void KArtsModule::slotTestSound()
{
if (configChanged && (userSavedChanges() == KMessageBox::Yes) || !artsdIsRunning() )
restartServer();
KProcess test;
test << "artsplay";
test << locate("sound", "KDE_Startup_1.ogg");
test.start(KProcess::DontCare);
}
void KArtsModule::save()
{
if (configChanged) {
configChanged = false;
saveParams();
restartServer();
updateWidgets();
}
emit changed( false );
}
TEST_F(ShardConnFixture, InvalidateBadConnInPool) {
ShardConnection conn1(TARGET_HOST, "test.user");
ShardConnection conn2(TARGET_HOST, "test.user");
ShardConnection conn3(TARGET_HOST, "test.user");
conn1.done();
conn3.done();
const uint64_t badCreationTime = mongo::curTimeMicros64();
killServer();
try {
conn2.get()->query("test.user", mongo::Query());
}
catch (const mongo::SocketException&) {
}
conn2.done();
restartServer();
checkNewConns(assertGreaterThan, badCreationTime, 10);
}
TEST_F(ShardConnFixture, BadConnClearsPoolWhenKilled) {
ShardConnection conn1(TARGET_HOST, "test.user");
ShardConnection conn2(TARGET_HOST, "test.user");
ShardConnection conn3(TARGET_HOST, "test.user");
conn1.done();
killServer();
try {
conn3.get()->query("test.user", mongo::Query());
}
catch (const mongo::SocketException&) {
}
restartServer();
const uint64_t badCreationTime = conn3.get()->getSockCreationMicroSec();
conn3.kill();
// attempting to put a 'bad' connection back to the pool
conn2.done();
checkNewConns(assertGreaterThan, badCreationTime, 10);
}
ServerWindow::ServerWindow(QWidget* parent)
:QWidget(parent)
{
setWindowTitle("Qt TasServer Ui");
monitor = new ServerMonitor();
statusButton = new QPushButton("Check status");
stopButton = new QPushButton("Stop");
startButton = new QPushButton("Start");
resetButton = new QPushButton ("Reset server");
loadPluginsButton = new QPushButton("Load Plugins");
#ifdef Q_OS_SYMBIAN
pluginButton = new QPushButton ("Enable tas");
autoStart = new QCheckBox("Autostart");
autoStart->setTristate(false);
if(monitor->autostartState()){
autoStart->setCheckState(Qt::Checked);
}
connect(autoStart, SIGNAL(toggled(bool)), monitor, SLOT(setAutoStart(bool)));
#endif
QLabel* stateLabel = new QLabel("Server state:");
QLabel* versionLabel = new QLabel("Server version:");
QLabel* stateValue = new QLabel("Unknown");
QLabel* versionValue = new QLabel(TAS_VERSION);
QLabel* hostBindingLabel = new QLabel("Server Address Binding:");
anyBindRadioButton = new QRadioButton("Any");
localBindRadioButton = new QRadioButton("Localhost");
anyBindRadioButton->setDisabled(true);
localBindRadioButton->setDisabled(true);
connect(monitor, SIGNAL(serverState(const QString&)), stateValue, SLOT(setText(const QString&)));
connect(monitor, SIGNAL(beginMonitor()), this, SLOT(disableButtons()));
connect(monitor, SIGNAL(stopMonitor()), this, SLOT(enableButtons()));
connect(monitor, SIGNAL(disableReBinding()), this, SLOT(disableRadioButtons()));
connect(monitor, SIGNAL(enableReBinding(const QString&)), this, SLOT(enableRadioButtons(const QString&)));
QTextEdit* editField = new QTextEdit();
editField->setReadOnly(true);
connect(monitor, SIGNAL(serverDebug(const QString&)), editField, SLOT(append(const QString&)));
connect(startButton, SIGNAL(clicked()), editField, SLOT(clear()));
connect(stopButton, SIGNAL(clicked()), editField, SLOT(clear()));
connect(resetButton, SIGNAL(clicked()), editField, SLOT(clear()));
connect(statusButton, SIGNAL(clicked()), editField, SLOT(clear()));
connect(loadPluginsButton, SIGNAL(clicked()), editField, SLOT(clear()));
connect(anyBindRadioButton, SIGNAL(clicked()), editField, SLOT(clear()));
connect(localBindRadioButton, SIGNAL(clicked()), editField, SLOT(clear()));
connect(anyBindRadioButton, SIGNAL(clicked()), monitor, SLOT(setAnyBinding()));
connect(localBindRadioButton, SIGNAL(clicked()), monitor, SLOT(setLocalBinding()));
#ifdef Q_OS_SYMBIAN
connect(pluginButton, SIGNAL(clicked()), editField, SLOT(clear()));
connect(pluginButton, SIGNAL(clicked()), monitor, SLOT(enablePluginLoad()));
#endif
connect(statusButton, SIGNAL(clicked()), monitor, SLOT(serverState()));
connect(stopButton, SIGNAL(clicked()), monitor, SLOT(stopServer()));
connect(startButton, SIGNAL(clicked()), monitor, SLOT(startServer()));
connect(resetButton, SIGNAL(clicked()), monitor, SLOT(restartServer()));
connect(loadPluginsButton, SIGNAL(clicked()),monitor, SLOT(loadPlugins()));
QPushButton* quitButton = new QPushButton("Quit");
connect(quitButton, SIGNAL(clicked()), qApp, SLOT(quit()));
QGridLayout* mainLayout = new QGridLayout();
mainLayout->addWidget(stateLabel, 0, 0, 1, 1);
mainLayout->addWidget(stateValue, 0, 1, 1, 1);
mainLayout->addWidget(versionLabel, 1, 0);
mainLayout->addWidget(versionValue, 1, 1);
// Server binding Radio
mainLayout->addWidget(hostBindingLabel, 2, 0);
mainLayout->addWidget(anyBindRadioButton, 2, 1);
mainLayout->addWidget(localBindRadioButton, 3, 1);
mainLayout->addWidget(editField, 4,0, 1, 2);
#ifdef Q_OS_SYMBIAN
mainLayout->addWidget(statusButton, 5, 0);
mainLayout->addWidget(pluginButton, 5, 1);
#else
mainLayout->addWidget(statusButton, 5, 0);
mainLayout->addWidget(loadPluginsButton, 5, 1);
#endif
mainLayout->addWidget(stopButton, 6, 0);
mainLayout->addWidget(startButton, 6, 1);
mainLayout->addWidget(resetButton, 7, 0);
mainLayout->addWidget(quitButton, 7, 1);
#ifdef Q_OS_SYMBIAN
mainLayout->addWidget(autoStart, 8, 0);
mainLayout->addWidget(loadPluginsButton, 8, 1);
#endif
setLayout(mainLayout);
// QRect rect = qApp->desktop()->screenGeometry();
// if(rect.width() > 864)
// setFixedSize(350,600);
// else{
// showFullScreen();
// }
}
/**
* 构造函数传入WorkingStatus status初始化界面
* @param newsinglewidgetapp 是否为单一界面程序（采集程序有可能为单一界面程序，其结束方式与复界面程序不用） @see closeEvent方法
* @param status 工作状态，@see status.h
* Collecting = 1 采集时
* Calculating_Backuping = 5 计算备份同时进行
*/
MainWidget::MainWidget(bool newsinglewidgetapp, WorkingStatus initstatus, QWidget *parent) :
QWidget(parent),
ui(new Ui::MainWidget)
{
ui->setupUi(this);
// 初始化结束方式
singlewidgetapp = newsinglewidgetapp;
// 初始化工作状态
workingstatus = initstatus;
// 初始时采集工程文件名为空
projectfilename = "";
// 默认用户不知道是谁
currentusername = "******";
// 在主界面连接主控底层服务信号槽
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(makeGUIActive(WorkingStatus, bool)), this, SLOT(msgToGUICreateProjectWidget(WorkingStatus, bool)));
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(signalMsgToGUI(WorkingStatus, QString)), this, SLOT(appendMsg(WorkingStatus, QString)));
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(signalErrorToGUI(WorkingStatus, QString)), this, SLOT(appendError(WorkingStatus, QString)));
// [采集转发消息]
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(signalToLights(HardwareType, QString, HardwareStatus)), this, SLOT(changeHardwareStatus(HardwareType, QString, HardwareStatus)));
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(signalToCameraFC(QString, qint64)), this, SLOT(changeCameraFC_slot(QString, qint64)));
// [采集、计算、备份转发消息]
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(signalToCameraTask(WorkingStatus, QString, int, QString, QString)), this, SLOT(changeSlaveCameraTask_slot(WorkingStatus, QString, int, QString, QString)));
// [计算转发消息]
// 每个从控每个线程每个任务帧号反馈消息转发
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(signalToCameraTaskFC(WorkingStatus, QString, int, QString, long long)), this, SLOT(changeSlaveCameraTaskFC_slot(WorkingStatus, QString, int, QString, long long)));
// 每个从控每个线程每个任务初始化界面（起始帧、终止帧）消息转发
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(signalToSlaveCameraTaskFC_init(WorkingStatus, QString, int, QString, long long, long long)), this, SLOT(changeSlaveCameraTaskFC_init_slot(WorkingStatus, QString, int, QString, long long, long long)));
// [计算备份转发消息]
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(calcubackupProgressingBar(WorkingStatus, QString, int, int, int, bool)), this, SLOT(changecalcubackupProgressingBar_slot(WorkingStatus, QString, int, int, int, bool)));
connect(MasterProgram::getMasterProgramInstance(), SIGNAL(turnOffAllHardware()), this, SLOT(turnOffLights()));
//connect(MasterProgram::getMasterProgramInstance(), SIGNAL(makeGUIActive(bool)), this, SLOT(getCalcuBackupGUIActive(bool)));
// 重启服务器按钮信号槽
connect(ui->restartServerButton, SIGNAL(clicked()), this, SLOT(restartServer()));
// 关闭服务器
connect(ui->closeServerButton, SIGNAL(clicked()), this, SLOT(closeServer()));
// 初始时关闭所有提示灯
turnOffLights();
// 开启网络连接从控计算机提示灯
initConnectedSlaves();
/******设置采集机、备份机、相机的状态，正常或者不正常**********/
// statuscollectmessage为从控机发送过来的采集机和备份机的状态信息，如0表示正常，则显示为黄色，1表示异常，则显示为红色。
// if 采集机异常
// ui->slave1Label_net->setPixmap(QPixmap(":/image/lightred.png"));
this->setWindowTitle(QObject::tr("铁路隧道建筑限界测量系统-主控终端"));
QIcon icon;
icon.addFile(QString::fromUtf8(":image/icon.png"), QSize(), QIcon::Normal, QIcon::Off);
this->setWindowIcon(icon);
// 功能，设置小图标变灰
ui->collectstatuslabel->setPixmap(QString::fromUtf8(":image//collectstatus1_2.png"));
ui->backupstatuslabel->setPixmap(QString::fromUtf8(":image//up_alt_2.png"));
ui->calculatestatuslabel->setPixmap(QString::fromUtf8(":image//Calculatorstatus1_2.png"));
// 导入已有工程、创建新工程界面
CreateProjectWidget * cpwidget = new CreateProjectWidget(workingstatus, ui->createprojwidget);
connect(cpwidget, SIGNAL(sendproject_file_name(QString)), this, SLOT(slotprojectfilename(QString)));
connect(this, SIGNAL(setCreateProjectWidgetEnabled(bool)), cpwidget, SLOT(setWidgetEnabled(bool)));
// @author 范翔 3个界面合二为一之后，关闭重启服务器两个按钮无效
ui->closeServerButton->setVisible(false);
ui->restartServerButton->setVisible(false);
if (workingstatus == Collecting)
{
// Tab界面布局
// ui->gridLayout_5是整个Window的最外层布局Layout。可从.ui文件中找出
ui->gridLayout_5->addWidget(ui->page, 4, 0);
CollectWidget * collectWidget = new CollectWidget(ui->page, MasterSetting::getSettingInstance()->getDefaultDistanceMode());
QGridLayout *layout5 = new QGridLayout();
layout5->addWidget(collectWidget);
ui->page->setLayout(layout5);
// 得到帧间隔里程
connect(this, SIGNAL(sendproject_file_name(QString)), collectWidget,SLOT(getDistanceMode(QString)));
// 界面信号槽
connect(this, SIGNAL(changeCameraStatus(QString,HardwareStatus)), collectWidget, SLOT(changeCamera(QString, HardwareStatus)));
connect(this, SIGNAL(changeLayserStatus(QString,HardwareStatus)), collectWidget, SLOT(changeLayser(QString, HardwareStatus)));
connect(this, SIGNAL(changeCameraFC(QString,qint64)), collectWidget, SLOT(changeCameraFC(QString, qint64)));
connect(this, SIGNAL(changeSlaveCameraTask(WorkingStatus, QString, int, QString, QString)), collectWidget, SLOT(changeCameraTask(WorkingStatus, QString, int, QString, QString)));
connect(this, SIGNAL(turnOffAllHardware()), collectWidget, SLOT(turnOffHardwares()), Qt::DirectConnection);
collectWidget->turnOffHardwares();
// 【标记1】此处作废
// 因为有master的单一实例模式+各种对应方法，此处无需接受底层界面发送的消息了，因为底层界面可以直接调用各类主控方法
//connect(calcuWidget,SIGNAL(clicked111()),this,SLOT(sendToMaster(QString)));
// 可以导入已有、创建新工程
connect(ui->operationConfigButton, SIGNAL(clicked()), this, SLOT(configCurrentOperation()));
connect(ui->operationConfigButton2, SIGNAL(clicked()), this, SLOT(configCurrentOperation2()));
// 初始时的界面显示
ui->page->setVisible(true);
// projectclass
projectclass = LzProjectClass::Collect;
projectclassstr = "collect";
}
