예제 #1
0
void
split_quadword_operands (rtx * operands, rtx * low, int n ATTRIBUTE_UNUSED)
{
  int i;
  /* Split operands.  */

  low[0] = low[1] = low[2] = 0;
  for (i = 0; i < 3; i++)
    {
      if (low[i])
	/* it's already been figured out */;
      else if (GET_CODE (operands[i]) == MEM
	       && (GET_CODE (XEXP (operands[i], 0)) == POST_INC))
	{
	  rtx addr = XEXP (operands[i], 0);
	  operands[i] = low[i] = gen_rtx_MEM (SImode, addr);
	  if (which_alternative == 0 && i == 0)
	    {
	      addr = XEXP (operands[i], 0);
	      operands[i+1] = low[i+1] = gen_rtx_MEM (SImode, addr);
	    }
	}
      else
	{
	  low[i] = operand_subword (operands[i], 0, 0, DImode);
	  operands[i] = operand_subword (operands[i], 1, 0, DImode);
	}
    }
}
예제 #2
0
파일: fr30.c 프로젝트: 5432935/crossbridge
rtx
fr30_move_double (rtx * operands)
{
  rtx src  = operands[1];
  rtx dest = operands[0];
  enum rtx_code src_code = GET_CODE (src);
  enum rtx_code dest_code = GET_CODE (dest);
  enum machine_mode mode = GET_MODE (dest);
  rtx val;

  start_sequence ();

  if (dest_code == REG)
    {
      if (src_code == REG)
	{
	  int reverse = (REGNO (dest) == REGNO (src) + 1);
	  
	  /* We normally copy the low-numbered register first.  However, if
	     the first register of operand 0 is the same as the second register
	     of operand 1, we must copy in the opposite order.  */
	  emit_insn (gen_rtx_SET (VOIDmode,
				  operand_subword (dest, reverse, TRUE, mode),
				  operand_subword (src,  reverse, TRUE, mode)));
	  
	  emit_insn (gen_rtx_SET (VOIDmode,
			      operand_subword (dest, !reverse, TRUE, mode),
			      operand_subword (src,  !reverse, TRUE, mode)));
	}
      else if (src_code == MEM)
	{
	  rtx addr = XEXP (src, 0);
	  int dregno = REGNO (dest);
	  rtx dest0;
	  rtx dest1;
	  rtx new_mem;
	  
	  /* If the high-address word is used in the address, we
	     must load it last.  Otherwise, load it first.  */
	  int reverse = (refers_to_regno_p (dregno, dregno + 1, addr, 0) != 0);

	  gcc_assert (GET_CODE (addr) == REG);
	  
	  dest0 = operand_subword (dest, reverse, TRUE, mode);
	  dest1 = operand_subword (dest, !reverse, TRUE, mode);

	  if (reverse)
	    {
	      emit_insn (gen_rtx_SET (VOIDmode, dest1,
				      adjust_address (src, SImode, 0)));
	      emit_insn (gen_rtx_SET (SImode, dest0,
				      gen_rtx_REG (SImode, REGNO (addr))));
	      emit_insn (gen_rtx_SET (SImode, dest0,
				      plus_constant (dest0, UNITS_PER_WORD)));

	      new_mem = gen_rtx_MEM (SImode, dest0);
	      MEM_COPY_ATTRIBUTES (new_mem, src);
	      
	      emit_insn (gen_rtx_SET (VOIDmode, dest0, new_mem));
	    }
	  else
	    {
	      emit_insn (gen_rtx_SET (VOIDmode, dest0,
				      adjust_address (src, SImode, 0)));
	      emit_insn (gen_rtx_SET (SImode, dest1,
				      gen_rtx_REG (SImode, REGNO (addr))));
	      emit_insn (gen_rtx_SET (SImode, dest1,
				      plus_constant (dest1, UNITS_PER_WORD)));

	      new_mem = gen_rtx_MEM (SImode, dest1);
	      MEM_COPY_ATTRIBUTES (new_mem, src);
	      
	      emit_insn (gen_rtx_SET (VOIDmode, dest1, new_mem));
	    }
	}
      else if (src_code == CONST_INT || src_code == CONST_DOUBLE)
	{
	  rtx words[2];
	  split_double (src, &words[0], &words[1]);
	  emit_insn (gen_rtx_SET (VOIDmode,
				  operand_subword (dest, 0, TRUE, mode),
				  words[0]));
      
	  emit_insn (gen_rtx_SET (VOIDmode,
				  operand_subword (dest, 1, TRUE, mode),
				  words[1]));
	}
    }
  else if (src_code == REG && dest_code == MEM)
    {
      rtx addr = XEXP (dest, 0);
      rtx src0;
      rtx src1;

      gcc_assert (GET_CODE (addr) == REG);
      
      src0 = operand_subword (src, 0, TRUE, mode);
      src1 = operand_subword (src, 1, TRUE, mode);
      
      emit_insn (gen_rtx_SET (VOIDmode, adjust_address (dest, SImode, 0),
			      src0));

      if (REGNO (addr) == STACK_POINTER_REGNUM
	  || REGNO (addr) == FRAME_POINTER_REGNUM)
	emit_insn (gen_rtx_SET (VOIDmode,
				adjust_address (dest, SImode, UNITS_PER_WORD),
				src1));
      else
	{
	  rtx new_mem;
	  
	  /* We need a scratch register to hold the value of 'address + 4'.
	     We ought to allow gcc to find one for us, but for now, just
	     push one of the source registers.  */
	  emit_insn (gen_movsi_push (src0));
	  emit_insn (gen_movsi_internal (src0, addr));
	  emit_insn (gen_addsi_small_int (src0, src0, GEN_INT (UNITS_PER_WORD)));
	  
	  new_mem = gen_rtx_MEM (SImode, src0);
	  MEM_COPY_ATTRIBUTES (new_mem, dest);
	  
	  emit_insn (gen_rtx_SET (VOIDmode, new_mem, src1));
	  emit_insn (gen_movsi_pop (src0));
	}
    }
  else
    /* This should have been prevented by the constraints on movdi_insn.  */
    gcc_unreachable ();
  
  val = get_insns ();
  end_sequence ();

  return val;
}
예제 #3
0
파일: fr30.c 프로젝트: sequoiar/moxiedev
rtx
fr30_move_double (rtx * operands)
{
  rtx src  = operands[1];
  rtx dest = operands[0];
  enum rtx_code src_code = GET_CODE (src);
  enum rtx_code dest_code = GET_CODE (dest);
  enum machine_mode mode = GET_MODE (dest);
  rtx val;

  start_sequence ();

  if (dest_code == REG)
    {
      if (src_code == REG)
	{
	  int reverse = (REGNO (dest) == REGNO (src) + 1);
	  
	  /* We normally copy the low-numbered register first.  However, if
	     the first register of operand 0 is the same as the second register
	     of operand 1, we must copy in the opposite order.  */
	  emit_insn (gen_rtx_SET (VOIDmode,
				  operand_subword (dest, reverse, TRUE, mode),
				  operand_subword (src,  reverse, TRUE, mode)));
	  
	  emit_insn (gen_rtx_SET (VOIDmode,
			      operand_subword (dest, !reverse, TRUE, mode),
			      operand_subword (src,  !reverse, TRUE, mode)));
	}
      else if (src_code == MEM)
	{
	  rtx addr = XEXP (src, 0);
	  int dregno = REGNO (dest);
	  rtx dest0 = operand_subword (dest, 0, TRUE, mode);;
	  rtx dest1 = operand_subword (dest, 1, TRUE, mode);;
	  rtx new_mem;
	  
	  gcc_assert (GET_CODE (addr) == REG);
	  
	  /* Copy the address before clobbering it.  See PR 34174.  */
	  emit_insn (gen_rtx_SET (SImode, dest1, addr));
	  emit_insn (gen_rtx_SET (VOIDmode, dest0,
				  adjust_address (src, SImode, 0)));
	  emit_insn (gen_rtx_SET (SImode, dest1,
				  plus_constant (dest1, UNITS_PER_WORD)));

	  new_mem = gen_rtx_MEM (SImode, dest1);
	  MEM_COPY_ATTRIBUTES (new_mem, src);
	      
	  emit_insn (gen_rtx_SET (VOIDmode, dest1, new_mem));
	}
      else if (src_code == CONST_INT || src_code == CONST_DOUBLE)
	{
	  rtx words[2];
	  split_double (src, &words[0], &words[1]);
	  emit_insn (gen_rtx_SET (VOIDmode,
				  operand_subword (dest, 0, TRUE, mode),
				  words[0]));
      
	  emit_insn (gen_rtx_SET (VOIDmode,
				  operand_subword (dest, 1, TRUE, mode),
				  words[1]));
	}
    }
  else if (src_code == REG && dest_code == MEM)
    {
      rtx addr = XEXP (dest, 0);
      rtx src0;
      rtx src1;

      gcc_assert (GET_CODE (addr) == REG);

      src0 = operand_subword (src, 0, TRUE, mode);
      src1 = operand_subword (src, 1, TRUE, mode);

      emit_move_insn (adjust_address (dest, SImode, 0), src0);

      if (REGNO (addr) == STACK_POINTER_REGNUM
	  || REGNO (addr) == FRAME_POINTER_REGNUM)
	emit_insn (gen_rtx_SET (VOIDmode,
				adjust_address (dest, SImode, UNITS_PER_WORD),
				src1));
      else
	{
	  rtx new_mem;
	  rtx scratch_reg_r0 = gen_rtx_REG (SImode, 0);

	  /* We need a scratch register to hold the value of 'address + 4'.
	     We use r0 for this purpose. It is used for example for long
	     jumps and is already marked to not be used by normal register
	     allocation.  */
	  emit_insn (gen_movsi_internal (scratch_reg_r0, addr));
	  emit_insn (gen_addsi_small_int (scratch_reg_r0, scratch_reg_r0,
					  GEN_INT (UNITS_PER_WORD)));
	  new_mem = gen_rtx_MEM (SImode, scratch_reg_r0);
	  MEM_COPY_ATTRIBUTES (new_mem, dest);
	  emit_move_insn (new_mem, src1);
	  emit_insn (gen_blockage ());
	}
    }
  else
    /* This should have been prevented by the constraints on movdi_insn.  */
    gcc_unreachable ();

  val = get_insns ();
  end_sequence ();

  return val;
}