/// \function localtime([secs])
/// Convert a time expressed in seconds since Jan 1, 2000 into an 8-tuple which
/// contains: (year, month, mday, hour, minute, second, weekday, yearday)
/// If secs is not provided or None, then the current time from the RTC is used.
/// year includes the century (for example 2015)
/// month is 1-12
/// mday is 1-31
/// hour is 0-23
/// minute is 0-59
/// second is 0-59
/// weekday is 0-6 for Mon-Sun.
/// yearday is 1-366
STATIC mp_obj_t time_localtime(mp_uint_t n_args, const mp_obj_t *args) {
if (n_args == 0 || args[0] == mp_const_none) {
timeutils_struct_time_t tm;
// get the seconds from the RTC
timeutils_seconds_since_2000_to_struct_time(pyb_rtc_get_seconds(), &tm);
mp_obj_t tuple[8] = {
mp_obj_new_int(tm.tm_year),
mp_obj_new_int(tm.tm_mon),
mp_obj_new_int(tm.tm_mday),
mp_obj_new_int(tm.tm_hour),
mp_obj_new_int(tm.tm_min),
mp_obj_new_int(tm.tm_sec),
mp_obj_new_int(tm.tm_wday),
mp_obj_new_int(tm.tm_yday)
};
return mp_obj_new_tuple(8, tuple);
} else {
mp_int_t seconds = mp_obj_get_int(args[0]);
timeutils_struct_time_t tm;
timeutils_seconds_since_2000_to_struct_time(seconds, &tm);
mp_obj_t tuple[8] = {
tuple[0] = mp_obj_new_int(tm.tm_year),
tuple[1] = mp_obj_new_int(tm.tm_mon),
tuple[2] = mp_obj_new_int(tm.tm_mday),
tuple[3] = mp_obj_new_int(tm.tm_hour),
tuple[4] = mp_obj_new_int(tm.tm_min),
tuple[5] = mp_obj_new_int(tm.tm_sec),
tuple[6] = mp_obj_new_int(tm.tm_wday),
tuple[7] = mp_obj_new_int(tm.tm_yday),
};
return mp_obj_new_tuple(8, tuple);
}
}
STATIC mp_obj_t time_time(void) {
return mp_obj_new_int(pyb_rtc_get_seconds());
}
void wlan_sl_init (int8_t mode, const char *ssid, uint8_t ssid_len, uint8_t auth, const char *key, uint8_t key_len,
uint8_t channel, uint8_t antenna, bool add_mac) {
// stop the servers
wlan_servers_stop();
// do a basic start
wlan_first_start();
// close any active connections
wlan_sl_disconnect();
// Remove all profiles
ASSERT_ON_ERROR(sl_WlanProfileDel(0xFF));
// Enable the DHCP client
uint8_t value = 1;
ASSERT_ON_ERROR(sl_NetCfgSet(SL_IPV4_STA_P2P_CL_DHCP_ENABLE, 1, 1, &value));
// Set PM policy to normal
ASSERT_ON_ERROR(sl_WlanPolicySet(SL_POLICY_PM, SL_NORMAL_POLICY, NULL, 0));
// Unregister mDNS services
ASSERT_ON_ERROR(sl_NetAppMDNSUnRegisterService(0, 0));
// Stop the internal HTTP server
sl_NetAppStop(SL_NET_APP_HTTP_SERVER_ID);
// Remove all 64 filters (8 * 8)
_WlanRxFilterOperationCommandBuff_t RxFilterIdMask;
memset ((void *)&RxFilterIdMask, 0 ,sizeof(RxFilterIdMask));
memset(RxFilterIdMask.FilterIdMask, 0xFF, 8);
ASSERT_ON_ERROR(sl_WlanRxFilterSet(SL_REMOVE_RX_FILTER, (_u8 *)&RxFilterIdMask, sizeof(_WlanRxFilterOperationCommandBuff_t)));
#if MICROPY_HW_ANTENNA_DIVERSITY
// set the antenna type
wlan_set_antenna (antenna);
#endif
// switch to the requested mode
wlan_set_mode(mode);
// stop and start again (we need to in the propper mode from now on)
wlan_reenable(mode);
// Set Tx power level for station or AP mode
// Number between 0-15, as dB offset from max power - 0 will set max power
uint8_t ucPower = 0;
if (mode == ROLE_AP) {
ASSERT_ON_ERROR(sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, WLAN_GENERAL_PARAM_OPT_AP_TX_POWER, sizeof(ucPower),
(unsigned char *)&ucPower));
// configure all parameters
wlan_set_ssid (ssid, ssid_len, add_mac);
wlan_set_security (auth, key, key_len);
wlan_set_channel (channel);
// set the country
_u8* country = (_u8*)"EU";
ASSERT_ON_ERROR(sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE, 2, country));
SlNetCfgIpV4Args_t ipV4;
ipV4.ipV4 = (_u32)SL_IPV4_VAL(192,168,1,1); // _u32 IP address
ipV4.ipV4Mask = (_u32)SL_IPV4_VAL(255,255,255,0); // _u32 Subnet mask for this AP
ipV4.ipV4Gateway = (_u32)SL_IPV4_VAL(192,168,1,1); // _u32 Default gateway address
ipV4.ipV4DnsServer = (_u32)SL_IPV4_VAL(192,168,1,1); // _u32 DNS server address
ASSERT_ON_ERROR(sl_NetCfgSet(SL_IPV4_AP_P2P_GO_STATIC_ENABLE, IPCONFIG_MODE_ENABLE_IPV4,
sizeof(SlNetCfgIpV4Args_t), (_u8 *)&ipV4));
SlNetAppDhcpServerBasicOpt_t dhcpParams;
dhcpParams.lease_time = 4096; // lease time (in seconds) of the IP Address
dhcpParams.ipv4_addr_start = SL_IPV4_VAL(192,168,1,2); // first IP Address for allocation.
dhcpParams.ipv4_addr_last = SL_IPV4_VAL(192,168,1,254); // last IP Address for allocation.
ASSERT_ON_ERROR(sl_NetAppStop(SL_NET_APP_DHCP_SERVER_ID)); // Stop DHCP server before settings
ASSERT_ON_ERROR(sl_NetAppSet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT,
sizeof(SlNetAppDhcpServerBasicOpt_t), (_u8* )&dhcpParams)); // set parameters
ASSERT_ON_ERROR(sl_NetAppStart(SL_NET_APP_DHCP_SERVER_ID)); // Start DHCP server with new settings
// stop and start again
wlan_reenable(mode);
} else { // STA and P2P modes
ASSERT_ON_ERROR(sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, WLAN_GENERAL_PARAM_OPT_STA_TX_POWER,
sizeof(ucPower), (unsigned char *)&ucPower));
// set connection policy to Auto + Fast (tries to connect to the last connected AP)
ASSERT_ON_ERROR(sl_WlanPolicySet(SL_POLICY_CONNECTION, SL_CONNECTION_POLICY(1, 1, 0, 0, 0), NULL, 0));
}
// set current time and date (needed to validate certificates)
wlan_set_current_time (pyb_rtc_get_seconds());
// start the servers before returning
wlan_servers_start();
}
