void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target)
{
#if GICV2_G0_FOR_EL3
int id;
/* Target must be a valid MPIDR in the system */
id = plat_core_pos_by_mpidr(target);
assert(id >= 0);
/* Verify that this is a secure SGI */
assert(plat_ic_get_interrupt_type(sgi_num) == INTR_TYPE_EL3);
gicv2_raise_sgi(sgi_num, id);
#else
assert(false);
#endif
}
/*******************************************************************************
* This function is the handler registered for S-EL1 interrupts by the
* OPTEED. It validates the interrupt and upon success arranges entry into
* the OPTEE at 'optee_fiq_entry()' for handling the interrupt.
******************************************************************************/
static uint64_t opteed_sel1_interrupt_handler(uint32_t id,
uint32_t flags,
void *handle,
void *cookie)
{
uint32_t linear_id;
uint64_t mpidr;
optee_context_t *optee_ctx;
/* Check the security state when the exception was generated */
assert(get_interrupt_src_ss(flags) == NON_SECURE);
#if IMF_READ_INTERRUPT_ID
/* Check the security status of the interrupt */
assert(plat_ic_get_interrupt_type(id) == INTR_TYPE_S_EL1);
#endif
/* Sanity check the pointer to this cpu's context */
mpidr = read_mpidr();
assert(handle == cm_get_context(NON_SECURE));
/* Save the non-secure context before entering the OPTEE */
cm_el1_sysregs_context_save(NON_SECURE);
/* Get a reference to this cpu's OPTEE context */
linear_id = platform_get_core_pos(mpidr);
optee_ctx = &opteed_sp_context[linear_id];
assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE));
cm_set_elr_el3(SECURE, (uint64_t)&optee_vectors->fiq_entry);
cm_el1_sysregs_context_restore(SECURE);
cm_set_next_eret_context(SECURE);
/*
* Tell the OPTEE that it has to handle an FIQ (synchronously).
* Also the instruction in normal world where the interrupt was
* generated is passed for debugging purposes. It is safe to
* retrieve this address from ELR_EL3 as the secure context will
* not take effect until el3_exit().
*/
SMC_RET1(&optee_ctx->cpu_ctx, read_elr_el3());
}
/*******************************************************************************
* This function is the handler registered for S-EL1 interrupts by the TSPD. It
* validates the interrupt and upon success arranges entry into the TSP at
* 'tsp_fiq_entry()' for handling the interrupt.
******************************************************************************/
static uint64_t tspd_ns_interrupt_handler(uint32_t id,
uint32_t flags,
void *handle,
void *cookie)
{
/* Check the security state when the exception was generated */
assert(get_interrupt_src_ss(flags) == SECURE);
#if IMF_READ_INTERRUPT_ID
/* Check the security status of the interrupt */
assert(plat_ic_get_interrupt_type(id) == INTR_TYPE_NS);
#endif
/*
* Disable the routing of NS interrupts from secure world to EL3 while
* interrupted on this core.
*/
disable_intr_rm_local(INTR_TYPE_NS, SECURE);
return tspd_handle_sp_preemption(handle);
}
/*******************************************************************************
* This function is the handler registered for S-EL1 interrupts by the TSPD. It
* validates the interrupt and upon success arranges entry into the TSP at
* 'tsp_fiq_entry()' for handling the interrupt.
******************************************************************************/
static uint64_t tspd_sel1_interrupt_handler(uint32_t id,
uint32_t flags,
void *handle,
void *cookie)
{
uint32_t linear_id;
tsp_context_t *tsp_ctx;
/* Check the security state when the exception was generated */
assert(get_interrupt_src_ss(flags) == NON_SECURE);
#if IMF_READ_INTERRUPT_ID
/* Check the security status of the interrupt */
assert(plat_ic_get_interrupt_type(id) == INTR_TYPE_S_EL1);
#endif
/* Sanity check the pointer to this cpu's context */
assert(handle == cm_get_context(NON_SECURE));
/* Save the non-secure context before entering the TSP */
cm_el1_sysregs_context_save(NON_SECURE);
/* Get a reference to this cpu's TSP context */
linear_id = plat_my_core_pos();
tsp_ctx = &tspd_sp_context[linear_id];
assert(&tsp_ctx->cpu_ctx == cm_get_context(SECURE));
/*
* Determine if the TSP was previously preempted. Its last known
* context has to be preserved in this case.
* The TSP should return control to the TSPD after handling this
* FIQ. Preserve essential EL3 context to allow entry into the
* TSP at the FIQ entry point using the 'cpu_context' structure.
* There is no need to save the secure system register context
* since the TSP is supposed to preserve it during S-EL1 interrupt
* handling.
*/
if (get_std_smc_active_flag(tsp_ctx->state)) {
tsp_ctx->saved_spsr_el3 = SMC_GET_EL3(&tsp_ctx->cpu_ctx,
CTX_SPSR_EL3);
tsp_ctx->saved_elr_el3 = SMC_GET_EL3(&tsp_ctx->cpu_ctx,
CTX_ELR_EL3);
#if TSPD_ROUTE_IRQ_TO_EL3
/*Need to save the previously interrupted secure context */
memcpy(&tsp_ctx->sp_ctx, &tsp_ctx->cpu_ctx, TSPD_SP_CTX_SIZE);
#endif
}
cm_el1_sysregs_context_restore(SECURE);
cm_set_elr_spsr_el3(SECURE, (uint64_t) &tsp_vectors->fiq_entry,
SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS));
cm_set_next_eret_context(SECURE);
/*
* Tell the TSP that it has to handle an FIQ synchronously. Also the
* instruction in normal world where the interrupt was generated is
* passed for debugging purposes. It is safe to retrieve this address
* from ELR_EL3 as the secure context will not take effect until
* el3_exit().
*/
SMC_RET2(&tsp_ctx->cpu_ctx, TSP_HANDLE_FIQ_AND_RETURN, read_elr_el3());
}
/*******************************************************************************
* This function is the handler registered for S-EL1 interrupts by the FIQD. It
* validates the interrupt and upon success arranges entry into the TSP at
* 'tsp_fiq_entry()' for handling the interrupt.
******************************************************************************/
static uint64_t fiqd_sel1_interrupt_handler(uint32_t id,
uint32_t flags,
void *handle,
void *cookie)
{
unsigned int iar;
/* Check the security state when the exception was generated */
assert(get_interrupt_src_ss(flags) == NON_SECURE);
#if IMF_READ_INTERRUPT_ID
/* Check the security status of the interrupt */
assert(plat_ic_get_interrupt_type(id) == INTR_TYPE_S_EL1);
#endif
/* Sanity check the pointer to this cpu's context */
assert(handle == cm_get_context(NON_SECURE));
/* Save the non-secure context before entering the TSP */
cm_el1_sysregs_context_save(NON_SECURE);
iar = get_ack_info();
ack_sgi(iar);
if(id == WDT_IRQ_BIT_ID)
{
/* FIX-ME : change 0xFE to the kernel online CPU mask */
fiq_smp_call_function(0xFE, aee_wdt_dump, 0, 0);
aee_wdt_dump();
}
if(id == FIQ_SMP_CALL_SGI)
{
fiq_icc_isr();
}
SMC_RET0(handle);
#if 0
/* Get a reference to this cpu's TSP context */
linear_id = platform_get_core_pos(mpidr);
tsp_ctx = &fiqd_sp_context[linear_id];
assert(&tsp_ctx->cpu_ctx == cm_get_context(SECURE));
/*
* Determine if the TSP was previously preempted. Its last known
* context has to be preserved in this case.
* The TSP should return control to the FIQD after handling this
* FIQ. Preserve essential EL3 context to allow entry into the
* TSP at the FIQ entry point using the 'cpu_context' structure.
* There is no need to save the secure system register context
* since the TSP is supposed to preserve it during S-EL1 interrupt
* handling.
*/
if (get_std_smc_active_flag(tsp_ctx->state)) {
tsp_ctx->saved_spsr_el3 = SMC_GET_EL3(&tsp_ctx->cpu_ctx,
CTX_SPSR_EL3);
tsp_ctx->saved_elr_el3 = SMC_GET_EL3(&tsp_ctx->cpu_ctx,
CTX_ELR_EL3);
}
cm_el1_sysregs_context_restore(SECURE);
cm_set_elr_spsr_el3(SECURE, (uint64_t) &tsp_vectors->fiq_entry,
SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS));
cm_set_next_eret_context(SECURE);
/*
* Tell the TSP that it has to handle an FIQ synchronously. Also the
* instruction in normal world where the interrupt was generated is
* passed for debugging purposes. It is safe to retrieve this address
* from ELR_EL3 as the secure context will not take effect until
* el3_exit().
*/
SMC_RET2(&tsp_ctx->cpu_ctx, TSP_HANDLE_FIQ_AND_RETURN, read_elr_el3());
#endif
}
