SR_PRIV int rigol_ds_receive(int fd, int revents, void *cb_data)
{
struct sr_dev_inst *sdi;
struct sr_scpi_dev_inst *scpi;
struct dev_context *devc;
struct sr_datafeed_packet packet;
struct sr_datafeed_analog_old analog;
struct sr_datafeed_logic logic;
double vdiv, offset;
int len, i, vref;
struct sr_channel *ch;
gsize expected_data_bytes;
(void)fd;
if (!(sdi = cb_data))
return TRUE;
if (!(devc = sdi->priv))
return TRUE;
scpi = sdi->conn;
if (!(revents == G_IO_IN || revents == 0))
return TRUE;
switch (devc->wait_event) {
case WAIT_NONE:
break;
case WAIT_TRIGGER:
if (rigol_ds_trigger_wait(sdi) != SR_OK)
return TRUE;
if (rigol_ds_channel_start(sdi) != SR_OK)
return TRUE;
return TRUE;
case WAIT_BLOCK:
if (rigol_ds_block_wait(sdi) != SR_OK)
return TRUE;
break;
case WAIT_STOP:
if (rigol_ds_stop_wait(sdi) != SR_OK)
return TRUE;
if (rigol_ds_check_stop(sdi) != SR_OK)
return TRUE;
if (rigol_ds_channel_start(sdi) != SR_OK)
return TRUE;
return TRUE;
default:
sr_err("BUG: Unknown event target encountered");
break;
}
ch = devc->channel_entry->data;
expected_data_bytes = ch->type == SR_CHANNEL_ANALOG ?
devc->analog_frame_size : devc->digital_frame_size;
if (devc->num_block_bytes == 0) {
if (devc->model->series->protocol >= PROTOCOL_V4) {
if (sr_scpi_send(sdi->conn, ":WAV:START %d",
devc->num_channel_bytes + 1) != SR_OK)
return TRUE;
if (sr_scpi_send(sdi->conn, ":WAV:STOP %d",
MIN(devc->num_channel_bytes + ACQ_BLOCK_SIZE,
devc->analog_frame_size)) != SR_OK)
return TRUE;
}
if (devc->model->series->protocol >= PROTOCOL_V3)
if (sr_scpi_send(sdi->conn, ":WAV:DATA?") != SR_OK)
return TRUE;
if (sr_scpi_read_begin(scpi) != SR_OK)
return TRUE;
if (devc->format == FORMAT_IEEE488_2) {
sr_dbg("New block header expected");
len = rigol_ds_read_header(sdi);
if (len == 0)
/* Still reading the header. */
return TRUE;
if (len == -1) {
sr_err("Read error, aborting capture.");
packet.type = SR_DF_FRAME_END;
sr_session_send(cb_data, &packet);
sdi->driver->dev_acquisition_stop(sdi, cb_data);
return TRUE;
}
/* At slow timebases in live capture the DS2072
* sometimes returns "short" data blocks, with
* apparently no way to get the rest of the data.
* Discard these, the complete data block will
* appear eventually.
*/
if (devc->data_source == DATA_SOURCE_LIVE
&& (unsigned)len < expected_data_bytes) {
sr_dbg("Discarding short data block");
sr_scpi_read_data(scpi, (char *)devc->buffer, len + 1);
return TRUE;
}
devc->num_block_bytes = len;
} else {
devc->num_block_bytes = expected_data_bytes;
}
devc->num_block_read = 0;
}
len = devc->num_block_bytes - devc->num_block_read;
if (len > ACQ_BUFFER_SIZE)
len = ACQ_BUFFER_SIZE;
sr_dbg("Requesting read of %d bytes", len);
len = sr_scpi_read_data(scpi, (char *)devc->buffer, len);
if (len == -1) {
sr_err("Read error, aborting capture.");
packet.type = SR_DF_FRAME_END;
sr_session_send(cb_data, &packet);
sdi->driver->dev_acquisition_stop(sdi, cb_data);
return TRUE;
}
sr_dbg("Received %d bytes.", len);
devc->num_block_read += len;
if (ch->type == SR_CHANNEL_ANALOG) {
vref = devc->vert_reference[ch->index];
vdiv = devc->vdiv[ch->index] / 25.6;
offset = devc->vert_offset[ch->index];
if (devc->model->series->protocol >= PROTOCOL_V3)
for (i = 0; i < len; i++)
devc->data[i] = ((int)devc->buffer[i] - vref) * vdiv - offset;
else
for (i = 0; i < len; i++)
devc->data[i] = (128 - devc->buffer[i]) * vdiv - offset;
analog.channels = g_slist_append(NULL, ch);
analog.num_samples = len;
analog.data = devc->data;
analog.mq = SR_MQ_VOLTAGE;
analog.unit = SR_UNIT_VOLT;
analog.mqflags = 0;
packet.type = SR_DF_ANALOG_OLD;
packet.payload = &analog;
sr_session_send(cb_data, &packet);
g_slist_free(analog.channels);
} else {
logic.length = len;
// TODO: For the MSO1000Z series, we need a way to express that
// this data is in fact just for a single channel, with the valid
// data for that channel in the LSB of each byte.
logic.unitsize = devc->model->series->protocol == PROTOCOL_V4 ? 1 : 2;
logic.data = devc->buffer;
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
sr_session_send(cb_data, &packet);
}
if (devc->num_block_read == devc->num_block_bytes) {
sr_dbg("Block has been completed");
if (devc->model->series->protocol >= PROTOCOL_V3) {
/* Discard the terminating linefeed */
sr_scpi_read_data(scpi, (char *)devc->buffer, 1);
}
if (devc->format == FORMAT_IEEE488_2) {
/* Prepare for possible next block */
devc->num_header_bytes = 0;
devc->num_block_bytes = 0;
if (devc->data_source != DATA_SOURCE_LIVE)
rigol_ds_set_wait_event(devc, WAIT_BLOCK);
}
if (!sr_scpi_read_complete(scpi)) {
sr_err("Read should have been completed");
packet.type = SR_DF_FRAME_END;
sr_session_send(cb_data, &packet);
sdi->driver->dev_acquisition_stop(sdi, cb_data);
return TRUE;
}
devc->num_block_read = 0;
} else {
sr_dbg("%" PRIu64 " of %" PRIu64 " block bytes read",
devc->num_block_read, devc->num_block_bytes);
}
devc->num_channel_bytes += len;
if (devc->num_channel_bytes < expected_data_bytes)
/* Don't have the full data for this channel yet, re-run. */
return TRUE;
/* End of data for this channel. */
if (devc->model->series->protocol == PROTOCOL_V3) {
/* Signal end of data download to scope */
if (devc->data_source != DATA_SOURCE_LIVE)
/*
* This causes a query error, without it switching
* to the next channel causes an error. Fun with
* firmware...
*/
rigol_ds_config_set(sdi, ":WAV:END");
}
if (devc->channel_entry->next) {
/* We got the frame for this channel, now get the next channel. */
devc->channel_entry = devc->channel_entry->next;
rigol_ds_channel_start(sdi);
} else {
/* Done with this frame. */
packet.type = SR_DF_FRAME_END;
sr_session_send(cb_data, &packet);
if (++devc->num_frames == devc->limit_frames) {
/* Last frame, stop capture. */
sdi->driver->dev_acquisition_stop(sdi, cb_data);
} else {
/* Get the next frame, starting with the first channel. */
devc->channel_entry = devc->enabled_channels;
rigol_ds_capture_start(sdi);
/* Start of next frame. */
packet.type = SR_DF_FRAME_BEGIN;
sr_session_send(cb_data, &packet);
}
}
return TRUE;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct sr_scpi_dev_inst *scpi;
struct dev_context *devc;
struct sr_channel *ch;
struct sr_datafeed_packet packet;
gboolean some_digital;
GSList *l;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
scpi = sdi->conn;
devc = sdi->priv;
devc->num_frames = 0;
some_digital = FALSE;
for (l = sdi->channels; l; l = l->next) {
ch = l->data;
sr_dbg("handling channel %s", ch->name);
if (ch->type == SR_CHANNEL_ANALOG) {
if (ch->enabled)
devc->enabled_channels = g_slist_append(
devc->enabled_channels, ch);
if (ch->enabled != devc->analog_channels[ch->index]) {
/* Enabled channel is currently disabled, or vice versa. */
if (rigol_ds_config_set(sdi, ":CHAN%d:DISP %s", ch->index + 1,
ch->enabled ? "ON" : "OFF") != SR_OK)
return SR_ERR;
devc->analog_channels[ch->index] = ch->enabled;
}
} else if (ch->type == SR_CHANNEL_LOGIC) {
/* Only one list entry for DS1000D series. All channels are retrieved
* together when this entry is processed. */
if (ch->enabled && (
devc->model->series->protocol > PROTOCOL_V2 ||
!some_digital))
devc->enabled_channels = g_slist_append(
devc->enabled_channels, ch);
if (ch->enabled) {
some_digital = TRUE;
/* Turn on LA module if currently off. */
if (!devc->la_enabled) {
if (rigol_ds_config_set(sdi,
devc->model->series->protocol >= PROTOCOL_V4 ?
":LA:STAT ON" : ":LA:DISP ON") != SR_OK)
return SR_ERR;
devc->la_enabled = TRUE;
}
}
if (ch->enabled != devc->digital_channels[ch->index]) {
/* Enabled channel is currently disabled, or vice versa. */
if (rigol_ds_config_set(sdi,
devc->model->series->protocol >= PROTOCOL_V4 ?
":LA:DIG%d:DISP %s" : ":DIG%d:TURN %s", ch->index,
ch->enabled ? "ON" : "OFF") != SR_OK)
return SR_ERR;
devc->digital_channels[ch->index] = ch->enabled;
}
}
}
if (!devc->enabled_channels)
return SR_ERR;
/* Turn off LA module if on and no digital channels selected. */
if (devc->la_enabled && !some_digital)
if (rigol_ds_config_set(sdi,
devc->model->series->protocol >= PROTOCOL_V4 ?
":LA:STAT OFF" : ":LA:DISP OFF") != SR_OK)
return SR_ERR;
/* Set memory mode. */
if (devc->data_source == DATA_SOURCE_SEGMENTED) {
sr_err("Data source 'Segmented' not yet supported");
return SR_ERR;
}
devc->analog_frame_size = analog_frame_size(sdi);
devc->digital_frame_size = digital_frame_size(sdi);
switch (devc->model->series->protocol) {
case PROTOCOL_V2:
if (rigol_ds_config_set(sdi, ":ACQ:MEMD LONG") != SR_OK)
return SR_ERR;
break;
case PROTOCOL_V3:
/* Apparently for the DS2000 the memory
* depth can only be set in Running state -
* this matches the behaviour of the UI. */
if (rigol_ds_config_set(sdi, ":RUN") != SR_OK)
return SR_ERR;
if (rigol_ds_config_set(sdi, ":ACQ:MDEP %d",
devc->analog_frame_size) != SR_OK)
return SR_ERR;
if (rigol_ds_config_set(sdi, ":STOP") != SR_OK)
return SR_ERR;
break;
default:
break;
}
if (devc->data_source == DATA_SOURCE_LIVE)
if (rigol_ds_config_set(sdi, ":RUN") != SR_OK)
return SR_ERR;
sr_scpi_source_add(sdi->session, scpi, G_IO_IN, 50,
rigol_ds_receive, (void *)sdi);
std_session_send_df_header(sdi);
devc->channel_entry = devc->enabled_channels;
if (rigol_ds_capture_start(sdi) != SR_OK)
return SR_ERR;
/* Start of first frame. */
packet.type = SR_DF_FRAME_BEGIN;
sr_session_send(sdi, &packet);
return SR_OK;
}
