s32 bsp_close(u32 fd)
{
s32 ret;
struct bsp_rfile_close_req stReq;
osSemaphoreWait(g_stRfileMain.semAll, osWaitForever);
stReq.opType = EN_RFILE_OP_CLOSE;
stReq.pstlist = NULL;
stReq.fd = fd;
ret = bsp_icc_send(ICC_CPU_APP, RFILE_MCORE_ICC_WR_CHAN, &stReq, sizeof(struct bsp_rfile_close_req));
if (sizeof(struct bsp_rfile_close_req) != ret)
{
bsp_trace(BSP_LOG_LEVEL_DEBUG, BSP_MODU_RFILE, "%d.\n", __LINE__);
g_stRfileMain.ret = -1;
}
else
{
osSemaphoreWait(g_stRfileMain.semReq, osWaitForever);
}
osSemaphoreRelease(g_stRfileMain.semAll);
return g_stRfileMain.ret;
}
bool_t osWaitForEvent(OsEvent *event, systime_t timeout)
{
int32_t ret;
//Wait until the specified event is in the signaled
//state or the timeout interval elapses
if(timeout == INFINITE_DELAY)
{
//Infinite timeout period
ret = osSemaphoreWait(event->id, osWaitForever);
}
else
{
#if defined(osCMSIS_RTX)
systime_t n;
//Loop until the assigned time period has elapsed
do
{
//Limit the timeout value
n = MIN(timeout, 10000);
//Wait for the specified time interval
ret = osSemaphoreWait(event->id, n);
//Decrement timeout value
timeout -= n;
//Check timeout value
} while(ret == 0 && timeout > 0);
#else
//Wait for the specified time interval
ret = osSemaphoreWait(event->id, timeout);
#endif
}
#if defined(osCMSIS_RTX)
//Check return value
if(ret > 0)
{
//Force the event back to the nonsignaled state
while(osSemaphoreWait(event->id, 0) > 0);
//The specified event is in the signaled state
return TRUE;
}
else
{
//The timeout interval elapsed
return FALSE;
}
#else
//Check return value
if(ret == osOK)
return TRUE;
else
return FALSE;
#endif
}
void Start_input_buttonTask(void const * argument)
{
GPIO_InitTypeDef GPIO_InitStruct;
fsm_event_f button_fsm_event;
/* Take both semaphores for the first time */
osSemaphoreWait(sem_input_button_short_pressHandle, osWaitForever);
osSemaphoreWait(sem_input_button_long_pressHandle, osWaitForever);
/* Infinite loop */
for(;;)
{
/* If I/O button is pressed */
if (osSemaphoreWait(sem_input_button_short_pressHandle, osWaitForever) == osOK)
{
/* Make falling edge sensitive */
GPIO_InitStruct.Pin = WAKEUP_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(WAKEUP_GPIO_Port, &GPIO_InitStruct);
// TEST
osSemaphoreRelease(sem_ecg_keygenHandle);
/* Wait for falling edge */
if (osSemaphoreWait(sem_input_button_long_pressHandle, 2000) == osErrorOS)
{
/* If falling edge is NOT detected before timeout
* we have a long press
*/
button_fsm_event = fsm_button_long;
while(osMailPut(queue_fsm_eventsHandle, (void *) &button_fsm_event) != osOK)
{
osDelay(1);
}
}
else
{
/* Make rising edge sensitive again */
GPIO_InitStruct.Pin = WAKEUP_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(WAKEUP_GPIO_Port, &GPIO_InitStruct);
/* If falling edge is detected before timeout
* we have a short press
*/
button_fsm_event = fsm_button_short;
while(osMailPut(queue_fsm_eventsHandle, (void *) &button_fsm_event) != osOK)
{
osDelay(1);
}
}
}
}
}
void osResetEvent(OsEvent *event)
{
#if defined(osCMSIS_RTX)
//Force the specified event to the nonsignaled state
while(osSemaphoreWait(event->id, 0) > 0);
#else
//Force the specified event to the nonsignaled state
osSemaphoreWait(event->id, 0);
#endif
}
s32 bsp_open(const s8 *path, s32 flags, s32 mode)
{
s32 ret;
u32 ulNameLen, ulSize;
struct bsp_rfile_open_req *pstReq;
osSemaphoreWait(g_stRfileMain.semAll, osWaitForever);
if(!path)
{
return BSP_ERROR;
}
ulNameLen = strlen(path) + 1;
ulSize = sizeof(struct bsp_rfile_open_req) + ulNameLen;
if(ulSize > RFILE_LEN_MAX)
{
return BSP_ERROR;
}
pstReq = Rfile_Malloc(ulSize);
if(!pstReq)
{
return BSP_ERROR;
}
pstReq->opType = EN_RFILE_OP_OPEN;
pstReq->pstlist = NULL;
pstReq->nameLen = ulNameLen;
pstReq->mode = mode;
pstReq->flags = flags;
memcpy(pstReq->aucData, path, ulNameLen);
ret = bsp_icc_send(ICC_CPU_APP, RFILE_MCORE_ICC_WR_CHAN, pstReq, ulSize);
if (ulSize != ret)
{
bsp_trace(BSP_LOG_LEVEL_DEBUG, BSP_MODU_RFILE, "%d.\n", __LINE__);
g_stRfileMain.ret = -1;
}
else
{
osSemaphoreWait(g_stRfileMain.semReq, osWaitForever);
}
Rfile_Free(pstReq);
osSemaphoreRelease(g_stRfileMain.semAll);
return g_stRfileMain.ret;
}
/*!
@brief Program entry point
*/
int main (void) {
Mode currentMode;
mainThread_ID = osThreadGetId();
// start threads. Low priority ensures main will finish
osThreadDef (tM_run, osPriorityBelowNormal, 1, 0);
tempThread_ID = osThreadCreate( osThread (tM_run), NULL);
osThreadDef (aM_run, osPriorityBelowNormal, 1, 0);
accThread_ID = osThreadCreate( osThread (aM_run), NULL);
LED_init();
buttonInit();
tM_init();
aM_init();
// lock both mode semaphores, they are both in "used" mode
osSemaphoreWait( tempSema, osWaitForever);
osSemaphoreWait( accSema, osWaitForever);
// start in TEMP_MODE
currentMode = TEMP_MODE;
osSemaphoreRelease( tempSema);
TIM3_Init(ACC_FREQ);
while(1) {
//will start and wait for a tap before anything happends
//it will run the threads though
osSignalWait(0x1, osWaitForever);
// once we're past here, it means a tap has been detected!
switch( currentMode) {
case TEMP_MODE:
// we wait until the semaphore becomes available
osSemaphoreWait( tempSema, osWaitForever);
osDelay (500);
acc_clearLatch();
osSemaphoreRelease(accSema);
currentMode = ACC_MODE;
break;
case ACC_MODE:
osSemaphoreWait( accSema, osWaitForever);
osDelay (500);
acc_clearLatch();
osSemaphoreRelease(tempSema);
currentMode = TEMP_MODE;
break;
}
}
}
s32 bsp_write(u32 fd, const s8 *ptr, u32 size)
{
s32 ret = -1;
u32 ulCur, ulLen;
osSemaphoreWait(g_stRfileMain.semAll, osWaitForever);
if(!ptr)
{
return BSP_ERROR;
}
/* 如果长度超过ICC最大长度限制，需要拆分传送 */
ulCur = 0;
while(ulCur < size)
{
ulLen = ((size - ulCur) > RFILE_WR_LEN_MAX) ? RFILE_WR_LEN_MAX : (size - ulCur);
ret = rfile_write(fd, ((u8*)ptr+ulCur), ulLen);
ulCur += ret;
if(ret != ulLen)
{
break;
}
}
osSemaphoreRelease(g_stRfileMain.semAll);
return ulCur;
}
/**
* @brief Semaphore Thread 2 function
* @param argument: shared semaphore
* @retval None
*/
static void SemaphoreThread2 (void const *argument)
{
uint32_t count = 0;
osSemaphoreId semaphore = (osSemaphoreId) argument;
for(;;)
{
if (semaphore != NULL)
{
/* Try to obtain the semaphore. */
if(osSemaphoreWait(semaphore , 0) == osOK)
{
/* Resume Thread 1 (higher priority)*/
osThreadResume(SemThread1Handle);
count = osKernelSysTick() + 5000;
/* Toggle LED3 every 200 ms for 5 seconds*/
while (count >= osKernelSysTick())
{
BSP_LED_Toggle(LED3);
osDelay(200);
}
/* Turn off LED3 */
BSP_LED_Off(LED3);
/* Release the semaphore to unblock Thread 1 (higher priority) */
osSemaphoreRelease(semaphore);
}
}
}
}
bool_t osCreateEvent(OsEvent *event)
{
osSemaphoreDef_t semaphoreDef;
#if defined(osCMSIS_RTX)
semaphoreDef.semaphore = event->cb;
#else
semaphoreDef.dummy = 0;
#endif
//Create a binary semaphore object
event->id = osSemaphoreCreate(&semaphoreDef, 1);
//Check whether the returned semaphore ID is valid
if(event->id != NULL)
{
//Force the specified event to the nonsignaled state
osSemaphoreWait(event->id, 0);
//Event successfully created
return TRUE;
}
else
{
//Failed to create event object
return FALSE;
}
}
/**
* @brief Semaphore Thread 1 function
* @param argument: shared semaphore
* @retval None
*/
static void SemaphoreThread1 (void const *argument)
{
uint32_t count = 0;
osSemaphoreId semaphore = (osSemaphoreId) argument;
for(;;)
{
if (semaphore != NULL)
{
/* Try to obtain the semaphore. */
if(osSemaphoreWait(semaphore , 100) == osOK)
{
count = osKernelSysTick() + 5000;
while (count >= osKernelSysTick())
{
/* Toggle LED1 */
BSP_LED_Toggle(LED1);
/* Delay 200 ms */
osDelay(200);
}
/* Turn off LED1 */
BSP_LED_Off(LED1);
/* Release the semaphore */
osSemaphoreRelease(semaphore);
/* Suspend ourseleves to execute thread 2 (lower priority) */
osThreadSuspend(NULL);
}
}
}
}
int main(void)
{
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Initialize all configured peripherals */
MX_GPIO_Init();
/* Create the threads and semaphore */
osThreadDef(defaultTask, StartDefaultTask, osPriorityNormal, 0, 128);
defaultTaskHandle = osThreadCreate(osThread(defaultTask), NULL);
osThreadDef(blinkTask, BlinkTask, osPriorityNormal, 0, 128);
blinkTaskHandle = osThreadCreate(osThread(blinkTask), NULL);
osSemaphoreDef(sem);
semHandle = osSemaphoreCreate(osSemaphore(sem), 1);
osSemaphoreWait(semHandle, osWaitForever);
/* Start scheduler */
osKernelStart();
/* We should never get here as control is now taken by the scheduler */
/* Infinite loop */
while (1);
}
void getWirelessAngles(int8_t* angles)
{
osSemaphoreWait(wirelessAccId, osWaitForever);
angles[0] = wirelessAngles[0];
angles[1] = wirelessAngles[1];
osSemaphoreRelease(wirelessAccId);
}
CAN_ERROR CAN_hw_tx_empty (U32 ctrl)
{
HAL_CAN_StateTypeDef state;
CAN_HandleTypeDef *hCAN;
int av = osSemaphoreWait(wr_sem[ctrl-1], 0);
if (av >0)
{
switch (ctrl)
{
#if RTE_CAN1 == 1
case __CTRL1:
hCAN = &hCAN1;
break;
#endif
#if RTE_CAN2 == 1
case __CTRL2:
hCAN= &hCan2;
break;
#endif
default:
return CAN_UNEXIST_CTRL_ERROR;
}
state = HAL_CAN_GetState(hCAN);
if((state == HAL_CAN_STATE_READY) || (state == HAL_CAN_STATE_BUSY_RX))
return CAN_OK;
else
osSemaphoreRelease(wr_sem[ctrl-1]); /* Return a token back to semaphore */
}
return CAN_TX_BUSY_ERROR;
}
bool_t osWaitForSemaphore(OsSemaphore *semaphore, systime_t timeout)
{
int32_t ret;
//Wait until the semaphore is available or the timeout interval elapses
if(timeout == INFINITE_DELAY)
{
//Infinite timeout period
ret = osSemaphoreWait(semaphore->id, osWaitForever);
}
else
{
#if defined(osCMSIS_RTX)
systime_t n;
//Loop until the assigned time period has elapsed
do
{
//Limit the timeout value
n = MIN(timeout, 10000);
//Wait for the specified time interval
ret = osSemaphoreWait(semaphore->id, n);
//Decrement timeout value
timeout -= n;
//Check timeout value
} while(ret == 0 && timeout > 0);
#else
//Wait for the specified time interval
ret = osSemaphoreWait(semaphore->id, timeout);
#endif
}
#if defined(osCMSIS_RTX)
//Check return value
if(ret > 0)
return TRUE;
else
return FALSE;
#else
//Check return value
if(ret == osOK)
return TRUE;
else
return FALSE;
#endif
}
void test_thread(void const *name) {
while (true) {
osSemaphoreWait(two_slots, osWaitForever);
printf("%s\n\r", (const char*)name);
osDelay(1000);
osSemaphoreRelease(two_slots);
}
}
/*---------------------------------------------------------------------------*
* Routine: sys_arch_sem_wait
*---------------------------------------------------------------------------*
* Description:
* Blocks the thread while waiting for the semaphore to be
* signaled. If the "timeout" argument is non-zero, the thread should
* only be blocked for the specified time (measured in
* milliseconds).
*
* If the timeout argument is non-zero, the return value is the number of
* milliseconds spent waiting for the semaphore to be signaled. If the
* semaphore wasn't signaled within the specified time, the return value is
* SYS_ARCH_TIMEOUT. If the thread didn't have to wait for the semaphore
* (i.e., it was already signaled), the function may return zero.
*
* Notice that lwIP implements a function with a similar name,
* sys_sem_wait(), that uses the sys_arch_sem_wait() function.
* Inputs:
* sys_sem_t sem -- Semaphore to wait on
* u32_t timeout -- Number of milliseconds until timeout
* Outputs:
* u32_t -- Time elapsed or SYS_ARCH_TIMEOUT.
*---------------------------------------------------------------------------*/
u32_t sys_arch_sem_wait(sys_sem_t *sem, u32_t timeout) {
u32_t start = us_ticker_read();
if (osSemaphoreWait(sem->id, (timeout != 0)?(timeout):(osWaitForever)) < 1)
return SYS_ARCH_TIMEOUT;
return (us_ticker_read() - start) / 1000;
}
/*-----------------------------------------------------------------------------
Routine to Move the Balls
*----------------------------------------------------------------------------*/
void S_MoveBall (bool newBall){
uint8_t i;
uint8_t j;
if (newBall & (actualBallNumber < maxNumberBalls)){
ballArray[actualBallNumber][0] = plane_x+9;
ballArray[actualBallNumber][1] = plane_y+5;
actualBallNumber++;
}
for (i = 0; i < actualBallNumber; i++){
osSemaphoreWait (glcd_semaph_id, osWaitForever);
GLCD_SetForegroundColor (GLCD_COLOR_BLACK);
GLCD_DrawPixel (ballArray[i][0], ballArray[i][1]);
osSemaphoreRelease(glcd_semaph_id);
ballArray[i][0]+=2;
// If the new position exceed the limits, it will be erased from the array and it wont be drawn
if(ballArray[i][0] > GLCD_WIDTH ){
actualBallNumber--;
ballArray[i][0] = ballArray[actualBallNumber][0];
ballArray[i][1] = ballArray[actualBallNumber][1];
} else {
osSemaphoreWait (glcd_semaph_id, osWaitForever);
GLCD_SetForegroundColor (GLCD_COLOR_RED);
GLCD_DrawPixel (ballArray[i][0]+2, ballArray[i][1]);
osSemaphoreRelease(glcd_semaph_id);
}
// Object is deleted if hit by a ball
osMutexWait(objectVar_mutex_id, osWaitForever);
for (j = 0; j < objectNumb; j++){
if ( (ballArray[i][0] > objectArray[j][0]) & (ballArray[i][0] < objectArray[j][0]+9) & (ballArray[i][1] > objectArray[j][1]) & (ballArray[i][1] < objectArray[j][1]+9) ){
osSemaphoreWait (glcd_semaph_id, osWaitForever);
GLCD_SetForegroundColor (GLCD_COLOR_BLACK);
S_DrawStar (objectArray[j][0], objectArray[j][1]);
S_IncPlayerScore();
osSemaphoreRelease(glcd_semaph_id);
objectNumb--;
objectArray[j][0] = objectArray[objectNumb][0];
objectArray[j][1] = objectArray[objectNumb][1];
}
}
osMutexRelease(objectVar_mutex_id);
}
}
void BlinkTask(void const *argument)
{
if(osSemaphoreWait(semHandle, osWaitForever) == osOK) {
while(1) {
HAL_GPIO_TogglePin(GPIOD, GPIO_PIN_12);
osDelay(500);
}
}
}
/**
*@brief A function that gets the information recieved over wireless to be processed
*@param[inout] rxBuffer is the buffer to which the data is copied to
*@param[in] bufferSize The size of the passed in buffer
*@warning bufferSize must be of the same size as WIRELESS_BUFFER_SIZE, see wireless.h for details
*@retval None
*/
void getRecieved(uint8_t* rxBuffer, uint8_t bufferSize){
uint8_t i = 0;
for( i =0; i< bufferSize; i++){
osSemaphoreWait(rxId, osWaitForever);
rxBuffer[i] = rxWireless[i]; //Critical access portion
osSemaphoreRelease(rxId);
}
}
static void demo_task1(void *arg)
{
int count = 0;
while (1) {
osSemaphoreWait(pSem, 0xffffffff);
printf("demo_task1 get sem %d\n", count++);
};
}
CAN001_MessageHandleType* myCAN1_Get()
{
CAN001_MessageHandleType* pmsg;
if(can1rx.SendPos==can1rx.SendPos) osSemaphoreWait(can1rx_semaphore_id,osWaitForever);
pmsg=&can1rx.buf[can1rx.SendPos];
can1rx.SendPos++;
can1rx.SendPos&=(MAXLINE-1);
return pmsg;
}
/**
*@brief A function that safely access's the other board's accelerometer readings
*@param[inout] accValues A pointer to the new location in memory that data is copied to
*@retval None
*/
void getWirelessACCValues(float* accValues)
{
int i = 0;
for(i = 0; i < 3; i++){
osSemaphoreWait(wirelessAccId, osWaitForever);
accValues[i] = wirelessAccValues[i]; //Critical access portion
osSemaphoreRelease(wirelessAccId);
}
}
/*----------------------------------------------------------------------------
* Thread 2 - Normal Priority - looks for a free semaphore and uses
* the resource whenever it is available
*---------------------------------------------------------------------------*/
void thread2 (void const *argument) {
while (1) {
/* Wait indefinetly for a free semaphore */
osSemaphoreWait (semaphore, osWaitForever);
/* OK, the serial interface is free now, use it. */
printf ("Thread 2\n");
/* Return a token back to a semaphore. */
osSemaphoreRelease (semaphore);
}
}
/**
*@brief A function that safely access's the corrected values of the accelerometer
*@param[inout] accValues A pointer to the new location in memory that data is copied to
*@retval None
*/
void getACCValues(float* accValues)
{
int i = 0;
for(i = 0; i < 3; i++){
osSemaphoreWait(accId, osWaitForever);
accValues[i] = accCorrectedValues[i]; //Critical access portion
osSemaphoreRelease(accId);
}
}
/*!
@brief Thread to display temperature
@param argument Unused
*/
void temperature_DispFlag_thread(void const * argument)
{
// Extracts the semaphore object from the argument.
// This semaphore object was created in the main
osSemaphoreId* semaphore;
semaphore = (osSemaphoreId*)argument;
uint8_t ResourceLocked = 1; // Flag gets turned on if semaphore_lock achieved
uint32_t tokentemp; // Return of semwait
// Wait for the semaphore with 1ms timeout
osEvent event = osSignalWait(SIGNAL_DISP_TEMPERATURE, 1);
while(1)
{
tokentemp=osSemaphoreWait (*semaphore, osWaitForever);
ResourceLocked=1; // turn flag on if resource_locked
while (ResourceLocked)
{
// wait for a signal with 1ms timeout
event = osSignalWait(SIGNAL_DISP_TEMPERATURE, 1);
if (event.status == osEventTimeout)
{
// in case of timeout display
LCD_DisplayTemperature(temp);
}
else
{
// signal received which is not timeout
// clear the signal flag for the tilt display thread
osSignalClear (tilt_TurnDispFlag_thread, SIGNAL_DISP_TILT);
//clear the screen
LCD_clear_display();
// turn the resource_locked flag off
ResourceLocked = 0;
tokentemp=0;
// turn the flag to display the string "temperature" once
GLB_Temperature_display_flag=1;
// release the semaphore
osSemaphoreRelease(*semaphore);
//wait 5ms for the other thread to grab the semaphore
osDelay(5);
}
}
}
}
void S_Thread_MovePlane (void const *arg){
uint16_t plane_x_last = 1;
uint16_t plane_y_last = GLCD_HEIGHT/2;
uint16_t plane_x_i;
uint16_t plane_y_i;
uint8_t i;
while(!stopThreads){
osMutexWait(planeVar_mutex_id, osWaitForever);
plane_x_i = plane_x;
plane_y_i = plane_y;
osMutexRelease(planeVar_mutex_id);
if( (plane_x_last != plane_x_i) || (plane_y_last != plane_y_i) ){
osSemaphoreWait (glcd_semaph_id, osWaitForever);
S_DrawPlane(plane_x_last, plane_y_last, true); // Delete last position plane
S_DrawPlane(plane_x_i, plane_y_i, false); // Draw new position plane
osSemaphoreRelease(glcd_semaph_id);
plane_x_last = plane_x_i;
plane_y_last = plane_y_i;
}
osMutexWait(objectVar_mutex_id, osWaitForever);
for (i = 0; i < objectNumb; i++){
// If the square around the plane intersects with the square around the object: the plane is destroyed
if ( ( (objectArray[i][0]>(plane_x_i-9)) & (objectArray[i][0]<(plane_x_i+9)) ) &
( (objectArray[i][1]>(plane_y_i-9)) & (objectArray[i][1]<(plane_y_i+9)) ) ){
osSemaphoreWait (glcd_semaph_id, osWaitForever);
GLCD_SetForegroundColor (GLCD_COLOR_YELLOW);
S_DrawExplosion(plane_x_i, plane_y_i);
S_IncMachineScore();
osSemaphoreRelease(glcd_semaph_id);
}
}
osMutexRelease(objectVar_mutex_id);
osDelay(50);
}
}
/**
* @brief Thread function of LCD
* @param Not used
* @retval None
*/
void lcd_thread(void const * argument)
{
while (1)
{
osSemaphoreWait (lcd_semaphore, osWaitForever);
if (getThreadToRun() == MODE_1)
{
//Accelerometer mode
lcd_set_display_angles(getFilteredRollAngle(),getFilteredPitchAngle());
lcd_display_string(line1, line2);
}
}
}
int ff_req_grant ( /* TRUE:Got a grant to access the volume, FALSE:Could not get a grant */
_SYNC_t sobj /* Sync object to wait */
)
{
int ret = 0;
if(osSemaphoreWait(sobj, _FS_TIMEOUT) == osOK)
{
ret = 1;
}
return ret;
}
/**
* @brief Semaphore Test.
* @param argument: Not used
* @retval None
*/
static void SemaphoreTest(void const *argument)
{
for(;;)
{
if (osSemaphore != NULL)
{
/* Try to obtain the semaphore */
if(osSemaphoreWait(osSemaphore , 0) == osOK)
{
BSP_LED_Toggle(LED1);
}
}
}
}
void SPI_DMA_xfer(uint8_t* write_buff, uint8_t* read_buff, GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, int numByte){
// sema will be released in interrupt
osSemaphoreWait(dmaSema_ID, osWaitForever);
//set chip select low
GPIO_ResetBits(GPIOx, GPIO_Pin);
// wait for slave
//while(GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_6) != Bit_RESET);
DMA2_Stream0->M0AR = (uint32_t)(&read_buff[0]);
DMA2_Stream3->M0AR = (uint32_t)(&write_buff[0]);
DMA2_Stream0->NDTR = numByte;
DMA2_Stream3->NDTR = numByte;
osDelay(10);
DMA2_Stream0->CR |= DMA_SxCR_EN;
DMA2_Stream3->CR |= DMA_SxCR_EN;
osSemaphoreWait(dmaComplete_ID, osWaitForever);
GPIO_SetBits(GPIOx, GPIO_Pin);
osSemaphoreRelease(dmaSema_ID);
}
