static int qt1070_resume(struct i2c_client *client) { struct qt1070_data *data = i2c_get_clientdata(client); u16 new_key, old_key, keyval; int ret, i, mask; disable_irq_wake(client->irq); ret = qt1070_read(client, KEY_STATUS); old_key = data->key; data->key = new_key = ret; if (ret == 0x08) { mask = 0x01; for (i = 0; i < 7; i++) { keyval = new_key & mask; if ((old_key & mask) != keyval) { input_report_key(data->input, data->keycodes[i], keyval); } mask <<= 1; } input_sync(data->input); } ret = qt1070_read(client, DET_STATUS); return 0; }
static irqreturn_t qt1070_interrupt(int irq, void *dev_id) { struct qt1070_data *data = dev_id; struct i2c_client *client = data->client; struct input_dev *input = data->input; int i; u8 new_keys, keyval, mask = 0x01; /* Read the detected status register, thus clearing interrupt */ qt1070_read(client, DET_STATUS); /* Read which key changed */ new_keys = qt1070_read(client, KEY_STATUS); for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { keyval = new_keys & mask; if ((data->last_keys & mask) != keyval) input_report_key(input, data->keycodes[i], keyval); mask <<= 1; } input_sync(input); data->last_keys = new_keys; return IRQ_HANDLED; }
static irqreturn_t qt1070_interrupt(int irq, void *dev_id) { struct qt1070_data *data = dev_id; struct i2c_client *client = data->client; struct input_dev *input = data->input; unsigned short new_key, old_key, keyval; int ret, i, mask; /* Read the detected status register, using to clear interrupt */ ret = qt1070_read(client, DET_STATUS); /* Read which key changed */ ret = qt1070_read(client, KEY_STATUS); old_key = data->key; data->key = new_key = ret; mask = 0x01; for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { keyval = new_key & mask; if ((old_key & mask) != keyval) input_report_key(input, data->keycodes[i], keyval); mask <<= 1; } input_sync(input); return IRQ_HANDLED; }
static bool __devinit qt1070_identify(struct i2c_client *client) { int id, ver; /* Read Chip ID */ id = qt1070_read(client, CHIP_ID); if (id != QT1070_CHIP_ID) { dev_err(&client->dev, "ID %d not supported\n", id); return false; } /* Read firmware version */ ver = qt1070_read(client, FW_VERSION); if (ver < 0) { dev_err(&client->dev, "could not read the firmware version\n"); return false; } dev_info(&client->dev, "AT42QT1070 firmware version %x\n", ver); return true; }
static int __devinit qt1070_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct qt1070_data *data; struct input_dev *input; int i; int err; err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE); if (!err) { dev_err(&client->dev, "%s adapter not supported\n", dev_driver_string(&client->adapter->dev)); return -ENODEV; } if (!client->irq) { dev_err(&client->dev, "please assign the irq to this device\n"); return -EINVAL; } /* Identify the qt1070 chip */ if (!qt1070_identify(client)) return -ENODEV; data = kzalloc(sizeof(struct qt1070_data), GFP_KERNEL); input = input_allocate_device(); if (!data || !input) { dev_err(&client->dev, "insufficient memory\n"); err = -ENOMEM; goto err_free_mem; } data->client = client; data->input = input; data->irq = client->irq; input->name = "AT42QT1070 QTouch Sensor"; input->dev.parent = &client->dev; input->id.bustype = BUS_I2C; /* Add the keycode */ input->keycode = data->keycodes; input->keycodesize = sizeof(data->keycodes[0]); input->keycodemax = ARRAY_SIZE(qt1070_key2code); __set_bit(EV_KEY, input->evbit); for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { data->keycodes[i] = qt1070_key2code[i]; __set_bit(qt1070_key2code[i], input->keybit); } /* Calibrate device */ qt1070_write(client, CALIBRATE_CMD, 1); msleep(QT1070_CAL_TIME); /* Soft reset */ qt1070_write(client, RESET, 1); msleep(QT1070_RESET_TIME); err = request_threaded_irq(client->irq, NULL, qt1070_interrupt, IRQF_TRIGGER_NONE, client->dev.driver->name, data); if (err) { dev_err(&client->dev, "fail to request irq\n"); goto err_free_mem; } /* Register the input device */ err = input_register_device(data->input); if (err) { dev_err(&client->dev, "Failed to register input device\n"); goto err_free_irq; } i2c_set_clientdata(client, data); /* Read to clear the chang line */ qt1070_read(client, DET_STATUS); return 0; err_free_irq: free_irq(client->irq, data); err_free_mem: input_free_device(input); kfree(data); return err; }