int main(void){
uint16_t dat_p;
// set the clock speed to 8MHz
// set the clock prescaler. First write CLKPCE to enable setting of clock the
// next four instructions.
CLKPR=(1<<CLKPCE);
CLKPR=0; // 8 MHZ
_delay_loop_1(0); // 60us
//initialize the hardware driver for the enc28j60
enc28j60Init(mymac);
//enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(0); // 60us
enc28j60PhyWrite(PHLCON,0x476);
PORTB = 0xff;
DDRB = 0xff;
uart_init();
sei();
xfunc_out = (void (*)(char))uart_put;
xputs(PSTR("AVR-Ethernet test monitor\n"));
xprintf(PSTR("ENC28J60 Rev.%d\n"), enc28j60getrev());
//init the ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
while(1){
// read packet, handle ping and wait for a tcp packet:
dat_p=packetloop_icmp_tcp(buf,enc28j60PacketReceive(BUFFER_SIZE, buf));
/* dat_p will be unequal to zero if there is a valid
* http get */
if(dat_p==0){
// no http request
continue;
}
// tcp port 80 begin
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
// head, post and other methods:
dat_p=http200ok();
dat_p=fill_tcp_data_p(buf,dat_p,PSTR("<h1>200 OK</h1>"));
goto SENDTCP;
}
// just one web page in the "root directory" of the web server
if (strncmp("/ ",(char *)&(buf[dat_p+4]),2)==0){
dat_p=print_webpage(buf);
goto SENDTCP;
}else{
dat_p=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
SENDTCP:
www_server_reply(buf,dat_p); // send web page data
// tcp port 80 end
}
return (0);
}
// Perform all processing to resolve a hostname to IP address.
// Returns 1 for successful Name resolution, 0 otherwise
uint8_t EtherShield::resolveHostname(uint8_t *buf, uint16_t buffer_size, uint8_t *hostname ) {
uint16_t dat_p;
int plen = 0;
long lastDnsRequest = millis();
uint8_t dns_state = DNS_STATE_INIT;
boolean gotAddress = false;
uint8_t dnsTries = 3; // After 10 attempts fail gracefully so other action can be carried out
while( !gotAddress ) {
// handle ping and wait for a tcp packet
plen = enc28j60PacketReceive(buffer_size, buf);
dat_p=packetloop_icmp_tcp(buf,plen);
// We have a packet
// Check if IP data
if (dat_p == 0) {
if (client_waiting_gw() ) {
// No ARP received for gateway
continue;
}
// It has IP data
if (dns_state==DNS_STATE_INIT) {
dns_state=DNS_STATE_REQUESTED;
lastDnsRequest = millis();
dnslkup_request(buf,hostname);
continue;
}
if (dns_state!=DNS_STATE_ANSWER){
// retry every minute if dns-lookup failed:
if (millis() > (lastDnsRequest + 60000L) ){
if( --dnsTries <= 0 )
return 0; // Failed to allocate address
dns_state=DNS_STATE_INIT;
lastDnsRequest = millis();
}
// don't try to use client before
// we have a result of dns-lookup
continue;
}
}
else {
if (dns_state==DNS_STATE_REQUESTED && udp_client_check_for_dns_answer( buf, plen ) ){
dns_state=DNS_STATE_ANSWER;
//client_set_wwwip(dnslkup_getip());
client_tcp_set_serverip(dnslkup_getip());
gotAddress = true;
}
}
}
return 1;
}
// Perform all processing to get an IP address plus other addresses returned, e.g. gw, dns, dhcp server.
// Returns 1 for successful IP address allocation, 0 otherwise
uint8_t EtherShield::allocateIPAddress(uint8_t *buf, uint16_t buffer_size, uint8_t *mymac, uint16_t myport, uint8_t *myip, uint8_t *mynetmask, uint8_t *gwip, uint8_t *dnsip, uint8_t *dhcpsvrip ) {
uint16_t dat_p;
int plen = 0;
long lastDhcpRequest = millis();
uint8_t dhcpState = 0;
boolean gotIp = false;
uint8_t dhcpTries = 10; // After 10 attempts fail gracefully so other action can be carried out
dhcp_start( buf, mymac, myip, mynetmask,gwip, dnsip, dhcpsvrip );
while( !gotIp ) {
// handle ping and wait for a tcp packet
plen = enc28j60PacketReceive(buffer_size, buf);
dat_p=packetloop_icmp_tcp(buf,plen);
if(dat_p==0) {
int retstat = check_for_dhcp_answer( buf, plen);
dhcpState = dhcp_state();
// we are idle here
if( dhcpState != DHCP_STATE_OK ) {
if (millis() > (lastDhcpRequest + 10000L) ){
lastDhcpRequest = millis();
if( --dhcpTries <= 0 )
return 0; // Failed to allocate address
// send dhcp
dhcp_start( buf, mymac, myip, mynetmask,gwip, dnsip, dhcpsvrip );
}
} else {
if( !gotIp ) {
gotIp = true;
//init the ethernet/ip layer:
init_ip_arp_udp_tcp(mymac, myip, myport);
// Set the Router IP
client_set_gwip(gwip); // e.g internal IP of dsl router
// Set the DNS server IP address if required, or use default
dnslkup_set_dnsip( dnsip );
}
}
}
}
return 1;
}
uint16_t EtherShield::ES_packetloop_icmp_tcp(uint8_t *buf,uint16_t plen) {
return packetloop_icmp_tcp(buf,plen);
}
int main(void){
uint16_t dat_p,plen;
int8_t cmd;
// Set the clock speed to "no pre-scaler" (8MHz with internal osc or
// full external speed)
// set the clock prescaler. First write CLKPCE to enable setting
// of clock the next four instructions.
// Note that the CKDIV8 Fuse determines the initial
// value of the CKKPS bits.
CLKPR=(1<<CLKPCE); // change enable
CLKPR=0; // "no pre-scaler"
_delay_loop_1(0); // 60us
/*initialize enc28j60*/
enc28j60Init(mymac);
enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(0); // 60us
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDB=yellow LEDA=green
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
DDRB|= (1<<DDB1); // LED, enable PB1, LED as output
LEDOFF;
DDRD&= ~(1<<DDD6); // enable PB6, as input
PORTD|= (1<<PIND6); // internal pullup resistor on
init_cnt2();
sei();
//init the web server ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
// init the web client:
client_set_gwip(gwip); // e.g internal IP of dsl router
//
while(1){
// handle ping and wait for a tcp packet
plen=enc28j60PacketReceive(BUFFER_SIZE, buf);
dat_p=packetloop_icmp_tcp(buf,plen);
if(plen==0){
// we are idle here
if (client_waiting_gw() ){
continue;
}
if (dns_state==0){
sec=0;
dns_state=1;
dnslkup_request(buf,PSTR(WEBSERVER_VHOST));
continue;
}
if (dns_state==1 && dnslkup_haveanswer()){
dns_state=2;
client_set_wwwip(dnslkup_getip());
}
if (dns_state!=2){
// retry every minute if dns-lookup failed:
if (sec > 60){
dns_state=0;
}
// don't try to use web client before
// we have a result of dns-lookup
continue;
}
//----------
if (start_web_client==1){
LEDON;
start_web_client=2;
sec=0;
web_client_attempts++;
// the identi.ca line is status=Url_encoded_string
strcat(statusstr,"status=");
// the text to send to identi.ca (append after status=):
//urlencode("Meals are ready",&(statusstr[7]));
urlencode("I like tuxgraphics eth boards, ",&(statusstr[7]));
// append a number:
itoa(web_client_attempts,&(statusstr[strlen(statusstr)]),10);
// The BLOGGACCOUNT Authorization code can be generated from
// username and password of your identi.ca account
// by using this encoder: http://tuxgraphics.org/~guido/javascript/base64-javascript.html
client_http_post(PSTR("/api/statuses/update.xml"),PSTR(WEBSERVER_VHOST),PSTR(BLOGGACCOUNT),statusstr,&browserresult_callback);
}
// count how often the switch was triggered at all:
if (contact_debounce==0 && bit_is_clear(PIND,PIND6)){
contact_onoff_cnt++;
contact_debounce=1;
}
// we send only a request if we are in the right state (do
// not flood with request):
if (start_web_client==0 && bit_is_clear(PIND,PIND6)){
resend=1; // resend once if it failed
start_web_client=1;
}
// Reset after a delay of 3 min to prevent email sending.
// We reset only if the contact on PD6 was released.
if (start_web_client<=3 && sec==180 && !bit_is_clear(PIND,PIND6)){
start_web_client=0;
}
// Resend the message if it failed:
if (start_web_client==2 && sec==7 && resend){
start_web_client=1;
resend--;
}
continue;
}
if(dat_p==0){ // plen!=0
// check for incomming messages not processed
// as part of packetloop_icmp_tcp, e.g udp messages
udp_client_check_for_dns_answer(buf,plen);
continue;
}
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
// head, post and other methods:
//
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
dat_p=http200ok();
dat_p=fill_tcp_data_p(buf,dat_p,PSTR("<h1>200 OK</h1>"));
goto SENDTCP;
}
cmd=analyse_get_url((char *)&(buf[dat_p+4]));
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
if (cmd==-1){
dat_p=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
if (cmd==1 && start_web_client==4){
// email was off, switch on
start_web_client=0;
}
if (cmd==0 ){
start_web_client=4; // email off
}
dat_p=http200ok();
dat_p=print_webpage(buf);
//
SENDTCP:
www_server_reply(buf,dat_p); // send data
}
return (0);
}
int main(void){
uint16_t dat_p;
int8_t cmd;
// Set the clock speed to "no pre-scaler" (8MHz with internal osc or
// full external speed)
// set the clock prescaler. First write CLKPCE to enable setting
// of clock the next four instructions.
// Note that the CKDIV8 Fuse determines the initial
// value of the CKKPS bits.
CLKPR=(1<<CLKPCE); // change enable
CLKPR=0; // "no pre-scaler"
_delay_loop_1(0); // 60us
/*initialize enc28j60*/
enc28j60Init(mymac);
enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(0); // 60us
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDB=yellow LEDA=green
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
DDRB|= (1<<DDB1); // LED, enable PB1, LED as output
LEDOFF;
DDRD&= ~(1<<DDD6); // enable PB6, as input
PORTD|= (1<<PIND6); // internal pullup resistor on
init_cnt2();
sei();
//init the web server ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
// init the web client:
client_set_gwip(gwip); // e.g internal IP of dsl router
client_set_wwwip(websrvip);
//
while(1){
// handle ping and wait for a tcp packet
dat_p=packetloop_icmp_tcp(buf,enc28j60PacketReceive(BUFFER_SIZE, buf));
if(dat_p==0){
if (start_web_client==1){
LEDON;
start_web_client=2;
sec=0;
web_client_attempts++;
// the text to send in the body of the mail:
urlencode("The door is open",urlvarstr);
// The string "test+emailnotify" is the subject line
// of the email. A plus sign translates into a space character.
// The MMaccountID is gus123, edit and replace by your own.
client_browse_url(PSTR("/cgi-bin/mm?a=gus123&s=test+emailnotify&d="),urlvarstr,PSTR(WEBSERVER_VHOST),&browserresult_callback);
}
// count how often the switch was triggered at all:
if (contact_debounce==0 && bit_is_clear(PIND,PIND6)){
contact_onoff_cnt++;
contact_debounce=1;
}
// we send only an email if we are in the right state (do
// not flood with email):
if (start_web_client==0 && bit_is_clear(PIND,PIND6)){
resend=1; // resend once if it failed
start_web_client=1;
}
// Reset after a delay of 3 min to prevent email sending.
// We reset only if the contact on PD6 was released.
if (start_web_client<=3 && sec==180 && !bit_is_clear(PIND,PIND6)){
start_web_client=0;
}
// Resend the email if it failed:
if (start_web_client==2 && sec==7 && resend){
start_web_client=1;
resend--;
}
continue;
}
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
// head, post and other methods:
//
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
dat_p=http200ok();
dat_p=fill_tcp_data_p(buf,dat_p,PSTR("<h1>200 OK</h1>"));
goto SENDTCP;
}
cmd=analyse_get_url((char *)&(buf[dat_p+4]));
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
if (cmd==-1){
dat_p=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
if (cmd==1 && start_web_client==4){
// email was off, switch on
start_web_client=0;
}
if (cmd==0 ){
start_web_client=4; // email off
}
dat_p=http200ok();
dat_p=print_webpage(buf);
//
SENDTCP:
www_server_reply(buf,dat_p); // send data
}
return (0);
}
/**
* Handle Modbus requests
* Checks for new TCP data and looks for new modbus messages
**/
void mb_handleRequest(void) {
// read packet, handle ping and wait for a tcp packet
uint16_t dat_p = packetloop_icmp_tcp(buf,enc28j60PacketReceive(BUFFER_SIZE, buf));
// check if data was received
if (dat_p == 0)
return;
// make structure pointer to buffer
modbusmsg_t* msg = (modbusmsg_t*)&buf[dat_p];
// check for modbus protocol id
if (FROM_UINT16(msg->mbap.protoId) > 0)
return;
uint16_t len;
switch (msg->function) {
// Modbus read function
case MB_FUNC_READREG: {
readreg_req_t* req = (readreg_req_t*)&(msg->function);
readreg_res_t* res = (readreg_res_t*)&(msg->function);
uint16_t amount = FROM_UINT16(req->amount);
uint16_t addr = FROM_UINT16(req->start_address);
if (amount == 0 || amount > 0x7D) {
len = mb_set_error(msg,MB_ERR_DATA);
break;
}
if (addr + amount <= MODBUS_REGISTER_COUNT) {
uint16_t *ptr = (uint16_t*)&(res->function);
uint16_t cnt = 0;
for (; cnt < amount; cnt++) {
if (registers[addr+cnt] == NULL) {
len = mb_set_error(msg,MB_ERR_PROC);
break;
}
++ptr;
*ptr = TO_UINT16(*(registers[addr+cnt]));
}
// if an error occurred
if (cnt < amount)
break;
res->bytecount = cnt*sizeof(uint16_t);
len = sizeof(readreg_res_t)+cnt*sizeof(uint16_t);
} else
len = mb_set_error(msg,MB_ERR_ADDR);
break;
}
// Modbus write function
case MB_FUNC_WRITEREG: {
writereg_req_t* req = (writereg_req_t*)&(msg->function);
uint16_t addr = FROM_UINT16(req->start_address);
uint16_t value = FROM_UINT16(req->value);
if (addr >= MODBUS_REGISTER_COUNT || writecbs[addr] == NULL) {
len = mb_set_error(msg,MB_ERR_ADDR);
break;
}
if (writecbs[addr](addr,value))
len = sizeof(writereg_req_t);
else
len = mb_set_error(msg,MB_ERR_PROC);
break;
}
// Modbus device id function
// Not implemented completely
case MB_FUNC_DEV_ID: {
devid_req_t* req = (devid_req_t*)&(msg->function);
devid_res_t* res = (devid_res_t*)&(msg->function);
devid_obj_t* obj = (devid_obj_t*)&(res->nextobjid);
uint8_t i = req->objid;
if (req->type != 0x0E) {
len = mb_set_error(msg,MB_ERR_FUNC);
break;
}
if (!req->code || req->code > 4) {
len = mb_set_error(msg,MB_ERR_DATA);
break;
}
res->conflevel = 0x01;
res->more = 0x00;
res->nextobjid = 0x00;
res->amount = 3;
len = sizeof(devid_res_t);
if (i > 2)
i = 0;
// add requested objects
for (; i < 3; i++) {
++obj;
obj->id = i;
obj->length = 0;
len += sizeof(devid_obj_t)+obj->length;
}
break;
}
default: // set error
len = mb_set_error(msg,MB_ERR_FUNC);
break;
}
msg->mbap.length = TO_UINT16(len+1);
// send response
www_server_reply(buf,sizeof(mbap_t)+len);
}
int main(void){
uint16_t plen;
uint16_t dat_p;
//uint8_t cmd_pos=0;
int8_t cmd;
//uint8_t payloadlen=0;
//char str[20];
//char cmdval;
//char req[16];
//char i;
DATA_DAIKIN daikin;
// set the clock speed to "no pre-scaler" (8MHz with internal osc or
// full external speed)
// set the clock prescaler. First write CLKPCE to enable setting
// of clock the next four instructions.
// Note that the CKDIV8 Fuse determines the initial
// value of the CKKPS bits.
CLKPR=(1<<CLKPCE); // change enable
CLKPR=0; // "no pre-scaler"
_delay_loop_1(0); // 60us
/*initialize enc28j60*/
enc28j60Init(mymac);
//enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(0); // 60us
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDB=yellow LEDA=green
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
//DDRB|= (1<<DDB1); // enable PB1, LED as output
// the transistor on PD7:
//DDRD|= (1<<DDD7);
//PORTD &= ~(1<<PORTD7);// transistor off
//PORTB = 0xff;
//DDRB = 0xff;
init_power_settings();
uart_init();
init_ir();
init_airController(&daikin);
sei();
xfunc_out = (void (*)(char))uart_put;
xputs(PSTR("AVR-Ethernet test monitor\n"));
xprintf(PSTR("ENC28J60 Rev.%d\n"), enc28j60getrev());
xprintf(PSTR("PRR=%02X\n"),PRR);
//init the web server ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
while(1){
// handle ping and wait for a tcp packet
plen=enc28j60PacketReceive(BUFFER_SIZE, buf);
buf[BUFFER_SIZE]='\0';
dat_p=packetloop_icmp_tcp(buf,plen);
if(dat_p==0){
// check if udp otherwise continue
goto UDP;
}
// send data everytime we get a http request
xprintf(PSTR("get http request\n"));
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
xprintf(PSTR("'GET \n'"));
// head, post and other methods:
//
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
plen=http200ok();
plen=fill_tcp_data_p(buf,plen,PSTR("<h1>200 OK</h1>"));
goto SENDTCP;
}
if (strncmp("/ ",(char *)&(buf[dat_p+4]),2)==0){
plen=http200ok();
plen=fill_tcp_data_p(buf,plen,PSTR("<p>Usage: http://host_or_ip/pc or m</p>\n"));
goto SENDTCP;
}
if ((strncmp("/pc ",(char *)&(buf[dat_p+4]),4)==0)
|| (strncmp("/pc/ ",(char *)&(buf[dat_p+4]),5)==0)){
plen=http200ok();
plen=fill_tcp_data_p(buf,plen,pc_html);
goto SENDTCP;
}
if ((strncmp("/m ",(char *)&(buf[dat_p+4]),3)==0)
|| (strncmp("/m/ ",(char *)&(buf[dat_p+4]),4)==0)){
plen=http200ok();
plen=fill_tcp_data_p(buf,plen,mobile_html);
goto SENDTCP;
}
// GET /ir?power=on&temp=28
if (strncmp("/ir?",(char *)&(buf[dat_p+4]),4)==0){
if(find_key_val(
(char *)&(buf[dat_p+8]),
gStrbuf,
5,
"power"
)
) {
xprintf(PSTR("power=%s\n"),gStrbuf);
if(strncmp("on", gStrbuf, 2) == 0){
airController_on(&daikin);
setData(DAIKIN, daikin.buf, 35*8);
}else if(strncmp("off", gStrbuf, 3) == 0){
airController_off(&daikin);
setData(DAIKIN, daikin.buf, 35*8);
}
}
if(find_key_val(
(char *)&(buf[dat_p+8]),
gStrbuf,
4,
"temp"
)
) {
xprintf(PSTR("temp=%s\n"),gStrbuf);
airController_setTemp(&daikin, atoi(gStrbuf));
setData(DAIKIN, daikin.buf, 35*8);
}
plen=http200ok();
plen=fill_tcp_data_p(buf,plen,PSTR("Done\n"));
goto SENDTCP;
}
cmd=analyse_get_url((char *)&(buf[dat_p+4]));
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
if (cmd==-1){
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
if (cmd==1){
//PORTD|= (1<<PORTD7);// transistor on
}
if (cmd==0){
//PORTD &= ~(1<<PORTD7);// transistor off
}
if (cmd==2){
// favicon:
//plen=moved_perm(buf,0);
goto SENDTCP;
}
if (cmd==-2){
// redirect to the right base url (e.g add a trailing slash):
plen=moved_perm(buf,1);
goto SENDTCP;
}
// if (cmd==-2) or any other value
// just display the status:
//plen=print_webpage(buf,/*(PORTD & (1<<PORTD7))*/0);
//
SENDTCP:
www_server_reply(buf,plen); // send data
continue;
// tcp port www end
// -------------------------------
// udp start, we listen on udp port 1200=0x4B0
UDP:
// xprintf(PSTR("here is UDP:\n"));
// check if ip packets are for us:
if(eth_type_is_ip_and_my_ip(buf,plen)==0){
// xprintf(PSTR("here is eth_type_is_ip_andd_my_ip\n"));
continue;
}
/*if (buf[IP_PROTO_P]==IP_PROTO_UDP_V&&buf[UDP_DST_PORT_H_P]==(MYUDPPORT>>8)&&buf[UDP_DST_PORT_L_P]==(MYUDPPORT&0xff)){
payloadlen=buf[UDP_LEN_L_P]-UDP_HEADER_LEN;
// you must sent a string starting with v
// e.g udpcom version 10.0.0.24
if (verify_password((char *)&(buf[UDP_DATA_P]))){
// find the first comma which indicates
// the start of a command:
cmd_pos=0;
while(cmd_pos<payloadlen){
cmd_pos++;
if (buf[UDP_DATA_P+cmd_pos]==','){
cmd_pos++; // put on start of cmd
break;
}
}
// a command is one char and a value. At
// least 3 characters long. It has an '=' on
// position 2:
if (cmd_pos<2 || cmd_pos>payloadlen-3 || buf[UDP_DATA_P+cmd_pos+1]!='='){
strcpy(str,"e=no_cmd");
goto ANSWER;
}
// supported commands are
// t=1 t=0 t=?
if (buf[UDP_DATA_P+cmd_pos]=='t'){
cmdval=buf[UDP_DATA_P+cmd_pos+2];
if(cmdval=='1'){
PORTD|= (1<<PORTD7);// transistor on
strcpy(str,"t=1");
goto ANSWER;
}else if(cmdval=='0'){
PORTD &= ~(1<<PORTD7);// transistor off
strcpy(str,"t=0");
goto ANSWER;
}else if(cmdval=='?'){
if (PORTD & (1<<PORTD7)){
strcpy(str,"t=1");
goto ANSWER;
}
strcpy(str,"t=0");
goto ANSWER;
}
}
strcpy(str,"e=inv_cmd");
goto ANSWER;
}
strcpy(str,"e=inv_pw");
ANSWER:
make_udp_reply_from_request(buf,str,strlen(str),MYUDPPORT);
}*/
}
return (0);
}
