예제 #1
0
void
smf_inbeam_str ( smf_inbeam_t inbeam, char *inbeamstr, size_t lenstr, int * status ) {

  #define NPAIRS 3
  const smfBeamPair beampairs[] = {
    { SMF__INBEAM_POL, "POL" },
    { SMF__INBEAM_FTS, "FTS" },
    { SMF__INBEAM_BLACKBODY, "BLACKBODY" } };

  int i;
  int started = 0;    /* indicate whether we already have a string copied in */

  if (inbeamstr) inbeamstr[0] = '\0';
  if (*status != SAI__OK) return;

  for ( i = 0; i < NPAIRS; i++ ) {
    const smfBeamPair bp = beampairs[i];
    if (inbeam & bp.inbeam) {
      if (started) one_strlcat( inbeamstr, " ", lenstr, status );
      one_strlcat( inbeamstr, bp.str, lenstr, status );
      started = 1;
    }
  }

}
예제 #2
0
void smf_stripsuffix( const char *instr, const char *suffix,
                      char *outstr, int *status) {

  /* Local Variables */
  int added;                    /* Number of names added to group */
  int flag;                     /* Flag */
  char grpex[GRP__SZNAM+1];     /* String for holding grpex */
  Grp *inname=NULL;             /* 1-element group to hold input string */
  size_t len;                   /* Length of buffer */
  size_t msize;                 /* Size of group */
  Grp *outname = NULL;          /* 1-element group to hold output string */
  char *pname=NULL;             /* Poiner to name */
  const char *p;                /* Pointer to first character after next "/" */
  const char *q;                /* Pointer to next "/" */

  /* Main routine */
  if (*status != SAI__OK) return;

  inname = grpNew( "GRP", status );
  outname = grpNew( "GRP", status );

  p = instr;
  q = strchr( p, '/' );
  while( q ) {
     p = q + 1;
     q = strchr( p, '/' );
  }

  grpPut1( inname, p, 1, status );

  len = sizeof(grpex);
  one_strlcpy( grpex, "*|", len, status );
  one_strlcat( grpex, suffix, len, status );
  one_strlcat( grpex, "||", len, status );

  grpGrpex( grpex, inname, outname, &msize, &added, &flag, status );
  pname = outstr;
  grpGet( outname, 1, 1, &pname, GRP__SZNAM, status );

  grpDelet( &inname, status );
  grpDelet( &outname, status );
}
예제 #3
0
파일: datMap.c 프로젝트: Starlink/hds-v5
int
datMap(HDSLoc *locator, const char *type_str, const char *mode_str, int ndim,
       const hdsdim dims[], void **pntr, int *status) {

  int isprim = 0;
  char normtypestr[DAT__SZTYP+1];
  size_t nbytes = 0;
  hid_t h5type = 0;
  int isreg = 0;
  void *regpntr = NULL;
  void *mapped = NULL;
  hdsmode_t accmode = HDSMODE_UNKNOWN;
  haddr_t offset;
  hdsbool_t try_mmap = HDS_FALSE;
  unsigned intent = 0;
  size_t actbytes = 0;

  if (*status != SAI__OK) return *status;

  /* First have to validate the access mode */
  switch (mode_str[0]) {
  case 'R':
  case 'r':
    accmode = HDSMODE_READ;
    break;
  case 'U':
  case 'u':
    accmode = HDSMODE_UPDATE;
    break;
  case 'W':
  case 'w':
    accmode = HDSMODE_WRITE;
    break;
  default:
    *status = DAT__MODIN;
    emsRepf("datMap_6", "Unrecognized mode string '%s' for datMap",
            status, mode_str);
    goto CLEANUP;
  }

  /* Validate input locator. */
  dat1ValidateLocator( "datMap", 1, locator, (accmode & HDSMODE_READ), status );

  /* Get the HDF5 type code and confirm this is a primitive type */
  isprim = dau1CheckType( 1, type_str, &h5type, normtypestr,
                          sizeof(normtypestr), status );

  if (!isprim) {
    if (*status == SAI__OK) {
      *status = DAT__TYPIN;
      emsRepf("datMap_1", "datGet: Data type must be a primitive type and not '%s'",
              status, normtypestr);
    }
    goto CLEANUP;
  }

  /* Not allowed to map undefined data in READ or UPDATE mode */
  if (accmode == HDSMODE_UPDATE || accmode == HDSMODE_READ) {
    hdsbool_t defined;
    if (*status == SAI__OK) {
      datState( locator, &defined, status );
      if (!defined) {
        *status = DAT__UNSET;
        emsRepf("datMap_6bb", "Can not map an undefined primitive in mode '%s'",
                status, mode_str);
        goto CLEANUP;
      }
    }
  }

  /* How did we open this file? */
  CALLHDFQ( H5Fget_intent( locator->file_id, &intent ));
  if (accmode == HDSMODE_UPDATE || accmode == HDSMODE_WRITE) {
    /* Must check whether the file was opened for write */
    if ( intent == H5F_ACC_RDONLY ) {
      *status = DAT__ACCON;
      emsRepf("datMap_6b", "datMap: Can not map readonly locator in mode '%s'",
             status, mode_str);
      goto CLEANUP;
    }
  }

  /* Verify that the specified dimensions match the locator dimensions */
  if (*status == SAI__OK) {
    hdsdim locdims[DAT__MXDIM];
    int locndims;
    int i;
    datShape(locator, DAT__MXDIM, locdims, &locndims, status );

    /* Note that if we are mapping as a scalar the locator should
       refer to a single element */
    if (ndim == 0) {
      size_t nelem = 1;
      for (i=0; i<locndims; i++) {
        nelem *= locdims[i];
      }
      if (nelem != 1) {
        *status = DAT__DIMIN;
        emsRepf("datMap_6e", "datMap: Attempt to map as a scalar but locator"
                " refers to a primitive with %zu elements",
                status, nelem);
        goto CLEANUP;
      }
    } else {
      if (ndim != locndims) {
        *status = DAT__DIMIN;
        emsRepf("datMap_6c", "datMap: Dimensionality mismatch --"
                " requested number: %d locator number: %d", status,
                ndim, locndims );
        goto CLEANUP;
      }
      for (i=0; i<ndim; i++) {
        if ( locdims[i] != dims[i] ) {
          *status = DAT__DIMIN;
          emsRepf("datMap_6d", "datMap: Dimension %d has size %zu but requested size %zu",
                  status, i, (size_t)locdims[i], (size_t)dims[i]);
          goto CLEANUP;
        }
      }
    }
  }

  /* There is a super-special case for datMap when called with a map
     type of "_CHAR". In that case we need to work out the size ourselves
     and adjust the type size */
  if (strcmp( "_CHAR", normtypestr ) == 0 ) {
    size_t clen = 0;
    char tmpbuff[DAT__SZTYP+1];
    datClen( locator, &clen, status );
    CALLHDFQ( H5Tset_size( h5type, clen ) );
    one_snprintf( tmpbuff, sizeof(tmpbuff), "*%zu",
                  status, clen );
    one_strlcat( normtypestr, tmpbuff, DAT__SZTYP+1, status );
  }

  /* Now we want the HDSTYPE of the requested type so that we can work out how much
     memory we will need to allocate. */
  CALLHDFE( size_t, nbytes,
          H5Tget_size( h5type ),
          DAT__HDF5E,
          emsRep("datLen_size", "datMap: Error obtaining size of requested data type",
                 status)
          );

  {
    int i;
    if (ndim > 0) {
      for (i = 0; i < ndim; i++) {
        nbytes *= dims[i];
      }
    }
  }


  /* Work out whether memory mapping is possible -- at the moment
     I'm pretty sure the only safe use of mmap is when we are reading
     the data and the file itself was opened readonly. I'm not sure what happens
     if other components are removed or added -- will the offset change? Maybe we just try */
  offset = H5Dget_offset( locator->dataset_id );
  if (offset != HADDR_UNDEF) {
    hid_t dataset_h5type = 0;
    /* In theory we can do a memory map so now compare
       the data types of the request and the low-level dataset. */
    CALLHDFE( hid_t, dataset_h5type,
             H5Dget_type( locator->dataset_id ),
             DAT__HDF5E,
             emsRep("datMap_type", "datType: Error obtaining data type of dataset", status)
             );
    if (H5Tequal( dataset_h5type, h5type )) {
      try_mmap = HDS_TRUE;
    }
    H5Tclose(dataset_h5type);
  }

  /* If this is a locator to a slice then for now we can't memory map. In theory
     if we knew the slice was contiguous (e.g a vectorized slice, or a single
     plane of a cube then we could mmap it anyhow. We do not want to have to
     emulate HDF5 dataspaces here */
  if (locator->isslice) try_mmap = 0;

  /* There seem to be issues doing this on files opened for update/write.
     For now only allow mmap for files opened read only */
  if (intent != H5F_ACC_RDONLY) try_mmap = 0;

  /* If mmap has been disabled by tuning the environment we just force it off here. */
  if (!hds1GetUseMmap()) try_mmap = 0;

#if DEBUG_HDS
  {
    char *name_str;
    char * file_str;
    const char * reason;
    name_str = dat1GetFullName( locator->dataset_id, 0, NULL, status );
    file_str = dat1GetFullName( locator->dataset_id, 1, NULL, status );
    if (offset != HADDR_UNDEF) {
      reason = "[HAD offset]";
    } else {
      reason = "[no offset]";
    }
    if (!try_mmap) {
      printf("Will NOT attempt %s to mmap %s:%s\n",reason,file_str,name_str);
    } else {
      printf("WILL TRY %s to mmap OFFSET=%zu %s:%s\n", reason, (size_t)offset, file_str, name_str);
    }
    MEM_FREE(name_str);
  }
#endif

  if (try_mmap) {
    int fd = 0;
    int flags = 0;
    int prot = 0;
    hdsbool_t opened_fd = 0;

    if ( intent == H5F_ACC_RDONLY || accmode == HDSMODE_READ ) {
      flags |= O_RDONLY;
      prot = PROT_READ;
    } else {
      flags |= O_RDWR;
      prot = PROT_READ | PROT_WRITE;
    }

    if (*status == SAI__OK) {
      /* see what file driver we have */
      hid_t fapl_id = -1;
      hid_t fdriv_id = -1;
      void * file_handle = NULL;
      herr_t herr = -1;
      fapl_id = H5Fget_access_plist(locator->file_id);
      fdriv_id = H5Pget_driver(fapl_id);
      if (fdriv_id == H5FD_SEC2 || fdriv_id == H5FD_STDIO) {
        /* If this is a POSIX or STDIO driver we get the handle */
        herr = H5Fget_vfd_handle( locator->file_id, fapl_id, (void**)&file_handle);
        if (herr >= 0) {
          if (fdriv_id == H5FD_SEC2) {
            fd = *((int *)file_handle);
          } else if (fdriv_id == H5FD_STDIO) {
            FILE * fh = (FILE *)file_handle;
            fd = fileno(fh);
          }
        }
      }
      if (fapl_id > 0) H5Pclose( fapl_id );

      if (fd == 0) {
        /* We have to open the file ourselves! */
        char * fname = NULL;
        fname = dat1GetFullName( locator->dataset_id, 1, NULL, status );
        fd = open(fname, flags);
        opened_fd = 1;
        if (fname) MEM_FREE(fname);
      }
      if (fd > 0) {
        /* Set up for memory mapping */
        int mflags = 0;
        mflags = MAP_SHARED | MAP_FILE;
        if (*status == SAI__OK) {
          mapped = dat1Mmap( nbytes, prot, mflags, fd, offset, &isreg, &regpntr, &actbytes, status );
          if (*status == SAI__OK) {
            /* Store the file descriptor in the locator to allow us to close */
            if (mapped) {
              if (opened_fd) locator->fdmap = fd;
              locator->uses_true_mmap = 1;
            }
          } else {
            /* Not currently fatal -- we can try without the file */
            if (opened_fd) close(fd);
            emsAnnul(status);
          }
        }
      }
    }
  }

  /* If we have not been able to map anything yet, just get some memory. It is
     zeroed (for WRITE) to match mmap behavior. We rely on the OS to decide when it is reasonable
     to do an anonymous mmap. */

  if (!regpntr) {
    hdsbool_t mustget;
    mustget = (accmode == HDSMODE_READ || accmode == HDSMODE_UPDATE);

    if (mustget) {
      regpntr = cnfMalloc( nbytes );
    } else {
      regpntr = cnfCalloc( 1, nbytes );
    }
    if (!regpntr) {
      *status = DAT__NOMEM;
      emsRepf("datMap_cnf","datMap: Unable to allocate %zu bytes of memory",
              status, nbytes);
      goto CLEANUP;
    }

    /* Populate the memory - check with datState occurred earlier */
    if (mustget) {
      datGet( locator, normtypestr, ndim, dims, regpntr, status );
    }
  }

 CLEANUP:
  /* Cleanups that must happen always */
  if (h5type) H5Tclose(h5type);

  /* cleanups that only happen if status is bad */
  if (*status != SAI__OK) {
    if (mapped) {
      if (isreg == 1) cnfUregp( regpntr );
      if ( munmap( mapped, actbytes ) != 0 ) {
        emsSyser( "MESSAGE", errno );
        emsRep("datMap_4", "Error unmapping mapped memory: ^MESSAGE", status);
      }
      mapped = NULL;
    } else if (regpntr) {
      cnfFree( regpntr );
    }
    regpntr = NULL;
  }

  /* Update the locator to reflect the mapped status */
  if (*status == SAI__OK) {
    int i;
    locator->pntr = mapped;
    locator->regpntr = regpntr;
    locator->bytesmapped = actbytes;
    locator->accmode = accmode;

    /* In order to copy the data back into the underlying HDF5 dataset
       we need to store additional information about how this was mapped
       to allow us to either call datPut later on or at least a new
       dataspace. For now store the arguments so we can pass them straight
       to datPut */
    locator->ndims = ndim;
    for (i=0; i<ndim; i++) {
      (locator->mapdims)[i] = dims[i];
    }
    star_strlcpy( locator->maptype, normtypestr, sizeof(locator->maptype) );
  }

  /* Note that the returned pointer is not necessarily the same as the
     mapped pointer because of pagesize corrections */
  *pntr = regpntr;

  return *status;
}
예제 #4
0
static double *smf1_calc_mapcoord1( smfData *data, dim_t nbolo,
                                    dim_t ntslice, AstSkyFrame *oskyfrm,
                                    int *indf, int axis, int *status ){
/*
*  Name:
*     smf1_calc_mapcoord1

*  Purpose:
*     Create and map an NDF to receive the longitude or latitude values
*     at every sample.

*  Language:
*     Starlink ANSI C

*  Type of Module:
*     C function

*  Invocation:
*     double *smf1_calc_mapcoord1( smfData *data, dim_t nbolo,
*                                  dim_t ntslice, AstFrame *oskyfrm,
*                                  int *indf, int axis, int *status )

*  Arguments:
*     data = smfData* (Given)
*        Pointer to smfData struct
*     nbolo = dim_t (Given)
*        The number of bolometers.
*     ntslice = dim_t (Given)
*        The number of time slices.
*     oskyfrm = AstFrame * (Given)
*        Pointer to the SkyFrame describing the output spatial cords.
*     indf = int * (Returned)
*        Address ayt which to return the identifier for the new NDF.
*     axis = int (Given)
*        Axis of the SkyFrame to use (1 or 2).
*     status = int* (Given and Returned)
*        Pointer to global status.

*  Returned Value:
*     Pointer to the mapped DATA array.

*  Description:
*     This function creates a new NDF with a named formed by appending
*     the axis symbol from oskyframe to the end of the file name associated
*     with the supplied smfData. The firts pixel axis spans bolometer
*     index and the second spans time slice index. The NDF character
*     components are set to describe the requested ais values.

*/

/* Local Variables: */
   char name[SMF_PATH_MAX+1];
   char sym[ 100 ];
   const char *label = NULL;
   const char *ttl = NULL;
   double *result = NULL;
   int el;
   int place;
   int pos_lbnd[2];
   int pos_ubnd[2];

/* Check inherited status */
   if( *status != SAI__OK ) return result;

/* Check the input file path is known. */
   if( data->file ) {

/* Remove any DIMM suffix, and any leading directory from the file path. */
      smf_stripsuffix( data->file->name, SMF__DIMM_SUFFIX, name, status );

/* Get the Frame title, and axis label. */
      ttl = astGetC( oskyfrm, "Title" );
      label = astGetC( oskyfrm, ( axis == 1 ) ? "Label(1)" : "Label(2)" );

/* Get a lower case copy of the axis symbol. */
      astChrCase( astGetC( oskyfrm,
                           ( axis == 1 ) ? "Symbol(1)" : "Symbol(2)" ), sym,
                           0, sizeof(sym) );

/* Append the lower case axis symbol to the file base name. */
       one_strlcat( name, "_", SMF_PATH_MAX + 1, status );
       one_strlcat( name, sym, SMF_PATH_MAX + 1, status );

/* Store the pixel bounds for the NDF. */
       pos_lbnd[ 0 ] = pos_lbnd[ 1 ] = 0;
       pos_ubnd[ 0 ] = nbolo - 1;
       pos_ubnd[ 1 ] = ntslice - 1;

/* Create the NDF and map its Data array. */
       ndfPlace( NULL, name, &place, status );
       ndfNew( "_DOUBLE", 2, pos_lbnd, pos_ubnd, &place, indf, status );
       ndfMap( *indf, "DATA", "_DOUBLE", "WRITE", (void **) &result, &el,
               status );

/* Set the NDF character components. */
       ndfCput( ttl, *indf, "TITLE", status );
       ndfCput( label, *indf, "LABEL", status );
       ndfCput( "deg", *indf, "UNITS", status );
       ndfAcput( "Bolometer index", *indf, "LABEL", 1, status );
       ndfAcput( "Time slice index", *indf, "LABEL", 2, status );
    }

/* Return the pointer to the mapped data array. */
   return result;
}
예제 #5
0
void cupid_mon( int *status ) {
/*
*+
*  Name:
*     cupid_mon

*  Purpose:
*     Top-level CUPID function for A-task monolith on UNIX.

*  Language:
*     Starlink C

*  Type of Module:
*     ADAM A-task

*  Description:
*     This is the top-level A-task monolith function for the CUPID
*     suite of A-tasks.  Each CUPID command is an alias to a softlink
*     that points to this monolith.  The chosen command is obtained
*     from the ADAM routine TASK_GET_NAME.  The command may be specified
*     from the shell or ICL.  Given the command, the requested A-task
*     is called after a successful matching of the input string with a
*     valid task name.  If there is no match, an error report is made.

*  Parameters:
*     status
*        Pointer to the global status variable used by the ADAM fixed part.

*  Synopsis:
*     void cupid_mon( int *status );

*  Copyright:
*     Copyright (C) 2009 Science & Technology Facilities Council.
*     Copyright (C) 2005 Particle Physics & Astronomy Research Council.
*     All Rights Reserved.

*  Licence:
*     This program is free software; you can redistribute it and/or
*     modify it under the terms of the GNU General Public License as
*     published by the Free Software Foundation; either version 2 of
*     the License, or (at your option) any later version.
*
*     This program is distributed in the hope that it will be
*     useful, but WITHOUT ANY WARRANTY; without even the implied
*     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
*     PURPOSE. See the GNU General Public License for more details.
*
*     You should have received a copy of the GNU General Public License
*     along with this program; if not, write to the Free Software
*     Foundation, Inc., 51 Franklin Street,Fifth Floor, Boston, MA
*     02110-1301, USA

*  Authors:
*     DSB: David S. Berry (STARLINK)
*     TIMJ: Tim Jenness (JAC, Hawaii)
*     {enter_new_authors_here}

*  History:
*     28-SEP-2005 (DSB):
*        Original version.
*     29-JUL-2009 (TIMJ):
*        Call taskGetName rather than Fortran.
*        Add CUPID and version number to NDF history.
*     31-JUL-2009 (DSB):
*        Use ndgBegpv/Endpv to provide automatic provenance propagation.
*     16-OCT-2009 (DSB):
*        Use ndgBeggh/ndgEndgh to record contents of group parameters in
*        the history component of output NDFs.
*     2011-01-19 (TIMJ):
*        Add leak checking to CUPID monolith
*     {enter_further_changes_here}

*  Bugs:
*     {note_any_bugs_here}

*-
*/

/* Local variables: */
   char appname[NDF__SZAPP+1];    /* Application name for NDF History */
   char buff[PAR__SZNAM+7];       /* Application name for provenance handling */
   char filter[PAR__SZNAM+PAR__SZNAM+1];
   char name[PAR__SZNAM+1];       /* C character variable to hold name */
   int ast_caching;               /* Initial value of AST MemoryCaching tuning parameter */
   int emslev1;                   /* EMS level on entry */
   int emslev2;                   /* EMS level on exit */
   int ngrp0;                     /* Number of grp ids at start */
   int ngrp1;                     /* Number of grp ids at end */
   int nloc0;                     /* Number of active HDS Locators at start */
   int nloc1;                     /* Number of active HDS Locators at end */

/* Check the inherited status. */
   if( *status != SAI__OK ) return;

/* For debugging, watch one of the leaked GRP identifiers listed by the
   call to grpWatch at the end of this routine (if any). */
   /* grpWatch( 3129345, status ); */

/* Read the input error message stack level */
   emsLevel( &emslev1 );

/* Obtain the command from the environment.  This returns uppercase names. */
   taskGetName( name, sizeof(name), status );

/* Update the application name in the NDF history recording
   to include the version number of the application */
   snprintf( appname, NDF__SZAPP, "%-*s (%s V%s)", PAR__SZNAM,
             name, PACKAGE_UPCASE, PACKAGE_VERSION);
   ndfHappn( appname, status );

/* Make AST use the same variable for its inherited status. */
   astWatch( status );

/* Tell AST to re-cycle memory when possible. */
   ast_caching = astTune( "MemoryCaching", 1 );

/* Get the GRP and HDS status for leak checking - need the task name
   to mask out parameter names. Also need to mask out the monlith name */
   one_strlcpy( filter, "!CUPID_MON,!", sizeof(filter), status);
   one_strlcat( filter, name, sizeof(filter), status );
   grpInfoi( NULL, 0, "NGRP", &ngrp0, status );
   hdsInfoI( NULL, "LOCATORS", filter, &nloc0, status );

/* Begin a provenance block. This causes event handlers to be registered
   with the NDF library so that a handler routine in NDG is called every
   time an NDF is opened. This handler routine keeps a record of all
   NDFs that are opened for input or output, until the block is closed
   by calling ndgEndpv. */
   ndgBegpv( status );

/* Begin a GRP NDF history block. This causes the contents of GRP groups
   to be appended to default history text added to any NDFs during the
   block. */
   ndgBeggh( status );

/* Check the string against valid A-task names---if matched then call
   the relevant A-task. */

/* Finds a low frequency background surface. */
   if( !strcmp( name, "FINDBACK" ) ) {
      findback( status );

/* Identifies emission clumps within a 2- or 3D NDF. */
   } else if( !strcmp( name, "FINDCLUMPS" ) ) {
      findclumps( status );

/* Give help on CUPID commands. */
   } else if( !strcmp( name, "CUPIDHELP" ) ) {
      cupidhelp( status );

/* Create simulated data containing clumps and noise. */
   } else if( !strcmp( name, "MAKECLUMPS" ) ) {
      makeclumps( status );

/* Extract clump parameters from another image */
   } else if( !strcmp( name, "EXTRACTCLUMPS" ) ) {
      extractclumps( status );

/* Obtain information about one or more clumps. */
   } else if( !strcmp( name, "CLUMPINFO" ) ) {
      clumpinfo( status );

/* Report an error if the command name is not recognised. */
   } else if( *status == SAI__OK ) {
      *status = SAI__ERROR;
      errRep( "CUPID_MON_NOCOM", "CUPID: No such command ^CMD.", status );
   }

/* End the GRP NDF history block. */
   ndgEndgh( status );

/* End the provenance block. This will result in every output NDF being
   given a provenance extension containing a record of the input NDFs
   that the application accessed in order to create the output NDF. Any
   output NDF that already contains a provenance extension is left
   unchanged (so individual application can override this automatic
   provenance handling by adding a provenance extension to the output
   NDF itself). */
   sprintf( buff, "CUPID:%s", name );
   ndgEndpv( buff, status );

/* Re-instate the original value of the AST ObjectCaching tuning
   parameter. */
   astTune( "MemoryCaching", ast_caching );

/* Check for GRP leaks Do this in a new error reporting context so
   that we get the correct value even if an error has occurred. */
   errBegin( status );
   grpInfoi( NULL, 0, "NGRP", &ngrp1, status );

/* If there are more active groups now than there were on entry,
   there must be a problem (GRP identifiers are not being freed
   somewhere). So report it. */
   if (*status == SAI__OK && ngrp1 > ngrp0) {
     msgBlank( status );
     msgSetc( "NAME", name );
     msgSeti( "NGRP0", ngrp0 );
     msgSeti( "NGRP1", ngrp1 );
     msgOut( " ", "WARNING: The number of active "
             "GRP identifiers increased from ^NGRP0 to ^NGRP1 "
             "during execution of ^NAME (" PACKAGE_UPCASE " programming "
             " error).", status);
     msgBlank(status);
     grpWatch( 0, status );
   }
   errEnd( status );

/* Check for HDS leaks Do this in a new error reporting context so
   that we get the correct value even if an error has occurred. */
   errBegin( status );
   hdsInfoI( NULL, "LOCATORS", filter, &nloc1, status );

/* If there are more active locators now than there were on entry,
   there must be a problem (HDS locators are not being freed
   somewhere). So report it. */
   if (*status == SAI__OK && nloc1 > nloc0) {
     msgBlank( status );
     msgSetc( "NAME", name );
     msgSeti( "NLOC0", nloc0 );
     msgSeti( "NLOC1", nloc1 );
     msgOut( " ", "WARNING: The number of active "
             "HDS Locators increased from ^NLOC0 to ^NLOC1 "
             "during execution of ^NAME (" PACKAGE_UPCASE " programming "
             " error).", status);
     msgBlank(status);
     hdsShow("LOCATORS", status);
     hdsShow("FILES", status);
   }
   errEnd( status );

/* Read the exitt error message stack level */
   emsLevel( &emslev2 );

   if (*status == SAI__OK && emslev1 != emslev2 ) {
     errMark();
     msgBlank( status );
     msgSetc( "NAME", name );
     msgSeti( "LV1", emslev1);
     msgSeti( "LV2", emslev2);
     msgOut( " ", "WARNING: EMS Stack level went from ^LV1 to ^LV2"
             " during execution of ^NAME (" PACKAGE_UPCASE " programming"
             " error).", status );
     msgBlank(status);
     errRlse();
   }

/* Make AST use its own internal variable for its inherited status. */
   astWatch( NULL );

/* Clear out any remaining memory allocated by AST and report
   unintentional leaks. */
   astFlushMemory( 1 );

}
예제 #6
0
void smf_write_flagmap( ThrWorkForce *wf, smf_qual_t mask, smfArray *lut, smfArray *qua,
                        smfDIMMData *dat, const Grp *flagrootgrp,
                        size_t contchunk, const int *lbnd_out,
                        const int *ubnd_out, AstFrameSet *outfset,
                        int *status ) {

  AstFrameSet *tfset;          /* Temporary FrameSet pointer */
  Grp *mgrp=NULL;               /* Temporary group for map names */
  char *pname=NULL;             /* Poiner to name */
  char name[GRP__SZNAM+1];      /* Buffer for storing names */
  char tempstr[20];             /* Temporary string */
  char tmpname[GRP__SZNAM+1];   /* temp name buffer */
  dim_t nbolo;                  /* Number of bolometers */
  dim_t ntslice;                /* Number of time slices */
  double shift[ 1 ];            /* Shift from GRID to bit number */
  int *flagmap=NULL;            /* pointer to flagmap data */
  int *lut_data=NULL;           /* Pointer to DATA component of lut */
  int ibit;                     /* Quality bit number */
  int lbnd3d[3];                /* Lower bounds for 3D output */
  int npix;                     /* Number of pixels per plane */
  int target;                   /* Target value for incrementing pixel count */
  int ubnd3d[3];                /* Upper bounds for 3D output */
  size_t bstride;               /* Bolometer stride */
  size_t i;                     /* loop counter */
  size_t idx=0;                 /* index within subgroup */
  size_t ii;                    /* array offset index */
  size_t j;                     /* loop counter */
  size_t tstride;               /* Time stride */
  smfData *mapdata=NULL;        /* smfData for new map */
  smf_qual_t *qua_data=NULL;    /* Pointer to DATA component of qua */

  if( *status != SAI__OK ) return;

  if( !lut || !qua || !dat || !flagrootgrp || !lbnd_out || !ubnd_out ||
      !outfset ) {
    *status = SAI__ERROR;
    errRep( "", FUNC_NAME ": NULL inputs supplied", status );
    return;
  }

  /* Create a name for the flagmap, taking into account the chunk
     number. Only required if we are using a single output
     container. */
  pname = tmpname;
  grpGet( flagrootgrp, 1, 1, &pname, sizeof(tmpname), status );
  one_strlcpy( name, tmpname, sizeof(name), status );
  one_strlcat( name, ".", sizeof(name), status );

  sprintf(tempstr, "CH%02zd", contchunk);
  one_strlcat( name, tempstr, sizeof(name), status );
  mgrp = grpNew( "flagmap", status );
  grpPut1( mgrp, name, 0, status );

  msgOutf( "", "*** Writing flagmap %s", status, name );

  /* If a non-zero mask value wassupplied, the flagmap is 2-dimensional
     and each pixel value counts the number of samples flagged by any of
     the qualities included in the mask. */
  if( mask ) {

     smf_open_newfile( wf, mgrp, 1, SMF__INTEGER, 2, lbnd_out, ubnd_out, 0, &mapdata,
                       status);
     flagmap = mapdata->pntr[0];

     /* Loop over subgroup index (subarray) */
     for( idx=0; (idx<qua->ndat)&&(*status==SAI__OK); idx++ ) {

          smf_get_dims( qua->sdata[idx], NULL, NULL, &nbolo, &ntslice,
                        NULL, &bstride, &tstride, status );
          qua_data = (qua->sdata[idx]->pntr)[0];
          lut_data = (lut->sdata[idx]->pntr)[0];

          /* Loop over bolometer and time slice and create map */
          for( i=0; i<nbolo; i++ ) {
            /* Skip bolometers only if SMF__Q_BADB is set both in the
               data and the mask */
            if( !(qua_data[i*bstride] & mask & SMF__Q_BADB) ) {
              for( j=0; j<ntslice; j++ ) {
                ii = i*bstride + j*tstride;
                if( (qua_data[ii] & mask) && (lut_data[ii] != VAL__BADI) ) {
                  flagmap[lut_data[ii]]++;
                }
              }
            }
          }
        }

     /* Write WCS */
     smf_set_moving( (AstFrame *) outfset, NULL, status );
     ndfPtwcs( outfset, mapdata->file->ndfid, status );

  /* If the mask is zero, the flagmap is 3-dimensional and contains a
     plane for each quality bit, plus an additional plane (plane 1)
     containing the number of unflagged samples in each pixel. */
  } else {
     lbnd3d[ 0 ] = lbnd_out[ 0 ];
     lbnd3d[ 1 ] = lbnd_out[ 1 ];
     lbnd3d[ 2 ] = -1;
     ubnd3d[ 0 ] = ubnd_out[ 0 ];
     ubnd3d[ 1 ] = ubnd_out[ 1 ];
     ubnd3d[ 2 ] = SMF__NQBITS_TSERIES - 1;

     smf_open_newfile( wf, mgrp, 1, SMF__INTEGER, 3, lbnd3d, ubnd3d, 0,
                       &mapdata, status);
     flagmap = mapdata->pntr[0];

     /* No. of pixels in one plane */
     npix = ( ubnd3d[ 1 ] - lbnd3d[ 1 ] + 1 )*( ubnd3d[ 0 ] - lbnd3d[ 0 ] + 1 );

     /* Loop over each quality bit (-1 == "no flags"). */
     for( ibit = -1; ibit < SMF__NQBITS_TSERIES; ibit++ ) {

        /* The test of each sample is performed by checking if the
           sample's quality value ANDed with "mask" is equal to "target".
           This is requires since ibit==-1 (i.e. "count all samples that
           have no flags set") requires a different logic to the other
           ibit values. */
        if( ibit == -1 ) {
           mask = SMF__Q_GOOD;
           target = 0;
        } else {
           mask = BIT_TO_VAL(ibit);
           target = mask;
        }

        /* Loop over subgroup index (subarray) */
        for( idx=0; (idx<qua->ndat)&&(*status==SAI__OK); idx++ ) {

           smf_get_dims( qua->sdata[idx], NULL, NULL, &nbolo, &ntslice,
                           NULL, &bstride, &tstride, status );
           qua_data = (qua->sdata[idx]->pntr)[0];
           lut_data = (lut->sdata[idx]->pntr)[0];

           /* Loop over bolometer and time slice and create map */
           for( i=0; i<nbolo; i++ ) {

              /* Skip bolometers only if SMF__Q_BADB is set both in the
                 data and the mask */
              for( j=0; j<ntslice; j++ ) {
                 ii = i*bstride + j*tstride;
                 if( ( (qua_data[ii] & mask) == target ) &&
                     (lut_data[ii] != VAL__BADI) ) {
                   flagmap[lut_data[ii]]++;
                 }
              }
           }
        }

        /* Move the pointer on to th enext plane. */
        flagmap += npix;

     /* Next quality bit. */
     }

     /* Take a copy of the supplied FrameSet so we do not modify it. */
     tfset = astCopy( outfset );

     /* Set atributes for moving target if necessary. */
     smf_set_moving( (AstFrame *) tfset, NULL, status );

     /* Modify the WCS FrameSet so that the base and current Frames are
        3-dimensional. The current Frame is expanded by adding in a simple
        1D Frame representing quality bit, and the base Frame is expanded
        by adding in a 3rd GRID axis. Other Frames are left unchanged.
        The quality bit Frame and the new GRID axis are connected using
        a ShiftMap that gives the right zero-based bit numbers (which
        also correspond to PIXEL indices). */
     shift[ 0 ] = -2.0;
     atlAddWcsAxis( tfset, (AstMapping *) astShiftMap( 1, shift, " " ),
                    astFrame( 1, "Label(1)=Quality bit,Domain=QUALITY" ),
                    NULL, NULL, status );

     /* Store the FrameSet in the 3D NDF. */
     ndfPtwcs( tfset, mapdata->file->ndfid, status );

     tfset = astAnnul( tfset );
  }

  /* Clean up */
  if( mgrp ) grpDelet( &mgrp, status );
  smf_close_file( wf, &mapdata, status );

}
예제 #7
0
void smf_write_itermap( ThrWorkForce *wf, const double *map, const double *mapvar,
                        const smf_qual_t *mapqua, dim_t msize,
                        const Grp *iterrootgrp, size_t contchunk, int iter,
                        const int *lbnd_out, const int *ubnd_out,
                        AstFrameSet *outfset, const smfHead *hdr,
                        const smfArray *qua, int *status ) {

  int flags;                  /* Flags indicating required NDF components */
  Grp *mgrp=NULL;             /* Temporary group to hold map name */
  smfData *imapdata=NULL;     /* smfData for this iteration map */
  char name[GRP__SZNAM+1];    /* Buffer for storing name */
  char *pname=NULL;           /* Poiner to name */
  char tmpname[GRP__SZNAM+1]; /* temp name buffer */
  char tempstr[20];

  if( *status != SAI__OK ) return;

  if( !map || !mapvar || !iterrootgrp || !lbnd_out || !ubnd_out || !outfset ) {
    *status = SAI__ERROR;
    errRep( "", FUNC_NAME ": NULL inputs supplied", status );
    return;
  }

  if( hdr && !qua ) {
    *status = SAI__ERROR;
    errRep( "", FUNC_NAME ": hdr supplied but qua is NULL", status );
    return;
  }

  /* Create a name for this iteration map, take into
     account the chunk number. Only required if we are
     using a single output container. */

  pname = tmpname;
  grpGet( iterrootgrp, 1, 1, &pname, sizeof(tmpname), status );
  one_strlcpy( name, tmpname, sizeof(name), status );
  one_strlcat( name, ".", sizeof(name), status );

  /* Continuous chunk number */
  sprintf(tempstr, "CH%02zd", contchunk);
  one_strlcat( name, tempstr, sizeof(name), status );

  /* Iteration number */
  sprintf( tempstr, "I%03i", iter+1 );
  one_strlcat( name, tempstr, sizeof(name), status );
  mgrp = grpNew( "itermap", status );
  grpPut1( mgrp, name, 0, status );

  msgOutf( "", "*** Writing map from this iteration to %s", status,
           name );

  flags = SMF__MAP_VAR;
  if( mapqua ) flags |= SMF__MAP_QUAL;

  smf_open_newfile ( wf, mgrp, 1, SMF__DOUBLE, 2, lbnd_out,
                     ubnd_out, flags, &imapdata, status);

  /* Copy over the signal and variance maps */
  if( *status == SAI__OK ) {
    memcpy( imapdata->pntr[0], map, msize*sizeof(*map) );
    memcpy( imapdata->pntr[1], mapvar, msize*sizeof(*mapvar) );
    if( mapqua ) memcpy( imapdata->qual, mapqua, msize*sizeof(*mapqua) );
  }

  /* Write out a FITS header */
  if( (*status == SAI__OK) && hdr && hdr->allState ) {
    AstFitsChan *fitschan=NULL;
    JCMTState *allState = hdr->allState;
    char *obsidss=NULL;
    char obsidssbuf[SZFITSTR];
    double iter_nboloeff;
    size_t nmap;
    size_t ngood_tslices;
    dim_t ntslice;                /* Number of time slices */

    fitschan = astFitsChan ( NULL, NULL, " " );

    obsidss = smf_getobsidss( hdr->fitshdr,
                              NULL, 0, obsidssbuf,
                              sizeof(obsidssbuf), status );
    if( obsidss ) {
      atlPtfts( fitschan, "OBSIDSS", obsidss,
                "Unique observation subsys identifier", status );
    }
    atlPtfti( fitschan, "SEQSTART", allState[0].rts_num,
              "RTS index number of first frame", status );

    ntslice = hdr->nframes;

    atlPtfti( fitschan, "SEQEND", allState[ntslice-1].rts_num,
              "RTS index number of last frame", status );

    /* calculate the effective number of bolometers for this
       iteration */
    smf_qualstats_model( wf, SMF__QFAM_TSERIES, 1, qua, NULL, NULL, &nmap,
                         NULL, NULL, &ngood_tslices, NULL, NULL, status );

    iter_nboloeff = (double)nmap / (double)ngood_tslices;
    atlPtftd( fitschan, "NBOLOEFF", iter_nboloeff,
              "Effective bolometer count", status );

    kpgPtfts( imapdata->file->ndfid, fitschan, status );

    if( fitschan ) fitschan = astAnnul( fitschan );
  }

  /* Write WCS (protecting the pointer dereference) */
  smf_set_moving(outfset,NULL,status);
  if (*status == SAI__OK && imapdata) {
    ndfPtwcs( outfset, imapdata->file->ndfid, status );
  }

  /* Clean up */
  if( mgrp ) grpDelet( &mgrp, status );
  smf_close_file( wf, &imapdata, status );
}
예제 #8
0
void smf_write_bolomap( ThrWorkForce *wf, smfArray *res, smfArray *lut,
                        smfArray *qua, smfDIMMData *dat, dim_t msize,
                        const Grp *bolrootgrp, int varmapmethod,
                        const int *lbnd_out, const int *ubnd_out,
                        AstFrameSet *outfset, int *status ) {

  int addtomap=0;               /* Set if adding to existing map */
  size_t bstride;               /* Bolometer stride */
  double *curmap=NULL;          /* Pointer to current map being rebinned */
  double *curvar=NULL;          /* Pointer to variance associate with curmap */
  dim_t dsize;                  /* Size of data arrays in containers */
  size_t idx=0;                 /* index within subgroup */
  size_t k;                     /* loop counter */
  int *lut_data=NULL;           /* Pointer to DATA component of lut */
  char name[GRP__SZNAM+1];      /* Buffer for storing names */
  dim_t nbolo;                  /* Number of bolometers */
  size_t nbolomaps = 0;         /* Number of bolomaps written */
  char *pname=NULL;             /* Poiner to name */
  smf_qual_t *qua_data=NULL;    /* Pointer to DATA component of qua */
  double *res_data=NULL;        /* Pointer to DATA component of res */

  if( *status != SAI__OK ) return;

  if( !res || !lut || !qua || !dat || !bolrootgrp ||
      !lbnd_out || !ubnd_out || !outfset ) {
    *status = SAI__ERROR;
    errRep( "", FUNC_NAME ": NULL inputs supplied", status );
    return;
  }

  /* Loop over subgroup index (subarray) */
  for( idx=0; idx<res->ndat; idx++ ) {
    smf_qual_t *bolomask = NULL;
    double *bmapweight = NULL;
    double *bmapweightsq = NULL;
    int *bhitsmap = NULL;

    /* Pointers to everything we need */
    res_data = res->sdata[idx]->pntr[0];
    lut_data = lut->sdata[idx]->pntr[0];
    qua_data = qua->sdata[idx]->pntr[0];

    smf_get_dims( res->sdata[idx], NULL, NULL, &nbolo, NULL,
                  &dsize, &bstride, NULL, status );

    /* Make a copy of the quality at first time slice as a good
       bolo mask, and then set quality to SMF__Q_BADB. Later we
       will unset BADB for one bolo at a time to make individual
       maps. */

    bolomask = astMalloc( nbolo*sizeof(*bolomask) );
    bmapweight = astMalloc( msize*sizeof(*bmapweight) );
    bmapweightsq = astMalloc( msize*sizeof(*bmapweightsq) );
    bhitsmap = astMalloc( msize*sizeof(*bhitsmap) );

    if( *status == SAI__OK ) {
      for( k=0; k<nbolo; k++ ) {
        bolomask[k] = qua_data[k*bstride];
        qua_data[k*bstride] = SMF__Q_BADB;
      }

      /* Identify good bolos in the copied mask and produce a map */
      for( k=0; (k<nbolo)&&(*status==SAI__OK); k++ ) {
        if( !(bolomask[k]&SMF__Q_BADB) ) {
          Grp *mgrp=NULL;       /* Temporary group to hold map names */
          smfData *mapdata=NULL;/* smfData for new map */
          char tmpname[GRP__SZNAM+1]; /* temp name buffer */
          char thisbol[20];     /* name particular to this bolometer */
          size_t col, row;
          char subarray[10];

          nbolomaps++;

          /* Set the quality back to good for this single bolometer */
          qua_data[k*bstride] = bolomask[k];

          /* Create a name for the new map, take into account the
             chunk number and subarray. Only required if we are using a single
             output container. */
          pname = tmpname;
          grpGet( bolrootgrp, 1, 1, &pname, sizeof(tmpname), status );
          one_strlcpy( name, tmpname, sizeof(name), status );
          one_strlcat( name, ".", sizeof(name), status );

          /* Subarray, column and row. HDS does not care about case but we
             convert to upper case anyhow. */
          smf_find_subarray( res->sdata[idx]->hdr, subarray, sizeof(subarray),
                             NULL, status );
          if (*status == SAI__OK) {
            size_t len = strlen(subarray);
            size_t n = 0;
            for (n=0; n<len; n++) {
              subarray[n] = toupper(subarray[n]);
            }
          }

          col = (k % res->sdata[idx]->dims[1])+1;
          row = (k / res->sdata[idx]->dims[1])+1;

          sprintf( thisbol, "%3sC%02zuR%02zu",
                   subarray,
                   col,   /* x-coord */
                   row ); /* y-coord */

          one_strlcat( name, thisbol, sizeof(name), status );
          mgrp = grpNew( "bolomap", status );
          grpPut1( mgrp, name, 0, status );

          msgOutf( "", "*** Writing single bolo map %s", status,
                   name );

          /* Try to open an existing extention first. Create a new map
             array, and then later we'll add it to the existing
             one. If it isn't there, create it. */

          smf_open_file( mgrp, 1, "UPDATE", 0, &mapdata, status );

          if( *status == SAI__OK ) {
            /* Allocate memory for the new rebinned data */
            curmap = astCalloc( msize, sizeof(*curmap) );
            curvar = astCalloc( msize, sizeof(*curvar) );
            addtomap = 1;
          } else if( *status == DAT__NAMIN ) {
            /* Create a new extension */
            errAnnul( status );
            smf_open_newfile ( mgrp, 1, SMF__DOUBLE, 2, lbnd_out,
                               ubnd_out, SMF__MAP_VAR, &mapdata, status);

            /* Rebin directly into the newly mapped space */
            if( *status == SAI__OK ) {
              curmap = mapdata->pntr[0];
              curvar = mapdata->pntr[1];
              addtomap = 0;
            }
          }

          /* Rebin the data for this single bolometer. Don't care
             about variance weighting because all samples from
             same detector are about the same. */

          smf_rebinmap1( wf, res->sdata[idx],
                         dat->noi ? dat->noi[0]->sdata[idx] : NULL,
                         lut_data, 0, 0, 0, NULL, 0,
                         SMF__Q_GOOD, varmapmethod,
                         AST__REBININIT | AST__REBINEND,
                         curmap, bmapweight, bmapweightsq, bhitsmap,
                         curvar, msize, NULL, status );

          /* If required, add this new map to the existing one */
          if( addtomap ) {
            size_t i;
            double *oldmap=NULL;
            double *oldvar=NULL;
            double weight;

            if( *status == SAI__OK ) {

              oldmap = mapdata->pntr[0];
              oldvar = mapdata->pntr[1];

              for( i=0; i<msize; i++ ) {
                if( oldmap[i]==VAL__BADD ) {
                  /* No data in this pixel in the old map, just copy */
                  oldmap[i] = curmap[i];
                  oldvar[i] = curvar[i];
                } else if( curmap[i]!=VAL__BADD &&
                           oldvar[i]!=VAL__BADD && oldvar[i]!=0 &&
                           curvar[i]!=VAL__BADD && curvar[i]!=0 ) {
                  /* Both old and new values available */
                  weight = 1/oldvar[i] + 1/curvar[i];
                  oldmap[i] = (oldmap[i]/oldvar[i] + curmap[i]/curvar[i]) /
                    weight;
                  oldvar[i] = 1/weight;
                }
              }
            }

            /* Free up temporary arrays */
            curmap = astFree( curmap );
            curvar = astFree( curvar );
          }

          /* Write out COLNUM and ROWNUM to FITS header */
          if( *status == SAI__OK ) {
            AstFitsChan *fitschan=NULL;

            fitschan = astFitsChan ( NULL, NULL, " " );

            atlPtfti( fitschan, "COLNUM", col, "bolometer column", status);
            atlPtfti( fitschan, "ROWNUM", row, "bolometer row", status );
            atlPtfts( fitschan, "SUBARRAY", subarray, "Subarray identifier",
                      status );
            kpgPtfts( mapdata->file->ndfid, fitschan, status );

            if( fitschan ) fitschan = astAnnul( fitschan );


            /* Set the bolo to bad quality again */
            qua_data[k*bstride] = SMF__Q_BADB;

            /* Write WCS */
            smf_set_moving(outfset,NULL,status);
            ndfPtwcs( outfset, mapdata->file->ndfid, status );
          }

          /* Clean up */
          if( mgrp ) grpDelet( &mgrp, status );
          if( mapdata ) smf_close_file( &mapdata, status );

        }
      }

      /* Set quality back to its original state */
      for( k=0; k<nbolo; k++ ) {
        qua_data[k*bstride] = bolomask[k];
      }
    }

    /* Free up memory */
    bolomask = astFree( bolomask );
    bmapweight = astFree( bmapweight );
    bmapweightsq = astFree( bmapweightsq );
    bhitsmap = astFree( bhitsmap );
  }

  msgOutf( "", "*** Wrote %zu bolo maps", status, nbolomaps );

}
예제 #9
0
void smurf_mon( int * status ) {

  /* Local variables */
  char taskname[PAR__SZNAM+1];
  char appname[NDF__SZAPP+1];
  char filter[PAR__SZNAM+PAR__SZNAM+1];
  int ngrp0;                   /* Number of grp ids at start */
  int ngrp1;                   /* Number of grp ids at end */
  int nloc0;                   /* Number of active HDS Locators at start */
  int nloc1;                   /* Number of active HDS Locators at end */
  int memory_caching;          /* Is AST current caching unused memory? */
  int emslev1;                 /* EMS level on entry */
  int emslev2;                 /* EMS level on exit */

  if ( *status != SAI__OK ) return;

  /* Read the input error message stack level */
  emsLevel( &emslev1 );

  /* Initialise AST */
  astBegin;
  memory_caching = astTune( "MemoryCaching", 1 );

  /* Register our status variable with AST */
  astWatch( status );

  /* If we are watching a particular memory Id reported by astActiveMemory
     we set the watch point here. */
  /* astWatchMemory( 29 ); */

  /* For debugging, watch one of the leaked GRP identifiers listed by the
     call to grpWatch at the end of this routine (if any). */
  /* grpWatch( 3129345, status ); */

  /* Mark any currently active NDF parameters, so that they will
     not be cancelled by the call to ndfCancl at the end of this
     function. */
  ndfCancl( "*", status );

  /* Find out the task name and provenance name we were invoked with */
  smf_get_taskname( taskname, NULL, status );

  /* Get the GRP and HDS status for leak checking - need the task name
     to mask out parameter names. Also need to mask out the monlith name */
  one_strlcpy( filter, "!SMURF_MON,!", sizeof(filter), status);
  one_strlcat( filter, taskname, sizeof(filter), status );
  grpInfoi( NULL, 0, "NGRP", &ngrp0, status );
  hdsInfoI( NULL, "LOCATORS", filter, &nloc0, status );


  /* Update the application name in the NDF history recording
     to include the version number of the application */
  snprintf( appname, NDF__SZAPP, "%-*s (%s V%s)", PAR__SZNAM,
            taskname, PACKAGE_UPCASE, PACKAGE_VERSION);
  ndfHappn( appname, status );

  /* Begin a GRP NDF history block. This causes the contents of GRP
     groups to be appended to default history text added to any NDFs
     during the block. */
  ndgBeggh( status );



  /* Call the subroutine associated with the requested task */
  if (strcmp( taskname, "BADBOLOS" ) == 0 ) {
    smurf_extinction( status );
  } else if (strcmp( taskname, "CALCDARK" ) == 0 ) {
    smurf_calcdark( status );
  } else if (strcmp( taskname, "CALCFLAT" ) == 0 ) {
    smurf_calcflat( status );
  } else if (strcmp( taskname, "CALCNOISE" ) == 0 ) {
    smurf_calcnoise( status );
  } else if (strcmp( taskname, "CALCQU" ) == 0 ) {
    smurf_calcqu( status );
  } else if (strcmp( taskname, "CALCRESP" ) == 0 ) {
    smurf_calcresp( status );
  } else if (strcmp( taskname, "COPYFLAT" ) == 0 ) {
    smurf_copyflat( status );
  } else if (strcmp( taskname, "DREAMSOLVE" ) == 0 ) {
    smurf_dreamsolve( status );
  } else if (strcmp( taskname, "DREAMWEIGHTS" ) == 0 ) {
    smurf_dreamweights( status );
  } else if (strcmp( taskname, "DSUTILS" ) == 0 ) {
    smurf_dsutils( status );
  } else if (strcmp( taskname, "EXTINCTION" ) == 0 ) {
    smurf_extinction( status );
  } else if (strcmp( taskname, "FIT1D" ) == 0 ) {
    smurf_fit1d( status );
  } else if (strcmp( taskname, "FIXSTEPS" ) == 0 ) {
    smurf_fixsteps( status );
  } else if (strcmp( taskname, "FLATFIELD" ) == 0 ) {
    smurf_flatfield( status );
  } else if (strcmp( taskname, "FTS2DEGLITCH" ) == 0 ) {
    smurf_fts2_deglitch( status );
  } else if (strcmp( taskname, "FTS2FLATFIELD" ) == 0 ) {
    smurf_fts2_flatfield( status );
  } else if (strcmp( taskname, "FTS2FREQCORR" ) == 0 ) {
    smurf_fts2_freqcorr( status );
  } else if (strcmp( taskname, "FTS2SPLIT" ) == 0 ) {
    smurf_fts2_split( status );
  } else if (strcmp( taskname, "FTS2INIT" ) == 0 ) {
    smurf_fts2_init( status );
  } else if (strcmp( taskname, "FTS2MASKMAP" ) == 0 ) {
    smurf_fts2_maskmap( status );
  } else if (strcmp( taskname, "FTS2OPCORR" ) == 0 ) {
    smurf_fts2_spatialwcs( status );
  } else if (strcmp( taskname, "FTS2PHASECORR" ) == 0 ) {
    smurf_fts2_phasecorr( status );
  } else if (strcmp( taskname, "FTS2PHASECORRDS" ) == 0 ) {
    smurf_fts2_phasecorrds( status );
  } else if (strcmp( taskname, "FTS2PORTIMBAL" ) == 0 ) {
    smurf_fts2_portimbal( status );
  } else if (strcmp( taskname, "FTS2REMOVEBSE" ) == 0 ) {
    smurf_fts2_removebse( status );
  } else if (strcmp( taskname, "FTS2SPECTRUM" ) == 0 ) {
    smurf_fts2_spectrum( status );
  } else if (strcmp( taskname, "FTS2TRANSCORR" ) == 0 ) {
    smurf_fts2_transcorr( status );
  } else if (strcmp( taskname, "GSD2ACSIS" ) == 0 ) {
    smurf_gsd2acsis( status );
  } else if (strcmp( taskname, "GSDSHOW" ) == 0 ) {
    smurf_gsdshow( status );
  } else if (strcmp( taskname, "IMPAZTEC" ) == 0 ) {
    smurf_impaztec( status );
  } else if (strcmp( taskname, "MAKECUBE" ) == 0 ) {
    smurf_makecube( status );
  } else if (strcmp( taskname, "MAKEMAP" ) == 0 ) {
    smurf_makemap( status );
  } else if (strcmp( taskname, "RAWFIXMETA" ) == 0 ) {
    smurf_rawfixmeta( status );
  } else if (strcmp( taskname, "RAWPRESS" ) == 0 ) {
    smurf_rawpress( status );
  } else if (strcmp( taskname, "RAWRECREATEWCS" ) == 0 ) {
    smurf_rawrecreatewcs( status );
  } else if (strcmp( taskname, "RAWREWRTSC2WCS" ) == 0 ) {
    smurf_rawrewrtsc2wcs( status );
  } else if (strcmp( taskname, "RAWUNPRESS" ) == 0 ) {
    smurf_rawunpress( status );
  } else if (strcmp( taskname, "REMSKY" ) == 0 ) {
    smurf_remsky( status );
  } else if (strcmp( taskname, "SC2CLEAN" ) == 0 ) {
    smurf_sc2clean( status );
  } else if (strcmp( taskname, "SC2CONCAT" ) == 0 ) {
    smurf_sc2concat( status );
  } else if (strcmp( taskname, "SC2EXPANDMODEL" ) == 0 ) {
    smurf_sc2expandmodel( status );
  } else if (strcmp( taskname, "SC2FFT" ) == 0 ) {
    smurf_sc2fft( status );
  } else if (strcmp( taskname, "SC2FILTERMAP" ) == 0 ) {
    smurf_sc2filtermap( status );
  } else if (strcmp( taskname, "SC2MAPFFT" ) == 0 ) {
    smurf_sc2mapfft( status );
  } else if (strcmp( taskname, "SC2PCA" ) == 0 ) {
    smurf_sc2pca( status );
  } else if (strcmp( taskname, "SC2SIM" ) == 0 ) {
    smurf_sc2sim( status );
  } else if (strcmp( taskname, "SC2THREADTEST" ) == 0 ) {
    smurf_sc2threadtest( status );
  } else if (strcmp( taskname, "SKYNOISE" ) == 0 ) {
    smurf_skynoise( status );
  } else if (strcmp( taskname, "SMURFCOPY" ) == 0 ) {
    smurf_smurfcopy( status );
  } else if (strcmp( taskname, "SMURFHELP" ) == 0 ) {
    smurf_smurfhelp( status );
  } else if (strcmp( taskname, "STACKFRAMES" ) == 0 ) {
    smurf_stackframes( status );
  } else if (strcmp( taskname, "STARECALC" ) == 0 ) {
    smurf_starecalc( status );
  } else if (strcmp( taskname, "TILEINFO" ) == 0 ) {
    smurf_tileinfo( status );
  } else if (strcmp( taskname, "TILELIST" ) == 0 ) {
    smurf_tilelist( status );
  } else if (strcmp( taskname, "TIMESORT" ) == 0 ) {
    smurf_timesort( status );
  } else if (strcmp( taskname, "UNMAKECUBE" ) == 0 ) {
    smurf_unmakecube( status );
  } else if (strcmp( taskname, "UNMAKEMAP" ) == 0 ) {
    smurf_unmakemap( status );
  } else {
    *status = SAI__ERROR;
    msgSetc( "TASK", taskname );
    errRep( "smurf_mon", "Unrecognized taskname: ^TASK", status);
  }


  /* End the GRP NDF history block. */
  ndgEndgh( status );

  /* Clear cached info from sc2ast_createwcs. */
  sc2ast_createwcs(SC2AST__NULLSUB, NULL, NULL, NULL, NO_FTS, NULL, status);

  /* Clear WVM caches (one for each thread). */
  smf_calc_wvm_clear( status );

  /* Free AST resources */
  astTune( "MemoryCaching", memory_caching );
  astEnd;

  /* Check for GRP leaks Do this in a new error reporting context so
   * that we get the correct value even if an error has occurred. */
  errBegin( status );
  grpInfoi( NULL, 0, "NGRP", &ngrp1, status );

  /* If there are more active groups now than there were on entry,
   * there must be a problem (GRP identifiers are not being freed
   * somewhere). So report it. */
  if (*status == SAI__OK && ngrp1 > ngrp0) {
    msgBlank( status );
    msgSetc( "NAME", taskname );
    msgSeti( "NGRP0", ngrp0 );
    msgSeti( "NGRP1", ngrp1 );
    msgOut( " ", "WARNING: The number of active "
            "GRP identifiers increased from ^NGRP0 to ^NGRP1 "
            "during execution of ^NAME (" PACKAGE_UPCASE " programming "
            " error).", status);
    msgBlank(status);
    grpWatch( 0, status );
  }
  errEnd( status );

  /* The NDF library registers locators with SUBPAR for any NDFs that
     are opened directly using ndfAssoc or ndfExist. These locators are
     only annulled when the associated parameters are cancelled, but most
     smurf applications do not explicitly cancel their NDF parameters.
     This means that such locators are picked up by the following check
     for dangling HDS locators. In order to prevent this, we cancel any
     remaining NDF parameters now, excluding any that were marked by the
     call to ndfCancl at the start of this routine. */
  ndfCancl( " ", status );

  /* Check for HDS leaks Do this in a new error reporting context so
   * that we get the correct value even if an error has occurred. */
  errBegin( status );
  hdsInfoI( NULL, "LOCATORS", filter, &nloc1, status );

  /* If there are more active locators now than there were on entry,
   * there must be a problem (HDS locators are not being freed
   * somewhere). So report it. */
  if (*status == SAI__OK && nloc1 > nloc0) {
    msgBlank( status );
    msgSetc( "NAME", taskname );
    msgSeti( "NLOC0", nloc0 );
    msgSeti( "NLOC1", nloc1 );
    msgOut( " ", "WARNING: The number of active "
            "HDS Locators increased from ^NLOC0 to ^NLOC1 "
            "during execution of ^NAME (" PACKAGE_UPCASE " programming "
            " error).", status);
    msgBlank(status);
    hdsShow("LOCATORS", status);
    hdsShow("FILES", status);
    printf("filter - %s\n",filter);
  }
  errEnd( status );

  /* Read the exitt error message stack level */
  emsLevel( &emslev2 );

  if (*status == SAI__OK && emslev1 != emslev2 ) {
    errMark();
    msgBlank( status );
    msgSetc( "NAME", taskname );
    msgSeti( "LV1", emslev1);
    msgSeti( "LV2", emslev2);
    msgOut( " ", "WARNING: EMS Stack level went from ^LV1 to ^LV2"
            " during execution of ^NAME (" PACKAGE_UPCASE " programming"
            " error).", status );
    msgBlank(status);
    errRlse();
  }

  /* configure AST --with-memdebug, and uncomment the following lines
     to see how much memory usage SMURF hit at its peak */
  /*
  {
    size_t memcurrent,mempeak;
    astMemoryStats( 0, &mempeak, &memcurrent );
    msgOutf( "", "SMURF: === current /peak memory usage: %zu / %zu MiB ===",
             status, memcurrent/SMF__MIB, mempeak/SMF__MIB );
  }
  */

  /* The astCheckMemory function does nothing unless AST has been compiled
   * with the MEM_DEBUG flag. If this is the case, then it reports the number
   * of memory blocks that have not been freed (useful for identifying memory
   * leaks). Use astActiveMemory() below to list all active memory and
   * then use astWatchMemory() at the start of this routine to get reports
   * when a particular ID is used. Set a breakpoint in the debugger for
   * astMemoryAlarm_
   */
  astActiveMemory("Exit:");
  astCheckMemory;
}
예제 #10
0
void smf_flat_write( smf_flatmeth flatmeth, const char * flatname,
                     double refres, const smfData * bolval,
                     const smfData * powref, const smfData * bolref,
                     const smfData * polyfit, const Grp * prvgrp, int * status ) {

  size_t colsize;              /* number of columns */
  double *dbuf = NULL;         /* input double buffer for mean data */
  double *dvar = NULL;         /* input double buffer for variance of data */
  char fitsrec[SC2STORE__MAXFITS*SZFITSCARD+1]; /* Store for FITS records */
  int *ibuf = NULL;            /* int buffer for mean data */
  int indf = NDF__NOID;        /* NDF identifier for output file */
  size_t ncards;               /* number of fits cards */
  size_t numbols;              /* number of bolometers */
  double *outvar = NULL;       /* buffer for variance of data */
  int place = NDF__NOPL;       /* Dummy placeholder for NDF */
  size_t rowsize;              /* number of rows */
  JCMTState *state = NULL;     /* State for this flatfield */
  sc2ast_subarray_t subnum;    /* subarray number */

  AstFrameSet *result, *spacefset;
  AstLutMap *heatmap;
  AstFrame *heatfrm;


  int *dksquid;           /* pointer to dummy dark SQUID data */
  size_t j;               /* loop counter */
  int jig_vert[1][2];     /* dummy jiggle vertices */
  double jig_path[1][2];  /* dummy jiggle path */
  size_t nframes = 0;     /* Number of frames in bolval */
  int npath = 0;          /* size of jiggle path */
  int nvert = 0;          /* number of jiggle vertices */
  char *xmlfile = NULL;   /* dummy xmlfile name */

  if (*status != SAI__OK) return;

  if (!bolval->da) {
    *status = SAI__ERROR;
    errRep( "", "No flatfield solution provided for writing",
            status );
    return;
  }

  if (!bolval->da->heatval) {
    *status = SAI__ERROR;
    errRep( "", "Must provide heater values in DA struct to smf_flat_write"
            " (possible programming error)", status );
    return;
  }

  /* note that colsize is the number of rows and rowsize is the number of
     columns */
  colsize = (bolval->dims)[SC2STORE__ROW_INDEX];
  rowsize = (bolval->dims)[SC2STORE__COL_INDEX];
  numbols = colsize * rowsize;
  nframes = (bolval->dims)[2];

  /* Make sure we have a FLAT header that reflects this file
     as the flatfield solution */
  smf_fits_updateS( bolval->hdr, "FLAT", flatname, "Name of flat-field file",
                    status );

  /* Create a FITS header for DA */
  smf_fits_export2DA( bolval->hdr->fitshdr, &ncards, fitsrec, status );

  /* Copy the data as integers so it can be written to data file. To
     prevent overflow in the variance we store that as doubles */

  ibuf = astMalloc( (numbols * nframes)*sizeof(*ibuf) );
  outvar = astMalloc( (numbols * nframes)*sizeof(*outvar) );

  dbuf = (bolval->pntr)[0];
  dvar = (bolval->pntr)[1];

  if (*status == SAI__OK) {
    for (j = 0; j < (nframes * numbols); j++) {
      /* These started off as integers so the mean value must fit in
         an integer */
      if ( dbuf[j] == VAL__BADD) {
        ibuf[j] = VAL__BADI;
      } else {
        ibuf[j] = (int)dbuf[j];
      }
      /* Same data type so no need to convert bad values */
      if (dvar) {
        outvar[j] = dvar[j];
      } else {
        outvar[j] = VAL__BADD;
      }
    }
  }

  /* get subarray number */
  smf_find_subarray( bolval->hdr, NULL, 0, &subnum, status );

  /* Create dummy components for output file */
  dksquid = astCalloc ( rowsize* nframes, sizeof(*dksquid) );
  jig_vert[0][0] = 0;
  jig_vert[0][1] = 0;
  jig_path[0][0] = 0.0;
  jig_path[0][1] = 0.0;

  sc2store_setcompflag ( SC2STORE__NONE, status );
  sc2store_wrtstream ( flatname, subnum, ncards,
                       fitsrec, colsize, rowsize, nframes,
                       (bolref->dims)[2], refres, 0, smf_flat_methstring( flatmeth, status ),
                       bolval->hdr->allState, NULL,
                       ibuf, dksquid, (bolref->pntr)[0], (powref->pntr)[0],
                       "FLATCAL", NULL, NULL, jig_vert,
                       nvert, jig_path, npath, xmlfile, status );

  sc2store_free ( status );

  /* To copy in the variance and modify fix up the WCS we need to reopen
     the file */

  ndfOpen( NULL, flatname, "UPDATE", "OLD", &indf, &place, status );

  /* make sure that history is not written twice */
  ndfHsmod( "SKIP", indf, status );

  if (outvar) {
    void *pntr[3];
    int el;
    ndfStype( "_DOUBLE", indf, "VARIANCE", status );
    ndfMap( indf, "VARIANCE", "_DOUBLE", "WRITE", pntr, &el, status );
    if (*status == SAI__OK) {
      memcpy( pntr[0], outvar, sizeof(*outvar)*el );
    }
  }

  /* For the WCS a time frame is less relevant than heater settings */
  astBegin;

  /* Create frame for focal plane coordinates */
  sc2ast_createwcs( subnum, NULL, NULL, NULL, NO_FTS, &spacefset, status );

  /* Copy it to make sure we do not mess with the cache */
  result = astCopy( spacefset );

  /* and switch to BOLO frame which is best for bolometer analysis */
  {
    int frnum = AST__NOFRAME;
    kpg1Asffr( result, "BOLO", &frnum, status );
    if (frnum != AST__NOFRAME) astSetI( result, "CURRENT", frnum );
  }

  /* Create a simple frame for heater settings */
  heatfrm = astFrame( 1, "Domain=HEATER,Label(1)=Heater Setting" );
  heatmap = astLutMap( nframes, bolval->da->heatval, 1.0, 1.0, " " );

  /* Append the heater axis to the spatial frameset */
  atlAddWcsAxis( result, (AstMapping *)heatmap, (AstFrame *) heatfrm,
                 NULL, NULL, status );

  /* write it to the NDF */
  ndfPtwcs( result, indf, status );


  /* Write provenance information */
  if (prvgrp) {
    size_t size = grpGrpsz( prvgrp, status );
    char prvname[ 2 * PAR__SZNAM + 1];

    smf_get_taskname( NULL, prvname, status );
    for (j=1; j<=size; j++) {
      smf_accumulate_prov( NULL, prvgrp, j, indf, prvname, NULL, status );
    }

  }

  /* Write the polynomial expansion into an extension */
  if (polyfit) {
    char fitfile[GRP__SZNAM+1];
    int fndf = NDF__NOID;
    place = NDF__NOPL;
    one_strlcpy( fitfile, flatname, sizeof(fitfile), status );
    one_strlcat( fitfile, ".MORE.SMURF.FLATFIT", sizeof(fitfile), status );

    /* create the file */
    smf_write_smfData( polyfit, NULL, fitfile, NULL, 0, NDF__NOID,
                       MSG__VERB, 0, status );

    /* Same WCS as the main file */
    ndfOpen( NULL, fitfile, "UPDATE", "OLD", &fndf, &place, status );
    ndfPtwcs( result, fndf, status );
    ndfAnnul( &fndf, status );

  }

  astEnd;

  ndfAnnul( &indf, status);

  if (ibuf) ibuf = astFree( ibuf );
  if (outvar) outvar = astFree( outvar );
  if (dksquid) dksquid = astFree( dksquid );
  if (state) state = astFree( state );
}
예제 #11
0
void smf_write_shortmap( ThrWorkForce *wf, int shortmap, smfArray *res,
                         smfArray *lut, smfArray *qua, smfDIMMData *dat,
                         dim_t msize, const Grp *shortrootgrp, size_t contchunk,
                         int varmapmethod, const int *lbnd_out,
                         const int *ubnd_out, AstFrameSet *outfset,
                         int *status ) {

  dim_t dsize;                  /* Size of data arrays in containers */
  size_t i;                     /* loop counter */
  size_t idx=0;                 /* index within subgroup */
  size_t istart;                /* First useful timeslice */
  size_t iend;                  /* Last useful timeslice */
  int *lut_data=NULL;           /* Pointer to DATA component of lut */
  char name[GRP__SZNAM+1];      /* Buffer for storing names */
  size_t nshort=0;              /* Number of short maps */
  dim_t ntslice;                /* Number of time slices */
  char *pname=NULL;             /* Poiner to name */
  smf_qual_t *qua_data=NULL;    /* Pointer to DATA component of qua */
  double *res_data=NULL;        /* Pointer to DATA component of res */
  size_t sc;                    /* Short map counter */
  double *shortmapweight=NULL;  /* buffer for shotmap weights */
  double *shortmapweightsq=NULL;/* buffer for shotmap weights squared */
  int *shorthitsmap=NULL;       /* buffer for shotmap hits */
  size_t shortstart;            /* first time slice of short map */
  size_t shortend;              /* last time slice of short map */
  size_t tstride;               /* Time stride */

  if( *status != SAI__OK ) return;

  if( !res || !lut || !qua || !dat || !shortrootgrp ||
      !lbnd_out || !ubnd_out || !outfset || !shortmap ) {
    *status = SAI__ERROR;
    errRep( "", FUNC_NAME ": NULL inputs supplied", status );
    return;
  }

  if( !res || !res->sdata || !res->sdata[idx] || !res->sdata[idx]->hdr ||
      !res->sdata[idx]->hdr->allState ) {
    *status = SAI__ERROR;
    errRep( "", FUNC_NAME ": RES does not contain JCMTState", status );
    return;
  }

  /* Allocate space for the arrays */
  shortmapweight = astMalloc( msize*sizeof(*shortmapweight) );
  shortmapweightsq = astMalloc( msize*sizeof(*shortmapweightsq) );
  shorthitsmap = astMalloc( msize*sizeof(*shorthitsmap) );

  /* Use first subarray to figure out time dimension. Get the
     useful start and end points of the time series, and then
     determine "nshort" -- the number of complete blocks of
     shortmap time slices in the useful range. */

  smf_get_dims( qua->sdata[0], NULL, NULL, NULL, &ntslice,
                NULL, NULL, &tstride, status );

  qua_data = (qua->sdata[0]->pntr)[0];
  smf_get_goodrange( qua_data, ntslice, tstride, SMF__Q_BOUND,
                     &istart, &iend, status );

  shortstart = istart;

  if( *status == SAI__OK ) {
    if( shortmap == -1 ) {
      nshort = res->sdata[idx]->hdr->allState[iend].tcs_index -
        res->sdata[idx]->hdr->allState[istart].tcs_index + 1;

      msgOutf( "", FUNC_NAME
               ": writing %zu short maps, once each time TCS_INDEX increments",
               status, nshort );
    } else {
      nshort = (iend-istart+1)/shortmap;

      if( nshort ) {
        msgOutf( "", FUNC_NAME
                 ": writing %zu short maps of length %i time slices.",
                 status, nshort, shortmap );
      } else {
        /* Generate warning message if requested short maps are too long*/
        msgOutf( "", FUNC_NAME
                 ": Warning! short maps of lengths %i requested, but "
                 "data only %zu time slices.", status, shortmap,
                 iend-istart+1 );
      }
    }
  }

  /* Loop over short maps */
  for( sc=0; (sc<nshort)&&(*status==SAI__OK); sc++ ) {

    Grp *mgrp=NULL;             /* Temporary group for map names */
    smfData *mapdata=NULL;      /* smfData for new map */
    char tempstr[20];           /* Temporary string */
    char tmpname[GRP__SZNAM+1]; /* temp name buffer */
    char thisshort[20];         /* name particular to this shortmap */

    /* Create a name for the new map, take into account the
       chunk number. Only required if we are using a single
       output container. */
    pname = tmpname;
    grpGet( shortrootgrp, 1, 1, &pname, sizeof(tmpname), status );
    one_strlcpy( name, tmpname, sizeof(name), status );
    one_strlcat( name, ".", sizeof(name), status );

    /* Continuous chunk number */
    sprintf(tempstr, "CH%02zd", contchunk);
    one_strlcat( name, tempstr, sizeof(name), status );

    /* Shortmap number */
    sprintf( thisshort, "SH%06zu", sc );
    one_strlcat( name, thisshort, sizeof(name), status );
    mgrp = grpNew( "shortmap", status );
    grpPut1( mgrp, name, 0, status );

    msgOutf( "", "*** Writing short map (%zu / %zu) %s", status,
             sc+1, nshort, name );

    smf_open_newfile ( wf, mgrp, 1, SMF__DOUBLE, 2, lbnd_out,
                       ubnd_out, SMF__MAP_VAR, &mapdata,
                       status);

    /* Time slice indices for start and end of short map -- common to
       all subarrays */

    if( shortmap > 0) {
      /* Evenly-spaced shortmaps in time */
      shortstart = istart+sc*shortmap;
      shortend = istart+(sc+1)*shortmap-1;
    } else {
      /* One map each time TCS_INDEX increments -- just uses header
         for the first subarray */
      for(i=shortstart+1; (i<=iend) &&
            (res->sdata[0]->hdr->allState[i].tcs_index ==
             res->sdata[0]->hdr->allState[shortstart].tcs_index);
          i++ );
      shortend = i-1;
    }

    /* Bad status if we have invalid shortmap ranges. This might
       happen if there is ever a jump in TCS_INDEX for the shortmap=-1
       case since the total number of shortmaps is calculated simply
       as the difference between the first and final TCS indices. */

    if( !nshort || (iend<istart) || (iend>=ntslice) ) {
      *status = SAI__ERROR;
      errRepf( "", FUNC_NAME ": invalid shortmap range (%zu--%zu, ntslice=%zu)"
               "encountered", status, istart, iend, ntslice );
      break;
    }

    /* Loop over subgroup index (subarray) */
    for( idx=0; (idx<res->ndat)&&(*status==SAI__OK); idx++ ) {
      int rebinflag = 0;

      /* Pointers to everything we need */
      res_data = (res->sdata[idx]->pntr)[0];
      lut_data = (lut->sdata[idx]->pntr)[0];
      qua_data = (qua->sdata[idx]->pntr)[0];

      smf_get_dims( res->sdata[idx], NULL, NULL, NULL, &ntslice,
                    &dsize, NULL, &tstride, status );

      /* Rebin the data for this range of tslices. */
      if( idx == 0 ) {
        rebinflag |= AST__REBININIT;
      }

      if( idx == (res->ndat-1) ) {
        rebinflag |= AST__REBINEND;
      }

      smf_rebinmap1( NULL, res->sdata[idx],
                     dat->noi ? dat->noi[0]->sdata[idx] : NULL,
                     lut_data, shortstart, shortend, 1, NULL, 0,
                     SMF__Q_GOOD, varmapmethod,
                     rebinflag,
                     mapdata->pntr[0],
                     shortmapweight, shortmapweightsq, shorthitsmap,
                     mapdata->pntr[1], msize, NULL, status );

      /* Write out FITS header */
      if( (*status == SAI__OK) && res->sdata[idx]->hdr &&
          res->sdata[idx]->hdr->allState ) {
        AstFitsChan *fitschan=NULL;
        JCMTState *allState = res->sdata[idx]->hdr->allState;
        size_t midpnt = (shortstart + shortend) / 2;

        fitschan = astFitsChan ( NULL, NULL, " " );

        atlPtfti( fitschan, "SEQSTART", allState[shortstart].rts_num,
                  "RTS index number of first frame", status );
        atlPtfti( fitschan, "SEQEND", allState[shortend].rts_num,
                  "RTS index number of last frame", status);
        atlPtftd( fitschan, "MJD-AVG", allState[midpnt].rts_end,
                  "Average MJD of this map", status );
        atlPtfts( fitschan, "TIMESYS", "TAI", "Time system for MJD-AVG",
                  status );
        atlPtfti( fitschan, "TCSINDST", allState[shortstart].tcs_index,
                  "TCS index of first frame", status );
        atlPtfti( fitschan, "TCSINDEN", allState[shortend].tcs_index,
                  "TCS index of last frame", status );


        kpgPtfts( mapdata->file->ndfid, fitschan, status );

        if( fitschan ) fitschan = astAnnul( fitschan );
      }
    }

    /* Update shortstart in case we are counting steps in TCS_INDEX */
    shortstart = shortend+1;

    /* Write WCS */
    smf_set_moving( (AstFrame *) outfset, NULL, status );
    ndfPtwcs( outfset, mapdata->file->ndfid, status );

    /* Clean up */
    if( mgrp ) grpDelet( &mgrp, status );
    smf_close_file( wf, &mapdata, status );

  }

  /* Free up memory */
  shortmapweight = astFree( shortmapweight );
  shortmapweightsq = astFree( shortmapweightsq );
  shorthitsmap = astFree( shorthitsmap );

}
예제 #12
0
void smf_grp_related( const Grp *igrp, const size_t grpsize,
                      const int grouping, const int checksubinst,
                      double maxlen_s, double *srate_maxlen,
                      AstKeyMap *keymap, dim_t *maxconcatlen,
                      dim_t *maxfilelen, smfGroup **group,
                      Grp **basegrp, dim_t *pad, int *status ) {

  /* Local variables */
  size_t *chunk=NULL;         /* Array of flags for continuous chunks */
  dim_t * chunklen = NULL;    /* Length of continuous chunk */
  size_t currentindex = 0;    /* Counter */
  char cwave[10];             /* String containing wavelength */
  smfData *data = NULL;       /* Current smfData */
  double downsampscale=0;     /* Angular scale downsampling size */
  double downsampfreq=0;      /* Target downsampling frequency */
  AstKeyMap * grouped = NULL; /* Primary AstKeyMap for grouping */
  size_t i;                   /* Loop counter for index into Grp */
  int isFFT=0;                /* Set if data are 4d FFT */
  size_t j;                   /* Loop counter */
  int *keepchunk=NULL;        /* Flag for chunks that will be kept */
  dim_t maxconcat=0;          /* Longest continuous chunk length */
  dim_t maxflen=0;            /* Max file length in time steps */
  dim_t maxlen=0;             /* Maximum concat length in samples */
  int maxlen_scaled=0;        /* Set once maxlen has been scaled, if needed */
  dim_t maxpad=0;             /* Maximum padding neeed for any input file */
  size_t maxrelated = 0;      /* Keep track of max number of related items */
  size_t *new_chunk=NULL;     /* keeper chunks associated with subgroups */
  dim_t *new_tlen=NULL;       /* tlens for new_subgroup */
  size_t ngroups = 0;         /* Counter for subgroups to be stored */
  size_t nkeep = 0;           /* Number of chunks to keep */
  dim_t * piecelen = NULL;    /* Length of single file */
  smf_subinst_t refsubinst;   /* Subinst of first file */
  size_t **subgroups = NULL;  /* Array containing index arrays to parent Grp */
  smf_subinst_t subinst;      /* Subinst of current file */

  if ( *status != SAI__OK ) return;

  if( maxlen_s < 0 ) {
    *status = SAI__ERROR;
    errRep( "", FUNC_NAME ": maxlen_s cannot be < 0!", status );
    return;
  }

  /* Get downsampling parameters */

  if( keymap ) {
    smf_get_cleanpar( keymap, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
                      NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
                      NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
                      NULL, NULL, NULL, NULL, &downsampscale, &downsampfreq,
                      NULL, NULL, NULL, NULL, status );

    if( downsampscale && downsampfreq ) {
      *status = SAI__ERROR;
      errRep( "", FUNC_NAME ": both downsampscale and downsampfreq are set",
              status );
      return;
    }
  }

  /* Initialize refcwave */
  refsubinst = SMF__SUBINST_NONE;

  /* Loop over files in input Grp: remember Grps are indexed from 1 */
  grouped = astKeyMap( "SortBy=KeyUp" );
  for (i=1; i<=grpsize; i++) {
    char newkey[128];
    char dateobs[81];
    char subarray[10];
    size_t nrelated = 0;
    AstKeyMap * filemap = NULL;
    AstKeyMap * indexmap = NULL;

    /* First step: open file and harvest metadata */
    smf_open_file( NULL, igrp, i, "READ", SMF__NOCREATE_DATA, &data, status );
    if (*status != SAI__OK) break;

    if( i==1 ) {
      isFFT = smf_isfft( data, NULL, NULL, NULL, NULL, NULL, status );
    } else if( smf_isfft(data, NULL, NULL, NULL, NULL, NULL, status) != isFFT ){
      *status = SAI__ERROR;
      errRep( "", FUNC_NAME
              ": mixture of time-series and FFT data encountered!",
              status );
      break;
    }

    /* If maxlen has not been set, do it here */
    if( !maxlen && maxlen_s && data->hdr->steptime) {
      maxlen = (dim_t) (maxlen_s / data->hdr->steptime );
    }

    /* Return srate_maxlen if requested: may want to know this number
       even if maxlen_s is not set. Only calculate once, although it
       gets overwritten once later if down-sampling. */

    if( (i==1) && srate_maxlen && data->hdr->steptime ) {
      *srate_maxlen = 1. / (double) data->hdr->steptime;
    }


    /* If requested check to see if we are mixing wavelengths */
    if( checksubinst ) {
      if( refsubinst == SMF__SUBINST_NONE ) {
        refsubinst = smf_calc_subinst( data->hdr, status );
      }

      subinst = smf_calc_subinst( data->hdr, status );

      if( subinst != refsubinst ) {
        const char *refsubstr = smf_subinst_str( refsubinst, status );
        const char *substr = smf_subinst_str( subinst, status );

        *status = SAI__ERROR;
        smf_smfFile_msg( data->file, "FILE", 1, "<unknown>" );
        msgSetc( "REFSUB", refsubstr );
        msgSetc( "SUB", substr );
        errRep( "", FUNC_NAME
                ": ^FILE uses sub-instrument ^SUB which doesn't match "
                "reference ^REFSUB", status );
      }
    }

    /* Want to form a key that will be unique for a particular subscan
       We know that DATE-OBS will be set for SCUBA-2 files and be the same
       for a single set. Prefix by wavelength if we are grouping by wavelength.
     */
    newkey[0] = '\0';

    smf_find_subarray( data->hdr, subarray, sizeof(subarray), NULL, status );

    if( grouping == 1 ) {
      /* Group different wavelengths separately */
      smf_fits_getS( data->hdr, "WAVELEN", cwave, sizeof(cwave), status);
      one_strlcat( newkey, cwave, sizeof(newkey), status );
      one_strlcat( newkey, "_", sizeof(newkey), status );
    }

    if( grouping == 2 ) {
      /* Group different subarrays separately */
      one_strlcat( newkey, subarray, sizeof(newkey), status );
    }

    smf_fits_getS( data->hdr, "DATE-OBS", dateobs, sizeof(dateobs), status );
    one_strlcat( newkey, dateobs, sizeof(newkey), status );

    /* Include the dimentionality of the time series in the primary key
       so that we do not end up doing something confusing like relating
       a truncated file with a full length file */
    if (*status == SAI__OK) {
      dim_t dims[3];
      char formatted[32];
      smf_get_dims( data, &dims[0], &dims[1], NULL, &dims[2], NULL, NULL, NULL,
                    status );
      sprintf(formatted, "_%" DIM_T_FMT "_%" DIM_T_FMT "_%" DIM_T_FMT, dims[0], dims[1], dims[2]);
      one_strlcat( newkey, formatted, sizeof(newkey), status );
    }

    /* May want to read the dimensionality of the file outside of loop
       so that we can compare values when storing in the keymap */

    /* Now we want to create a keymap based on this key */
    if (!astMapGet0A( grouped, newkey, &filemap ) ) {
      int itemp = 0;
      double steptime = data->hdr->steptime;
      dim_t ntslice = 0;
      dim_t thispad;              /* Padding neeed for current input file */

      filemap = astKeyMap( " " );
      astMapPut0A( grouped, newkey, filemap, NULL );

      /* Fill up filemap with general information on this file */
      smf_find_seqcount( data->hdr, &itemp, status );
      astMapPut0I( filemap, "SEQCOUNT", itemp, NULL );

      smf_fits_getI( data->hdr, "NSUBSCAN", &itemp, status );
      astMapPut0I( filemap, "NSUBSCAN", itemp, NULL );

      /* Number of time slices */
      smf_get_dims( data, NULL, NULL, NULL, &ntslice, NULL, NULL, NULL,
                    status );

      /* Find length of down-sampled data, new steptime and maxlen */
      if( (downsampscale || downsampfreq) && data->hdr && (*status==SAI__OK) ) {
        double scalelen;

        if( downsampscale ) {
          if( data->hdr->scanvel != VAL__BADD ) {
             double oldscale = steptime * data->hdr->scanvel;
             scalelen = oldscale / downsampscale;
          } else if( *status == SAI__OK ) {
             *status = SAI__ERROR;
            scalelen = VAL__BADD;
            smf_smfFile_msg( data->file, "FILE", 1, "" );
            errRep( "", FUNC_NAME ": can't resample ^FILE because it has "
                    "unknown scan velocity", status );
          }
        } else {
          if( steptime ) {
            double oldsampfreq = 1./steptime;
            scalelen = downsampfreq / oldsampfreq;
          } else {
            *status = SAI__ERROR;
            scalelen = VAL__BADD;
            smf_smfFile_msg( data->file, "FILE", 1, "" );
            errRep( "", FUNC_NAME ": can't resample ^FILE because it has "
                    "unknown sample rate", status );
          }
        }

        /* only down-sample if it will be a reasonable factor */
        if( (*status==SAI__OK) && (scalelen <= SMF__DOWNSAMPLIMIT) ) {
          smf_smfFile_msg(data->file, "FILE", 1, "" );
          msgOutiff( MSG__VERB, "", FUNC_NAME
                     ": will down-sample file ^FILE from %5.1lf Hz to "
                     "%5.1lf Hz", status, (1./steptime), (scalelen/steptime) );

          ntslice = round(ntslice * scalelen);

          /* If maxlen has been requested, and we have not already worked
             out a scaled version (just uses the sample rates for the first
             file... should be close enough -- the alternative is a 2-pass
             system). */

          if( !maxlen_scaled ) {
            maxlen = round(maxlen*scalelen);
            maxlen_scaled = 1;
            msgOutiff( MSG__VERB, "", FUNC_NAME
                       ": requested maxlen %g seconds = %" DIM_T_FMT " down-sampled "
                       "time-slices", status, maxlen_s, maxlen );

            /* Return updated srate_maxlen for down-sampling if requested */
            if( srate_maxlen ) {
              *srate_maxlen = scalelen/steptime;
            }
          }
        }
      }

      /* Check that an individual file is too long (we assume related
         files are all the same) */
      if( maxlen && (ntslice > maxlen) && *status == SAI__OK) {
        *status = SAI__ERROR;
        msgSeti("NTSLICE",ntslice);
        msgSeti("MAXLEN",maxlen);
        smf_smfFile_msg( data->file, "FILE", 1, "" );
        errRep(FUNC_NAME,
               "Number of time steps in file ^FILE time exceeds maximum "
               "(^NTSLICE>^MAXLEN)", status);
      }

      /* Scaled values of ntslice and maximum length */
      astMapPut0I( filemap, "NTSLICE", ntslice, NULL );

      /* Work out the padding needed for this file including downsampling. */
      if( keymap ) {
        thispad = smf_get_padding( keymap, 0, data->hdr, VAL__BADD, status );
        if( thispad > maxpad ) maxpad = thispad;
      } else {
        thispad = 0;
      }
      astMapPut0I( filemap, "PADDING", thispad, NULL );

      /* Update maxflen */
      if( ntslice > maxflen ) {
        maxflen = ntslice;
      }

      /* Store OBSID or OBSIDSS depending on whether we are grouping by wavelength */
      if (grouping) {
        astMapPut0C( filemap, "OBSID", data->hdr->obsidss, NULL );
      } else {
        char obsid[81];
        smf_getobsidss( data->hdr->fitshdr, obsid, sizeof(obsid), NULL, 0, status );
        astMapPut0C( filemap, "OBSID", obsid, NULL );
      }
    }

    /* Store the file index in another keymap indexed by subarray */
    if ( !astMapGet0A( filemap, "GRPINDICES", &indexmap ) ) {
      indexmap = astKeyMap( "SortBy=KeyUp" );
      astMapPut0A( filemap, "GRPINDICES", indexmap, NULL );
    }

    astMapPut0I( indexmap, subarray, i, NULL );

    /* Need to track the largest number of related subarrays in a single slot */
    nrelated = astMapSize( indexmap );
    if (nrelated > maxrelated) maxrelated = nrelated;

    /* Free resources */
    filemap = astAnnul( filemap );
    indexmap = astAnnul( indexmap );
    smf_close_file( NULL, &data, status );
  }

  /* We now know how many groups there are */
  ngroups = astMapSize( grouped );

  /* Sort out chunking. The items are sorted by date and then by wavelength.
     We define a continuous chunk if it has the same OBSID, the same SEQCOUNT
     and NSUBSCAN increments by one from the previous entry.

     Also count number of related items in each slot.
   */
  if (*status == SAI__OK) {
    typedef struct { /* somewhere to store the values easily */
      char obsid[81];
      char related[81];  /* for concatenated subarrays */
      int nsubscan;
      int seqcount;
    } smfCompareSeq;
    smfCompareSeq current;
    smfCompareSeq previous;
    dim_t totlen = 0;
    size_t thischunk;

    /* Get the chunk flags and also store the size of the chunk */
    chunk = astCalloc( ngroups, sizeof(*chunk) );
    chunklen = astCalloc( ngroups, sizeof(*chunklen) );
    piecelen = astCalloc( ngroups, sizeof(*piecelen) );

    thischunk = 0;  /* The current chunk */
    for (i=0; i<ngroups; i++) {
      AstKeyMap * thismap = NULL;
      AstKeyMap * grpindices = NULL;
      const char * tempstr = NULL;
      int thistlen = 0;
      size_t nsubarrays = 0;

      /* Get the keymap entry for this slot */
      astMapGet0A( grouped, astMapKey(grouped, i), &thismap );

      /* Get info for length limits */
      astMapGet0I( thismap, "NTSLICE", &thistlen );
      piecelen[i] = thistlen;

      if (isFFT) {
        /* Never concatenate FFT data */
        thismap = astAnnul(thismap);
        chunk[i] = i;
        chunklen[i] = thistlen;
        continue;
      }

      /* Get indices information and retrieve the sub-instrument names
         in sort order to concatenate for comparison. We only store in
         a continuous chunk if we have the same subarrays for the whole
         chunk. */
      astMapGet0A( thismap, "GRPINDICES", &grpindices );
      nsubarrays = astMapSize( grpindices );
      (current.related)[0] = '\0';
      for (j = 0; j < nsubarrays; j++ ) {
        one_strlcat( current.related, astMapKey(grpindices, j), sizeof(current.related), status );
      }
      grpindices = astAnnul( grpindices );

      /* Fill in the current struct */
      astMapGet0I( thismap, "SEQCOUNT", &(current.seqcount) );
      astMapGet0I( thismap, "NSUBSCAN", &(current.nsubscan) );
      astMapGet0C( thismap, "OBSID", &tempstr );
      one_strlcpy( current.obsid, tempstr, sizeof(current.obsid), status );

      /* First chunk is special, else compare */
      if (i == 0) {
        totlen = thistlen;
      } else {
        if (  ( current.seqcount == previous.seqcount  ) &&
              ( current.nsubscan - previous.nsubscan == 1 ) &&
              ( strcmp( current.obsid, previous.obsid ) == 0 ) &&
              ( strcmp( current.related, previous.related ) == 0 ) ) {
          /* continuous - check length */
          totlen += thistlen;
          if ( maxlen && totlen > maxlen ) {
            thischunk++;
            totlen = thistlen; /* reset length */
          } else {
            /* Continuous */
          }
        } else {
          /* discontinuity */
          thischunk++;
          totlen = thistlen;  /* Update length of current chunk */
        }
      }

      chunklen[thischunk] = totlen;
      chunk[i] = thischunk;
      memcpy( &previous, &current, sizeof(current) );

      thismap = astAnnul( thismap );
    }
  }

  /* Decide if we are keeping a chunk by looking at the length. */
  maxconcat = 0;
  nkeep = 0;
  keepchunk = astMalloc( ngroups*sizeof(*keepchunk) );
  for (i=0; i<ngroups; i++) {
    size_t thischunk;

    thischunk = chunk[i];
    if ( chunklen[thischunk] < SMF__MINCHUNKSAMP ) {
      /* Warning message */
      msgSeti("LEN",chunklen[thischunk]);
      msgSeti("MIN",SMF__MINCHUNKSAMP);
      msgOut( " ", "SMF_GRP_RELATED: ignoring short chunk (^LEN<^MIN)",
              status);
      keepchunk[i] = 0;
    } else {
      keepchunk[i] = 1;
      if (maxconcat < chunklen[thischunk]) maxconcat = chunklen[thischunk];
      nkeep++;
    }

  }

  /* If no useful chunks generate an error */
  if( (*status==SAI__OK) && (!nkeep) ) {
    *status = SAI__ERROR;
    errRep( "", FUNC_NAME ": No useful chunks.", status );
    goto CLEANUP;
  }

  /* Allocate a subgroup array of the right size and fill it. They keymap
     is sorted by date (and wavelength) so we can always index into it by using
     indices from the subgroup. */
  subgroups = astCalloc( nkeep, sizeof(*subgroups) );
  new_chunk = astCalloc( nkeep, sizeof(*new_chunk) );
  new_tlen  = astCalloc( nkeep, sizeof(*new_tlen) );

  currentindex = 0;
  for (i=0;i<ngroups;i++) {
    AstKeyMap * thismap = NULL;
    AstKeyMap * grpindices = NULL;
    size_t nsubarrays = 0;
    size_t *indices = astCalloc( maxrelated, sizeof(*indices) );

    /* skip if we are dropping this chunk */
    if (!keepchunk[i]) continue;

    /* Get the keymap entry for this slot */
    astMapGet0A( grouped, astMapKey(grouped, i), &thismap );

    /* Get the indices keymap */
    astMapGet0A( thismap, "GRPINDICES", &grpindices );
    nsubarrays = astMapSize( grpindices );
    for (j=0; j<nsubarrays; j++) {
      int myindex;
      astMapGet0I( grpindices, astMapKey(grpindices, j), &myindex );
      indices[j] = myindex;
    }
    grpindices = astAnnul( grpindices );
    thismap = astAnnul( thismap );

    subgroups[currentindex] = indices;
    new_chunk[currentindex] = chunk[i];
    new_tlen[currentindex]  = piecelen[i];
    currentindex++;

  }

  /* Create the smfGroup */
  *group = smf_construct_smfGroup( igrp, subgroups, new_chunk, new_tlen,
                                   nkeep, maxrelated, 0, status );

  /* Return maxfilelen if requested */
  if( maxfilelen ) {
    *maxfilelen = maxflen;
  }

  /* Return maxconcatlen if requested */
  if( maxconcatlen ) {
    *maxconcatlen = maxconcat;
  }

  /* Create a base group for output files if required */
  /* Create a base group of filenames */
  if (*status == SAI__OK && basegrp ) {
    *basegrp = smf_grp_new( (*group)->grp, "Base Group", status );

    /* Loop over time chunks */
    for( i=0; (*status==SAI__OK)&&(i<(*group)->ngroups); i++ ) {
      size_t idx;
      /* Check for new continuous chunk */
      if( i==0 || ( (*group)->chunk[i] != (*group)->chunk[i-1]) ) {
        /* Loop over subarray */
        for( idx=0; idx<(*group)->nrelated; idx++ ) {
          size_t grpindex = (*group)->subgroups[i][idx];
          if ( grpindex > 0 ) {
            ndgCpsup( (*group)->grp, grpindex, *basegrp, status );
          }
        }
      }
    }
  }

 CLEANUP:
  keepchunk = astFree( keepchunk );
  chunk = astFree( chunk );
  chunklen = astFree( chunklen );
  piecelen = astFree( piecelen );
  grouped = astAnnul( grouped );

  if( *status != SAI__OK ) {
    /* free the group */
    if (basegrp && *basegrp) grpDelet( basegrp, status );
    if (group && *group) {
      smf_close_smfGroup( group, status );
    } else {
      /* have to clean up manually */
      new_chunk = astFree( new_chunk );
      new_tlen = astFree( new_tlen );
      if( subgroups ) {
        size_t isub;
        for( isub=0; isub<nkeep; isub++ ) {
          subgroups[isub] = astFree( subgroups[isub] );
        }
        subgroups = astFree( subgroups );
      }
    }
  }

  /* Return the maximum padding if required. */
  if( pad ) *pad = maxpad;
}