ = 0;
normalizer_ = 0;
sources_.clear();
canAnalyze_ = false;
axes_[0] = AMAxisInfo("invalid", 0, "No input data");
axes_[1] = AMAxisInfo("invalid", 0, "No input data");
setDescription("Normalized 2D Data Source");
}
else if (dataSources.count() == 2){
data_ = dataSources.at(0);
normalizer_ = dataSources.at(1);
sources_ = dataSources;
canAnalyze_ = true;
axes_[0] = data_->axisInfoAt(0);
axes_[1] = data_->axisInfoAt(1);
setDescription(QString("Normalized %1 map").arg(data_->name()));
connect(data_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(data_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(data_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
connect(normalizer_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(normalizer_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(normalizer_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
void AM1DDerivativeAB::setInputDataSourcesImplementation(const QList<AMDataSource*>& dataSources)
{
// disconnect connections from old source, if it exists.
if(inputSource_) {
disconnect(inputSource_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(inputSource_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(inputSource_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
inputSource_ = 0;
}
if(dataSources.isEmpty()) {
inputSource_ = 0;
sources_.clear();
canAnalyze_ = false;
axes_[0] = AMAxisInfo("invalid", 0, "No input data");
setDescription("Derivative");
}
// we know that this will only be called with valid input source
else if (dataSources.count() == 1){
inputSource_ = dataSources.at(0);
sources_ = dataSources;
canAnalyze_ = true;
axes_[0] = inputSource_->axisInfoAt(0);
cacheUpdateRequired_ = true;
cachedData_ = QVector<double>(size(0));
setDescription(QString("Derivative of %1").arg(inputSource_->name()));
connect(inputSource_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(inputSource_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(inputSource_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
// Set the data source inputs.
void AM4DBinningAB::setInputDataSourcesImplementation(const QList<AMDataSource*>& dataSources) {
// disconnect connections from old source, if it exists.
if(inputSource_) {
disconnect(inputSource_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(inputSource_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(inputSource_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
inputSource_ = 0;
}
if(dataSources.isEmpty()) {
inputSource_ = 0;
sources_.clear();
canAnalyze_ = false;
axes_[0] = AMAxisInfo("invalid", 0, "No input data");
axes_[1] = AMAxisInfo("invalid", 0, "No input data");
axes_[2] = AMAxisInfo("invalid", 0, "No input data");
setDescription("-- No input data --");
}
// we know that this will only be called with valid input source
else if (dataSources.count() == 1) {
inputSource_ = dataSources.at(0);
sources_ = dataSources;
canAnalyze_ = true;
switch (sumAxis_) {
case 0:
axes_[0] = inputSource_->axisInfoAt(1);
axes_[1] = inputSource_->axisInfoAt(2);
axes_[2] = inputSource_->axisInfoAt(3);
break;
case 1:
axes_[0] = inputSource_->axisInfoAt(0);
axes_[1] = inputSource_->axisInfoAt(2);
axes_[2] = inputSource_->axisInfoAt(3);
break;
case 2:
axes_[0] = inputSource_->axisInfoAt(0);
axes_[1] = inputSource_->axisInfoAt(1);
axes_[2] = inputSource_->axisInfoAt(3);
break;
case 3:
axes_[0] = inputSource_->axisInfoAt(0);
axes_[1] = inputSource_->axisInfoAt(1);
axes_[2] = inputSource_->axisInfoAt(2);
}
cacheUpdateRequired_ = true;
cachedData_ = QVector<double>(size().product());
setDescription(QString("%1 Summed (over %2)")
.arg(inputSource_->name())
.arg(inputSource_->axisInfoAt(sumAxis_).name));
connect(inputSource_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(inputSource_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(inputSource_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
void AMOrderReductionAB::setInputSources()
{
if (source_){
disconnect(source_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(source_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(source_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
source_ = 0;
}
int selectedIndex = indexOfInputSource(selectedName_);
if (selectedIndex >= 0){
source_ = inputDataSourceAt(selectedIndex);
axes_.clear();
for (int i = 0; i < source_->rank()-1; i++)
axes_.append(AMAxisInfo("invalid", 0, "No input data"));
updateAxes();
cacheUpdateRequired_ = true;
cachedData_ = QVector<double>(size().product());
setDescription(QString("Reduced Order of %1").arg(source_->name()));
connect(source_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(source_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(source_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
// Set the data source inputs.
void AM3DAdditionAB::setInputDataSourcesImplementation(const QList<AMDataSource*>& dataSources)
{
// disconnect connections from old sources, if they exist.
if(!sources_.isEmpty()) {
for (int i = 0; i < sources_.size(); i++){
disconnect(sources_.at(i)->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(sources_.at(i)->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(sources_.at(i)->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
}
if(dataSources.isEmpty()) {
sources_.clear();
axes_[0] = AMAxisInfo("invalid", 0, "No input data");
axes_[1] = AMAxisInfo("invalid", 0, "No input data");
axes_[2] = AMAxisInfo("invalid", 0, "No input data");
setDescription("-- No input data --");
}
// we know that this will only be called with valid input source
else {
sources_ = dataSources;
axes_[0] = sources_.at(0)->axisInfoAt(0);
axes_[1] = sources_.at(0)->axisInfoAt(1);
axes_[2] = sources_.at(0)->axisInfoAt(2);
cacheUpdateRequired_ = true;
dirtyIndices_.clear();
cachedData_ = QVector<double>(size().product());
setDescription(QString("Sum of spectra from %1 maps").arg(sources_.size()));
for (int i = 0; i < sources_.size(); i++){
connect(sources_.at(i)->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(sources_.at(i)->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(sources_.at(i)->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
}
reviewState();
emitSizeChanged();
emitValuesChanged();
emitAxisInfoChanged();
emitInfoChanged();
}
/* \note Whenever new input sources are set, if the xExpression() is blank/invalid, it is automatically initialized to the axisValue() of the first input source. Otherwise it, like expression(), is left as it was prior to setting the new inputs. Note that if the names of the new inputs are different, the old expressions will both likely become invalid. */
void AM1DExpressionAB::setInputDataSourcesImplementation(const QList<AMDataSource*>& dataSources) {
currentlySettingInputSources_ = true;
QString oldExpression = expression();
QString oldXExpression = xExpression();
// disconnect signals from the old data sources (if any)
for(int i=0; i<inputDataSourceCount(); i++) {
disconnect(inputDataSourceAt(i)->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(inputDataSourceAt(i)->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(inputDataSourceAt(i)->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
// done with the old sources; these are our new sources now
sources_ = dataSources;
// clear old parser variables
parser_.ClearVar();
xParser_.ClearVar();
allVariables_.clear();
usedVariables_.clear();
// create registry of variables: two for each source
for(int i=0; i<sources_.count(); i++) {
allVariables_ << AMParserVariable(i, false); // dependent value() variable
allVariables_ << AMParserVariable(i, true); // independent axisValue() variable
}
// install all these variables in the parser. Name comes from the data source name, with ".x" added for the axisValue() version.
for(int i=0; i<allVariables_.count(); i++) {
QString varName = sources_.at(allVariables_.at(i).sourceIndex)->name();
if(allVariables_.at(i).useAxisValue)
varName.append(".x");
try {
parser_.DefineVar( varName.toStdString(), &(allVariables_[i].value) );
xParser_.DefineVar( varName.toStdString(), &(allVariables_[i].value) );
}
catch(mu::Parser::exception_type& e) {
QString explanation = QString("AM1DExpressionAB: Error setting up variables: %1 [%2].").arg(QString::fromStdString(e.GetMsg())).arg(varName);
AMErrorMon::report(AMErrorReport(this, AMErrorReport::Alert, e.GetCode(), explanation));
}
}
// connect new input sources to signal handlers.
for(int i=0; i<sources_.count(); i++) {
connect(sources_.at(i)->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex))); /// \todo Optimization: only connect this when this input source is actually used in the expression...
connect(inputDataSourceAt(i)->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(inputDataSourceAt(i)->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
// initialize the combination of state flags. These will be kept updated by onInputSourceStateChanged()
combinedInputState_ = 0;
for(int i=0; i<sources_.count(); i++)
combinedInputState_ |= sources_.at(i)->state();
// initialize whether the sizes all match. This will be kept updated by onInputSourceSizeChanged()
sizesMatch_ = true;
size_ = 0;
if(!sources_.isEmpty()) {
size_ = sources_.at(0)->size(0);
for(int i=1; i<sources_.count(); i++)
if(sources_.at(i)->size(0) != size_)
sizesMatch_ = false;
}
setExpression(oldExpression);
setXExpression(oldXExpression);
// both the setExpression() and setXExpression() calls will end by calling reviewState(), which will call setState() appropriately, given the status of the inputs, their sizes, and the expression validity.
currentlySettingInputSources_ = false;
}
void REIXSXESImageInterpolationAB::setInputDataSourcesImplementation(const QList<AMDataSource *> &dataSources)
{
// disconnect connections from old source, if it exists.
if(inputSource_) {
disconnect(inputSource_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
disconnect(inputSource_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
disconnect(inputSource_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
inputSource_ = 0;
}
if(dataSources.isEmpty()) {
inputSource_ = 0;
sources_.clear();
axes_[0] = AMAxisInfo("invalid", 0, "No input data");
}
// we know that this will only be called with one valid input source
else {
inputSource_ = dataSources.at(0);
sources_ = dataSources;
axes_[0] = inputSource_->axisInfoAt(0); // take the X axis info from the data source.
axes_[0].description = "Emission Energy";
axes_[0].units = "eV";
axes_[0].size /= binningLevel_;
cacheUpdateRequired_ = true;
axisValueCacheInvalid_ = true;
cachedData_ = QVector<double>(axes_.at(0).size);
cachedAxisValues_ = QVector<double>(axes_.at(0).size);
if(shiftValues1_.isEmpty()) {
for(int i=0,cc=inputSource_->size(1); i<cc; i++)
shiftValues1_ << 0; // make a null shift list, matching the size of the input data. Don't do this if we already have a shift list.
}
if(shiftValues2_.isEmpty()) {
for(int i=0,cc=inputSource_->size(1); i<cc; i++)
shiftValues2_ << 0; // make a null shift list, matching the size of the input data. Don't do this if we already have a shift list.
}
connect(inputSource_->signalSource(), SIGNAL(valuesChanged(AMnDIndex,AMnDIndex)), this, SLOT(onInputSourceValuesChanged(AMnDIndex,AMnDIndex)));
connect(inputSource_->signalSource(), SIGNAL(sizeChanged(int)), this, SLOT(onInputSourceSizeChanged()));
connect(inputSource_->signalSource(), SIGNAL(stateChanged(int)), this, SLOT(onInputSourceStateChanged()));
}
reviewState();
emitSizeChanged();
emitValuesChanged();
emitAxisInfoChanged();
emitInfoChanged();
}