void vibtonz_pwm(int nForce)
{
static int prev_duty=0;
t_vib_desc *vib_iter =&vib_desc;
int pwm_period=0, pwm_duty = 0;
printk("%s : %d \n", __func__, nForce);
if( vib_iter->initialized == 0) return;
pwm_period = vib_iter->pwm_period;
pwm_duty = pwm_period/2 + ((pwm_period/2 - 2) *nForce) /127;
if(pwm_duty > vib_iter->pwm_duty)
{
pwm_duty = vib_iter->pwm_duty;
}
else if(pwm_period - pwm_duty > vib_iter->pwm_duty)
{
pwm_duty = pwm_period - vib_iter->pwm_duty;
}
pwm_set_period_ns(vib_iter->pwm,vib_iter->pwm_period);
pwm_set_polarity(vib_iter->pwm, vib_iter->pwm_polarity);
pwm_set_duty_ns(vib_iter->pwm, pwm_duty);
}
static PyObject *py_set_polarity(PyObject *self, PyObject *args, PyObject *kwargs){
char key[8];
char *channel;
int polarity = 0;
static char *kwlist[] = {"channel", "polarity", NULL};
if(!PyArg_ParseTupleAndKeywords(args, kwargs, "s|i", kwlist, &channel, &polarity))
return NULL;
if (polarity != 0 && polarity != 1)
{
PyErr_SetString(PyExc_ValueError, "polarity must be either 0 or 1");
return NULL;
}
if (!get_pwm_key(channel, key)) {
PyErr_SetString(PyExc_ValueError, "Invalid PWM key or name.");
return NULL;
}
if (pwm_set_polarity(key, polarity) == -1) {
PyErr_SetString(PyExc_RuntimeError, "You must start() the PWM channel first");
return NULL;
}
Py_RETURN_NONE;
}
static int __devinit pwm_ir_tx_probe(struct pwm_ir_dev *dev)
{
struct pwm_ir_data *data = dev->pdev->dev.platform_data;
int rc = 0;
if (data->reg_id) {
dev->reg = regulator_get(&dev->pdev->dev, data->reg_id);
if (IS_ERR(dev->reg)) {
dev_err(&dev->pdev->dev,
"failed to regulator_get(%s)\n",
data->reg_id);
return PTR_ERR(dev->reg);
}
}
dev->pwm = pwm_request(data->pwm_id, PWM_IR_NAME);
if (IS_ERR(dev->pwm)) {
dev_err(&dev->pdev->dev,
"failed to pwm_request(%d)\n",
data->pwm_id);
rc = PTR_ERR(dev->pwm);
goto err_regulator_put;
}
if (data->low_active) {
#if 0 /* need the latest kernel */
rc = pwm_set_polarity(dev->pwm, PWM_POLARITY_INVERSED);
#else
rc = -ENOSYS;
#endif
if (rc != 0) {
dev_err(&dev->pdev->dev, "failed to change polarity\n");
goto err_pwm_free;
}
}
rc = pwm_ir_tx_config(dev, 38000, 50);
if (rc != 0) {
dev_err(&dev->pdev->dev, "failed to change carrier and duty\n");
goto err_pwm_free;
}
dev->rdev->tx_ir = pwm_ir_tx_transmit;
dev->rdev->s_tx_carrier = pwm_ir_tx_carrier;
dev->rdev->s_tx_duty_cycle = pwm_ir_tx_duty_cycle;
return rc;
err_pwm_free:
pwm_free(dev->pwm);
err_regulator_put:
if (dev->reg)
regulator_put(dev->reg);
return rc;
}
void servo_init()
{
int i;
for(i=0;i<sizeof(servo_pin)/sizeof(servo_pin[0]);i++)
{
pwm_stop(servo_pin[i][0], servo_pin[i][1]);
pwm_set_period(servo_pin[i][0], servo_pin[i][1], SERVO_STD_PERIOD);
pwm_set_polarity(servo_pin[i][0], servo_pin[i][1], 1);
pwm_set_duty_cycle(servo_pin[i][0], servo_pin[i][1], SERVO_ANGLE_TO_DUTY(0)); /* keep in the middle */
}
start_servo();
}
int OSAL_Pwm_Set_Polarity(__hdle p_handler, int polarity)
{
int ret = 0;
struct pwm_device *pwm_dev;
pwm_dev = (struct pwm_device *)p_handler;
if(NULL == pwm_dev || IS_ERR(pwm_dev)) {
__wrn("OSAL_Pwm_Set_Polarity, handle is NULL!\n");
ret = -1;
} else {
ret = pwm_set_polarity(pwm_dev, polarity);
__inf("OSAL_Pwm_Set_Polarity pwm %d, active %s\n", pwm_dev->pwm, (polarity==0)? "high":"low");
}
return ret;
}
static ssize_t pwm_polarity_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
unsigned long polarity;
struct pwm_device *p = dev_get_drvdata(dev);
int ret;
if (!kstrtoul(buf, 10, &polarity)) {
ret = pwm_set_polarity(p, polarity);
if (ret < 0)
return ret;
}
return len;
}
static ssize_t pwm_test_store_polarity(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
int rc;
struct pwm_test *pwm_test = dev_get_drvdata(dev);
rc = kstrtoul(buf, 0, &pwm_test->polarity_s);
if (rc)
return rc;
rc = pwm_set_polarity(pwm_test->pwm, pwm_test->polarity_s);
if (rc) {
pr_err("operation failed %d\n", rc);
return rc;
}
pwm_test->polarity = pwm_test->polarity_s;
return count;
}
static ssize_t pwm_test_store_polarity(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
int rc;
struct pwm_test *pwm_test = dev_get_drvdata(dev);
int val;
enum pwm_polarity polarity;
rc = kstrtoint(buf, 0, &val);
if (rc)
return rc;
/* only zero and one allowed */
if (val != 0 && val != 1)
return -EINVAL;
polarity = val ? PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL;
/* same? don't do anything */
if (polarity == pwm_test->polarity)
return count;
/* polarity can only change when we stop the pwm */
if (pwm_test->run)
pwm_disable(pwm_test->pwm);
rc = pwm_set_polarity(pwm_test->pwm, polarity);
if (rc) {
dev_err(dev, "pwm_set_polarity failed\n");
if (pwm_test->run)
pwm_enable(pwm_test->pwm);
return rc;
}
if (pwm_test->run)
pwm_enable(pwm_test->pwm);
pwm_test->polarity = polarity;
return count;
}
static int pwm_backlight_probe(struct platform_device *pdev)
{
struct backlight_properties props;
struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
struct backlight_device *bl;
struct pwm_bl_data *pb;
int ret;
if (!data) {
dev_err(&pdev->dev, "failed to find platform data\n");
return -EINVAL;
}
if (data->init) {
ret = data->init(&pdev->dev);
if (ret < 0)
return ret;
}
pb = kzalloc(sizeof(*pb), GFP_KERNEL);
if (!pb) {
dev_err(&pdev->dev, "no memory for state\n");
ret = -ENOMEM;
goto err_alloc;
}
pb->period = data->pwm_period_ns;
pb->notify = data->notify;
pb->check_fb = data->check_fb;
pb->lth_brightness = data->lth_brightness *
(data->pwm_period_ns / data->max_brightness);
pb->dev = &pdev->dev;
pb->pwm = pwm_request(data->pwm_name, "backlight");
if (IS_ERR(pb->pwm)) {
dev_err(&pdev->dev, "unable to request PWM for backlight\n");
ret = PTR_ERR(pb->pwm);
goto err_pwm;
} else
dev_dbg(&pdev->dev, "got pwm for backlight\n");
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
props.max_brightness = data->max_brightness;
bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, pb,
&pwm_backlight_ops, &props);
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
ret = PTR_ERR(bl);
goto err_bl;
}
bl->props.brightness = data->dft_brightness;
pwm_set_polarity(pb->pwm, data->polarity);
backlight_update_status(bl);
platform_set_drvdata(pdev, bl);
return 0;
err_bl:
pwm_release(pb->pwm);
err_pwm:
kfree(pb);
err_alloc:
if (data->exit)
data->exit(&pdev->dev);
return ret;
}
int pwm_start(const char *key, float duty, float freq, int polarity)
{
char fragment[18];
char pwm_test_fragment[20];
char pwm_test_path[45];
char period_path[50];
char duty_path[50];
char polarity_path[55];
int period_fd, duty_fd, polarity_fd;
struct pwm_exp *new_pwm, *pwm;
if(!BBB_G(pwm_initialized)) {
initialize_pwm();
}
snprintf(fragment, sizeof(fragment), "bone_pwm_%s", key);
if (!load_device_tree(fragment)) {
//error enabling pin for pwm
return -1;
}
//creates the fragment in order to build the pwm_test_filename, such as "pwm_test_P9_13"
snprintf(pwm_test_fragment, sizeof(pwm_test_fragment), "pwm_test_%s", key);
//finds and builds the pwm_test_path, as it can be variable...
build_path(BBB_G(ocp_dir), pwm_test_fragment, pwm_test_path, sizeof(pwm_test_path));
//create the path for the period and duty
snprintf(period_path, sizeof(period_path), "%s/period", pwm_test_path);
snprintf(duty_path, sizeof(duty_path), "%s/duty", pwm_test_path);
snprintf(polarity_path, sizeof(polarity_path), "%s/polarity", pwm_test_path);
//add period and duty fd to pwm list
if ((period_fd = open(period_path, O_RDWR)) < 0)
return -1;
if ((duty_fd = open(duty_path, O_RDWR)) < 0) {
//error, close already opened period_fd.
close(period_fd);
return -1;
}
if ((polarity_fd = open(polarity_path, O_RDWR)) < 0) {
//error, close already opened period_fd and duty_fd.
close(period_fd);
close(duty_fd);
return -1;
}
// add to list
new_pwm = malloc(sizeof(struct pwm_exp));
if (new_pwm == 0) {
return -1; // out of memory
}
strncpy(new_pwm->key, key, KEYLEN); /* can leave string unterminated */
new_pwm->key[KEYLEN] = '\0'; /* terminate string */
new_pwm->period_fd = period_fd;
new_pwm->duty_fd = duty_fd;
new_pwm->polarity_fd = polarity_fd;
new_pwm->next = NULL;
if (exported_pwms == NULL)
{
// create new list
exported_pwms = new_pwm;
} else {
// add to end of existing list
pwm = exported_pwms;
while (pwm->next != NULL)
pwm = pwm->next;
pwm->next = new_pwm;
}
pwm_set_frequency(key, freq);
pwm_set_polarity(key, polarity);
pwm_set_duty_cycle(key, duty);
return 1;
}
static int ss_brcm_haptic_probe(struct platform_device *pdev)
{
struct platform_isa1000_vibrator_data *pdata = pdev->dev.platform_data;
t_vib_desc *vib_iter;
int ret=0;
printk("ss_brcm_haptic_probe \n");
/* vib_iter=kzalloc(sizeof(t_vib_desc), GFP_KERNEL);
if(vib_iter == NULL)
{
pr_err("%s : memory allocation failure \n", __func__);
return -ENOMEM;
} */
vib_iter=&vib_desc;
vib_iter->vib_vcc = (const char *)pdata->regulator_id;
printk(KERN_INFO "%s: Vibrator vcc=%s \n", __func__, vib_iter->vib_vcc);
//vib_iter->vib_regulator=regulator_get(NULL, VIB_VCC);
vib_iter->vib_regulator=regulator_get(NULL, vib_iter->vib_vcc);
if(IS_ERR(vib_iter->vib_regulator))
{
printk(KERN_INFO "%s: failed to get regulator \n", __func__);
return -ENODEV;
}
regulator_enable(vib_iter->vib_regulator);
vib_iter->gpio_en = pdata->gpio_en;
vib_iter->pwm = pwm_request(pdata->pwm_name, "vibrator");
if (IS_ERR(vib_iter->pwm))
{
pr_err("[VIB] Failed to request pwm.\n");
return -EFAULT;
}
vib_iter->pwm_duty = pdata->pwm_duty;
vib_iter->pwm_period = pdata->pwm_period_ns;
vib_iter->pwm_polarity = pdata->polarity;
pwm_set_polarity(vib_iter->pwm , vib_iter->pwm_polarity);
vib_iter->timed_dev.name="vibrator";
vib_iter->timed_dev.enable=vibrator_enable_set_timeout;
vib_iter->timed_dev.get_time=vibrator_get_remaining_time;
ret = timed_output_dev_register(&vib_iter->timed_dev);
if(ret < 0)
{
printk(KERN_ERR "Vibrator: timed_output dev registration failure\n");
timed_output_dev_unregister(&vib_iter->timed_dev);
}
init_timer(&vib_iter->vib_timer);
vib_iter->vib_timer.function = on_vibrate_timer_expired;
vib_iter->vib_timer.data = (unsigned long)vib_iter;
platform_set_drvdata(pdev, vib_iter);
INIT_WORK(&vib_iter->off_work, vibrator_off_work_func);
vib_iter->initialized = 1;
printk("%s : ss vibrator probe\n", __func__);
return 0;
}
void Pwm::set_polarity(Polarity polarity)
{
(CheckError)pwm_set_polarity(key_.c_str(), (int)polarity);
}
int pwm_start(const char *pinName, int exportNumber, char *pwmDir, float duty, float freq, int polarity, PwmChannel_t *pwm)
{
char pwm_control_path[PATHLEN];
char pwm_path[PATHLEN]; //pwm channel control folder
char export[2];
int fd;
strncpy(pwm->key, pinName, KEYLEN);
if (set_pinmux(pinName, "pwm") < 0)
{
return -1;
}
//export pwm channel
if ((fd = open("/sys/class/pwm/export", O_WRONLY)) < 0)
{
LogError("pwm open(/sys/class/pwm/export) fail (%s)\n", strerror(errno));
return -1;
}
snprintf(export, 2, "%i", exportNumber);
write(fd,export,1);
close(fd);
snprintf(pwm_path, sizeof(pwm_path), "/sys/class/pwm/%s", pwmDir);
//create the path for period control
snprintf(pwm_control_path, sizeof(pwm_control_path), "%s/period_ns", pwm_path);
if ((pwm->period_fd = open(pwm_control_path, O_WRONLY)) < 0)
{
LogError("pwm open(%s) fail (%s)\n", pwm_control_path, strerror(errno));
return -1;
}
snprintf(pwm_control_path, sizeof(pwm_control_path), "%s/duty_ns", pwm_path);
if ((pwm->duty_fd = open(pwm_control_path, O_WRONLY)) < 0) {
//error, close already opened period_fd.
LogError("pwm open(%s) fail (%s)\n", pwm_control_path, strerror(errno));
close(pwm->period_fd);
return -1;
}
snprintf(pwm_control_path, sizeof(pwm_control_path), "%s/polarity", pwm_path);
if ((pwm->polarity_fd = open(pwm_control_path, O_WRONLY)) < 0) {
LogError("pwm open(%s) fail (%s)\n", pwm_control_path, strerror(errno));
//error, close already opened period_fd and duty_fd.
close(pwm->period_fd);
close(pwm->duty_fd);
return -1;
}
snprintf(pwm_control_path, sizeof(pwm_control_path), "%s/run", pwm_path);
if ((pwm->run_fd = open(pwm_control_path, O_WRONLY)) < 0) {
LogError("pwm open(%s) fail (%s)\n", pwm_control_path, strerror(errno));
//error, close already opened period_fd and duty_fd.
close(pwm->polarity_fd);
close(pwm->period_fd);
close(pwm->duty_fd);
return -1;
}
pwm_set_frequency(pwm, freq);
pwm_set_polarity(pwm, polarity);
pwm_set_duty_cycle(pwm, duty);
pwm_set_run(pwm, 1);
return 0;
}
static int pwm_backlight_probe(struct platform_device *pdev)
{
struct backlight_properties props;
struct platform_pwm_backlight_data *data = NULL;
struct backlight_device *bl;
struct pwm_bl_data *pb;
const char *pwm_request_label = NULL;
int ret;
int bl_delay_on = 0;
printk("[BACKLIGHT] %s : %d\n", __func__, __LINE__);
if (pdev->dev.platform_data)
data = pdev->dev.platform_data;
else if (pdev->dev.of_node) {
u32 val;
data = kzalloc(sizeof(struct platform_pwm_backlight_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
if (of_property_read_u32(pdev->dev.of_node, "pwm-id", &val)) {
ret = -EINVAL;
goto err_read;
}
data->pwm_id = val;
if (of_property_read_u32(pdev->dev.of_node,
"max-brightness", &val)) {
ret = -EINVAL;
goto err_read;
}
data->max_brightness = val;
if (of_property_read_u32(pdev->dev.of_node,
"dft-brightness", &val)) {
ret = -EINVAL;
goto err_read;
}
data->dft_brightness = val;
if (of_property_read_u32(pdev->dev.of_node,
"polarity", &val)) {
ret = -EINVAL;
goto err_read;
}
data->polarity = val;
if (of_property_read_u32(pdev->dev.of_node,
"pwm-period-ns", &val)) {
ret = -EINVAL;
goto err_read;
}
data->pwm_period_ns = val;
if (of_property_read_string(pdev->dev.of_node,
"pwm-request-label", &pwm_request_label)) {
ret = -EINVAL;
goto err_read;
}
if (of_property_read_u32(pdev->dev.of_node,
"bl-on-delay", &val)) {
bl_delay_on = 0;
} else
bl_delay_on = val;
if (of_property_read_u32(pdev->dev.of_node,
"pwm_pin_name", &val)) {
pwm_pin = -1;
} else
pwm_pin = val;
if (of_property_read_u32(pdev->dev.of_node,
"pwm_pin_reboot_func", &val)) {
pwm_pin_reboot_func = -1;
} else
pwm_pin_reboot_func = val;
pdev->dev.platform_data = data;
}
if (!data) {
dev_err(&pdev->dev, "failed to find platform data\n");
return -EINVAL;
}
if (data->init) {
ret = data->init(&pdev->dev);
if (ret < 0)
return ret;
}
pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL);
if (!pb) {
dev_err(&pdev->dev, "no memory for state\n");
ret = -ENOMEM;
goto err_alloc;
}
pb->period = data->pwm_period_ns;
pb->notify = data->notify;
pb->notify_after = data->notify_after;
pb->check_fb = data->check_fb;
pb->lth_brightness = data->lth_brightness *
(data->pwm_period_ns / data->max_brightness);
pb->dev = &pdev->dev;
if (pdev->dev.of_node)
pb->pwm = pwm_request(data->pwm_id, pwm_request_label);
else
pb->pwm = pwm_request(data->pwm_id, "backlight");
if (IS_ERR(pb->pwm)) {
dev_err(&pdev->dev, "unable to request PWM for backlight\n");
ret = PTR_ERR(pb->pwm);
goto err_alloc;
} else
dev_dbg(&pdev->dev, "got pwm for backlight\n");
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
props.max_brightness = data->max_brightness;
//bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, pb,
// &pwm_backlight_ops, &props);
bl = backlight_device_register("panel", &pdev->dev, pb,
&pwm_backlight_ops, &props);
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
ret = PTR_ERR(bl);
goto err_bl;
}
bl->props.brightness = data->dft_brightness;
pwm_set_polarity(pb->pwm, data->polarity);
pr_info("pwm_backlight_probe bl-delay-on %d\r\n", bl_delay_on);
pr_info("pwm_backlight_probe pwm_pin %d\r\n", pwm_pin);
pr_info("pwm_backlight_probe pwm_pin_reboot_func %d\r\n", pwm_pin_reboot_func);
if (bl_delay_on == 0)
backlight_update_status(bl);
else {
INIT_DELAYED_WORK(&(pb->bl_delay_on_work), bl_delay_on_func);
schedule_delayed_work(&(pb->bl_delay_on_work),
msecs_to_jiffies(bl_delay_on));
}
platform_set_drvdata(pdev, bl);
#ifdef CONFIG_BACKLIGHT_USE_EARLYSUSPEND
pb->bd_early_suspend.suspend = backlight_driver_early_suspend;
pb->bd_early_suspend.resume = backlight_driver_late_resume;
pb->bd_early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN;
register_early_suspend(&pb->bd_early_suspend);
#endif
printk("[BACKLIGHT] %s : %d\n", __func__, __LINE__);
return 0;
err_bl:
pwm_free(pb->pwm);
err_alloc:
if (data->exit)
data->exit(&pdev->dev);
err_read:
if (pdev->dev.of_node)
kfree(data);
return ret;
}
