static int musb_set_clock(struct clk *clk, int state)
{
if (state) {
if (clk_on > 0)
return -ENODEV;
phy_enable();
clk_enable(clk);
clk_on = 1;
} else {
if (clk_on == 0)
return -ENODEV;
clk_disable(clk);
phy_disable();
clk_on = 0;
}
return 0;
}
static int
enable_fdt_resources(struct tegra_ahci_sc *sc)
{
int rv;
rv = regulator_enable(sc->supply_hvdd);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable 'hvdd' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_vddio);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable 'vddio' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_avdd);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable 'avdd' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_target_5v);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'target-5v' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_target_12v);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'sc->target-12v' regulator\n");
return (rv);
}
/* Stop clocks */
clk_stop(sc->clk_sata);
clk_stop(sc->clk_sata_oob);
tegra_powergate_power_off(TEGRA_POWERGATE_SAX);
rv = hwreset_assert(sc->hwreset_sata);
if (rv != 0) {
device_printf(sc->dev, "Cannot assert 'sata' reset\n");
return (rv);
}
rv = hwreset_assert(sc->hwreset_sata_oob);
if (rv != 0) {
device_printf(sc->dev, "Cannot assert 'sata oob' reset\n");
return (rv);
}
rv = hwreset_assert(sc->hwreset_sata_cold);
if (rv != 0) {
device_printf(sc->dev, "Cannot assert 'sata cold' reset\n");
return (rv);
}
rv = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SAX,
sc->clk_sata, sc->hwreset_sata);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable 'SAX' powergate\n");
return (rv);
}
rv = clk_enable(sc->clk_sata_oob);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable 'sata oob' clock\n");
return (rv);
}
rv = clk_enable(sc->clk_cml);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable 'cml' clock\n");
return (rv);
}
rv = clk_enable(sc->clk_pll_e);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable 'pll e' clock\n");
return (rv);
}
rv = hwreset_deassert(sc->hwreset_sata_cold);
if (rv != 0) {
device_printf(sc->dev, "Cannot unreset 'sata cold' reset\n");
return (rv);
}
rv = hwreset_deassert(sc->hwreset_sata_oob);
if (rv != 0) {
device_printf(sc->dev, "Cannot unreset 'sata oob' reset\n");
return (rv);
}
rv = phy_enable(sc->dev, sc->phy);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable SATA phy\n");
return (rv);
}
return (0);
}
static int
enable_fdt_resources(struct tegra_xhci_softc *sc)
{
int rv;
rv = hwreset_assert(sc->hwreset_xusb_host);
if (rv != 0) {
device_printf(sc->dev, "Cannot reset 'xusb_host' reset\n");
return (rv);
}
rv = hwreset_assert(sc->hwreset_xusb_ss);
if (rv != 0) {
device_printf(sc->dev, "Cannot reset 'xusb_ss' reset\n");
return (rv);
}
rv = regulator_enable(sc->supply_avddio_pex);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'avddio_pex' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_dvddio_pex);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'dvddio_pex' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_avdd_usb);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'avdd_usb' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_avdd_pll_utmip);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'avdd_pll_utmip-5v' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_avdd_pll_erefe);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'avdd_pll_erefe' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_avdd_usb_ss_pll);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'avdd_usb_ss_pll' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_hvdd_usb_ss);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'hvdd_usb_ss' regulator\n");
return (rv);
}
rv = regulator_enable(sc->supply_hvdd_usb_ss_pll_e);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'hvdd_usb_ss_pll_e' regulator\n");
return (rv);
}
/* Power off XUSB host and XUSB SS domains. */
rv = tegra_powergate_power_off(TEGRA_POWERGATE_XUSBA);
if (rv != 0) {
device_printf(sc->dev, "Cannot powerdown 'xusba' domain\n");
return (rv);
}
rv = tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC);
if (rv != 0) {
device_printf(sc->dev, "Cannot powerdown 'xusbc' domain\n");
return (rv);
}
/* Setup XUSB ss_src clock first */
clk_set_freq(sc->clk_xusb_ss, TEGRA_XHCI_SS_HIGH_SPEED, 0);
if (rv != 0)
return (rv);
/* The XUSB gate clock must be enabled before XUSBA can be powered. */
rv = clk_enable(sc->clk_xusb_gate);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'xusb_gate' clock\n");
return (rv);
}
/* Power on XUSB host and XUSB SS domains. */
rv = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBC,
sc->clk_xusb_host, sc->hwreset_xusb_host);
if (rv != 0) {
device_printf(sc->dev, "Cannot powerup 'xusbc' domain\n");
return (rv);
}
rv = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBA,
sc->clk_xusb_ss, sc->hwreset_xusb_ss);
if (rv != 0) {
device_printf(sc->dev, "Cannot powerup 'xusba' domain\n");
return (rv);
}
/* Enable rest of clocks */
rv = clk_enable(sc->clk_xusb_falcon_src);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'xusb_falcon_src' clock\n");
return (rv);
}
rv = clk_enable(sc->clk_xusb_fs_src);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'xusb_fs_src' clock\n");
return (rv);
}
rv = clk_enable(sc->clk_xusb_hs_src);
if (rv != 0) {
device_printf(sc->dev,
"Cannot enable 'xusb_hs_src' clock\n");
return (rv);
}
rv = phy_enable(sc->phy_usb2_0);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable USB2_0 phy\n");
return (rv);
}
rv = phy_enable(sc->phy_usb2_1);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable USB2_1 phy\n");
return (rv);
}
rv = phy_enable(sc->phy_usb2_2);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable USB2_2 phy\n");
return (rv);
}
rv = phy_enable(sc->phy_usb3_0);
if (rv != 0) {
device_printf(sc->dev, "Cannot enable USB3_0 phy\n");
return (rv);
}
return (0);
}
static int
xhci_attach(device_t dev)
{
struct xhci_softc *sc = device_get_softc(dev);
int err = 0, rid = 0;
#ifdef EXT_RESOURCES
phandle_t node;
phy_t phy;
#endif
sc->sc_bus.parent = dev;
sc->sc_bus.devices = sc->sc_devices;
sc->sc_bus.devices_max = XHCI_MAX_DEVICES;
sc->sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->sc_io_res == NULL) {
device_printf(dev, "Failed to map memory\n");
xhci_detach(dev);
return (ENXIO);
}
sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = rman_get_size(sc->sc_io_res);
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(dev, "Failed to allocate IRQ\n");
xhci_detach(dev);
return (ENXIO);
}
#ifdef EXT_RESOURCES
node = ofw_bus_get_node(dev);
if (phy_get_by_ofw_property(dev, node, "usb-phy", &phy) == 0)
if (phy_enable(phy) != 0)
device_printf(dev, "Cannot enable phy\n");
#endif
sc->sc_bus.bdev = device_add_child(dev, "usbus", -1);
if (sc->sc_bus.bdev == NULL) {
device_printf(dev, "Failed to add USB device\n");
xhci_detach(dev);
return (ENXIO);
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
sprintf(sc->sc_vendor, XHCI_HC_VENDOR);
device_set_desc(sc->sc_bus.bdev, XHCI_HC_DEVSTR);
err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
if (err != 0) {
device_printf(dev, "Failed to setup error IRQ, %d\n", err);
sc->sc_intr_hdl = NULL;
xhci_detach(dev);
return (err);
}
err = xhci_init(sc, dev, IS_DMA_32B);
if (err != 0) {
device_printf(dev, "Failed to init XHCI, with error %d\n", err);
xhci_detach(dev);
return (ENXIO);
}
err = xhci_start_controller(sc);
if (err != 0) {
device_printf(dev, "Failed to start XHCI controller, with error %d\n", err);
xhci_detach(dev);
return (ENXIO);
}
err = device_probe_and_attach(sc->sc_bus.bdev);
if (err != 0) {
device_printf(dev, "Failed to initialize USB, with error %d\n", err);
xhci_detach(dev);
return (ENXIO);
}
return (0);
}
